Kidde Firex 5'' Smoke Alarm Hardwired w/ 10 yr battery back-up​. 10-Year Limited Warranty On Alarm. Not A Battery Performance Claim. Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm. Simply remove the cover at least 24 hours after construction. (Warning: Dust cover must be removed for alarm to operate.). Meets the latest UL standards (UL 217 9th edition, and UL 2034 4th edition, where applicable). Cutting edge technology reduces nuisance alarms and provides fast alerts to dangerous smoke levels — giving occupants more time to escape. Quiet nuisance alarms with the push of a button. You won’t have to remove the batteries and risk a potentially inoperable device in the event of an actual emergency. Provide cues the whole family can identify, so you never miss an emergency: green = normal operation, amber = operating error; red = smoke, fire or carbon monoxide event. Goes off when smoke is detected to ensure you never miss an emergency alert. Equipped with end-of-life signal chirp, so you know when it's time to replace the unit for your safety. (Disclaimer: Not a battery performance claim.). Meets requirements of the following authorities: Underwriters Laboratories (UL), Federal Housing Authority (FHA), Housing and Urban Development (HUD), National Fire Protection Association (NFPA), and California State Fire Marshal (CSFM) when applicable. Disclaimer: Self-testing is not a substitute for a manual push test of the alarm. Mfg #21033087

• Worry-Free 10-Year Battery - No Battery Changes For 10 Years. Avoids Inconvenient Battery Replacements And Saves Up To $40 Over The Life Of The Device. (Disclaimer: 10-Year Limited Warranty On Alarm. Not A Battery Performance Claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Smoke Alarm 10-Year Battery Powered 1 Pack

• Worry-Free 10-Year Battery - No battery changes for 10 years. Avoids inconvenient battery replacements and saves up to $40 over the life of the device. (Disclaimer: 10-year limited warranty on alarm. Not a battery performance claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Combination Smoke/carbon Monoxide Alarm 10-Year Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

Firex 5'' Combo alarm Hardwired Voice alerts W/ 10 yr battery Back-Up

• Worry-Free 10-Year Battery - No battery changes for 10 years. Avoids inconvenient battery replacements and saves up to $40 over the life of the device. (Disclaimer: 10-year limited warranty on alarm. Not a battery performance claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Firex 5'' Smoke Alarm Hardwired W/ Aa battery Back-Up

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

4" Smoke Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Enjoy simple and fast installation with the included twist-and-click mounting bracket that universally fits all 4" Kidde DETECT products.

5" Smoke Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Firex 5'' Combo Alarm Hardwired W/ Aa battery Back-Up

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9-Volt battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10-year limited warranty.

• Battery operated (9-Volt battery included) provides continuous protection even during power failures
• Test button verifies battery and alarm operation
• Low battery indicator chirps when battery needs replacement
• Easy installation no wiring required
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9050

Protect your family with the Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm. The hardwired, ionization Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm operates on a 120-Volt power source with a 9-volt alkaline battery backup. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, even during power outages. The Kidde Firex Smoke Detector, Hardwired with Battery Backup has green, constant LED light that indicates AC power is connected. Red LED blinking lights flash for standby, if the alarm senses combustion, fire, or smoke, alarm memory if the alarm is activated, and hush mode. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• UL/CSFM Ref. Kidde Part i4618AC
• Hardwired 120-volt power source with a 9-volt battery back-up
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Constant green LED light indicates that AC power is connected
• Red LED blinking lights indicate when: alarm is in standby mode, smoke or fire initiated the alarm, or is in hush mode
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.

Gentex S Series Model SR - Multi-Criteria Smoke Alarm w/Relay. Multi-Criteria Photoelectric Smoke Alarm W/relay. ANSI/UL 217 9th Edition Listed. 120VAC with 9V alkaline battery backup. One set of Form A/C relay contacts . Mfg #917-0071-002

• Multi-Criteria Photoelectric Smoke Alarm W/relay
• ANSI/UL 217 9th Edition Listed
• 120VAC with 9V alkaline battery backup
• One set of Form A/C relay contacts

Kidde FireX Hardwired 120-Volt Smoke Alarm is interconnectable with other hardwired alarms. The front battery pull tab allows battery activation without removing alarm from mounting bracket. The large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp.

