The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.

• Secures expansion tank to wall
• Galvanized and stainless steel construction
• Supports tanks up to 13 in. Dia
• Supports tanks up to 5 Gal.
• Includes mounting bracket, 2 support straps and mounting screws
• Quick-release stainless steel bands
• Fast and easy installation
• Takes load weight off pipes
• HOLDRITE quick strap brand
• Water heater accessories

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

• The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
• Rheem Professional 38 Gal. 240-Volt 4500-Watt Short Residential Electric Water Heater
• Delivers 51 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Short Tank Fits In Tight Applications
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• With ProtectionPlusâ„¢ the 6-year limited tank warranty becomes 10-year
• MFG# PROE38 S2 RH95 B (4500W/240V)

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

The Thermwell Products Co. Inc. Fiberglass Water Heater Insulation Blanket fits up to a 60 Gal. tank. It is compatible with both gas and electric water heaters. This blanket helps you save energy by reducing your water heater's recovery time.

• For use with both gas and electric water heaters
• Fits up to a 60 Gal. tank
• Insulates a water heater
• Reduces water heater recovery time to save energy
• Durable fiberglass body with R-10 insulation
• East Installation
• saves money
• saves energy
• package includes a roll of plastic tape
• 3 in. thick

This is a Gas Water Heater Installation Kit by HOME-FLEX. It contains 2-flexible water connectors and one flexible gas appliance connector. This kit makes it easier to install your water heater.

• Kit contains two 3/4 in. FIP x 3/4 in. FIP x 18 in. long corrugated stainless steel water connectors that can be used for both hot and or cold water connections
• Includes 2-compression adapters for making connections to 3/4 in. copper water pipes
• Includes 1-yellow coated gas appliance connector (1/2 in O.D., 3/8 in I.D. x 24 in. long) includes pipe thread adapter fittings. (one for 1/2 in. male and one for 1/2 in. female)
• White thread sealing tape included
• Bright stainless steel finish on water connectors
• Rated for 104,200 CFH flow rating
• Easy to use
• Durable construction
• Full kit
• Uniform Energy Factor (UEF) 0.59

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

• Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
• Easy to install
• Durable braided stainless steel build
• Highly flexible to resist kinks and creases in tight spaces
• Heavy duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
• 24 in. L
• Lead free and meeting all code requirements
• 5-year warranty

• The Rheem Professional Classic 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional 40 Gal. Medium Electric Water Heater
• 40 Gal. Tank Provides Ample Hot Water For Households With 2 People To 4 People
• Delivers 55 Gal. Of Hot Water In The First Hour
• Uniform Energy Factor 0.93
• Dual 4500 Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240 Volt Connection For Installation
• Medium Tank Profile Fits In A Variety Of Indoor Spaces
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Electric Junction Box Located Above Heating Elements For Easy Installation
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE40 M2 RH95 (4500W)

The Rheem Performance 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6 year limited tank and parts warranty plus a 1-year in home labor warranty.

• Washington and Oregon residents: your home is in a state that requires demand response water heaters, if this water heater does not meet demand response requirements, please select an approved demand response model available on homedepot.com.
• 40 Gal. tank provides ample hot water for households with 2-people to 4-people
• Electric water heater is easy to maintain
• Delivers 53 Gal. of hot water in the first hour
• 6 year limited warranty on tank and parts for your convenience
• 1 year in home labor warranty for peace of mind
• Automatic thermostat keeps water at your desired temperature
• Dual 4500-Watt heating elements
• Designed for easy replacement of your existing water heater
• Requires a 240-Volt connection for installation
• Medium tank profile fits in a variety of indoor spaces
• Uniform energy factor 0.93
• Now features a brass drain valve for added resiliency & durability
• Meets 2015 NAECA Standards

Use this plastic drain pan under your electric water heater to help prevent damage to finished surfaces in the event of a leak from your water heater. It is constructed of durable, flexible polypropylene that will not corrode or crack while installing the water heater. It has a pre-cut drain hole and the PVC fitting is included. It should be plumbed to the outside of the structure, away from finished surfaces, if the water heater is installed inside of the structure or elsewhere where a leak from the unit could cause damage to finished surfaces.

