The S3050-NS 1/2 HP Cast Iron / Stainless Steel Sump Pump is built with premium components for the professional contractor who wants the best. It is designed for peak performance using a water cooled, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It pushes a whopping 3900 GPH (65 GPM) at 10 ft. while only pulling 4.3 Amp, saving on the electric bill. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals with a Buna-N-Seal for long life and proven reliability.

• 4,380 GPH (73 GPM) at 0 ft lift; 3,900 GPH (65 GPM) at 10 ft. lift
• 1/2 HP, 4.3 Amp energy efficient permanent split capacitor (PSC) motor
• Heavy-duty cast iron / stainless steel construction
• S3050-NS is pump only, no switch included; see below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• 2 in. discharge for maximum output
• 20 ft. grounded power cord
• Recommended sump dual float options: DFC2 (best), item # 110607; DFC1.5 (better), item # 3553971; DFC1 (good), item # 134658
• Recommended sump vertical switch options: VSC2 (best), item # 3553973; VSC1.5 (better) - item # 3553972; VS (good) - item # 134659
• 5-year limited warranty when purchased from and installed by a contractor, otherwise 3-year warranty

JB® 6 CFM Eliminator Vacuum Pump. 2-Stage Direct Drive To Achieve Deep 25 Micron Vacuum. 0.5 Hp Motor. Brass Fittings. 0.25 X 0.38" Intake Ports (Male Flare). Check Valve Prevents Oil Backflow During Power Failure. O-Ring Seal Drain Valve. 2-Year Warranty. Large, Easy To See Sight Glass Ensures Proper Oil Level. Oil Fill Is Isolated On Cover For Easy Fill. Increased Spacing Between Intake Tee And Handle For More Room. Larger 0.5" Handle Now More Ergonomic. Tethered Safety Cap Prevents Oil Spills During Transport. Heavy-Duty Chrome Plating. Increased Oil Capacity For Cooler Running Temperature And Reduced Contamination. Mfg #DV-6E

• 2-Stage Direct Drive To Achieve Deep 25 Micron Vacuum
• 0.5 Hp Motor
• Brass Fittings
• 0.25 X 0.38" Intake Ports (Male Flare)

The S3033-NS 1/3 HP Cast Iron / Stainless Steel Sump Pump is built with premium components for the professional contractor who wants the best. It is designed for peak performance using a water cooled, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It pushes a whopping 3000 GPH (50 GPM) at 10 ft. while only pulling 4 Amp, saving on the electric bill. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals with a Buna-N-Seal for long life and proven reliability.

• 3,900 GPH (65 GPM) at 0 ft. lift; 3,000 GPH (50 GPM) at 10 ft. lift
• 1/3 HP, 4.0 Amp energy efficient permanent split capacitor (PSC) motor
• Heavy-duty cast iron / stainless steel construction
• S3033-NS is pump only, no switch included; see below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• 1-1/2 in. discharge
• 10 ft. grounded power cord
• Recommended sump dual float options: DFC2 (best), item # 110607; DFC1.5 (better), item # 3553971; DFC1 (good), item # 134658
• Recommended sump vertical switch options: VSC2 (best), Item # 3553973; VSC1.5 (better) - item # 3553972; VS (good) - item # 134659
• 5-year limited warranty when purchased from and installed by a contractor, otherwise 3-year warranty

The Cast Iron Sump Pump (CIS-50V) is a 1/2 HP all Cast Iron sump/effluent pump with a built-in vertical switch. It is designed with commercial grade materials to be an everyday pump for the professional contractor. It is built for consistent performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and quiet operation. The Cast Iron Sump Pump has a Cast Iron vortex impeller which can pass 1/2 in. solids. It pushes 3840 GPH at 10 ft. while only pulling 5.5 Amps saving on the electric bill. It is thermally protected, has Stainless Steel fasteners, built-in air relief valve, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. Its integral vertical switch is compact, dependable and adjustable. If you are looking for an everyday pump, The Cast Iron Sump Pump is as tough as they come.

