Built with heavy-duty butyl diaphragm system to absorb the expansion of water volume and help prevent dangerous pressure build-up. This Everbilt Expansion Tank will absorb pressure increases when properly installed on your closed water system. Most local codes now require an Expansion Tank on residential closed water systems. Water pressure over 80 psi can shorten the life of your water system and appliances.

• Stainless steel 3/4 in. MIP with hex
• Factory pre-charged at 40 psi
• cUPC certified/ NSF 61 compliant
• High quality coating prevents corrosion
• 16-Gauge cold rolled steel shell
• Brass air charging port with O-ring seal
• Maximum pressure of 150 psi
• Maximum temperature rating of 200 degree F
• Provides a reservoir for expanded water volume
• Protects water heater, fixtures and appliances

The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.

• Secures expansion tank to wall
• Galvanized and stainless steel construction
• Supports tanks up to 13 in. Dia
• Supports tanks up to 5 Gal.
• Includes mounting bracket, 2 support straps and mounting screws
• Quick-release stainless steel bands
• Fast and easy installation
• Takes load weight off pipes
• HOLDRITE quick strap brand
• Water heater accessories

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 3500-Watt
• Design type high watt density hair pin (2 passes)

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01 in. / 25mm thick
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4 in. FIP connectors
• Chrome plated brass supply nuts
• Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• For use with water only in accessible locations
• Conforms to ASME A112.18.6/CSAB125.6

The Rheem Professional Classic 50 Gal. Electric tall water heater provides an ample supply of hot water for households with 3 people to 5 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed top temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.

• 50 Gal. tank provides ample hot water for households with 3 people to 5 people
• Delivers 63 Gal. of hot water in the first hour
• Over-temperature protector cuts off power in excess temperature situations
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Uniform energy factor 0.93
• Requires a 240-Volt connection for installation
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
• 6-year limited warranty on tank and parts for your convenience
• With ProtectionPlus the 6-year limited tank warranty becomes 10-year

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

• 304 series stainless steel
• Extremely flexible
• Will not corrode or rust
• High temp EPDM washer chlorine and chloramine resistant
• Highest flow rate in the industry - no restrictions
• 100% leak tested
• Supply line type
• 1.25 in. width, .4 lbs. wide
• Under lifetime warranty
• Silver color

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2-passes)

The Rheem Professional Classic 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.

• 40 Gal. tank provides ample hot water for households with 2 people to 4 people
• Delivers 54 Gal. of hot water in the first hour
• Uniform energy factor 0.93
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Medium tank profile fits in a variety of indoor spaces
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
• 6-year limited warranty on tank and parts for your convenience
• With ProtectionPlus the 6-year limited tank warranty becomes 10-year

The Rheem Classic Atmospheric 40 Gal. Natural Gas Tall Water Heater comes with a 38,000 BTU/hour environmentally friendly low NOx burner that provides ample hot water for households with 2 to 4 people. The push button ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. The self-diagnostic gas control valve monitors system performance. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.

• Exclusive air/fuel shut-off device
• Maintenance free - no filter to clean
• Protective control system that disables the heater in the presence of flammable vapor accumulation
• Eco-friendly burner, low NOx design
• Premium grade anode rod provides long-lasting tank protection
• Enhanced flow brass drain valve
• Temperature and pressure relief valve included
• Easy to light - no matches required
• 6-year limited warranty on tank and parts for your convenience
• With ProtectionPlus the 6-year limited tank warranty becomes 10-year

Many of today's water systems require backflow prevention. This seals off the system and requires the use of an expansion tank, or the relief valve can discharge on every heating cycle. TW Series tanks eliminate wasting water and provide a smooth operating system and assure long trouble-free service.

• Stainless steel acceptance fitting
• Polypropylene liner eliminates internal corrosion
• 2-piece design
• 150 PSI rating
• Butyl rubber diaphragm
• Deep drawn steel
• 1-year limited warranty
• No wasted water
• 200 degree F max temperature
• External baked epoxy-polyester coating

This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 22 in. inside diameter
• 23 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Fitting included

The Rheem Classic Atmospheric 50 Gal. Natural Gas Tall Water Heater comes with a 38,000 BTU/hour environmentally friendly low NOx burner that provides ample hot water for households with 3 to 5 people. The push button ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. The self-diagnostic gas control valve monitors system performance. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.