• Made for use under an electric water heater
• Injection-molded polypropylene plastic
• Recyclable
• Black
• PVC drain fitting included
• 28 in. I.D.
• 30 in. O.D.
• Pre-cut drain hole
• Non-toxic
• Recommended that pan has an inside diameter 2 in. - 4 in. larger than the diameter of your water heater tank

• The Rheem Classic Atmospheric 40 Gal. Natural Gas Tall Water Heater comes with a 38000 BTU/hour environmentally friendly low NOx burner that provides ample hot water for households with 2 to 4 people. The push button ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. The self-diagnostic gas control valve monitors system performance. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.
• Rheem 40 Gal. 38K BTU Natural Gas Water Heater
• California Residents: Water Heater Does Not Meet Ultra-Low Nox (Uln) Emissions Requirements; Regulations Prohibit The Sale, Shipment Or Installation Of This Water Heater In Any Air Quality District That Requires Uln Water Heaters
• Maintenance Free - No Filter To Clean
• Protective Control System That Disables The Heater In The Presence Of Flammable Vapor Accumulation
• Eco-Friendly Burner, Low Nox Design
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Enhanced Flow Brass Drain Valve
• Temperature And Pressure Relief Valve Included
• Easy To Light - No Matches Required
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Exclusive Air/Fuel Shut-Off Device
• Uniform Energy Factor (Uef) 0.58
• Low Lead Compliant
• More Hot Water At A Low Operating Cost
• MFG# PROG40-38N RH62

The Rheem Performance 50 Gal. Electric Water Heater takes up less space than competing models, making it the perfect for replacement of an existing water heater. Provides ample amount of hot water for households with 3-people. to 5-people. Plus, it includes a 1-year in-home labor warranty in addition to a 6-year tank and parts warranty. Enjoy peace-of-mind with a reliable hot water solution from Rheem.

• Washington and Oregon residents: your home is in a state that requires demand response water heaters, if this water heater does not meet demand response requirements, please select an approved demand response model available on homedepot.com.
• Reliable hot water: provides ample hot water for households with 3-people to 5-people or homes with 3 plus bathrooms
• Perfect for replacement: this water heater takes up less space than competitive models making it a great choice for replacing an existing water heater
• Peace-of-mind: backed by a 6-year tank and parts warranty plus a 1-year in-home labor warranty
• Reliable hot water solution from Rheem, the global leader in water heating
• Can't see the graphics above, visit us on a computer or tablet
• Delivers savings and efficiency: consider both initial cost and lifetime savings
• Enough hot water: choose a water heater that meets the highest demands of your household
• Now features a brass drain valve for added resiliency & durability

The Rheem Performance 40 Gal. Electric tall water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty plus a 1-year in home labor warranty.

• Washington and Oregon residents: your home is in a state that requires demand response water heaters, if this water heater does not meet demand response requirements, please select an approved demand response model available on homedepot.com.
• 40 Gal. tank provides ample hot water for households with 2-people to 4-people
• Electric water heater is easy to maintain
• Delivers 54 Gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• 1-year in home labor warranty for peace of mind
• 0.93 uniform energy factor signifies an energy efficient water heater
• Automatic thermostat keeps water at your desired temperature
• Dual 4500-Watt heating elements
• Requires a 240-Volt connection for installation
• Medium tank fits in a variety of indoor applications
• Designed for easy replacement of your existing water heater
• Now features a brass drain valve for added resiliency & durability
• Premium grade anode rod provides long lasting tank protection
• Meets 2015 NAECA Standards

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

The SharkBite 18 in. x 3/4 in. Push-Fit x 3/4 in. FIP Corrugated Stainless Steel Water Heater Connector is the fastest way to connect your Water Heater to your plumbing system. Apply thread tape to the Pipe Nipple on the Water Heater thread the 3/4 in. FIP Swivel nut onto the Water Heater and tightens with wrench and connects the 3/4 in. SharkBite end to Copper, PEX, or CPVC pipe. No Solder or additional fittings are needed when using the SharkBite Connection system.

• Corrugated stainless steel
• Use to connect to any combination of copper, PEX, or CPVC pipes
• Innovative push-fit design makes for quick and easy installation
• Eliminates the need for additional transition fittings
• No solder or glue required to install
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Meets IAPMO, UPC, IPC and cUPC requirements
• Lead free
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• 3/4 in. PTC x 3/4 in. FIP x 18 in.
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

• 304 series stainless steel
• Extremely flexible
• Will not corrode or rust
• High temp EPDM washer chlorine and chloramine resistant
• Highest flow rate in the industry - no restrictions
• 100% leak tested
• Supply line type
• 1.25 in. width, .4 lbs. wide
• Under lifetime warranty
• Silver color

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a recessed tank flange

The Rheem PROTECH FV Sensor Replacement Kit contains everything that you need to replace the FV Sensor Assembly on your Rheem water heater. This kit is required anytime the FV Sensor is tripped and needs to be replaced. Kit ensures safe and reliable operation.