• 4,300 GPH (71 GPM) at 0 ft. lift; 3,840 GPH (64 GPM) at 10 ft. lift
• 1/2 HP pump with energy efficient permanent split capacitor (PSC) motor
• All cast iron construction
• Premium pump construction includes: upper and lower sealed ball bearings for ultra-quiet operation, stainless steel fasteners for long life, carbon/ceramic seals plus 1 Buna-N-Seal, thermal protection and 1-1/2 in. discharge
• Cast iron vortex impeller can pass 1/2 in. solids
• Removable strainer
• Built-in air relief valve to help prevent air lock
• 10 ft. power cord
• 3 Year limited warranty

Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. 115-Volt oil filled motor with automatic reset overload provides safe operation. 10 ft. power cord. Vertical automatic switch. 1-1/2 in. discharge. 32 ft. shut-off. 62 GPM discharge.

• Piggyback-style float for automatic or manual operation
• Oil-filled motor with automatic reset overload provides safe operation
• Ball-bearing construction for long life
• Easily replaceable power cord with optional lengths available

The Zoeller M63 is a 1/3 HP Premium Sump Pump. It comes with a lighted plug to insure that power is on at the receptacle. It has all cast iron construction. It has a 5 year warranty.

• 5 year warranty
• Viton seals
• Enhanced switch
• Heavy duty shaded pole motor

Zinc and cast iron construction designed for maintenance-free operation. Dual ball-bearing motor and additional lip seal provide durability and longer pump life. Vertical float switch. Piggy-back style float for automatic or manual operation. Oil filled PSC motor for maximum heat dissipation, continuous bearing lubrication. Thermal overload protection with automatic reset. CSA listed. 8 ft. power cord. Shut-off head: 25 ft. Discharge: 1-1/2 in. NPT.

• Designed for drain water removal or permanent applications with small amounts of debris
• Vertical mechanical switch for 10 in. or larger sump basins
• Durable PSC motor for years of service
• Dual ball-bearing motor and additional lip seal

The Cast Iron Sump Pump (CIS-33V) is a 1/3 HP all Cast Iron sump/effluent pump with a built-in vertical switch. It is designed with commercial grade materials to be an everyday pump for the professional contractor. It is built for consistent performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and quiet operation. The Cast Iron Sump Pump has a Cast Iron vortex impeller which can pass 1/2 in. solids. It pushes 3200 GPH at 10 feet while only pulling 5 Amps. Saving on the electric bill. It is thermally protected, has Stainless Steel fasteners, built-in air relief valve, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. Its integral vertical switch is compact, dependable and adjustable. If you are looking for an everyday pump, The Cast Iron Sump Pump is as tough as they come.

• 4,000 GPH (67 GPM) at 0 ft. lift; 3,200 GPH (53 GPM) at 10 ft. lift
• 1/3 HP pump with energy efficient permanent split capacitor (PSC) motor
• All Cast Iron construction
• Premium pump construction includes: upper and lower sealed ball bearings for ultra-quiet operation, stainless steel fasteners for long life, carbon / ceramic seals plus 1 Buna-N-Seal, thermal protection and 1-1/2 in. discharge
• Cast iron vortex impeller can pass 1/2 in. solids
• Removable strainer
• Built-in air relief valve to help prevent air lock
• 10 ft. power cord
• 3 Year limited warranty

The Zoeller BN98 (98-0005) is a 1/2 HP Submersible sump/effluent pump. It is recommended for use where water gathers and gravity flow is not possible to remove it, such as basements and crawl spaces. It is also commonly used for septic tank dosing. It has a 1-1/2 in. discharge and flows at 4,320 GPH at 5 in. TDH.

• Piggy-back tethered float
• Cast iron construction for longevity and heat dissipation
• Energy efficient PSC motor design
• Passes 1/2 in. spherical solids

The Zoeller M53 submersible pump is used for dewatering also known as sump or effluent. The pump has a 1-1/2 in. NPT discharge and passes solids measuring up to 1/2 in. This 0.3 HP pump was designed for residential/light commercial use. The pump has an integral float for easy installation.