• Exclusive air/fuel shut-off device
• Maintenance free - no filter to clean
• 6-year limited warranty on tank and parts for your convenience
• With ProtectionPlus the 6-year limited tank warranty becomes 10-year
• Protective control system that disables the heater in the presence of flammable vapor accumulation
• Eco-friendly burner, low NOx design
• Temperature and pressure relief valve included
• Easy to light - no matches required
• Premium grade anode rod provides long-lasting tank protection
• Enhanced flow brass drain valve

HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 18 in. length
• For use with water only in accessible locations
• FIP connections; Minimum recommended bend radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

Perfect for replacement of an existing water heater, the Rheem Professional Classic 50 Gal. Electric Water Heater takes up less space than competing models. Plus, a 6-year tank and parts warranty. Enjoy peace-of-mind with a reliable hot water solution from Rheem.

• Reliable hot water: provides ample hot water for households with 3-5 people or homes with 3+ bathrooms
• Perfect for replacement: this water heater takes up less space than competitive models making it a great choice for replacing an existing water heater
• Peace-of-mind: backed by a 6-year tank and parts warranty
• Reliable hot water solution from Rheem, the global leader in water heating
• Premium grade anode rod provides long-lasting tank protection
• Automatic thermostat keeps water at desired temperature
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• InfoCue - visible LED indicator
• Heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested

The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.

• Electric water heater is easy to maintain
• Delivers 45 Gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• Over-temperature protector cuts off power in excess temperature situations
• Short tank fits in tight applications
• 0.93 uniform energy factor signifies an energy efficient water heater
• Meets or exceeds NAECA requirements
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Material type constructed of rubber material
• Design type high watt density fold back (2 passes)

The Rheem Professional Classic 40 Gal. Electric tall water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.

• 40 Gal. tank provides ample hot water for households with 2 people to 4 people
• Electric water heater is easy to maintain
• Delivers 55 Gal. of hot water in the first hour
• Requires a 240-Volt connection for installation
• 0.93 uniform energy factor signifies an energy efficient water heater
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
• 6-years limited warranty on tank and parts for your convenience
• With ProtectionPlus the 6-years limited tank warranty becomes 10-years

The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.

• Made from durable polypropylene plastic
• Will not corrode or crack
• 26 in. ID
• 28 in. OD
• 1-1.5 in. PVC fitting included
• Pre-cut side outlet
• Recyclable
• Non-toxic
• Black finish
• Use with electric water heaters only

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

The Rheem Pro-Classic Atmospheric 40 gal. Natural Gas Short Water Heater comes with a 38,000 BTU/hour environmentally friendly low NOx burner that provides ample hot water for households with 2-4 people. The push button ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. The self-diagnostic gas control valve monitors system performance. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.

• Exclusive air/fuel shut-off device
• Maintenance free - no filter to clean
• Protective control system that disables the heater in the presence of flammable vapor accumulation
• Eco-friendly burner, low NOx design
• Premium grade anode rod provides long-lasting tank protection
• Easy to light - no matches required
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• 6-year limited tank and parts warranty
• With ProtectionPlus the 6-year limited tank warranty becomes 10-year

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

• Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
• Easy to install
• Durable braided stainless steel build
• Highly flexible to resist kinks and creases in tight spaces
• Heavy duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
• 24 in. L
• Lead free and meeting all code requirements
• 5-year warranty

SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248

• Can Be Installed On Wet Lines And Pressure Tested Immediately.
• Stainless steel retainer adds strength and durability.
• High-performance DZR lead-free brass body.
• No special tools, crimping, soldering or glue required.

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

The Camco 11460 22 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• 22 in. I.D.
• 24 in. O.D.
• For electric water heater only
• Side opening for drain fitting
• Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
• Durable polypropylene construction
• Will not rust, corrode or crack
• Black color
• Tools required for drain installation
• 1-year limited warranty

Cleans heater coils thoroughly. Restores pressure and circulation in minutes, with no strong odor. Calci-Free is a unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients. It is easy to use and works twice as fast as other cleaners. Use it for routine cleaning to remove calcium and other solid deposits from heating coils.