• Direct replacement for Rheem, ruud and richmond water heaters
• Kit includes: FV sensor and wire tie
• Works on models: PROG40-40N RH67 PV, PROG40-36P RH67 PV, PROG40S-36N RH67 PV, PROG50-42N RH67 PV, PROG50-42P RH67 PV, PROG50S-36N RH67 PV, PROG50-40N RH67 PDV, PRO+G29-60N RH70 ID, PRO+G75-76P RH PV, PRO+G75-76N RH PV, PROG40-36U RH67 PV2, PROG50-38U RH67 PV2
• Genuine oem replacement kit
• 1-year limited warranty
• Packaged with installation instructions
• Easy to install
• Made from ceramic material
• Fix your water heater with peace of mind using genuine Rheem parts
• California residents see prop 65 warnings

The Rheem Performance 40 Gal. Natural Gas Tall Water Heater comes with a 36,000 BTU/hour environmentally friendly low NOx burner that provides ample hot water for households with 2-people to 4-people. The push button ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.

• California and Utah residents (Utah effective 7/1/18): this water heater does not meet ultra-low NOx (ULN) emissions requirements; regulations prohibit the sale, shipment or installation of this water heater in any air quality district that requires ULN water heaters; please refer to the maps below to confirm if your home is in a district that requires ULN emission water heaters and if so please select an approved ULN model
• Natural gas water heater costs less to operate than electric models
• Delivers 68 Gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• 1-year in home labor warranty for peace of mind
• Push button ignition system simplifies the startup process
• Now features a brass drain valve for added resiliency and durability
• Rated for installations up to 8,400 ft.
• Narrow tank profile fits in a variety of indoor spaces
• 0.58 uniform energy factor indicates an energy efficient water heater
• Designed for easy replacement of your existing water heater
• Meets 2015 NAECA standards
• Meets 2015 NAECA standards

Protection Plus is a 4-year warranty extension kit to be used for new Rheem water heater installations. This item is sold in package quantity of 1 and provides a label to be placed on the water heater. With just 2 water heaters, you have the option of selling 4 warranty periods which will effectively have 4 water heaters in little more space than 2.

• 6-year limited tank warranty becomes 10-year
• 8-year limited tank warranty becomes 12-year
• Provides up to 135% additional anodic protection
• For use on all Rheem residential models except manufactured housing, marathon, point-of-use, hybrid electric, table top, condensing gas models, tankless or thermal expansion tanks
• Great up-sale opportunity
• High quality magnesium anode rod with plastic lined nipple (hot side)
• Plastic lined nipple (cold side)
• Brass 3/4 in. to 1 in. adaptor
• Warranty certificate with instructions
• Protection Plus label to be placed on water heater

Keep your hot water heater safely elevated off the ground with the Water-Tite Water Heater Stand. Designed to sit 18 inches off the floor, this durable metal stand helps safeguard gas water heaters with an ignition source from potentially hazardous and flammable materials that may spill inside of garages. It also keeps the water heater safe from flooding and other potentially damaging situations, helping to prolong its lifespan. Choose from a model that measures 21 inches long by 21 inches wide and supports up to 650 pounds or a model that measures 24 inches long by 24 inches wide and supports 1,300 pounds. Each gas heater stand is made of durable 18-gauge galvanized steel and assembles easily (screws and nuts included).

• Galvanized-steel stand for gas water heaters
• Keeps 30- to 50-gallon capacity heaters safely elevated 18 inches off the ground
• Made of rigid 18-gauge steel
• Simple assembly with included screws and nuts
• Available in 650- and 1,300-pound-capacity models
• Designed for heavy duty use
• Stable
• Strong
• Easy assembly
• Steel

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a screw plug spud receptacle

The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.

• Made from durable polypropylene plastic
• Will not corrode or crack
• 26 in. ID
• 28 in. OD
• 1-1.5 in. PVC fitting included
• Pre-cut side outlet
• Recyclable
• Non-toxic
• Black finish
• Use with electric water heaters only

The Camco 22 in. I.D. plastic water heater pan is made for use under electric water heaters to help protect your floors from leaks or runoff from T and P valve activation. It is made from durable polypropylene plastic and comes with a 1-1/2 in. PVC drain fitting. A drain opening is set in the side to allow you to direct any water to the outside or to the nearest drain.

• Made from durable polypropylene plastic
• 20 in. inside diameter
• 22 in. outside diameter
• Will not rust, corrode, or crack
• Recyclable
• Non-toxic
• Pre-cut side outlet
• Includes PVC drain fitting
• Black finish

Water Heater Pan With Fittings. Plastic. 24" Id X 26" Od. Mfg #HP624

• Plastic
• 24" Id X 26" Od
• Package Quantity 1
• Product height - 2.750 in.

