The Water-Tite Techno Flange Standard Pattern Closet Flange with Techno Knockout features an inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered and protected until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4-inch Schedule 40 DWV pipe, this PVC toilet flange has a Flush-Tite design that allows for flush installation inside of 4-inch pipe. It also features a beveled hum, which makes it easier to insert into 4-inch foam-core pipe.

• PVC closet flange with inset test cap that cannot be damaged by construction equipment
• Facilitates quick and easy connection of the toilet to the plumbing system
• Techno flange knockout breaks out in one piece and will not fall down the drain
• Beveled hub design allows for easier insertion into 4-inch foam-core pipe
• Fits 3- and 4-inch PVC Schedule 40 DWV (drain, waste, and vent) pipe
• Solvent weld installation

The NIBCO 3 in. PVC DWV 221/2 elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 221/2 elbow features a hub x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires the use of a primer before cementing
• Changes direction of piping by 22-1/2 degree
• Compatible with PVC pipe
• Designed for use in non-pressurized sanitary system DWV
• Solvent weld hub x hub connection
• Maximum working pressure of 5 psi

The NIBCO PVC DWV 221/2 degree elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 221/2 degree elbow features a hub x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires the use of a primer before cementing
• Changes the direction of pipe by 22-1/2 degree
• Compatible with PVC pipe
• Designed for use in non-pressurized sanitary system DWV
• Solvent weld hub x hub connection
• Maximum working pressure of 5 psi

Designed for streamlined installation, the Water-Tite Push 'N Repair Closet Flange makes replacing old and damaged flanges as simple as pressing a new unit into place. This bolt-free push-in PVC replacement flange features a one-piece construction with a pre-lubricated gasket that is permanently attached to the flange's hub. Compatible with 3- and 4-inch PVC, DWV (drain, waste, and vent), and cast-iron piping, the Push 'N Repair Closet Flange seals the entire length of the tailpiece extension. A full 3-inch flow (with no obstruction from bolts) helps prevent clogs, and the tailpiece can be cut to adjust its length.

• Push-in PVC replacement closet flange; durable one-piece construction
• Seals entire length of tailpiece extension; tailpiece can be cut to desired length
• Pre-lubricated gasket and no bolts to tighten
• Fits 3- and 4-inch PVC, DWV (drain, waste, and vent), and cast-iron piping
• Full 3-inch flow (with no obstruction from bolts) helps prevent clogs
• Water-Tite

Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and CPVC in any combinations and the Disconnect Clip makes it easy to take the connection apart when needed.

• Light weight, durable plastic construction
• 1 disconnect clip works for multiple SharkBite push-fit fittings of the same size
• Available in 5 sizes (3/8 in., 1/4 in., 1/2 in., 3/4 in. and 1 in.)
• Makes disassembly and reuse a snap
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

Oatey 4 in. Replacement Closet Flange installs easily without tearing up your flooring or caulking piping. It fits inside of 4 in. cast iron or Schedule 40 DWV piping (sold separately). Its rubber compression gasket allows the flange to be used on many types of cast iron piping. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Use as a replacement flange for broken toilet flanges
• Compression joint provides up to 3 in. of adjustment to the riser
• Slides inside 4 in. cast iron or PVC Sch. 40 DWV pipe
• Rubber compression gasket enables the toilet flange to be used on many types of cast iron piping
• 3 stainless steel bolts tighten to compress the rubber gasket, securing the flange to the existing piping
• Installs easily without tearing up your flooring
• No caulking required

The Water-Tite Techno Flange PVC Standard Pattern Closet Flange with Techno Knockout features a unique inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4 in. Schedule 40 DWV pipe, this toilet flange has a Flush-Tite design that allows for flush installation inside of 4 in. pipe. It also features a beveled hum, which makes it easier to insert into 4 in. foam-core pipe. The Techno Flange PVC Standard Pattern Closet Flange includes a durable stainless-steel ring that makes it easy to align bolts and screws, speeding up installation.

• PVC closet flange with inset test cap that cannot be damaged by construction equipment
• Techno flange knockout breaks out in one piece and will not fall down the drain
• Beveled hub design allows easier insertion into 4 in. foam-core pipe
• Stainless-steel ring for easy alignment of bolts and screws
• Fits 3 in. and 4 in. PVC schedule 40 DWV (drain, waste and vent) pipe
• PVC

Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and CPVC in any combination and the Disconnect Clip makes it easy to take the connection apart when needed.

• 1-disconnect clip works for multiple SharkBite push-fit fittings of the same size
• Available 8 sizes: 1/4 in., 3/8 in., 1/2 in., 3/4 in., 1 in., 1 1/4 in., 1-1/2 in. and 2 in.
• Designed for hydronic heating as well as potable water distribution
• Approved for underground and behind-the-wall applications without access panels
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

Oatey Closet Flange Spacer builds up existing closet flanges when installing new flooring and renders finished floor height below grade. The stackable feature accommodates a wide range of height adjustments. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Spacer builds up existing toilet flange on below-grade flooring
• 1/4 in. thick
• Up to 3 can be stacked together
• Builds up existing toilet flange when new flooring is installed
• For use when overlaying, replacing or tiling bathroom floors
• Can be solvent welded on its horizontal surface using PVC solvent cement or secured using mechanical means
• Can be stacked to desired height, up to a maximum of 3 rings
• 1-pack

PVC Schedule Poptop Toilet Flange 4 in. Solvent weld installation only. Fits Over 4 in. Sch. 40 DWV PVC Pipe, with Knockout.

