Ptacs Parts & Accessories
This outdoor louver grille is made of stamped aluminum. It is anodized to resist chalking, corrosion and oxidation. A grille is required for all new installations.
- Grille is made for FRIEDRICH 42 in. PTAC units
- Insulated wall sleeve PDXWSA sold separately
- Architectural grilles also available
- Wall outdoor louver
Galvanized steel is prepared in a multi-step process for stronger paint adhesion. Powder coated with a polyester finish. Cured in an oven for exceptional durability.
- The sleeve is insulated for thermal efficiency
- The wall sleeve is insulated to reduce noise
- For use with FRIEDRICH PTACSs
- Wall sleeve
Deep Wall Sleeves. Galvanized steel is prepared in a state-of-the-art, multistep process for stronger paint adhesion, then powder coated with a polyester finish and cured in an oven for exceptional durability. The wall sleeve is insulated for thermal efficiency and noise reduction.
- 1-piece, extended wall sleeve with built-in baffle
- For use with FRIEDRICH PTACs
- Available by special order
- For walls from 13-1/4 in. to 25-1/2 in. deep
Hinged panel door allows access to unit and return air filter. This door is a right hand swing. Dimensions are 30 inches wide by 60 inches high. The panel is painted steel in white color. Optional accessory for Friedrich vertical package air conditioners.
- Hinged panel door
- Painted steel
- Right hand swing door
- Accessory for Friedrich VPAK
Adjustable filter bracket kit allows for installation for 2 in. to 4 in. filters, includes gasket. Specifically for use in FRIEDRICH's 9K and 12K BTU Vertical Package Air Conditioners (VPAK). This is part of our FreshAire IAQ (Indoor Air Quality) portfolio that is focused on providing clean, healthy air to breathe.
- Provides a healthier indoor environment
- Includes brackets and gasket
- Allows for MERV 13 filtration in a VPAK
- Indoor Air Quality Product (IAQ)
Universal power cords enable properties to select the appropriate heater size. LCDI 230-Volt 20 Amp Cord - 3.5 kW. Plug configuration: 6-20p. For use with: FRIEDRICH PTAC Zone Aire Premier.
- LCDI 230-Volt
- 67 in. L
- Material: plastic
- Plug configuration: 6-20p
Condensate Drain Kit. Drain kit attaches to the bottom of the wall sleeve for internal draining of condensate. Drain kit attaches to the rear wall sleeve flange for external draining.
- Recommended for all PTAC units to remove excess condensate
- Comes in a 10-pack
- For use with FRIEDRICH PTACs
- 7 in. H x 7 in. W x 9 in. D
2-part sleeve that telescopes in and out and sits inside the exterior wall penetration for use with Friedrich vertical package air conditioners (VPAK). This is a required accessory for installation of Friedrich's VPAK. Vertical package terminal AC accessory.
- Required accessory for FRIEDRICH vertical package air conditioners
- 2-part sleeve
- Wall plenum telescopes from 8 in. to 14 in.
- VPAK accessory
Fresh air purifier by iWave features needlepoint bi-polar ionization to address any mold, bacteria, virus, allergens, and VOC's that may be in your air stream to ensure delivery of healthy, clean, purified air. IWave-m is a flexible ion-generating bar that can treat IAQ in nearly any HVAC application. The air purifier provides the highest level of ionization energy in the most compact size available in the market, producing 35 million ions/cc. The highly versatile iWave-m is low maintenance with no replacement parts. As the air flows past the iWave-m, the device emits positive and negative ions, creating a plasma region that purifies the air, killing mold, bacteria and viruses in the coil and living space. The ionization process also reduces allergens, smoke and static electricity, as well as controlling odors (cooking, pet, VOCs) and other particles (no more sunbeams) in the air without creating ozone or any harmful byproducts. The circuit bar is chemical resistant and highly durable for long service life. Plus, it can be folded to length in the field to any size and uses hook and loop fastener material for the flexible bar and power pack for easy installation. It is perfect for ductless HVAC systems - specifically mini-splits, commercial VRF coils, PTAC systems. The iWave-m is the most versatile and novel product on the market to address air quality for any HVAC system to solve mold issues common in hard-to-clean ductless systems.