• 9-Volt battery backup provides protection during power outages
• 1-button design for easy operation and less confusion
• Ionization sensing technology detects the invisible fire particles associated with flaming fires
• Interconnectable with up to 24 devices
• Compatible with Kidde, fireX, code one and sentinel products
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 dB alarm when a hazard is detected
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM Ref. Kidde part #i12060

Combination Smoke/carbon Monoxide Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

Gentex S Series Model S - Multi-Criteria Smoke Alarm. Multi-Criteria Photoelectric Smoke Alarm. ANSI/UL 217 9th Edition Listed. 120VAC with 9V alkaline battery backup. Mfg #917-0070-002

• Multi-criteria photoelectric smoke alarm
• ANSI/UL 217 9th Edition Listed
• 120VAC with 9V alkaline battery backup
• 917-0070-002

BRK has been the top choice of contractors in the commercial market for over 50 years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50%, and that's important because a home structure fire was reported every 86 seconds. The faster you know about a fire, the faster you can start moving your family outside. The 9120B hardwire alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly. Sources of these fires include cooktop grease or wastebasket fires. Plus, this alarm allows easy alignment with the perfect mount feature and comes with battery backup. This BRK 9120B Hardwire Smoke Alarm is an essential product in protecting those who matter most.

• Smart technology - helps reduce the number of nuisance alarms
• Latching alarm indicator - remembers which unit initiated an alarm
• 9-Volt battery backup
• Single test/silence button

The sealed-in lithium battery design of the Kidde Lithium Battery Ionization Smoke Alarm affords you 10-year of service from this important safety device. Protect your home or business against the incidence of smoke or fire when you install this wireless alarm. The alarm sounds a warning to notify you of the presence of invisible fire particles it detects via its ionization-sensing technology. The alarm becomes automatically operational the instant it comes in contact with the mounting bracket and installation takes just minutes, thanks to its wireless design.

• Utilizes ionization-sensing technology to recognize presence of smoke
• Sounds early warning upon detection of smoke
• Smart hush temporarily silences nuisance alarms and activates only when in alarm mode
• Push-button testing checks circuitry, horn and battery function
• Sealed-in lithium battery requires no replacement over 10-year life of alarm
• Provides protection during power outages
• Red LED bulb flashes rapidly to alert that alarm has sounded since the last time test/reset button was used
• Activates automatically when attached to mounting bracket
• Installs easily
• Appropriate for residential or commercial applications
• UL/CSFM Ref. i9010

The P4010DCS-W is a 10-year, sealed battery smoke alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event and helps reduce confusion with verbal announcements such as Replace alarm at end of alarm life and Hush mode activated when a nuisance alarm is silenced. The 3 color LED ring helps users quickly determine standby, alarm or error mode of the alarm.

• 10-year sealed lithium battery eliminates late night battery chirp
• Voice notifications
• Flashing LED status ring allows easy identification of current state of alarm
• Bug screen protects alarm from insect ingression
• Additional benefits and features are available when used in conjunction with the Kidde RemoteLync bridge, which connects P4010 wire-free alarms via your homes Wi-Fi to your smart device
• 10-year limited warranty
• Interconnect with up to 24 Kidde devices
• Home security protection can be added with use of the Kidde RemoteLync camera, once triggered, a camera will send an alert to the bridge and each alarm in the home will announce, intruder detected
• Note: intruder and weather alerts require Wi-Fi connection through bridge
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference# P4010DCS-W

This Kidde 120-Volt Hardwired Voice Warning Smoke Alarm with Wire-Free Interconnect and 10-year Lithium Battery Backup features voice alert, wireless interconnectivity, and a sealed-in 10-year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces "Fire" if a hazard is detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.

• Smoke alarm requires hardwire installation
• 10-year battery backup provides protection even during power outages
• Hardwire Interconnect can create a network of Alarms without additional wiring
• Alarm can interconnect with other Kidde 10-year Wi-Fi Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
• Wi-Fi interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
• Voice alarm announces "Fire", when a smoke or fire hazard is detected
• End of life warning reminds you to replace your unit after 10 years to ensure the most reliable protection
• Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
• Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
• Remotelync SmartBridge app and hub are not required for device to operate
• Interconnect is not required; this alarm also functions as a stand-alone smoke detector
• A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
• 10-year limited warranty
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Check with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P4010ACS-W

First Alert is the category leader in fire safety and delivers reliable life safety products that help our consumers protect what matters most through innovation and performance. Working smoke alarms cut the risk of dying in a home fire by 50% and that's important because a home structure fire was reported every 86 seconds. The faster you know about a fire, the faster you can start moving your family outside. The SA350B alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly, such as a grease or wastebasket fires. Also, this alarm includes a 10-year sealed battery and test/silence button. This First Alert SA350B Dual Sensor Smoke Alarm is an essential product in protecting your home and family.