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters that use just a single element and thermostat. It has adjustable temperature settings, pre-set at 120 by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Not for use with water heaters that have both upper and lower thermostats/elements

The Rheem PROTECH T-O-D Style Upper-Element Thermostat is the most popular upper thermostat used in residential electric water heaters. These water heaters often have a "non-simultaneous" design, which means that only 1 heating element is on at any given time. This type of thermostat is for use in 2-element water heaters.

• Fits most brands: rheem, ruud, richmond, ge, state, kenmore, bradford white, ao smith, American, craft master, lochinvar, reliance, gs wood, mor-flo and whirlpool
• Direct replacement for PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE30 S2 RH95 B, PROE36 S2 RH95, PROE38 S2 RH95 B
• For use in 2-element water heaters
• Replaces APCOM-style thermostats
• Temperature-sensitive bi-metal disc delivers snap action to the contacts
• Energy-efficient range setting from 90° F to 150° F
• Speed and force of contact separation provide a long-lasting, dependable performance at high electrical loads
• Durable metal and plastic construction
• Manual reset switch helps prevent overheating
• UL and CSA Listed for safety
• 1-year limited warranty
• California residents see prop 65 warnings

SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248

• Can Be Installed On Wet Lines And Pressure Tested Immediately.
• Stainless steel retainer adds strength and durability.
• High-performance DZR lead-free brass body.
• No special tools, crimping, soldering or glue required.

The 3/4 in. x 18 in. Tectite by Apollo Corrugated Stainless Steel Water Heater Connector was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. Using Tectite by Apollo Corrugated Stainless Steel Water Heater Connectors is the fastest, cleanest, and simplest way to install a water heater.

• No-kink corrugated stainless steel construction guarantees maximum flow rate even in tight radius bends
• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 68
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for connector removal (sold separately)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Rheem Performance 75 Gal. Natural Gas Tall Power Vent Water Heater comes with a 75,100 BTU/hour environmentally friendly Low NOx burner that provides ample hot water for households with 5 or more people. The electronic ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. The self-diagnostic gas control valve monitors system performance. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 1 in. water connections are included with the water heater for easy installation.

• California and utah residents ( utah effective 7/1/18): this water heater does not meet ultra low NOx (ULN) emissions requirements regulations prohibit the sale, shipment or installation of this water heater in any air quality district that requires ULN water heaters. please refer to the maps below to confirm if your home is in a district that requires ULN emission water heaters, and if so please select an approved ULN model
• Requires standard 110-Volt electrical outlet (3-prong grounded) for installation
• 75 Gal. tank provides ample hot water for households with 5 or more people
• Delivers 110 Gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• 1-year in home labor warranty for peace of mind
• Maintenance free - no filter to clean or replace
• Electronic ignition system simplifies the startup process
• Self-diagnostic gas valve monitors system performance
• Can be vented vertically or horizontally up to 100 ft. to suit any application
• Vents with PVC, CPVC or ABS
• Rated for installations up to 8,500 ft.
• Now features a brass drain valve for added resiliency & durability
• Designed for easy replacement of your existing water heater
• Meets 2015 NAECA standards

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 12". Mfg #UR3088FX12

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

The 3/4 in. x 18 in. Tectite by Apollo Water Heater Connector with Factory Integrated Ball Valve was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. The Integrated Ball Valve on the Tectite by Apollo Water Heater Connector provides a quarter-turn, single handle shut-off. The braided stainless steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. Tectite by Apollo Water Heater Connectors dramatically reduce water heater installation times.

• Constructed of lead free dezincification resistant (DZR) brass and braided stainless steel for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation of water heaters to any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC, and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 58
• Demount clip allows for valve removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Fluidmaster B1H18 18 in. Water Heater Connector is a top choice when replacing your water heater supply line. Installation is fast and easy, with easy grip brass hex nuts, and exceptional flexibility that resists kinks or creases in the tightest spaces. This replacement water heater connector fits 3/4 in. F.I.P. x 3/4 in. F.I.P. connections. Designed with quality in mind this water heater connector showcases a 5 year warranty, durable braided stainless steel materials, and nickel plated heavy duty brass hex nuts. Replace old, creased, or problem water heater connectors with a quality you can trust. Lead free and meeting all code requirements. Upgrade your water heater supply line now, to a Fluidmaster Connector.

