A. O. Smith 80 Gallon Tall Light Service Commercial Electric Water Heater. DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life. Blue Diamond Glass Lining Provides Protection Against Leaks. CoreGard Anode Rod Provides Industry Leading Technology And Tank Protection. Two 4.5 kW Zinc Plated Copper Elements. Thermostat Adjustable From 120degree To 181degree F With A Manual Reset High Temperature Cut Off. Full Flow Tamper Resistant Brass Drain Valve. Mfg #100227965

• DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life
• Blue Diamond Glass Lining Provides Protection Against Leaks
• CoreGard Anode Rod Provides Industry Leading Technology And Tank Protection
• Two 4.5 kW Zinc Plated Copper Elements

Rheem Commercial Light Duty 80 Gallon 277-Volt 12 kW Electric Water Heater

• Simultaneous Wiring, Single Phase
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Factory installed brass drain valve allows for faster draining and servicing
• These units are suited for a wide variety of applications such as retail stores and small offices
• Available in 65, 80 and 119.9-gallon models
• 6-Year limited tank warranty for commercial applications
• Mfg #638331
• Simultaneous Wiring, Single Phase
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Factory installed brass drain valve allows for faster draining and servicing
• These units are suited for a wide variety of applications such as retail stores and small offices
• Available in 65, 80 and 119.9-gallon models
• 6-Year limited tank warranty for commercial applications
• Mfg #638331
• Simultaneous Wiring, Single Phase
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel

Rheem Commercial Light Duty 120 G 277-Volt 12 kW Electric Water Heater. Simultaneous Wiring, Single Phase. Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation. Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature. Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel. Design maximizes corrosion resistance and life of anode rod. Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion. Factory installed brass drain valve allows for faster draining and servicing. These units are suited for a wide variety of applications such as retail stores and small offices. Available in 65, 80 and 119.9-gallon models. 6-Year limited tank warranty for commercial applications. Mfg #ELD120-D 277 VOLT 12KW

• Simultaneous Wiring, Single Phase
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel

Commercial Light Duty 66 G 277-Volt 12 kW Electric Water Heater. Simultaneous Wiring, Single Phase. Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation. Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature. Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel. Design maximizes corrosion resistance and life of anode rod. Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion. Factory installed brass drain valve allows for faster draining and servicing. These units are suited for a wide variety of applications such as retail stores and small offices. Available in 65, 80 and 119.9-gallon models. 6-Year limited tank warranty for commercial applications. Mfg #ELD66-D 277 VOLT 12KW

• Simultaneous Wiring, Single Phase
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel

Rheem Marathon Eclipse Light-Duty non-metallic electric water heaters are designed for harsh environments and have the 10 year limited warranty to back it up. One of the most durable electric water heaters available, Marathon Eclipse is constructed of multiple layers of filament-wound fiberglass that give the tank unmatched strength and eliminates the need for an anode rod. The polyethylene outer shell resists dents, scratches and salt air. All models are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to 3 phase. Marathon Eclipse is available in 75 Gal., 85 Gal. and 105 Gal. capacities.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Non-metallic, seamless, blow-molded polybutene inner tank protects against rust and corrosion
• All plastic tank eliminates the need for an anode rod
• Tough molded polyethylene outer shell resists dents, scratches and salt air
• Recessed brass drain valve is out the way of brooms and scrubbers
• Titanium upper and lower elements for superior resistance to lime build-up
• Polyurethane insulation reduces energy consumption and standby heat loss
• Lightweight tank is easier to maneuver and position

Rheem Marathon Eclipse Light-Duty non-metallic electric water heaters are designed for harsh environments and have the 10 year limited warranty to back it up. One of the most durable electric water heaters available, Marathon Eclipse is constructed of multiple layers of filament-wound fiberglass that give the tank unmatched strength and eliminates the need for an anode rod. The polyethylene outer shell resists dents, scratches and salt air. All models are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to 3 phase. Marathon Eclipse is available in 75 Gal., 85 Gal. and 105 Gal. capacities.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Non-metallic, seamless, blow-molded polybutene inner tank protects against rust and corrosion
• All plastic tank eliminates the need for an anode rod
• Tough molded polyethylene outer shell resists dents, scratches and salt air
• Recessed brass drain valve is out the way of brooms and scrubbers
• Titanium upper and lower elements for superior resistance to lime build-up
• Polyurethane insulation reduces energy consumption and standby heat loss
• Lightweight tank is easier to maneuver and position

Rheem Marathon Eclipse Light-Duty non-metallic electric water heaters are designed for harsh environments and have the 10 year limited warranty to back it up. One of the most durable electric water heaters available, Marathon Eclipse is constructed of multiple layers of filament-wound fiberglass that give the tank unmatched strength and eliminates the need for an anode rod. The polyethylene outer shell resists dents, scratches and salt air. All models are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to 3 phase. Marathon Eclipse is available in 75 Gal., 85 Gal. and 105 Gal. capacities.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Non-metallic, seamless, blow-molded polybutene inner tank protects against rust and corrosion
• All plastic tank eliminates the need for an anode rod
• Tough molded polyethylene outer shell resists dents, scratches and salt air
• Recessed brass drain valve is out the way of brooms and scrubbers
• Titanium upper and lower elements for superior resistance to lime build-up
• Polyurethane insulation reduces energy consumption and standby heat loss
• Lightweight tank is easier to maneuver and position

Rheem’s light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant

Rheem’s light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant

Rheem’s light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant

Rheem’s light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant

Rheem’s light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant

Rheem’s light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light-duty applications
• Easy to convert standard models from simultaneous to non-simultaneous, single phase to 3 phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant

Rheems light-duty commercial electric water heaters with Terminal Block able to meet any light duty hot water application need. Easily convert from single phase to 3 phase. Models range from 65 through 120 Gal. They are available in 12.1kW in 208, 240, 277 and 480 Voltages. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light duty applications
• Easy to convert standard models from single phase to 3-phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant
• Ensures compliance with energy conservation standards per Title 10 to the code of federal regulations part 431