• Calci-Free tankless water heater flush cleans heater coils thoroughly, restores pressure and circulation in minutes, with no strong odor, Calci-Free is a unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients, it is easy to use and works twice as fast as other cleaners
• More effective than vinegar
• Easy to use no strong odor
• Cleans heat exchanger fast

Protection Plus is a 4-year warranty extension kit to be used for new Rheem water heater installations. This item is sold in package quantity of 1 and provides a label to be placed on the water heater. With just 2 water heaters, you have the option of selling 4 warranty periods which will effectively have 4 water heaters in little more space than 2.

• 6-year limited tank warranty becomes 10-year
• 8-year limited tank warranty becomes 12-year
• Provides up to 135% additional anodic protection
• For use on all Rheem residential models except manufactured housing, marathon, point-of-use, hybrid electric, table top, condensing gas models, tankless or thermal expansion tanks
• Great up-sale opportunity
• High quality magnesium anode rod with plastic lined nipple (hot side)
• Plastic lined nipple (cold side)
• Brass 3/4 in. to 1 in. adaptor
• Warranty certificate with instructions
• Protection Plus label to be placed on water heater

This Camco 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 26 in. inside diameter
• 27 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

Rheem Professional Classic 28 Gal. Short 240 V 4500-Watt Electric Water Heater. Electric Water Heater Is Easy To Maintain. Short tank fits in tight applications. Delivers 45 Gal. of hot water in the first hour. Over-temperature protector cuts off power in excess temperature situations. Dual 4500-Watt heating elements. Heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. Automatic thermostat keeps water at your desired temperature. Requires a 240-Volt connection for installation. 0.92 uniform energy factor signifies an energy efficient water heater. 6-year limited warranty on tank and parts for your convenience. With Protection Plus the 6-Year Limited Tank Warranty Becomes 10-Year. Premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve. Mfg #PROE28 S2 RH95 B (4500W)

• Electric Water Heater Is Easy To Maintain
• Short tank fits in tight applications
• Delivers 45 Gal. of hot water in the first hour
• Over-temperature protector cuts off power in excess temperature situations
• Electric juntion box located above heating elements for easy installation
• Over-temperature protector cuts off power in excess temperature situations
• Automatic thernostat keeps water at desired temperature
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• With ProtectionPlus the 6-Year limited tank warranty becomes 10-Year

This drain pan is to be used under gas or electric water heaters to prevent damage to floors or other finished surfaces in the event of a water heater leak. It is made from aluminum which is recyclable and will not corrode. CPVC drain fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 24 in. I.D.; 25 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver metallic finish
• For use with tank water heaters
• Helps protect your floors from damage due to water heater leaks

The Camco Polypropylene Side-Mount Runoff Tube is designed for use with a side-mounted relief valve. The tube safely carries away steam and scalding hot water in the event of accidental valve activation. Made from thermoplastic polypropylene. Tube can be cut to desired length needed.

• Attaches to the discharge outlet of a temperature- and pressure-relief valve to safely carry away steam and hot water in the event of accidental valve activation
• Can be directed to the water heater pan if the pan is plumbed to a drain or other disposal area
• Guards against accidental flooding and expensive repair
• Made of polypropylene with a zinc-plated steel fitting
• Rigid surface is ideal for gripping with standard wrenches
• Easy to install with the included gasket
• Do not connect runoff directly to a discharge drain unless an air gap is provided
• Side mount
• Can be cut to desired length
• 58 in. long

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 3500-Watt
• Design type low watt density fold back (4 passes)

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 3500-Watt
• Design type low watt density fold back (4 passes)

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

The 3/4" DUXLC Dielectric Union is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the 3/4" DUXLC include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The 3/4" DUXLC comes standard with a female iron pipe x female copper sweat joint.

• Multiple size options for versatile installation
• Couples dissimilar piping materials for ultimate convenience and low installation costs
• High protection from piping deterioration
• Female iron pipe x female copper sweat connection comes standard
• Certified to NSF/ANSI 372 by IAPMO R&T
• Easy To Install
• Dielectric Union
• Commonly used on residential water heaters
• installed on potable water lines
• 175 maximum pressure

To be used for inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 3/4 in. NPT x 3/4 in. NPT x 2.5 in. L. Can be used with electric or gas water heaters.