• Float operated
• Corrosion-resistant, powder coated epoxy finish
• No sheet metal parts to rust or corrode
• Stainless steel screws, switch arm, guard and handle
• No screens to clog
• Watertight neoprene square ring between motor and pump housing
• Solid buoyant polypropylene float
• Entire unit pressure tested after assembly
• Carbon and ceramic shaft seal

The S2033-NS 1/3 HP All Cast Iron Sump / Effluent Pump is built with premium construction and engineered to be a workhorse for the professional contractor. It is designed for peak performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It has a cast iron vortex impeller which can pass 1/2 in. solids. The S2033 sump / effluent pump pushes a massive 3200 GPH at 10 ft. while only pulling 5.0 Amps saving on the electric bill. It is thermally protected, has stainless steel fasteners, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. You can feel safe that The Pro Series Is Pumping For You.

• 4,000 GPH (67 GPM) at 0 ft. lift; 3,200 GPH (53 GPM) at 10 ft. lift
• Heavy duty all cast iron sump / effluent pump
• 1/3 HP Energy efficient permanent split capacitor (PSC) motor
• S2033-NS is pump only, no switch included; See below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Thermally protected PSC motor
• Cast iron vortex impeller can pass 1/2 in. solids
• 1-1/2 in. Discharge
• Built in air relief hole to help prevent air lock
• 10 ft. Grounded power cord
• Recommended Sump Dual Float Options: DFC2 (best), Item # 110607; DFC1.5 (Better), Item # 3553971; DFC1 (Good), Item # 134658
• Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
• 4 Year limited warranty when purchased from and installed by a contractor, otherwise 3 year warranty

The Zoeller BN53 is a Cast iron submersible sump/effluent pump. It has a Non-clogging vortex impeller and has a 115-Volt oil-filled, motor. Tethered float switch. Passes 1/2 in. solids. 1-1/2 in. NPT discharge. Turn On: 7-1/4 in., Off: 3 in., Maximum lift: 19 in., Maximum flow: 2580 GPH, 1/3 HP.

• Cast iron construction
• Piggy-back tethered float switch
• Passes 1/2 in. solids
• Heavy duty shaded pole motor

The M98 can be used for septic tank systems and to enhance flow step systems. This model can be used in residential or light commercial use for dewatering and transferring groundwater or effluent. The automatic pump is submersible with 1 ½ in NPT discharge.

• Corrosion-resistant, powder coated epoxy finish
• Durable cast iron construction
• Cast iron switch case, motor, pump housing and base
• No sheet metal parts to rust or corrode
• All castings are cast iron class 25-30 25000# tensile strength

This Professional Grade DUAL SUCTION Stainless Steel 1/3 HP RIDGID Pump is assembled in the USA and tested to 1 Million Cycles for performance that lasts. The 330RSDS will deliver dependable, energy-efficient, ultra-quiet performance for years to come - warrantied for 5 years. Able to pump up to 4,320 GPH. It is The Hardest Working Pump You'll Never Hear!

• Easy to install, start-to-finish in about 15 minutes
• Stainless steel housing construction with cast iron base for extended pump life
• High performance, energy efficient motor runs virtually silent
• Float guard protects float and switch for dependable operation
• Dual suction design removes debris and resists air lock
• Passes up to 1/2 in. solids
• 1-1/2 in. national pipe thread discharge complies to building codes

The Zoeller 540-0005 Flex is a water powered backup system. It does not require battery or AC power and works off of home water pressure. You must have city water (no well) to operate the pump. Can be installed in the horizontal or vertical position.

• Water Powered. No batteries to maintain
• Can be installed vertically or horizontally
• Can be installed ion the rafters
• Must be used with a municipal water supply
• High capacity and high head

The Pro Series 2400 is a top of the line Backup Sump Pump System designed as the ultimate peace-of-mind for your basement. Providing 24 hour a day monitoring, it will protect from power outage, primary AC pump failure, primary AC float failure, give extra capacity if needed, and protect from a clogged or frozen discharge line when piped separately. The 2400 has not one but, 2 floats within a protective cage for extra security. It can handle both wet cell and maintenance free batteries, and will provide 2400 GPH (40 GPM) pumping capacity at a 10 ft. lift. When maintenance is needed, or a problem arises, it sounds an alarm, pinpoints problems and provides solutions on the control panel. It exercises the pump weekly to test for proper operation. Plus, when using one of the Pro Series Connect Modules, the 2400 can alert remotely via, text, email or in app notification. It can run on AC power and battery power, allowing it to take over for the primary pump and run indefinitely off of AC. It instinctively switches to battery power when AC fails and automatically recharges when it returns. If you are looking for the ultimate peace-of-mind for your basement, you have found it The Pro Series 2400.

