Pvc Conduit Systems
The 1/2 in. Female Adapter is designed for use with RIGID non-metallic conduit (RNC). The adapter is crafted with PVC, works indoors and outdoors and is CSA and UL Listed to help ensure safety. It has female threads on one end, socket end on the other.
- For use indoors and outdoors
- Compatible with RNC
- PVC construction
- CSA and UL Listed for safety
3/4 in. PVC non-metallic fitting can be used with sch. 40 and sch. 80 rigid non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join Rigid Non-Metallic Conduit (RNC)
- Compatible with schedule 40 and schedule 80 RIGID non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
3/4 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
1/2 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings ensure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
The 1 in. Non-Metallic Terminal Adapter is designed for use with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). It features male threads at 1 end and a socket end at the other and the adapter is made with PVC. It is CSA and UL listed to help ensure safety.
- For use with schedule 40 and 80 conduit
- Material PVC
- Color gray
- UL E23018
The non-conductive 3/4 in. Non-Metallic Type LB Conduit Body has a textured lid and a foam in-place gasket. Suitable for indoor and outdoor use, this conduit body hub is made of unthreaded PVC. Item is UL and CSA listed for safety.
- Compatible with rigid non-metallic conduit (RNC)
- Made of non-corrosive PVC
- Maximum operating temperature of 120 degree F
- Can be used for indoor and outdoor applications
- UL and CSA listed
Use the 2 in. Non-Metallic Male Terminal Adapter to adapt Sch. 40 and Sch. 80 rigid non-metallic conduit to threaded fittings and metallic systems. Non-metallic PVC resists corrosion, rust, impact and damage due to exposure to sunlight. The socket end attaches to a socket fitting using solvent cement.
- Adapts non-metallic conduit to threaded fittings and metallic systems
- Non-metallic PVC is heat, fire and corrosion resistant
- Designed for use with Sch. 40 and Sch. 80 non-metallic rigid conduit
- UL and CSA listed for safety and peace of mind
- Socket fitting attaches using solvent cement
The 1 in. Non-Metallic Standard Coupling is designed for joining non-metallic conduit. It is made with PVC and is compatible with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). The coupling should be attached using solvent cement and is CSA and UL listed to help ensure safety.
- Designed for joining non-metallic conduit
- Compatible with schedule 40 and schedule 80 RNC
- PVC construction
- Should be attached using solvent cement
- CSA and UL listed for safety
The 3/4 in. Female Adapter can be used indoors and outdoors. It is made with PVC and is compatible with rigid non-metallic conduit (RNC). The adapter is CSA and UL Listed to help guarantee safety.
- Compatible with RNC
- For indoor and outdoor applications
- PVC construction
- CSA and UL listed for safety
The 1 in. Type LB Non-Metallic Conduit Body is designed for use with rigid non-metallic conduit (RNC). It is made with non-corrosive PVC for durability and features non-threaded hubs and a textured lid with a foam-in-place gasket. The conduit body is UL Listed for safety.
- For use with RNC
- Suitable for indoor and outdoor use
- Non-corrosive PVC construction
- Non-threaded hubs
- Textured lid with foam-in-place gasket
- UL listed to help ensure safety
The 2 in. Non-Metallic Standard Coupling is crafted with PVC for durability. Suitable for indoor and outdoor use. Should be used with solvent cement. Using fittings with Non-metallic conduit insures system integrity.
- Designed to join non-metallic conduit
- PVC construction
- Works with schedule 40 and schedule 80 conduit
- CSA and UL listed for safety
- Should be attached using solvent cement
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 3/4 in. Access Pull Elbow enables the pulling of wires through a wall to be directed in 2 separate directions. This pull elbow is compatible with rigid non-metallic conduit. Access pull point for cable in tight radius.
- Can pull wiring in two different directions quickly and easily
- Allows for conduit changes in direction
- Durable PVC construction will not rust or corrode
- Adapter is threaded
The 1/2 in. Non-Metallic Conduit Body is a non-threaded electrical fitting. The PVC fitting will never rust and has a textured lid with a foam in-place gasket. This fitting can function in either indoor or outdoor settings.
- Made of non-corrosive PVC
- Rigid, non-metallic and non-conductive
- Compatible with rigid non-metallic conduit (RNC)
- Not threaded
- UL and CSA listed
The 1-1/4 in. Non-Metallic Male Terminal Adapter is a high-quality versatile fitting designed for use with Sch. 40 and Sch. 80 rigid non-metallic conduit. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The socket end attaches to a socket fitting using solvent cement.
- For use with schedule 40 and 80 conduit
- Color in gray
- Material PVC
- UL E23018
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with Sch. 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 1-1/2 in. Non-Metallic Terminal Adapter is designed for use with Schedule 40 and Schedule 80 rigid non-metallic conduit. The adapter features male threads on 1 end and is crafted with PVC for durability. For best results, it should be attached using solvent cement.
- For adapting non-metallic conduit to threaded fittings and metallic systems
- Can be used with schedule 40 and schedule 80 rigid non-metallic conduit
- Suitable for indoor and outdoor applications
- PVC construction
- CSA and UL listed for safety
- Should be attached using solvent cement
- 1 male-threaded end and 1 socket end
The 1 1/2 in. Non-Metallic Standard Coupling is designed to join Schedule 40 and Schedule 80 rigid non-metallic conduit (RNC). It is made with PVC, is CSA and UL listed to help ensure safety. This coupling should be attached using solvent cement.
- Designed to join schedule 40 and schedule 80 RNC
- Can be used indoors and outdoors
- PVC construction
- Attach using solvent cement
- CSA and UL listed for safety
The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box
- Non-metallic PVC is heat, fire and corrosion resistant
- Compatible with sch. 40 or sch. 80 conduit
- Ridges on the outside for concrete encasement
- UL Listed for safety and peace of mind
- Socket on 1 end with threads on offset for easy installation
The 2 in. Type LB Nonmetallic Conduit Body has a non-threaded body. Made of rigid PVC. Conduit is non-conductive and non-corrosive. Easy application.
- Textured lids
- Foam-in-place gasket
- Compatible with RNC-type conduits
- UL and CSA listed for safety
The 1 in. Non-Metallic Female Adapter works with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). It is designed to adapt non-metallic conduits to threaded fittings and metallic systems and is crafted with PVC for durability. The adapter is UL and CSA Listed to help ensure safety.
- Use with Sch. 40 and Sch. 80 RNC
- For adapting non-metallic conduits to threaded fittings and metallic systems
- PVC construction
- Socket end and female threads at opposite ends
- Attach using solvent cement
- CSA and UL Listed for safety