Use the NIBCO 4 in. PVC DWV Hub x Spigot Soil Pipe Adapter with a rubber sleeve (not included) or clamp (not included) in a non-pressurized DWV sanitary system. The adapter couples cast-iron piping (not included) with PVC piping (not included). Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires the use of a primer (not included) before cementing
• Adapts PVC piping (not included) to cast-iron piping (not included)
• Use in conjunction with a clamp (not included) or rubber sleeve (not included)
• 5 psi maximum working pressure
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200 degree F and 200 psi
• Meets all UPC, IPC and cUPC requirements

The NIBCO PVC DWV soil pipe adapter is used in residential and commercial drain, waste and vent systems. The adapter is used in a non-pressurized sanitary system which removes water-borne waste from plumbing and appliances. It adapts PVC piping to cast iron using cement and clamp or rubber sleeve.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• Primer must be used before cementing PVC
• Use with clamp or rubber sleeve
• For above-ground DWV
• Adapts PVC to cast iron using solvent
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140F

The Tectite by Apollo IPS Brass Push-To-Connect x CTS Street Transition Adapter is a reliable and versatile fitting designed to allow the user to transition from CTS (copper tube sized) pipe to IPS (iron pipe sized) pipe, typically PVC utilizing push-to-connect technology. The transition adapter has a IPS push-to-connect end indicated by the white collar and a CTS sized street or stem on the opposing end which is suitable for insertion into any existing or new CTS sized push-to-connect fitting. This versatility allows limitless options when it comes to converting from CTS to IPS sized pipes. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Extremely versatile fitting allows for transition from CTS to IPS sized push-to-connect valves, tees, or any other push-to-connect fitting configuration
• Also available in 1/2 in. and 1 in. sizes
• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• White collar indicates compatibility with PVC pipe
• Push-to-connect design allows for a simple and fast installation on any schedule 40, 80 or 120 PVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Demount clips (included) allow for fitting removal and adjustment
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The NIBCO PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires a primer before cementing
• For above-ground DWV
• Adapts PVC pipe to standard female pipe threads using solvent
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Use the NIBCO 3 in. PVC DWV MIP Adapter to adapt PVC pipe to standard female pipe threads. The adapter is used with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires the use of a primer before cementing
• Used with sanitary drainage and vent piping
• Adapts PVC pipe to standard female pipe threads
• Hub x MIPT connections
• Solvent-welded connections
• NSF/ANSI standard 14

ProPress Fittings Offer A Flameless Way To Join Copper Pipe And Fittings. The Press System Requires No Flame, Flux Or Solder. The Fittings Are Pressure Rated To 200 Psi And Have A Temperature Rating Of 0 degree - 250 degree F.