• 2,400 GPH (40 GPM) at 10 ft. lift
• 12-Volt DC sump pump with decades of proven reliability
• 24 Hour a day monitoring controller detects irregularities, sounds an alarm, pinpoints problems and solutions on the control panel
• Alerts if AC power is out or the circuit breaker has blown
• Runs pump weekly to test for proper operation and alerts if there is a pump problem
• Monitors the battery and alarms if maintenance or replacement is needed
• Caged dual float switch for added reliability
• Receive notifications about your Pro Series 2400 backup sump pump system while away from home using a Pro Series connect module
• Includes USB data port for linking to a Pro Series WiFi connect module (Item # 3577654)
• Includes remote terminals (dry contacts) for connection to a home security system, home automation system or other device with dry contacts
• Backup will assist primary pump if excessive amounts of water are entering the sump pit
• System pumps intermittently for days on a single charge of the Pro Series battery models B12-100 (Item # 314536088) or B-2200 (Item # 110605)
• Can run directly on AC power and battery power
• Displays percentage of power remaining in the battery
• Automatically switches to battery power when AC fails
• 13 Amp charger automatically recharges and maintains the battery
• Designed for use with maintenance or maintenance free batteries
• Accommodates an additional battery for double the run time and protection

Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. 1-1/2 in. NPT discharge. Carbon/ceramic shaft seal. Piggyback-style float for automatic or manual operation. 10ft. power cord. Vertical float switch. Oil-filled motor with automatic reset overload provides safe operation. 62 GPM. Handles up to 1/2 in. solids. On level 6-1/2 in., off level 2 in. of water.

• Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction
• Carbon/ceramic shaft seal
• Oil-filled motor with automatic reset overload provides safe operation
• Ball-bearing construction for long life

The Zoeller M95 Submersible Sump Pump is our Premium offering. It has a 1/2 HP PSC motor and a 1-1/2 in. discharge. It comes with a lighted plug to insure the unit has power at the receptacle. It has a flow capacity of 68 GPM at 10 in. TDH.

• Premium offering with 5 year warranty
• Lighted plug when AC power is present
• Energy efficient PSC motor
• Integral vertical float switch

Then Zoeller 508-0006 Aquanot Spin battery backup system comes with a high performance pump (30-gpm @ 10' tdh). It comes with a high-tech charger/Controller that self tests the system. Comes with a 3 years warranty.

• High Performance Pump (30-gpm @ 10'tdh)
• Unit self tests
• 3 Years warranty
• Low battery indicator

Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. Tethered float switch. Piggy-back style float for automatic or manual operation. Oil-filled motor with automatic reset overload provides safe operation. Ball-bearing construction for long life. CSA listed. 10 ft. power cord. Shut-off head: 32 ft. Discharge: 1-1/2 in. NPT.

• Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction
• Piggyback-style float for automatic or manual operation
• Oil-filled motor with automatic reset overload provides safe operation
• Ball-bearing construction for long life

Pro Series Pumps Wi-Fi Connect Module 2.0. Receive Notifications About The Status Of Your Battery Backup Or Combination Sump Pump System While Away From Home. Connect your Wi-Fi module to several compatible Pro Series Pumps systems (PHCC-2400, PHCC-1850, PS-C50, PS-C33, PS-C22, DFC2) using the Wi-Fi module's sub data port. Find out what is happening in your sump pit via email, text or push notification. Economical add-on since we charge no monthly or yearly fees or subscriptions. Free Pro Series Pumps Connect mobile app allows you to see your backup pump status and receive updates. Optional, add-on accessories-a 360 water sensor (PS-WS360) and high-water accessory (PS-WS) -add more protection to keep your basement dry. Easy setup gets you connected to your home Wi-Fi network with our simple quick start guide. Mfg #PS-WiFi2

