The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from 2 deadly threats. The KN-COEG-3 includes 9-Volt battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

• Alarm is easily installed in any of your AC wall outlets, giving you the choice of a direct-plug, a 6 power cord or a table top unit
• 6 ft. power cord included for table top option
• UL listed and offers a 7-year life and a 5-year limited warranty
• Loud 85 dBA pulsing alarm that will sound to alert you to a potential problem
• Peak level memory
• Digital display
• 9-Volt battery backup provides protection during power outages
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM ref KN-COEG-3

The P4010DCSCO-W is a 10-year, sealed battery smoke and carbon monoxide (CO) alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event, and helps reduce confusion with verbal announcements such as "Replace alarm" at end of alarm life, and "Hush mode activated" when a nuisance alarm is silenced. The three color LED ring helps users quickly determine standby, alarm, or error mode of the alarm.Kidde P4010 Series Alarms contain 10-year tamper proof batteries that eliminate the need for battery replacement, and ends worry over unauthorized removal. Users are further shielded from late night battery chirps by the unit's Ambient Light Sensing feature, which establishes a day/night cycle and prevents alarm chirping in dark conditions.Wire-Free Interconnect triggers each connected alarm in the home to sound once smoke is detected, which can provide more time to react. The National Fire Alarm and Signaling Code (NFPA 72) has required smoke alarms in new homes to be interconnected since 1989, which traditionally involves running wiring to each alarm. Older and remodeled homes can now be updated to current standards without having to run any wiring to each alarm through walls and ceilings. Existing networks of interconnected alarms can be expanded with use of a single AC Wire-Free Alarm and additional compatible DC Wire-Free alarms.

• This alarm meets 10 year legislation laws; check local building and safety ordinances for compliance
• Voice Notifications: Unit verbally announces, "Fire!" and other alerts such as, "Replace Alarm," which helps the user better understand current status of the unit.
• Bug Screen: Protects alarm from insect ingress
• Supervised Wire-Free Interconnect: Proprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound. User is alerted if an alarm loses connection to the network.
• 10-Year Sealed Lithium Battery: Eliminates late night battery chirp
• 10-Year Limited Warranty
• End of Unit Life Warning: Alerts user the alarm is in need of replacement.
• Test / Hush Button: Tests alarm circuitry and activates Hush feature to temporarily silence nuisance alarms for up to 10 minutes. End of Unit Life and Network Error chirps can also be silenced.
• Alarm Locate Feature: Quickly find initiating alarm by silencing other alarms in the network.
• Ambient Light Sensing: Establishes Day/Night cycle and prevents chirping during the night until the next Day cycle begins.
• Intelligent Sensor Technology: Reduces nuisance alarms and offers fast response to real fires.
• Easy to Install: Simply turn the switch on the back of unit or mount to bracket to activate the alarm. Multiple units can be interconnected with push of one button.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available when any single interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P4010DCSCO-W

This Kidde 120-Volt Hardwired Combination Smoke/CO Voice Alarm with Intelligent Wire-Free Interconnect and 10-Year Battery features voice alert, wireless interconnectivity, and a sealed-in 10-Year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces the type of hazard detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring.

• Smoke and carbon monoxide detector requires hardwire installation
• Alarm features wire-free interconnectivity via radio frequency
• Interconnect with existing Kidde hardwire interconnectable units
• Alarm can also interconnect with other Kidde 10-year Wire-Free Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
• Wire-free interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
• Voice alarm announces "Fire", when a smoke or fire hazard is detected and announces "Warning Carbon Monoxide" when a CO hazard is detected
• Internal timer reminds you to replace your unit after 10 years to ensure the most reliable protection
• Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
• Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
• SmartBridge app and hub are not required for device to operate
• Interconnect is not required; this alarm also functions as a stand-alone Smoke and Carbon Monoxide detector
• A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
• 10-year limited warranty
• Check with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarms
• Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part P4010ACSCO-W

Protect your family with the Kidde Firex Combination Smoke & Carbon Monoxide Detector. The ionization Kidde Firex Combination Smoke & Carbon Monoxide Detector operates on 2-AA alkaline batteries & front-load battery door provides easy installation. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, while the Kidde Carbon Monoxide Detector alerts of poisonous carbon monoxide gas, even during power outages. The Kidde Firex Combination Smoke & Carbon Monoxide Detector has voice alert that warns of fire, carbon monoxide, or low battery. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• UL/CSFM Ref. Kidde Part 900-0216A
• Easy to install - powered by 2-AA batteries; no hardwiring required
• Protection during power outages and no low battery chirps
• Voice warning alerts of "Fire!" when a smoke or fire hazard is present, "Warning! Carbon monoxide!" when gas is detected, or "Low battery"
• 85 decibel fire alarm alerts of fire or carbon monoxide gas
• Smart hush-silences the unit during nuisance alarm situations
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Electrochemical sensor technology - detects poisonous carbon monoxide gas
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke and carbon monoxide detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected

Combination smoke/carbon monoxide alarm emits a distinct voice alarm to prevent confusion in an emergency. Easy-to-install design does not require any additional wiring for convenient use. Battery-operated construction provides further assurance during a power outage.

• Detects both smoke and carbon monoxide
• Emits a voice alarm to eliminate confusion
• Offers test/reset button and flashing LED to verify alarm operation
• Easy install, no wiring needed
• Contains a hush feature to temporarily silence false alarms

This Kidde 10-Year combination smoke and carbon monoxide detector is easy to install and alerts your family when a fire or elevated carbon monoxide levels are detected in your home. Smoke and CO sensing technologies work together to detect real fires faster and reduce cooking-related nuisance alarms. Combination alarms should be placed outside each sleeping area and on every level of the home. This alarm is powered by a 10-Year sealed-in, non-replaceable lithium ion battery. No hardwire installation required and no need to change the batteries over the 10-year life of the alarm. Simply replace the entire unit after 10 years.

• Smoke and carbon monoxide detectors should be installed in a central location outside each sleeping area, on every level of the home and in other locations where required by law
• Reduces nuisance alarms by adjusting smoke sensitivity when carbon monoxide is not detected to better discriminate between a real hazard and a false one
• 10-year lithium ion battery is sealed into the alarm and cannot be removed, preventing unwanted tampering and ensuring your alarm is always on
• No hardwire installation required
• Smart hush feature temporarily silences nuisance alarms
• Never replace a battery during the 10-year life of the alarm
• No low battery chirps; internal timer alerts you to replace the entire unit after 10-years
• Alarm is equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Alarm will automatically activate when attached to the mounting bracket
• Green LED light indicates that the alarm is working properly
• Alarm features a photoelectric sensor which may detect visible fire particles (associated with slow smoldering fires) sooner than ionization sensors
• Alarm uses electrochemical sensor to detect carbon monoxide
• 10-year limited warranty
• UL/CSFM reference model P3010K-CO