- Duct systems up to 6 tons (2400 CFM)
- 3-year warranty (through Nu-Calgon)
- Universal voltage input - 24-Volt AC to 240-Volt AC
- Needle point ionization actively treats air in the living space
- Universal mounting with magnets
Two-part sleeve that telescopes in and out and sits inside the exterior wall penetration for use with FRIEDRICH vertical package air conditioners (VPAK). This is a required accessory for installation of FRIEDRICH's VPAK. Wall Plenum telescopes for flexibility in its installation.
- Required accessory for FRIEDRICH vertical package air conditioners
- 2-part sleeve
- Wall plenum telescopes from 5.5 in. to 8 in.
- VPAK accessory
Extruded aluminum grille that attaches to the outdoor section of the wall plenum for use with FRIEDRICH vertical package air conditioners. Optional accessory. VPAK accessory. Aluminum grille for Friedrich VPAKs.
- Optional accessory for FRIEDRICH vertical package air conditioners
- Aluminum grille
- Architectural louver
- VPAK accessory
Universal power cords enable properties to select the appropriate heater size. LCDI 230-Volt 15 Amp Cord - 2.5 kW. For use with: FRIEDRICH PTAC ZoneAire Premier.
- LCDI 230-Volt 15 Amp cord - 2.5 kW
- 67 in. length
- Material: plastic
- Plug configuration: 6-15p
Galvanized steel is prepared in a state-of-the-art multistep process for stronger paint adhesion. Then powder coated with a polyester finish and cured in an oven for exceptional durability. The wall sleeve is insulated for thermal efficiency and noise reduction.
- Extended wall sleeve
- For use with FRIEDRICH PTACs
- 1-piece
- For walls up to 17-1/2 in. deep
Adjustable filter bracket kit allows for installation of a 2 in. to 4 in. MERV 13 filter includes gasket. Specifically for use in FRIEDRICH's 18K and 24K BTU Vertical Package Air Conditioners (VPAK). This is part of our FreshAire IAQ (Indoor Air Quality) portfolio that is focused on providing clean, healthy air to breathe.
- Provides a healthier indoor environment
- Includes adjustable bracket and gasket
- Allows for MERV 13 filtration in VPAK
- Indoor Air Quality Product (IAQ)
Filter bracket kit that allows for installation of up to a 2 in. MERV 13 filter, includes gasket. Specifically for use in FRIEDRICH's 9K and 12K BTU Vertical Package Air Conditioners (VPAK). This is part of our FreshAire IAQ (Indoor Air Quality) portfolio that is focused on providing clean, healthy air to breathe.
- Provides a healthier indoor environment
- Includes brackets and gasket
- Allows for MERV 13 filtration in a VPAK
- Indoor Air Quality Product (IAQ)
Do you need cooling relief right away; How about a decreasing utility bill. Thanks to MRCOOL, you can have all these things and more with our Split System A/C Condensers Combination Units. Included in this bundle is a Spit System A/C Condenser, 80% AFUE Gas Furnace and an evaporator coil. This combination unit has a seasonal energy efficiency rating up to 16 SEER, providing maximum comfort cooling. Thanks to its high energy efficiency, you will see your utility bill decline year-after-year.
- Drain pan
- Required accessory for all Friedrich VHA18 and VHA24 Models
- Optional accessory for Friedrich VHA9 and VHA12 Models
- For use with Friedrich VPAK
Adjustable filter bracket kit allows for installation of a 2 in. to 4 in. MERV 13 filter includes gasket. Specifically for use in FRIEDRICH's 18K and 24K BTU Vertical Package Air Conditioners (VPAK). This is part of our FreshAire IAQ (Indoor Air Quality) portfolio that is focused on providing clean, healthy air to breathe.
- Provides a healthier indoor environment
- Includes adjustable bracket and gasket
- Allows for MERV 13 filtration in VPAK
- Indoor Air Quality Product (IAQ)