SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in. pipe insertion depth = 15/16 in.

The Homewerks 1/2" NOM Comp x 3/8" OD Comp Multi-Turn Angle Shut Off Valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve from Homewerks.

• 1/2 in. nominal compression x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with copper
• Chrome plated finish
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• Limited lifetime warranty
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free certified

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• IAPMO ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 Annex G
• Manufactured in an ISO accredited facility

Perfect for residential or commercial use on water, air, steam, oil or gas. The Everbilt Lead Free Ball Valve is designed to fit for a variety of applications. It works as a water shut off valve and is constructed of heavy-duty, corrosion-resistant forged brass and features a lever handle and copper sweat connections on either end. The full port design provides maximum flow and minimum pressure drops.

• Extremely low return rate
• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• During installation, only apply heat to valve while in the open position
• Can be soldered onto Type K, L or M rigid copper pipe
• Suitable for non-shock operating pressures up to 600 psi
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position

BrassCraft 1/2 in. Nom CPVC x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, one-piece body construction for strength, durability and long-lasting performance
• Compatible with CPVC tubing
• For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 degree F. For those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA Listed to ASME A112.18.1 / CSA B125.1

With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. 100% leak tested to ensure reliable, leak-free performance. 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Angle Ball Stop.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Precision-machined brass ball to provide smoother operation without freeze ups even after long periods of non-use
• Blow-out proof, plated stem is assembled from the inside with double O-rings to help ensure safe, reliable performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• 100% leak tested to ensure reliable, leak-free performance
• Temperature rating: 40 to 180 degree F
• Pressure rating: 125 psi maximum
• IAPMO ASME A112.18.1/CSA B125.1

Sharkbite 1/2" Pushtoconnect Coupling. Mfg #UR008

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

Sharkbite Max Ball Valve 3/4" Model UR22185. Mfg #UR22185

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability
• Can Be Installed On Wet Lines
• Sharkbite Max Ball Valve 3/4"

The Homewerks 1/2 in. FIP x 3/8 in. O.D. compression multi-turn angle shut-off valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn the water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve.

• 1/2 in. FIP x 3/8 in. O.D. compression
• Multi-turn handle enables rapid and safe flow control in cold water pipes
• Compatible with iron pipe
• Chrome finish
• Limited lifetime warranty
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• NSF/cUPC/ANSI 61 certified

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 82
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x compression connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

The Homewerks Worldwide Lead Free Press Ball Valve is constructed of heavy forged brass and has a lever handle with press connections on both ends. Designed for residential and commercial use in no-lead potable water installations, this valve complies with all lead-free plumbing laws. This valve is installed with commercially available VUS profile crimp tools (available for purchase or rental). The double O-ring press crimp connections have pressure ratings that far exceed comparable push to connect valves. This valve also has excellent corrosion resistance and is fit for many potable water applications.

• Lead-free construction is suitable for all no-lead potable water applications, in full compliance with all lead-free plumbing standards
• Full port, quarter turn design provides a reliable shut off without slowing flow through the pipe
• Designed for installation onto type K, L or M rigid copper pipe
• Both steel handle and nut covered with an anti-corrosion treatment
• Compatible with commercially-available VUS profile crimp tools
• Double O-Ring press connection create a reliable seal that will work under higher pressures than push to connect or PEX systems
• Crimp tool installation means less materials used during install - no solder, crimp rings or solvents required

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

Designed for residential/commercial air, steam, oil or gas applications, this 3/4 in. Lead Free Brass Sweat x Sweat Ball Valve includes a full port for maximum flow and minimum pressure drops. Each valve has a full forged brass body that provides excellent corrosion resistance. Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position.

• Extremely low return rate
• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
• Made in Italy

The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Straight Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x compression connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

BrassCraft 1/4" Turn Straight Valve 1/2" Press Connect Inlet x 3/8" OD Outlet

• One-Piece Brass Body For Strength And Durability
• Compatible with copper pipe (ASTM B88 tubing)
• Safe installation without the need for heat or flame
• 1/4 handle provides easy on/off flow control with a 90 degree turn of the handle
• Chrome plated brass ball provides corrosion resistance and smooth operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Connection capability on both wet and dry systems
• Chrome plated finish
• Temperature rating: 40degree to 160degree F
• Pressure rating: 125 psi maximum
• Product certified by IAPMO to ASME ASME A112.18.1/CSA B125.1
• Mfg #G2CP19X C1
• One-Piece Brass Body For Strength And Durability
• Compatible with copper pipe (ASTM B88 tubing)
• Safe installation without the need for heat or flame
• 1/4 handle provides easy on/off flow control with a 90 degree turn of the handle

The Homewerks Worldwide Lead Free Press Ball Valve is constructed of heavy forged brass and has a lever handle with press connections on both ends. Designed for residential and commercial use in no-lead potable water installations, this valve complies with all lead-free plumbing laws. This valve is installed with commercially available VUS profile crimp tools (available for purchase or rental). The double O-ring press crimp connections have pressure ratings that far exceed comparable push to connect valves. This valve also has excellent corrosion resistance and is fit for many potable water applications.

• Lead-free construction is suitable for all no-lead potable water applications, in full compliance with all lead-free plumbing standards
• Full port, quarter turn design provides a reliable shut off without slowing flow through the pipe
• Designed for installation onto type K, L or M rigid copper pipe
• Both steel handle and nut covered with an anti-corrosion treatment
• Compatible with commercially-available VUS profile crimp tools
• Double O-Ring press connection create a reliable seal that will work under higher pressures than push to connect or PEX systems
• Crimp tool installation means less materials used during install - no solder, crimp rings or solvents required

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility