Searched for "40172600"
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Use the NIBCO 3 in. PVC DWV Coupling to connect PVC piping lengths together in drain, waste and vent piping systems. the PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths together
- Hub x hub connections
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
SharkBite Max CONNECTOR 1/2" X 1/2" FNPT. Mfg #UR072
- Doesn't Require Special Tools, Crimping, Glue Or Soldering.
Use the Viega ProPress 1-1/2 in. Coupling to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling features an internal stop indentation to stop pipe halfway through the fitting when inserted. Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Install the NIBCO 2 in. PVC DWV Hub x Hub repair coupling in a non-pressurized sanitary system DWV application to remove wastewater from plumbing fixtures and appliances. This repair coupling promotes air circulation within piping and is furnished without a center stop. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic).
- PVC plastic material
- Splices stationary lengths of PVC DWV piping
- Removes waste water from plumbing fixtures and appliances
- Suitable for use in non-pressurized sanitary system DWV applications
- Does not include a center stop
- Solvent-welded connections
- Two 2 in. fittings
- 5 psi maximum working pressure
- Requires a primer before cementing
Use the NIBCO 4 in. PVC DWV Coupling to connect PVC piping lengths in drain, waste and vent piping systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The NIBCO PVC DWV coupling is used in residential and commercial drain, waste and vent systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Connects lengths of pipe
- Compatible with PVC pipe
- Designed for use with non-pressurized sanitary system DWV
- Solvent weld hub x hub connection
- Maximum working pressure of 5 psi
Use the NIBCO 1-1/2 in. PVC DWV Coupling to connect PVC piping lengths in drain, waste and vent piping systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- ASTM D2665
- NSF/ANSI standard 14
The 3/4 in. SharkBite Push-to-Connect Straight coupling is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 3/4 in. Tectite by Apollo Push-To-Connect coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 64
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
- Repair any combination of 1-1/2" or 1-1/4" tubular brass
- Stainless steel clamps
The 1/2 in. Tectite by Apollo Push-To-Connect coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 63
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 24". Mfg #UR3088FX24
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega Smart Connect makes secure connection in less than 7 seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The NIBCO PVC DWV coupling is used in residential and commercial drain, waste and vent systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- 5 year warranty
FlowGuard® Gold™ CPVC Cap. 0.75". Slip. Mfg #039923107404
- 0.75"
- Slip
- Package Quantity 1
- TAA/BAA Compliant
Use the Viega ProPress 1-1/4 in. Coupling to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling features an internal stop indentation to stop pipe halfway through the fitting when inserted. Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there’s no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Use the Viega ProPress 2-in. Coupling with No Stop to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling has no internal stop, allowing installers to slip it into place in tight locations.Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Securely connect copper tubes with the 1 1/4 in. x 3/4 in. ProPress copper reducer. Designed for use with ASTM B88 and B75 copper tubing, this fitting allows for a smooth transition between different tube sizes. Press connections make installing this reducer quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress copper reducers install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress reducer for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress reducers are the top choice of professionals around the globe.
- Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
- Compatible systems include potable water, hydronics and more
- Installs in 7 seconds or less with a press tool - no flame, solder or flux required
- Viega smart connect technology helps installers identify unpressed fittings
- Press technology eliminates the need for burn permits or fire watch
- Wet or dry connections allow quick repairs on existing systems
- Durable internal EPDM rubber seals for watertight connections
- Rated for 0-250ºF, up to 300 PSI for water applications
- Zero lead solution certified under NSF-61-387
- Reliability guaranteed by 50-year limited warranty
Use the Viega ProPress 1-1/2 in. Coupling with No Stop to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling has no internal stop, allowing installers to slip it into place in tight locations.Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Use the Viega ProPress 1-1/4 in. Coupling with No Stop to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling has no internal stop, allowing installers to slip it into place in tight locations.Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there’s no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Securely connect copper tubes with the 1 1/4 in. by 1 in. ProPress copper reducer. Designed for use with ASTM B88 and B75 copper tubing, this fitting allows for a smooth transition between different tube sizes. Press connections make installing this reducer quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress copper reducers install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress reducer for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress reducers are the top choice of professionals around the globe.
- Designed for use with astm b88 and b75 tubing, not compatible with pex
- Compatible systems include potable water, hydronics and more
- Installs in 7 seconds or less with a press tool - no flame, solder or flux required
- Viega smart connect technology helps installers identify unpressed fittings
- Press technology eliminates the need for burn permits or fire watch
- Wet or dry connections allow quick repairs on existing systems
- Durable internal EPDM rubber seals for watertight connections
- Rated for 0-250ºF, up to 300 PSI for water applications
- Zero lead solution certified under NSF-61-387
- Reliability guaranteed by 50-year limited warranty
BrassCraft push fit union connector 1/4 in. OD is used to connect copper, PEX and other good quality plastic tubing. It is easy to use, so suitable for both do it yourselfers and pros, alike. No tools or tube inserts are required. These can be used with both hot and cold water, air, vacuum and non-volatile liquids. Also, they have zero-leak connections.
