SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248

• Can Be Installed On Wet Lines And Pressure Tested Immediately.
• Stainless steel retainer adds strength and durability.
• High-performance DZR lead-free brass body.
• No special tools, crimping, soldering or glue required.

Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

Sharkbite Max Flex Water Heater Connector 1/2" X 3/4"Fip X 18". Mfg #UR3068FX18

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

Sharkbite Max Flex Water Heater Connector 1/2" X 3/4"Fip X 24". Mfg #UR3068FX24

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

Sharkbite Sharkbite Max Flex Coupling Hose 3/4" X 18". Mfg #UR3016FX18

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

• The Rheem Professional Classic 28 Gal. Electric short water heater provides an ample supply of hot water for households with 1 to 2 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional Classic 28 Gal. Lowboy 6-Year 240-Volt 4500-Watt Electric Tank Water Heater, Top T&p Valve
• Electric Water Heater Is Easy To Maintain
• Delivers 45 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Temperature And Pressure Relief Valve Included
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE28 S2 RH95 (CP)

Use this plastic drain pan under your electric water heater to help prevent damage to finished surfaces in the event of a leak from your water heater. It is constructed of durable, flexible polypropylene that will not corrode or crack while installing the water heater. It has a pre-cut drain hole and the PVC fitting is included. It should be plumbed to the outside of the structure, away from finished surfaces, if the water heater is installed inside of the structure or elsewhere where a leak from the unit could cause damage to finished surfaces.

• Made for use under an electric water heater
• Injection-molded polypropylene plastic
• Recyclable
• Black
• PVC drain fitting included
• 28 in. I.D.
• 30 in. O.D.
• Pre-cut drain hole
• Non-toxic
• Recommended that pan has an inside diameter 2 in. - 4 in. larger than the diameter of your water heater tank

The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.

• Secures expansion tank to wall
• Galvanized and stainless steel construction
• Supports tanks up to 13 in. Dia
• Supports tanks up to 5 Gal.
• Includes mounting bracket, 2 support straps and mounting screws
• Quick-release stainless steel bands
• Fast and easy installation
• Takes load weight off pipes
• HOLDRITE quick strap brand
• Water heater accessories

• The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
• Rheem Professional 38 Gal. 240-Volt 4500-Watt Short Residential Electric Water Heater
• Delivers 51 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Short Tank Fits In Tight Applications
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• With ProtectionPlusâ„¢ the 6-year limited tank warranty becomes 10-year
• MFG# PROE38 S2 RH95 B (4500W/240V)

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

• The Rheem Classic 40 Gal. Natural Gas 38000 BTU/hour environmentally friendly Ultra Low-NOx radiant burner that provides ample hot water for households with 2 to 4 people. A piezo ignition system enables safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.
• Rheem Professional Classic 40 Gal. Tall 38,000 BTU Low NOx Natural Gas Water Heater
• California & Utah Residents (Utah Effective 7/1/18): This Water Heater Model Meets Or Exceeds Ultra-Low Nox (Uln) Emissions Requirements For All Air Quality Management Districts
• Rated For Installations Up To 10,000 Ft.
• Exclusive Air/Fuel Shut-Off Device For Double Protection
• With Protection Plus The 6-Year Limited Tank Warranty Becomes 10-Year
• Ultra-Low Nox Radiant Burner Design
• Premium Grade Anode Rode Provides Long-Lasting Tank Protection
• 6-Year Limited Tank And Parts Warranty
• Maintenance Free - No Filter To Clean
• No Matches Required
• More Hot Water At A Low Operating Cost
• With Protection Plus The 6-Years Limited Tank Warranty Becomes 10-Years
• Uniform Energy Factor (Uef) 0.58
• Everkleen Patented System Fights Sediment Build-Up
• Enhanced-Flow Brass Drain Valve
• MFG# PROG40-38U RH62 EC1-1