• Receive Notifications About The Status Of Your Battery Backup Or Combination Sump Pump System While Away From Home
• Connect your Wi-Fi module to several compatible Pro Series Pumps systems (PHCC-2400, PHCC-1850, PS-C50, PS-C33, PS-C22, DFC2) using the Wi-Fi module's sub data port
• Find out what is happening in your sump pit via email, text or push notification
• Economical add-on since we charge no monthly or yearly fees or subscriptions

The PS-C33 Combination Backup and Primary Sump Pump System comes pre-assembled with check valves installed, weep holes drilled, completely plumbed and mounted on a platform for quick and easy installation. The energy efficient primary AC sump pump will provide 3,000 GPH (50 GPM) at a 10 ft. lift and its caged dual float (DFC1.5) will deliver years of dependable service. The backup sump pump will protect from power outages, primary AC pump failure, primary AC float failure and provide extra capacity if needed. Plus, when maintenance is needed or a problem arises, it sounds an alarm, pinpoints problems, provides solutions on the control panel, and (using one of the Pro Series CONNECT Modules) can alert remotely via, text, email or in app notification. The backup system delivers 2,400 GPH (40 GPM) of pumping capacity at a 10 foot lift and will pump intermittently for days on a single charge of the Pro Series battery.

• Pre-assembled Pro Series S3033 sump pump, enhanced dual float switch and a Pro Series 2400 backup sump pump system
• AC primary sump pump capacity: 3,000 GPH (50 GPM) at 10 ft. lift
• Backup sump pump capacity: 2,400 GPH (40 GPM) at 10 ft. lift
• 2 sets of dual float switches for 4 times the protection
• Backup system monitoring controller detects irregularities, sounds an alarm, pinpoints problems and solutions on the control panel
• Alerts if AC power is out or the circuit breaker has tripped
• Monitors the battery and alarms if maintenance or replacement is needed
• USB data port and remote terminals connect to external devices such as a Pro Series connect module, home automation systems or other devices for remote notification
• Backup will assist primary sump pump if excessive amounts of water are entering the sump pit
• Battery backup system pumps intermittently for days on a single charge
• Automatically switches to battery power when AC fails
• 13 Amp charger automatically recharges and maintains the battery
• Designed for use with maintenance or maintenance free batteries
• Warning alarms can be temporarily silenced during a power outage
• Both primary and backup sump pump run weekly tests to exercise and check for proper operation
• 4-year warranty (when installed by a professional contractor, otherwise a 3-year warranty applies)
• Includes: backup pump, monitoring control box with dual float switch, charger, battery box, primary AC pump, enhanced dual float controller with caged dual float (DFC1.5), and 2 check valves pre-assembles on a sump foot

The K2 1/3 HP Submersible Sump Pump is designed for home sump applications. The pump is constructed of heavy-duty cast iron and comes with a piggyback tethered float switch for reliable maintenance-free operation and easy replacement. The pump can fit into a 14 in. diameter or larger sump basin.

• Vortex impeller helps prevent clogging
• Includes innovative 1-1/2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
• Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
• Piggyback tethered float switch independently tested to over 1,000,000 cycles
• Easy installation
• 10 ft. power cord
• 3 year warranty

Pro Series Pumps 1000 GPH Battery Backup Sump Pump System 1,000 Gph At 10-Foot Lift 12-volt DC sump pump with decades of proven reliability Dual float switches for added reliability Automatically switches to battery power when AC fails Backup will assist primary pump if excessive amounts of water are entering the sump pit Recharges battery automatically Designed for use with maintenance-free or wet-cell or batteries System pumps intermittently for days 3-year limited warranty Mfg #PHCC-1000

• 1,000 Gph At 10-Foot Lift
• 12-volt DC sump pump with decades of proven reliability
• Dual float switches for added reliability
• Automatically switches to battery power when AC fails