Spill Pallets & Decks
Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous. Available in 1-drum, 2-drum and 4-drum configurations. Removable grates feature a non-slip surface. All models meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 for use with drums.
Each IBC tank sits on a low-profile Spill Pallet with a containment capacity of 75 gallons Expansion Tanks provide 65 gallons of additional capacity. 100% polyethylene construction eliminates the potential for rust and corrosion. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175. Flow-through bulkhead fittings connect spill pallets and Expansion Tanks together, allowing spills to be channeled throughout the containment system containment capacity is thereby borrowed from adjacent spill pallets and Expansion Tanks.
Makes decanting of small quantity liquids safer, cleaner and more manageable. Features built-in pouring spout to conveniently remove spills. Designed for use in research, laboratory, medical, and industrial facilities
High Load Capacity 3,000 lbs. for 2-Drum Model. Bright, Safety Yellow Sidewalls are translucent, offering convenient visual leak detection. 100% polyethylene construction compatible with a broad range of chemicals, including acids and corrosives. Meets SPCC, EPA and Uniform Fire Code Containment Pallet Regulations.
Use under machinery and equipment to catch fluid leaks during maintenance or repairs. Rolls or folds into small package store in vehicles for onsite repairs. Keeps floors free of oily mess reduces slip hazards. Three-layer system provides maximum protection: Top layer: UV resistant geotextile fabric allows oils to pass through. Middle layer: Absorbent core oil-only polypropylene traps oils but allows stormwater to evaporate. Bottom layer: Impermeable backing keeps drips from leaching through to the ground or shop floor. Helps comply with NPDES, 40 CFR 122.26 (1999).
Use for intermediate bulk containers (IBCs), drums, or other large vessels. (All materials stored must be chemically compatible.) One-piece, molded sump holds 535 gallons meets EPA Containment and SPCC Regulations for two IBC tanks. Available with optional Bucket Shelf for either or both sides catches small leaks or spills during dispensing. Grates are easily removed for quick clean-up.
Low profile, 28 overall height allows safe and convenient IBC tank handling and dispensing. All polyethylene construction offers excellent chemical resistance and will not rust or corrode. Forkliftable allows convenient positioning to desired locations. Low-cost design with value-added features and benefits. Large 52 x 52 deck allows safe and convenient placement of IBC tanks. Small footprint 62 x 62 unit requires minimal floor space. Available with optional Bucket Shelf (Part 1160) catches leaks or spills during dispensing. 360-gallon sump capacity meets SPCC and EPA Container Storage Regulations.
Store 2 drums on the all-polyethylene, space-saving 25 7/8 x 52 Spill Deck P2 Bladder System. Low 5 3/4 deck height is the same as wooden pallets allows drums to be jockeyed onto Spill Deck Systems when standard drum handling equipment is not available. Applications include satellite waste collection, drum pump stations and storage of virgin chemicals. Meet SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations. Use the 4-drum Spill Deck Bladder System in place of taller containment pallets low 5 3/4 deck height offers significant safety and handling benefits. Rugged, double layer polyethylene bladder allows 66 gallons total containment. Use optional bulkhead fittings to connect 1, 2 or 4-drum Spill Deck modules together. A virtually unlimited number of custom configurations can be designed to meet your specific needs. Spill Deck configurations which accommodate 6 or more 55-gallon drums do not require usage of the Bladder Attachment to meet SPCC, EPA and Uniform Fire Code Regulations. Any 6-drum configuration, when connected with optional bulkhead fittings, will have a 66-gallon sump capacity without a Bladder Attachment. Spill Deck Bladder Systems require adequate aisle space to allow the Bladder to unfurl properly.
Use for intermediate bulk containers (IBCs), drums, or other large vessels. (All materials stored must be chemically compatible.) One-piece, molded sump holds 535 gallons meets EPA Containment and SPCC Regulations for two IBC tanks. Available with optional Bucket Shelf for either or both sides catches small leaks or spills during dispensing. Grates are easily removed for quick clean-up.