• Highly flexible water heater connector that resists kinks and creases
• Easy to install, the heavy-duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P
• 18 in. L
• Lead free, and meeting all code requirements
• Quickly replace risky faulty and old connector models
• 5 year warranty
• Featuring a durable build from braided stainless steel
• Highly flexible to resist kinks and creases in tight spaces
• Repair parts that are made to last

This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 22 in. inside diameter
• 23 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Fitting included

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA Listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

The Tough Water Heater pan is the toughest water heater drain pan you can buy. The Pro Series Pan is approved for use with either Electric or Gas Water Heaters. It's made from SecureFLX, which is the safest, strongest and most innovative polymer on the market. This pan line is extremely tough, extremely flexible, and is approved by the ICC to be in compliance with the IPC, UPC, IRC and NSPC.

• Approved for use with either gas or electric water heaters
• Virtually indestructible, flexible, self-extinguishing
• ICC-ES approved compliance with the IPC, UPC IRC, and NSPC
• Easy no lift tank installs
• Available in multiple sizes: 21 in., 23 in., 25 in., 27 in., 31 in.
• Made from SecureFLX, which is the safest, strongest and most innovative polymer on the market
• Extremely tough
• Extremely flexible
• Includes custom fitting
• Ideal for all applications

• The Rheem Professional Classic 36 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Elec 36 Gal Short
• Electric Water Heater Is Easy To Maintain
• Short Tank Fits In Tight Applications
• Delivers 46 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Includes Temperature And Pressure Relief Valve
• Premium Grade Anode Rod Provides Long-Lasting Protection
• Provides Ample Supply Of Hot Water For Households Of 2 To 4 People
• MFG# PROE36 S2 RH95 (CP)

• Eemax Electric Mini Tanks offer 99 thermal energy efficiencies that pays for itself. Eemax's mini tanks minimize stand-by heat loss - don't pay for keeping water hot in a large storage tank 24/7 Saving energy also means you are reducing your carbon footprint. Enjoy up to 90 space saving compared to large tank water heaters. This means you can put your Eemax heater anywhere. With Eemax Mini Tanks dangerous temperature levels and spikes are no longer a problem. Mini Tanks run on safe electricity no venting required or carbon monoxide danger. You can expect decades of trouble free performance from your Eemax Mini Tanks and can last nearly twice as long as a tank heater.
• Eemax 2.5 Gal Electric Mini Tank Water Heater
• Point Of Use Heating Eliminates Long Hot Water Pipe Runs
• Compact Design-Fits Virtually Anywhere
• Can Be Installed On Hot Or Cold Water Feed
• Adjustable Temperature Control 50-140
• T And P Valve Included
• Single Weld Glass Lined Tank For Extended Life
• Floor Mount Or Wall Hung Bracket Included
• Status Indicator Light
• 120-Volt Cord Provided
• Etl Listed To Ul174 And Nsf 373
• Microprocessor Thermostatic Control + / - 1 Degree F
• Tested By Independent Laboratory To Maintain Water Purity
• MFG# EMT2.5

The 3/4 in. x 18 in. Tectite by Apollo Water Heater Connector was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. The stainless steel braided connectors are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel.

• Constructed of lead free dezincification resistant (DZR) brass and braided stainless steel for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation of water heaters to any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Meets UPC, IPC, and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 59
• Demount clip allows for valve removal (included)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi
• Maximum temperature of 250 degree F

This 5 in. element wrench fits all standard screw-in elements and 1-1.5 in. nuts. Used to remove an element from an electric water heater. Works with a screwdriver. Goes into offsets where an adjustable wrench cannot.

• Zinc-plated metal
• 5 in. L
• Fits standard screw-in elements
• Easy to use
• USE with screwdriver
• Fits 1-1.5 in. nuts
• Fits into offsets that are not accessible with an adjustable wrench
• Element removal tool
• Great for DIY
• Lightweight

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

This 3/4 inch extra extended shank temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. It is suitable for water heaters with up to 2 1/2 inches (63.5 mm) of insulation. It is ASME rated and CSA listed. The temperature relief is 210 F (99 C), the pressure relief range is 75 to 150 psi (5.2 to 10.3 bars) and the standard pressure setting is 150 psi (10.55 bar).

• Self closing safety valve for hot water heaters
• Unique thermostat with special thermo-bonded coating
• Brass body construction
• Temperature relief is 210 degree F (99 degree C)
• Pressure relief range is 75 to 150 psi
• ASME rated, CSA Listed
• Extended inlet shank; suitable for water heaters with up to 2 1/2 inch insulation
• Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
• ANSI Z21.22 certified
• Automatic reseating