- Used to connect to copper, PEX and other good quality plastic tubing
- Requires no tube inserts
- Requires no tools
- Can be used with hot and cold water, air, vacuum and non-volatile liquids
- Zero-leak connections
- Rated for 150 psi at 70F and 60 psi at 140F
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 inches of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 degrees Fahrenheit and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year warranty when used with CPVC & copper pipe
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip (included) allows user to release the fitting from the pipe for convenient installation flexibility
- Rated to 200 degree F and 200 psi
- 1 in. pipe insertion depth = 1-5/16 in.
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 in. of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 ° F and 400 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-year warranty when used with CPVC & copper pipe
SharkBite Push-to-connect polybutylene fittings are the fastest way to transition from polybutylene pipe to PEX, copper, CPVC, PE-RT, or HDPE pipe. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe, and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. The fitting has a gray collar for the polybutylene pipe and a tan collar for all CTS (copper tube size: PEX, copper, CPVC, PE-RT, HDPE) pipes. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-Connect fittings are ideal for installation in tight spaces
- Rated to 200 ° F and 400 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-year warranty when used with polybutylene to PEX, copper, CPVC & PE-RT pipe
- 5-year warranty when used with polybutylene to SDR-9 HDPE pipe
Use the NIBCO INC 1-1/2 in. PVC DWV Repair Coupling to splice together stationary lengths of PVC-DWV piping. The coupling is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires the use of a primer before cementing
- Furnished without a center stop
- Use to splice together stationary lengths of PVC-DWV piping
- Hub x hub connections
- Solvent-welded connections
- NSF/ANSI standard 14
The 1 in. x 3/4 in. Tectite by Apollo Push-To-Connect reducer coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 67
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 inches of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 degrees Fahrenheit and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year warranty when used with CPVC & copper pipe
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip (included) allows user to release the fitting from the pipe for convenient installation flexibility
- Rated to 200 degree F and 200 psi
- 3/4 in. pipe insertion depth = 1-1/8 in.
The 3/4 in. x 1/2 in. SharkBite Push-to-Connect Reducer Coupling allows you to make a connection from 3/4 in. Pipe and reduce down to a 1/2 in. Pipe. SharkBite fittings are the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 1/2 in. Pipe Insertion Depth = 15/16 in. and 3/4 in. Pipe Insertion Depth = 1-1/8 in.
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The 3/4 in. x 1/2 in. Tectite by Apollo Push-To-Connect coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 66
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Presenting the Fernco 1006-44, a robust 4" X 4" Concrete to Cast Iron, Plastic (Sch 40, ABS) and Steel pipe coupling connector sewer and drain coupler adapter, engineered to provide seamless integration for your sewer, drain, and plumbing systems. Tailored to effortlessly accommodate 4" Concrete pipes, or pipes with outer diameters ranging from 5.25"-5.75" to 4" Cast Iron, Plastic or Steel pipes, or pipes with outer diameters ranging from 4"-4.5", ensuring versatility across various applications. Crafted with meticulous attention to quality and performance, Fernco couplings boast elastomeric polyvinyl chloride construction and 300-grade stainless steel bands, delivering a robust, leak-proof fitting resistant to chemicals and sewer gases. Trusted by industry professionals and homeowners alike, Fernco couplings establish enduring, watertight seals for sewer and drain connections, eliminating the need for cumbersome glues or primers. Suitable for seamless integration in both vertical and horizontal installations.With a maximum test pressure of 4.3 PSI and an intermittent operating temperature of 140 degrees F, these couplings offer unrivaled leak-proof, root-proof, and chemical-resistant attributes, guaranteeing unmatched reliability and longevity for your waterworks and plumbing requirements. Proudly manufactured in the United States for over 60 years, Fernco stands as the premier choice for dependable fittings.
- UNMATCHED QUALITY & PERFORMANCE: Engineered for lasting durability in plumbing, sewer, and drain applications, Fernco couplings offer a robust, leak-proof fitting, resistant to chemicals and sewer gases, ensuring reliable performance throughout their lifespan.
- FLEXIBLE FIT: Specifically designed to connect 4" Concrete to 4" Cast Iron, Plastic (Sch 40, SDR-35, ABS) and Steel pipes. This coupling accommodates pipe outer diameters (ODs) ranging from 5.25"-5.75" on one end, and 4"-4.5" on the other end.
- THE PREFERRED PIPE CONNECTOR: Fernco couplings stand as the top choice for flexible pipe connections in waste, drain, and vent applications. Trusted by plumbers, contractors, and municipalities worldwide.
- UNSURPASSED DURABILITY: Provides a permanent, leak-proof solution for sewer, drain, waste, and vent piping needs, ensuring enduring performance tailored to various requirements and standards.