Keep paint washout and waste contained and keep construction sites in compliance with NPDES and other regulations. Large, 70-gallon sump contains a 55-gallon drum (not included) to hold washout until it can be disposed of properly. All-polyethylene construction will not rust or corrode. Lockable, roll-top door helps prevent unauthorized access. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Ultra-Spill Deck Bulkhead Fitting for joining Spill Decks
Ultra-Spill King features a removable deck with 4-way forklift access. Combined with its 85-gallon containment sump, drum handling and storage have never been safer. Rugged polyethylene construction features a 6,500-pound static load capacity. Place Spill King basins in strategic areas in.
Combine High Strength And Low-Profile Features While Meeting EPA Container Storage Regulations
- Low 8 3/4" profile positions drum funnels below eye level - significantly reduces the potential for hazardous fluids to splash into the eyes or face
- Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous.
- Large sump capacities meet EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations.
- Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations.
- Removable grates feature a non-slip surface.
- Superior weight capacity of the 4-drum model also allows use with IBCs
16,000 lb. weight capacity accommodates up to two full IBCs. 100% polyethylene construction has no metal parts - rust and corrosion are things of the past. 400-gallon sump capacity meets SPCC and EPA Container Storage Regulation, 40 CFR 264.175. Inner polyethylene supports feature a dense pattern of vertical ribs which provide superior strength. Rated at 16,000 lbs. UDL capacity, the Ultra-IBC Spill Pallet will provide years of service under rigorous conditions.
2- and 4-drum modules can be connected together with optional bulkhead fittings to increase overall sump capacity. A virtually unlimited number of configurations is available. Note: Heavy-Duty Ramp (Part# 2353) is required for applications involving forklifts or tow motors.
Ultra Spill King features a removable deck with 4-way forklift access. Combined with its 85-gallon containment sump, drum handling and storage have never been safer. Rugged polyethylene construction features a 6,500-pound static load capacity. Place Spill King basins in strategic areas drums can be easily rotated and replaced with the forkliftable deck. Meets SPCC, EPA and Uniform Fire Code Spill Containment Regulations. NOTE: For drum use only.
Heavy-duty polyethylene construction will not rust or corrode. Ribbed bottom keeps cans, pails and other containers elevated above any spills or leaks. Stackable for easy storage when not in use. Available in five sizes for a variety of applications
Use for intermediate bulk containers (IBCs), drums, or other large vessels. (All materials stored must be chemically compatible.) One-piece, molded sump holds 535 gallons meets EPA Containment and SPCC Regulations for two IBC tanks. Available with optional Bucket Shelf for either or both sides catches small leaks or spills during dispensing. Grates are easily removed for quick clean-up.
Standard InLine Models include 3-drum, 4-drum, 5-drum and 6-drum configurations. Narrow 25 7/8 depth allows drums to be stored in a single row along facility walls minimizes space requirements. Low profile design reduces safety and handling concerns found with taller containment pallets. Additional Spill Deck modules can be easily connected to an existing InLine configuration allows more drums to be added to your containment area as storage needs grow. All models meet SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations.
Use for intermediate bulk containers (IBCs), drums, or other large vessels. (All materials stored must be chemically compatible.) One-piece, molded sump holds 535 gallons meets EPA Containment and SPCC Regulations for two IBC tanks. Available with optional Bucket Shelf for either or both sides catches small leaks or spills during dispensing. Grates are easily removed for quick clean-up.
Ultra-Spill Deck T-Strip for joining Spill Decks
Ultra-Spill Deck Bulkhead Fitting for joining Spill Decks
Applications include satellite waste collection, general storage of chemical drums and portable drum pumping stations. Rugged design allows Flat Bottom Model and Pallet Jack Model to be safely handled by forklift under top flange. 66 gallon containment capacity. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175
Heavy-duty polyethylene construction will not rust or corrode. Ribbed bottom keeps cans, pails and other containers elevated above any spills or leaks. Stackable for easy storage when not in use. Available in five sizes for a variety of applications