Get the job done right with BrassCraft's Press Connect water stops. With installation done on both wet and dry pipe systems, our press connect water stops require no oils, fillings, adhesives, or sealants during install. The 1/4 in. turn handle provides a smooth on-off operation and is easy-to-remove, protecting against accidental operation during rough-ins. 100% leak tested for leak-free performance.

• 1-piece brass body for strength and durability
• 1/4 in. handle provides easy on/off flow control with a 90° turn of the handle
• Chrome plated brass ball provides corrosion resistance and smooth operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Connections can be made on both wet and dry systems
• Chrome plated finish
• Temperature rating: 40° to 160°F
• Pressure rating: 125 psi maximum
• Product certified by IAPMO to ASME ASME A112.18.1/CSA B125.1

BrassCraft push fit union connector 1/4 in. OD is used to connect copper, PEX and other good quality plastic tubing. It is easy to use, so suitable for both do it yourselfers and pros, alike. No tools or tube inserts are required. These can be used with both hot and cold water, air, vacuum and non-volatile liquids. Also, they have zero-leak connections.

• Used to connect to copper, PEX and other good quality plastic tubing
• Requires no tube inserts
• Requires no tools
• Can be used with hot and cold water, air, vacuum and non-volatile liquids
• Zero-leak connections
• Rated for 150 psi at 70F and 60 psi at 140F

BrassCraft 3/8 in. Compression/Push x 3/8 in. Compression/Push Coupling Push Fitting is used to connect copper, PEX and other good quality plastic tubing. It is easy to use, so suitable for both DIYers and pros, alike. No tools or tube inserts are required. These can be used with both hot and cold water, air, vacuum and non-volatile liquids. Also, they have zero-leak connections.

• Used to connect to copper, PEX and other good quality plastic tubing
• Requires no tube inserts
• Requires no tools
• Can be used with hot and cold water, air, vacuum, and non-volatile liquids
• Zero-leak connections
• Rated for 150 psi at 70F and 60 psi at 140F

Use this BrassCraft push connect tee to connect copper, PEX and other good quality plastic tubing. These can be used with hot and cold water, air, vacuum and non-volatile liquids. Engineered of the highest quality, the units can endure 150 psi at 70 degree F and 60 psi at 140 degree F. Installation instructions are include.

• Used to connect to copper, PEX and other good quality plastic tubing
• Zero-leak connections
• Rated for 150 psi at 70 degree F and 60 psi at 140 degree F
• No tools needed
• No tube inserts are required
• Easy to use

Use this BrassCraft push connect tee to connect copper, PEX and other good quality plastic tubing. These can be used with hot and cold water, air, vacuum and non-volatile liquids. Engineered of the highest quality, the units can endure 150 psi at 70 degree F and 60 psi at 140 degree F. Installation instructions are include.

• Used to connect to copper, PEX and other good quality plastic tubing
• Zero-leak connections
• Rated for 150 psi at 70 degree F and 60 psi at 140 degree F
• No tools needed
• No tube inserts are required
• Easy to use

Nylon push connect male adaptor, 3/8 in. O.D. Push Connect x 3/8 in. MIP zero-leak connections. Used to connect to copper, PEX and other good quality plastic tubing with no tools or inserts required. Can be used with hot and cold water, air, vacuum and non-volatile liquids and is rated for 150 psi at 70 degree F and 60 psi at 140 degree F. No lead certified.

• Durable nylon construction
• Can be used with hot and cold water, air, vacuum, and non-volatile liquids
• Used to connect to copper, PEX and other good quality plastic tubing
• No tools required
• No tube inserts required
• Zero-leak connectors

Nylon push connect male adaptor, 1/4 in. OD Push Connect x 1/4 in. MIP zero-leak connections. Used to connect to copper, PEX and other good quality plastic tubing with no tools or inserts required. Can be used with hot and cold water, air, vacuum and non-volatile liquids and is rated for 150 psi at 70 degree F and 60 psi at 140 degree F. No lead certified.

• Durable nylon construction
• Can be used with hot and cold water, air, vacuum, and non-volatile liquids
• Used to connect to copper, PEX and other good quality plastic tubing
• No tools or tube inserts required
• Zero-leak connections
• Easy to use
• Rated for 150 psi at 70 degree F and 60 psi at 140 degree F