• PVC toilet flange 4 in.
• Solvent weld installation only
• Fits over 4 in. Sch. 40 DWV PVC pipe with knockout
• Durable
• PVC
• Designed for heavy-duty use

Plastic clamp reduces noise from tubing expansion and contraction. Supports copper, PEX, polybutylene and ideally isolates CPVC tubing from wood. Impact resistant to 0 degree F (-18C) Maximum Temperature: 160 degree F (71C) continuous.

• Plastic half clamp preloaded with nail
• Supports copper, PEX and polybutylene tubing
• Not recommended for CPVC tubing
• Impact resistant to 0 degree F (-18 degree C) maximum temperature: 160 degree F continuous
• Available in sizes that fit 1/2-, 3/4-, or 1 in. pipe
• 1 in.

Use the 4 in. x 3 in. PVC DWV 90 Spigot x Hub Street Closet Elbow to change the size and the direction of the piping in your DWV system. The fitting is made from PVC, which requires a primer before solvent cementing. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• 4 X 3 in. Inside Diameter and 4 1/8 X 3 1/8 in. Outside Diameter
• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• 4 in. x 3 in. to help change piping size
• Changes direction of piping 90 degrees
• Solvent welded connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

Brass compression unions join pipes of similar or different sizing. They are rated for use in low to medium pressure applications. Included compression inserts are used for soft copper and vinyl tubing.

• 10-piece per package
• Do not overtighten
• Not for use with steel tubing
• California residents see proportion 65-warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

Ideal for plumbing in tight areas, the Water-Tite 45-Degree Closet Flange comes with an adjustable ring (available in either plastic or stainless steel) that offers easy alignment of bolts and screws, speeding up installation. Choose from models that come with or without knockouts to fit either ABS or PVC systems to suit your specific installation needs. This closet flange fits securely over the top of 3-inch or inside of 4-inch Schedule 40 DWV (drain, waste, and vent) pipe.

• 45-degree angle allows closet flange to fit in tight spaces
• Available with either a plastic or a stainless-steel adjustable ring
• Designed for easy alignment of bolts and screws
• Choose from ABS or PVC models with or without knockouts
• Fits 3- and 4-inch Schedule 40 DWV (drain, waste, and vent) pipe
• PVC

Connect pipes of different types with this brass adapter. This adapter is easy to install and is perfect for gasoline, grease, vacuum, oil, water and air lines. Durable brass construction resists corrosion.

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see prop 65 warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

DWV PVC Closet Flange 3 in. x 4 in. Solvent Welds Inside 4 in. Or Over 3 in. Schedule 40 DWV Pipe. Stainless steel adjustable ring allows for easy alignment of bolts and screws. Alignment of bolts and screws.

• PVC offset toilet flange; sits 1-1/2 inches off center of drain pipe
• Shifts toilet installation location without having to change existing plumbing piping
• Stainless-steel ring for easy alignment of bolts and screws
• Full 3-inch flow helps prevent clogs
• Durable
• Closet flange

1/4 in. Brass Compression Nut (10).

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see proportion 65 warnings
• Available to HD pro only
• Do not put online

Connect pipes of different types with this brass adapter. This adapter is easy to install and is perfect for gasoline, grease, vacuum, oil, water and air lines. Durable brass construction resists corrosion.

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see prop 65 warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

Should your Kinetic Water Ram ever need repair, General makes a repair kit. The KRRK is complete with all internal O-rings and replacement parts to get your Ram back in perfect working order. General makes routine maintenance easy.

• Works with all Kinetic Water Rams
• Includes all O-rings, washers, leather cup to repair the unit
• If the Ram has difficulty holding pressure, you can easily replace all the seals at the same time using the Ram Repair Kit
• Safe, reliable and easy to install
• Repair video available on General's website
• Instructions included

Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and cPVC in any combinations and the Disconnect Clip makes it easy to take the connection apart when needed.

• Light weight, durable plastic construction
• 1 disconnect clip works for multiple SharkBite push-fit fittings of the same size
• Available in 5 sizes (3/8 in., 1/4 in., 1/2 in., 3/4 in. and 1 in.)
• Makes disassembly and reuse a snap
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

The Everbilt Pipe Square Head Plug is the perfect solution when you need to close the end of a copper, brass or iron pipe. The square head design makes installation easy. The plug features durable lead-free, rust-resistant brass construction. This fitting conforms to NSF 61 and 372.

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see prop 65 warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

Brass compression unions join pipes of similar or different sizing. They are rated for use in low to medium pressure applications. Included compression inserts are used for soft copper and vinyl tubing.

• 10-piece per package
• Do not overtighten
• Not for use with steel tubing
• California residents see proportion 65-warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

Make plumbing applications easier with this Brass Pipe Nipple. This fitting is durably constructed from lead-free, rust-resistant brass to prevent corrosion. Both ends have male threads to connect to female fittings or pipes.

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see prop 65 warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

The NIBCO PVC DWV 22-1/2 elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 22-1/2 elbow features a hub x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires the use of a primer before cementing
• Changes the direction of pipe by 22-1/2 degree
• Compatible with PVC pipe
• Designed for use in non-pressurized sanitary system DWV
• Solvent weld hub x hub connection
• Maximum working pressure of 5 psi