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

• A. O. Smith ProMax Electric Water Heater. 28 Gal. Lowboy. 20" Dia x 30". Top Water Connections And Top TP Valve. 240 Volts 4500 Watt Long-Life Stainless Steel Elements. DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life. Blue Diamond Tank Lining Provides Protection Against Leaks. CoreGuard Anode Rod Is Industry-Leading Anode Technology To Extend Useful Life. Full-Flow Tamper-Resistant Brass Drain Valve. 0.89 Uniform Energy Factor. Meets 2015 NAECA Efficiency Standards. For Top-To-Side TP Drain Connection Use With HDS #730092 Conversion Kit. 8-Year Warranty For Units Purchased After 1/31/2021. Mfg #ENLB-30
• A. O. Smith ProMax Electric Water Heater
• 28 Gal
• Lowboy
• 20" Dia X 30"
• Top Water Connections And Top T&p Valve
• 240 Volts, 4,500 Watt Long-Life Stainless Steel Elements
• Dynaclean Diffuser System Reduces Sediment Buildup, Extending Tank Life
• Blue Diamond Tank Lining Provides Protection Against Leaks
• Coreguard Anode Rod Is Industry-Leading Anode Technology To Extend Useful Life
• Full-Flow Tamper-Resistant Brass Drain Valve
• 0.89 Uniform Energy Factor
• Meets 2015 Naeca Efficiency Standards
• For Top-To-Side T&p Drain Connection Use With Hds #730092 Conversion Kit
• 8-Year Warranty (For Units Purchased After 1/31/2021)
• MFG# ENLB-30

The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.

• Made from durable polypropylene plastic
• Will not corrode or crack
• 26 in. ID
• 28 in. OD
• 1-1.5 in. PVC fitting included
• Pre-cut side outlet
• Recyclable
• Non-toxic
• Black finish
• Use with electric water heaters only

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

The Rheem Performance 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6 year limited tank and parts warranty plus a 1-year in home labor warranty.

• Washington and Oregon residents: your home is in a state that requires demand response water heaters, if this water heater does not meet demand response requirements, please select an approved demand response model available on homedepot.com.
• 40 Gal. tank provides ample hot water for households with 2-people to 4-people
• Electric water heater is easy to maintain
• Delivers 53 Gal. of hot water in the first hour
• 6 year limited warranty on tank and parts for your convenience
• 1 year in home labor warranty for peace of mind
• Automatic thermostat keeps water at your desired temperature
• Dual 4500-Watt heating elements
• Designed for easy replacement of your existing water heater
• Requires a 240-Volt connection for installation
• Medium tank profile fits in a variety of indoor spaces
• Uniform energy factor 0.93
• Now features a brass drain valve for added resiliency & durability
• Meets 2015 NAECA Standards

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (4-passes)

The Fluidmaster B1H18 18 in. Water Heater Connector is a top choice when replacing your water heater supply line. Installation is fast and easy, with easy grip brass hex nuts, and exceptional flexibility that resists kinks or creases in the tightest spaces. This replacement water heater connector fits 3/4 in. F.I.P. x 3/4 in. F.I.P. connections. Designed with quality in mind this water heater connector showcases a 5 year warranty, durable braided stainless steel materials, and nickel plated heavy duty brass hex nuts. Replace old, creased, or problem water heater connectors with a quality you can trust. Lead free and meeting all code requirements. Upgrade your water heater supply line now, to a Fluidmaster Connector.

• Highly flexible water heater connector that resists kinks and creases
• Easy to install, the heavy-duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P
• 18 in. L
• Lead free, and meeting all code requirements
• Quickly replace risky faulty and old connector models
• 5 year warranty
• Featuring a durable build from braided stainless steel
• Highly flexible to resist kinks and creases in tight spaces
• Repair parts that are made to last

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

• Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
• Easy to install
• Durable braided stainless steel build
• Highly flexible to resist kinks and creases in tight spaces
• Heavy duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
• 24 in. L
• Lead free and meeting all code requirements
• 5-year warranty

The Camco 11360 24 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• For electric water heaters only
• 24 in. ID ; 26 in. OD
• Recyclable
• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipe
• 2.5 in. H
• Pans are injection molded for superior strength and durability

Sharkbite Max Ball Valve Slip 3/4" Model UR24736. Mfg #UR24736

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability

The Rheem Performance 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty plus a 1-year in home labor warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.