• 10-year sealed lithium Powercell prevents battery theft
• Tamper proof design
• Single button test/silence
• Perfect mount allows for easy alignment of alarm

Kidde P3010L is a 10-year, sealed lithium battery, smoke alarm with photoelectric sensing technology and Smart Hush feature. The innovative design allows for automatic activation once the unit is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm needs replacement.

• Sealed-in lithium power supply; no battery replacement required over the 10-year life of the alarm; eliminates worry about battery removal or unauthorized deactivation of alarm
• Advanced photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Self-activation alarm automatically activates when attached to the mounting bracket
• End of life warning alarm chirps every 30-seconds to indicate the unit needs replacement
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P3010L

The Kidde FireX P12040 Hardwire inter connectable Photoelectric Smoke Alarm with Battery Backup can act as a stand-alone unit or can be integrated into an existing electrical system. This unit sounds an early warning to alert you and your family of the presence of visible fire particles detected by the alarm's photoelectric sensor. Powered by 120-Volt AC, this alarm protects you, your home and the people you hold dear even during power outages, thanks to a 9-Volt battery backup. A power harness facilitates an easy installation and a simple push of a button activates this alarm's test and hush features.

• Utilizes photoelectric sensor to detect visible fire particles
• Sounds an early warning when smoke or fire particles are detected
• Many cities and states have created legislation requiring smoke alarms or specific types of smoke alarms in various settings. Certain laws also specify when homes need carbon monoxide alarms or other safety products. Understanding your local requirements can help you keep your home safe from the dangers of fire.
• 120-Volt AC, 2-wire connection
• Push-button operation tests alarm functionality
• 9-Volt battery backup provides protection during power outages
• 9-Volt battery included (21025730)
• Pull tab keeps battery fresh until initial activation
• Power harness makes installation fast and easy
• Compatible with Kidde, FireX, Code One and Sentinel products
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Dust cover protects sensor during construction
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part PE120

First Alert is the category leader in fire safety and delivers reliable life safety products that help our consumers protect what matters most through innovation and performance. Working smoke alarms cut the risk of dying in a home fire by 50% and that's important because a home structure fire was reported every 86-seconds. The faster you know about a fire, the faster you can start moving your family outside. The 9120LBL battery powered alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly. Sources of these fires include cooktop grease or wastebasket fires. Plus, this alarm features a pre-locked, 10-Year lithium battery, no need to change batteries for the life of the alarm. This First Alert 9120LBL 10-Year Smoke Alarm is an essential product in protecting your home and family.

• 10-year lithium battery backup
• Latching alarm indicator - remembers which unit initiated an alarm latching alarm indicator - remembers which unit initiated an alarm latching alarm indicator - remembers which unit initiated an alarm latching alarm indicator - remembers which unit initiated an alarm latching alarm indicator - remembers which unit initiated an alarm latching alarm indicator - remembers which unit initiated an alarm Smart Technology - helps reduce the number of nuisance alarms
• Perfect mount - allows for easy alignment of alarm
• Single button test/silence

Gentex SC Series Model SC - Multi-Criteria Smoke and Carbon Monoxide Alarm. Multi-Criteria Combination Smoke And Carbon Monoxide Alarm. ANSI/UL 217 9th Edition and ANSI/UL 2034 listed . 120VAC with 9V alkaline battery for backup . Mfg #918-0031-002

• Multi-criteria combination smoke and carbon monoxide alarm
• ANSI/UL 217 9th Edition and ANSI/UL 2034 listed 
• 120VAC with 9V alkaline battery for backup 
• 918-0031-002

The Gentex 7139CS-W is a photoelectric smoke alarm designed for residential and commercial residential applications, including homes, apartments, hospitals, hotels/motels. The 7139CS-W is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. The 7139CS-W is ANSI/UL 217 and ANSI/UL 1971 listed and is compliant with IBC/IFC Standards as well as NFPA 72.

• 120 VAC with 9VDC battery back-up
• 90dBA temporal 3 evacuation piezo horn with a 3100Hz (nominal) horn frequency
• ADA compliant 177 candela strobes (ANSI/UL 1971)
• Wall mount
• On-site washing program
• Nominal 2.5% sensitivity
• 3-position test switch
• Form C contact included
• Tandem interconnect with all Gentex tandem capable alarms
• Low or missing battery indicator
• Relays operate on battery back-up and will activate from tandem wire
• Quick disconnect wiring harness
• Fully insect screened
• 1-year warranty from date of purchase