• For inlet and outlet hookups where dissimilar metals occur in piping and plumbing systems
• 2.5 in. L
• 3/4 in NPT x 3/4 in. NPT
• Plastic lining prevents corrosion
• Galvanized metal
• 2/card
• Use for water heater inlet and outlet connections
• Dielectric
• Silver
• Pair

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 1500-Watt
• Storage tank type the storage tank is required to have a recessed tank flange

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient temperature range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• High limit control
• Temperature can be set from 90 degree to 150 degree
• Built-in safety switch to prevent overheating
• Wiring diagram included
• For electric water heaters
• Upper thermostat

The Camco 11360 24 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• For electric water heaters only
• 24 in. ID ; 26 in. OD
• Recyclable
• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipe
• 2.5 in. H
• Pans are injection molded for superior strength and durability

The NCLX-5LX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. Test lever standard. Temperature relief setting is 210 degree F (99 degree C).

• Provides effective isolation from mineral deposits and galvanic corrosion
• Completely automatic and reseats after temperature or pressure relief
• Every valve is tested for performance prior to shipping
• Listed by CSA and ASME
• Factory set at 150 psi
• Maximum temperature of 210 degree F
• Male inlet
• Female outlet
• Cast bronze body
• Brass and stainless steel internal parts

This potable water expansion tank is used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T and P relief valve setting. This field-adjustable steel tank is air pre-charged at 20 psi, volume 2.1 Gal. designed with an FDA-approved polypropylene liner and Butyl rubber diaphragm, copper-lined steel and 3/4 in. male inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAPMO listed and ANSI/NSF 61 certified. The maximum pressure is 150 psi (10 BAR).

• Prevents over-pressure caused by thermal expansion
• Air pre-charge at 20 psi
• 3/4 in. male connection
• Butyl rubber diaphragm
• 2.1 Gal. volume
• Absorbs the increased volume of water created by thermal expansion
• Prevents air to water contact
• Helps ensure long system life
• 150 psi max pressure
• Maintains balanced pressure

The Homewerks Dielectric Union prevents electrolysis or galvanic action when connecting dissimilar materials. Pressure rated at 150 psi at 180 degree F. Complies with 0.25% weighted average lead content on wet surfaces.

• 3/4 in. dielectric union
• Prevents electrolysis or galvanic action when connecting stainless steel and copper pipe
• Pressure rated at 150 psi at 180 degree F
• Complies with 0.25% weighted average lead content on wet
• Compatible with copper and steel
• Components of this union are not interchangeable with other manufacturer's unions
• FIP x SWT

The Rheem PROTECH SP8346 T and P (Temperature and Pressure Relief) Valve is designed to protect water heaters from overheating and over-pressurization. It is a component that is integral to the safe operation of the water heater. The valve features a bronze body with 3/4 in. NPT male inlet and 3/4 in. NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Temperature Relief: 210 degree F (99 degree C), Pressure Relief Range: 75 to 150 psi (5.2 to 10.3 bar).

• Direct replacement for Rheem, Ruud and Richmond water heaters
• Fits most brands including American, AO Smith, Bradford White, Craftmaster, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Sears, State and Whirlpool water heaters
• ASME rated and CSA listed
• Features a unique thermostat with special thermo-bonded coating
• Thermostat is accurate and proven
• Stainless steel spring
• Body length of 4.25 in.
• 3 in. thermostat element
• 1 year limited warranty
• Genuine OEM replacement part

This 5 in. element wrench fits all standard screw-in elements and 1-1.5 in. nuts. Used to remove an element from an electric water heater. Works with a screwdriver. Goes into offsets where an adjustable wrench cannot.

• Zinc-plated metal
• 5 in. L
• Fits standard screw-in elements
• Easy to use
• USE with screwdriver
• Fits 1-1.5 in. nuts
• Fits into offsets that are not accessible with an adjustable wrench
• Element removal tool
• Great for DIY
• Lightweight