- NO-MESS INSTALLATION: Skip the messy glues, primers, and their unwanted odors with quick and hassle-free installation.
- SPECS & CODES: Complies with ASTM D 5926, C 1173, CSA B602 and are UPC Approved. Rated for above ground and below ground use. Maximum test pressure: 4.3 PSI.
- American Craftsmanship: With over 60 years of proud manufacturing in the USA, Fernco's products reflect unparalleled quality and reliability, underpinned by decades of industry expertise.
Proflex allows you to make transition pipe connections that are resistant to shear forces above ground, while creating a rigid, long-lasting pipe joint. From 1 1/2" to 8" - Proflex connects cast iron, plastic, steel, copper and tubular, drain, waste and vent systems.Fernco couplings have been proudly manufactured in the USA since 1964 and are made of the highest quality elastomeric polyvinyl chloride and corrosion-resistant, rust-proof clamps. With a reputation for quality, innovation, and reliable performance, you can trust Fernco as the global leader in flexible plumbing couplings.
- UNMATCHED QUALITY & PERFORMANCE: Built to last the life of the plumbing system, Fernco couplings are made from elastomeric polyvinyl chloride for a strong, leak-proof fitting that's resistant to chemicals and sewer gases.
- NO-MESS INSTALLATION: Fernco couplings are easy to install without the hassle of messy primers, glues and their unwanted odors.
- TRUSTED & PREFFERED: Proudly manufactured in the United States.
- SPECS & CODES: Conforms to ASTM C 1460, C 564 and CSA B602. 300 stainless steel clamps are corrosion-resistant, rustproof and make installing quick and easy with just a screwdriver, nut driver or torque wrench.
- RECOMMENDED USE: Rated for Above Ground Use
The 3/4in. Tectite by Apollo Push-To-Connect Polybutylene conversion coupling is the fastest, cleanest and simplest way to transition from polybutylene pipe to copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Using the gray end for polybutylene, simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
SharkBite 3/4 in. x 1/2 in. Push-to-Connect Brass Reducing Coupling Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.
- Push-to-Connect fittings are ideal for installation in tight spaces
- Rated to 200 degree F and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
- 5-Year Warranty when used with SDR-9 HDPE Pipe
Securely connect copper tubes with the 2 in. x 1 1/2 in. ProPress copper reducer. Designed for use with ASTM B88 and B75 copper tubing, this fitting allows for a smooth transition between different tube sizes. Press connections make installing this reducer quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress copper reducers install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega ProPress reducer for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress reducers are the top choice of professionals around the globe.
- Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
- Compatible systems include potable water, hydronics and more
- Installs in 7-seconds or less with a press tool, no flame, solder or flux required
- Viega smart connect technology helps installers identify unpressed fittings
- Press technology eliminates the need for burn permits or fire watch
- Wet or dry connections allow quick repairs on existing systems
- Durable internal EPDM rubber seals for watertight connections
- Rated for 0°F to 250°F, up to 300 psi for water applications
- Zero lead solution certified under NSF-61-387
- Reliability guaranteed by 50-year limited warranty
- Designed for resistance to heavy earth loads and shear forces, while providing improved pipe alignment
- Connects CI, plastic, copper, steel or lead to CI, plastic, copper, steel or lead
The Tectite by Apollo 3/4 in. Brass Push-To-Connect PVC (Iron Pipe Size) Slip Repair Coupling is an innovation designed to make a quick repairs to Schedule 40, Schedule 80 and Schedule 120 PVC pipe. The slip capability allows a section (up to 2 in.) of pipe to be cut out allowing for the easy installation of the fitting where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. Great for emergencies and freeze repairs, the Tectite by Apollo Push-To-Connect PVC (Iron Pipe Size) Slip Repair Coupling is the fastest, cleanest and simplest way to repair PVC pipe without the use of tools, solder, open flame or glue. Unlike standard PVC repair methods, Tectite by Apollo Push-To-Connect PVC (Iron Pipe Size) Slip Repair Couplings can be installed in wet conditions Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, fitting may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any schedule 40, 80 or 120 PVC pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC, and cUPC standard requirements
- Demount clip allows for fitting removal (included)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
- Connects Cast Iron, Plastic, Steel, Copper and Tubular, Drain Waste and Vent Systems
- Neoprene Gasket with 300 Series Stainless Steel Shield and Clamps
- Boca, Sbcci Approved
The 3/8 in. x 1/2 in. SharkBite Push-Fit x MNPT Adapter allows you to make a connection to 3/8 in. pipe using a push-fit connection and gives you a 1/2 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
SharkBite 3/4 in. Push-to-Connect Brass Coupling Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.
- Push-to-Connect fittings are ideal for installation in tight spaces
- Rated to 200 degree F and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
- 5-Year Warranty when used with SDR-9 HDPE Pipe