Searched for "40173800"
The Super strut black finish malleable iron C-Clamp. Uses threaded Rod size Rod Size 3/8 in. Design Load of 350 lbs. Black Finish Malleable Iron.
- Rod size 3/8 in.
- Design load 350 lbs.
- Black finish malleable iron
- Steel
The 1/2 in. Universal Clamp is designed to be twist-inserted anywhere along the side of a channel. The clamp comes pre-assembled for easy handling. The electroplated zinc finish provides durability for any project.
- Designed to be twist-inserted anywhere along the side of a channel
- Electroplated zinc finish
- Compatible with RIGID or IMC conduit, pipe and EMT
- Use with 0.706 - 0.840 pipe, conduit or tubing
- Bolt head is combination slot and hex head for flexibility of attachment
- Square nut is captivated on the shoulder for easy 1-handed tightening
These 1-1/2 in. PVC Conduit Clamps (5-Pack) feature corrosion and UV-resistant construction for indoor and outdoor applications. These clamps expand and contract to help prevent bowing caused by temperature changes.
- Use to install PVC, non-metallic or rigid steel conduit
- High-strength PVC construction expands and contracts freely to help eliminate bowing caused by temperature variances
- UV-resistant for use in direct sunlight
- For use in accordance with conduit spacing requirements per 99 NEC article 347-B
- UL and CSA safety listings
- Requires 2 screws, 2 nuts and 2 washers for proper installation (not included)
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
The Apollo PEX 1/2 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of corrosion resistant stainless steel
- 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
- Pro pack includes 100 stainless steel pinch clamps
- Available in 3/8 in., 1/2 in., 3/4 in., and 1 in. sizes
- Meets ASTM F2098 requirements
The Apollo PEX 3/4 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of corrosion resistant stainless steel
- 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
- Pro pack includes 100 stainless steel pinch clamps
- Available in 3/8 in. 1/2 in. 3/4 in. and 1 in. sizes
- Meets ASTM F2098 requirements
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
A general-purpose industrial worm-drive hose clamp with arcial perforations for added strength. 1/2 in. Band in 300-Series SS. 10 pieces per box.
- For use in standard clamp applications
- Fits pipe and hose
- 300 series stainless steel band and housing with a 410 stainless steel hex head screw
- 1/2 in. band with arcial perforations
- Quadra-lock construction
- 10 per box
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.
- Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
- PVC construction eliminates temperature related flexing with non-metallic conduit
- UV inhibited for use in direct sunlight
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
- 25-pieces per bag
- Some clamp applications require 2 screws, 2 nuts and 2 washers
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.
- Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
- PVC construction eliminates temperature related flexing with non-metallic conduit
- UV inhibited for use in direct sunlight
- UL listed
- 20 pieces per bag
- Some clamp applications require 2 screws, 2 nuts and 2 washers
Insulate and protect piping with Water-Tite Plastic Pipe Insulators. Designed to support piping runs through wooden studs, these plastic pipe insulators are compatible with all CTS (copper tube size) tubing. The insulators isolate piping from wood and reduce noise from tubing expansion and contraction. They are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). Water-Tite Plastic Pipe Insulators are available in sizes to fit 1/2-, 3/4-, or 1-inch CTS pipe.
- Plastic pipe insulator; compatible with all CTS (copper tube size) tubing
- Supports piping in wooden studs; fits 1-3/8-inch hole
- Reduces noise from piping expansion and contraction
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in sizes to fit 1/2-, 3/4-, or 1-inch CTS pipe
- Corrosion resistant
A general-purpose industrial worm-drive hose clamp with arcial perforations for added strength. 1/2 in. Band in 300-Series SS. 10 pieces per box.
- For use in standard clamp applications
- Fits pipe and hose
- 300 series stainless steel band and housing with a 410 stainless steel hex head screw
- 1/2 in. band with arcial perforations
- Quadra-lock construction
- 10 per box
Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.
- Plastic insulating suspension clamp for all CTS (copper tube size) tubing
- Reduces noise from tubing expansion and contraction
- Ideal for isolating CPVC piping from wood
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in a variety of sizes to fit piping between 1/2 and 2 inches
- Combination clamp
1/2" Band with Arcial Perforations. Quadra-Lock Construction. SAE Standard J1508 Type F
- For use in high corrosion, marine and underground applications
- 300 series stainless steel band and housing
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10 per box
- Suitable for connections between 0.5625 in. and 1.0625 in.
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
IPS Pipe Insulator, 1/2 in. CTS, Pack Of 25. Plastic pipe insulator reduces noise from tubing expansion and contraction. Compatible with copper, cPVC and PEX Tubing.
- Plastic pipe insulator; compatible with all CTS (copper tube size) tubing
- Supports piping in wooden studs; fits 1-3/8-inch hole
- Reduces noise from piping expansion and contraction
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Pipe insulator
- 1/2 in.
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
The 2 in. Beam Clamp is intended for use in supporting a threaded rod, threaded brindle ring or electrical box. The clamp has a malleable-iron construction that is manufactured from hot-rolled carbon steel with a zinc finish. It is compatible with flanges up to 1 in. T.
- Use for supporting a threaded rod, threaded brindle ring or electrical box
- Malleable-iron construction manufactured from hot-rolled carbon steel with a zinc finish
- 1/2-13 x 1-1/2 square-head case harden set screw
- Compatible with flanges up to 1 in. thick
- 2 in. x 2-1/32 in. x 2-1/32 in.
- 1 in. jaw
- Set-screw load rating is 750 torque or 120 in.
3/4 in. Universal Pipe Clamp can be used to hold and mount metal strut or rigid conduit. Made of steel with an electro galvanized finish, the pipe clamp is corrosion resistant and has a superior paint base. Pipe clamps are of advance design and afford a new and better way of ordinary use.
- Use to secure or mount strut channel or rigid conduit
- Can be used with rigid or imc conduit, pipe and EMT
- Steel construction with electro galvanized finish
- OSHA compliant
- Straps are interchangeable with a 1-1/2 in. strut for broader applications
- Strap thickness 14 Gauge, size 3/4 in., pipe outer diameter .932 in. - 1.050 in.
Holdrite 250-H variable closure clamps are specifically engineered to dampen noise transfer between piping and building structures. Independent lab tests verify that the 250-H provide superior protection against plumbing noise disturbances. This product has been lab tested by an independent third-party to compare the relative noise level performance. ISO-3822 tested.
- Ideal for sound-rated and isolation applications
- Compatible with copper, PEX, CPVC, iron pipe and other pipe materials
- Variable closure clamp mounts directly to SB1S-H and SB2S-H
- Supports up to 1 in. pipe sizes with load ratings up to 200 lbs.
PEXRITE PEX stub-out support 701-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease.
- Stub-out clamp ideal for 1/2 in. CTS PEX-to-copper transition at lavatory/sink or toilet
- Integrates with 103-18-H bracket
- Compatible with PEX, copper and CPVC
- Tightens by hand - no tools required
- Secure fit resists forward and backward movement