• Washington (Effective 1/1/23) and Oregon (Effective 7/1/23) residents: this water heater does not meet demand response requirements, regulations prohibit the sale, shipment or installation of this water heater in a state that requires demand response water heaters
• Your home is in a state that requires demand response water heaters, please select an approved demand response model available on homedepot.com
• Electric water heater is easy to maintain
• Delivers 51 gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• 1-year in home labor warranty for peace of mind
• Short tank fits in tight applications
• 0.92 uniform energy factor signifies an energy efficient water heater
• Adjustable thermostat to adjust water temperature to meet your hot water needs
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Now features a brass drain valve for added resiliency & durability
• Designed for easy replacement of your existing water heater
• Meets 2015 NAECA Standards

• The Rheem Professional Classic 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional 40 Gal. Medium Electric Water Heater
• 40 Gal. Tank Provides Ample Hot Water For Households With 2 People To 4 People
• Delivers 55 Gal. Of Hot Water In The First Hour
• Uniform Energy Factor 0.93
• Dual 4500 Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240 Volt Connection For Installation
• Medium Tank Profile Fits In A Variety Of Indoor Spaces
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Electric Junction Box Located Above Heating Elements For Easy Installation
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE40 M2 RH95 (4500W)

• The Rheem Professional Classic 50 Gal. Electric tall water heater provides an ample supply of hot water for households with 3 people to 5 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed top temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional 50 Gal. Tall 6 Year 240-Vac 4500-Watt Electric Water Heater
• 50 Gal. Tank Provides Ample Hot Water For Households With 3 People To 5 People
• Delivers 63 Gal. Of Hot Water In The First Hour
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Uniform Energy Factor 0.93
• Requires A 240-Volt Connection For Installation
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE50 T2 RH95 (4500W)

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a screw plug spud receptacle

• The Rheem Professional Classic 47 Gal. Electric short water heater provides an ample supply of hot water for households with 3 people to 5 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional Classic 47 Gal. Lowboy 6-Year 240-Volt 4500-Watt Electric Tank Water Heater
• Isolated Tank Design Reduces Conductive Heat Loss
• Requires A 240-Volt Connection For Installation
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Electric Junction Box Located Above Heating Elements For Easy Installation
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Automatic Thermostat Keeps Water At Desired Temperature
• Self-Cleaning Device Fights Harmful Sediment Build-Up With A High-Velocity Spiraling Water Stream
• Temperature And Pressure Relief Valve Included
• 6-Year Limited Tank And Parts Warranty
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Dual 4500-Watt Heating Elements
• 0.93 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Low Lead Compliant
• MFG# PROE47 S2 RH95

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01 in. / 25mm thick
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4 in. FIP connectors
• Chrome plated brass supply nuts
• Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• For use with water only in accessible locations
• Conforms to ASME A112.18.6/CSAB125.6

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA Listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 12". Mfg #UR3088FX12

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a recessed tank flange

Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.

• Please refer to instructions for installation
• If you cannot install this product contact a qualified person
• Follow safety precautions
• 1 year limited warranty
• Metal construction
• Replacement burner
• Durable
• Long lasting
• Comes in a single
• Gray finish

The Rheem PROTECH FV Sensor Replacement Kit contains everything that you need to replace the FV Sensor Assembly on your Rheem water heater. This kit is required anytime the FV Sensor is tripped and needs to be replaced. Kit ensures safe and reliable operation.

• Direct replacement for Rheem, ruud and richmond water heaters
• Kit includes: FV sensor and wire tie
• Works on models: PROG40-40N RH67 PV, PROG40-36P RH67 PV, PROG40S-36N RH67 PV, PROG50-42N RH67 PV, PROG50-42P RH67 PV, PROG50S-36N RH67 PV, PROG50-40N RH67 PDV, PRO+G29-60N RH70 ID, PRO+G75-76P RH PV, PRO+G75-76N RH PV, PROG40-36U RH67 PV2, PROG50-38U RH67 PV2
• Genuine oem replacement kit
• 1-year limited warranty
• Packaged with installation instructions
• Easy to install
• Made from ceramic material
• Fix your water heater with peace of mind using genuine Rheem parts
• California residents see prop 65 warnings

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 15 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 15 in. length; Minimum Recommended Bend Radius: 2.5 in.
• For use with water only in accessible locations
• FIP connections
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

The SharkBite 18 in. x 3/4 in. Push-Fit x 3/4 in. FIP Corrugated Stainless Steel Water Heater Connector is the fastest way to connect your Water Heater to your plumbing system. Apply thread tape to the Pipe Nipple on the Water Heater thread the 3/4 in. FIP Swivel nut onto the Water Heater and tightens with wrench and connects the 3/4 in. SharkBite end to Copper, PEX, or CPVC pipe. No Solder or additional fittings are needed when using the SharkBite Connection system.

• Corrugated stainless steel
• Use to connect to any combination of copper, PEX, or CPVC pipes
• Innovative push-fit design makes for quick and easy installation
• Eliminates the need for additional transition fittings
• No solder or glue required to install
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Meets IAPMO, UPC, IPC and cUPC requirements
• Lead free
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• 3/4 in. PTC x 3/4 in. FIP x 18 in.
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

The 3/4 in. x 18 in. Tectite by Apollo Water Heater Connector was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. The stainless steel braided connectors are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel.

• Constructed of lead free dezincification resistant (DZR) brass and braided stainless steel for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation of water heaters to any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Meets UPC, IPC, and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 59
• Demount clip allows for valve removal (included)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi
• Maximum temperature of 250 degree F

The Camco 11460 22 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• 22 in. I.D.
• 24 in. O.D.
• For electric water heater only
• Side opening for drain fitting
• Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
• Durable polypropylene construction
• Will not rust, corrode or crack
• Black color
• Tools required for drain installation
• 1-year limited warranty

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

• 304 series stainless steel
• Extremely flexible
• Will not corrode or rust
• High temp EPDM washer chlorine and chloramine resistant
• Highest flow rate in the industry - no restrictions
• 100% leak tested
• Supply line type
• 1.25 in. width, .4 lbs. wide
• Under lifetime warranty
• Silver color

The Rheem PROTECH T-O-D Style Single-Pole Lower Thermostat is ideal for use in 2-element residential water heaters and can replace APCOM-style thermostats. These water heaters often have a "non-simultaneous" design, which means only one element is on at any given time. This thermostat has a temperature-sensitive bi-metal disc to deliver snap action to the contacts.

• Fits most brands: Rheem, Ruud, Richmond, GE, State, Kenmore, Bradford White, AO Smith, American, Craftmaster, Lochinvar, Reliance, GS Wood, Mor-Flo and Whirlpool
• Direct replacement for PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE30 S2 RH95 B, PROE36 S2 RH95, PROE38 S2 RH95 B
• For use in 2-element water heaters
• Replaces APCOM-style thermostats
• Temperature-sensitive bi-metal disc delivers snap action to the contacts
• Energy-efficient range setting from 90 degree F to 150 degree F
• Speed and force of contact separation provide a long-lasting, dependable performance at high electrical loads
• Durable metal and plastic construction
• Manual reset switch helps prevent overheating
• UL and CSA listed for safety
• 1 year limited warranty
• California residents see prop 65 warnings

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• MIP x FIP connections
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

The Thermwell Products Co. Inc. Fiberglass Water Heater Insulation Blanket fits up to a 60 Gal. tank. It is compatible with both gas and electric water heaters. This blanket helps you save energy by reducing your water heater's recovery time.

• For use with both gas and electric water heaters
• Fits up to a 60 Gal. tank
• Insulates a water heater
• Reduces water heater recovery time to save energy
• Durable fiberglass body with R-10 insulation
• East Installation
• saves money
• saves energy
• package includes a roll of plastic tape
• 3 in. thick

The Rheem Performance 50 Gal. Electric Water Heater takes up less space than competing models, making it the perfect for replacement of an existing water heater. Provides ample amount of hot water for households with 3-people. to 5-people. Plus, it includes a 1-year in-home labor warranty in addition to a 6-year tank and parts warranty. Enjoy peace-of-mind with a reliable hot water solution from Rheem.

• Washington and Oregon residents: your home is in a state that requires demand response water heaters, if this water heater does not meet demand response requirements, please select an approved demand response model available on homedepot.com.
• Reliable hot water: provides ample hot water for households with 3-people to 5-people or homes with 3 plus bathrooms
• Perfect for replacement: this water heater takes up less space than competitive models making it a great choice for replacing an existing water heater
• Peace-of-mind: backed by a 6-year tank and parts warranty plus a 1-year in-home labor warranty
• Reliable hot water solution from Rheem, the global leader in water heating
• Can't see the graphics above, visit us on a computer or tablet
• Delivers savings and efficiency: consider both initial cost and lifetime savings
• Enough hot water: choose a water heater that meets the highest demands of your household
• Now features a brass drain valve for added resiliency & durability

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 18 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

• 304 series stainless steel
• Extremely flexible
• Will not corrode or rust
• High temp EPDM washer chlorine and chloramine resistant
• Highest flow rate in the industry - no restrictions
• 100% leak tested