Kidde Firex 5'' Smoke Alarm Hardwired w/ 10 yr battery back-up​. 10-Year Limited Warranty On Alarm. Not A Battery Performance Claim. Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm. Simply remove the cover at least 24 hours after construction. (Warning: Dust cover must be removed for alarm to operate.). Meets the latest UL standards (UL 217 9th edition, and UL 2034 4th edition, where applicable). Cutting edge technology reduces nuisance alarms and provides fast alerts to dangerous smoke levels — giving occupants more time to escape. Quiet nuisance alarms with the push of a button. You won’t have to remove the batteries and risk a potentially inoperable device in the event of an actual emergency. Provide cues the whole family can identify, so you never miss an emergency: green = normal operation, amber = operating error; red = smoke, fire or carbon monoxide event. Goes off when smoke is detected to ensure you never miss an emergency alert. Equipped with end-of-life signal chirp, so you know when it's time to replace the unit for your safety. (Disclaimer: Not a battery performance claim.). Meets requirements of the following authorities: Underwriters Laboratories (UL), Federal Housing Authority (FHA), Housing and Urban Development (HUD), National Fire Protection Association (NFPA), and California State Fire Marshal (CSFM) when applicable. Disclaimer: Self-testing is not a substitute for a manual push test of the alarm. Mfg #21033087

• Worry-Free 10-Year Battery - No Battery Changes For 10 Years. Avoids Inconvenient Battery Replacements And Saves Up To $40 Over The Life Of The Device. (Disclaimer: 10-Year Limited Warranty On Alarm. Not A Battery Performance Claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Smoke Alarm 10-Year Battery Powered 1 Pack

• Worry-Free 10-Year Battery - No battery changes for 10 years. Avoids inconvenient battery replacements and saves up to $40 over the life of the device. (Disclaimer: 10-year limited warranty on alarm. Not a battery performance claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Firex 5'' Combo alarm Hardwired Voice alerts W/ 10 yr battery Back-Up

• Worry-Free 10-Year Battery - No battery changes for 10 years. Avoids inconvenient battery replacements and saves up to $40 over the life of the device. (Disclaimer: 10-year limited warranty on alarm. Not a battery performance claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Combination Smoke/carbon Monoxide Alarm 10-Year Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

Firex 5'' Smoke Alarm Hardwired W/ Aa battery Back-Up

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

4" Smoke Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Enjoy simple and fast installation with the included twist-and-click mounting bracket that universally fits all 4" Kidde DETECT products.

This Kidde 10-Year carbon monoxide detector is easy to install and alerts your family when elevated carbon monoxide levels are detected in your home. This alarm is powered by a 10-Year sealed-in, non-replaceable lithium ion battery. No hardwire installation required and no need to change the batteries over the 10-year life of the alarm. Simply replace the entire unit after 10 years.

• Carbon Monoxide detectors should be installed in a central location outside each sleeping area, on every level of the home, and in other locations where required by law
• 10-year lithium ion battery is sealed into the alarm and cannot be removed, preventing unwanted tampering and ensuring your alarm is always on
• No hardwire installation required
• Smart hush feature temporarily silences nuisance alarms
• Never replace a battery during the 10-year life of the alarm
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• Alarm is equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Alarm will automatically activate when attached to the mounting bracket
• Green LED light indicates that the alarm is working properly
• Alarm uses electrochemical sensor to detect carbon monoxide
• 10-year limited warranty
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model C3010

Firex 5'' Combo Alarm Hardwired W/ Aa battery Back-Up

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

5" Smoke Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

KN-COB-DP2 AC/DC carbon monoxide alarm plugs directly into your home's standard wall outlet making installation quick and easy. The 2-AA battery backup provides protection even during power outages when many CO incidences occur. The Kidde AC/DC carbon monoxide alarm has a 10-year limited warranty.

• Tamper resist feature can be activated to cause unit to go into alarm if it has been unplugged or has come loose from the outlet
• 2 AA battery backup provides continuous protection even during power outages
• Low battery hush - silences low battery chirp warning for up to 12-hours to maintain protection without having to replace the batteries at an inconvenient time
• 10-year end of life warning alerts user to replace CO alarm after 10-years of operation, (40% longer than other CO alarms
• Many cities and states have created legislation requiring smoke alarms or specific types of smoke alarms in various settings. Certain laws also specify when homes need carbon monoxide alarms or other safety products. Understanding your local requirements can help you keep your home safe from the dangers of fire.
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model KN-COB-DP2

The Kidde KN-COB-LP2 battery operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the door without the batteries being installed. Inside cover of battery door features quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a 10-year life and a 10-year limited warranty.

• CO alarm alerts to increased levels of carbon monoxide
• Batteries included
• Test/reset: tests CO alarm circuit operation and allows you to immediately silence the alarm
• UL/CSFM reference# KN-COB-LP2

The Kidde FireX ACDC 120-Volt Carbon monoxide alarm detects carbon monoxide. This hardwired 120-Volt Inter Connectable Carbon Monoxide Alarm with 9-Volt Backup can be interconnected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included). The alarm has a fuel-cell design with a low-battery warning that issues a brief alarm chirp and a red LED light that will flash approximately every 15-seconds.

• Can be inter connected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included)
• Compatible with smoke alarms, carbon monoxide alarms and heat alarms on 1 wiring network (alarms and wiring sold separately)
• Smart inter connect system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when inter connected to a Kidde smoke alarm that is in alarm mode (smoke alarm sold separately)
• Fuel-cell design with a low-battery warning that issues a brief alarm chirp and red LED light that will flash approximately every 15-seconds
• Piezoelectric horn is rated at 85dB at 10 ft.
• Alarm will not sound if carbon monoxide levels are below 30 PPM
• 9-Volt battery backup provides protection during power outages
• Compatible with Kidde, FireX, Code One and Sentinel products
• Meets sensitivity requirements of UL 2034 single and multiple-station carbon monoxide alarms
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part KN-COB-IC

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from 2 deadly threats. The KN-COEG-3 includes 9-Volt battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

• Alarm is easily installed in any of your AC wall outlets, giving you the choice of a direct-plug, a 6 power cord or a table top unit
• 6 ft. power cord included for table top option
• UL listed and offers a 7-year life and a 5-year limited warranty
• Loud 85 dBA pulsing alarm that will sound to alert you to a potential problem
• Peak level memory
• Digital display
• 9-Volt battery backup provides protection during power outages
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM ref KN-COEG-3

The sealed-in lithium battery design of the Kidde Lithium Battery Ionization Smoke Alarm affords you 10-year of service from this important safety device. Protect your home or business against the incidence of smoke or fire when you install this wireless alarm. The alarm sounds a warning to notify you of the presence of invisible fire particles it detects via its ionization-sensing technology. The alarm becomes automatically operational the instant it comes in contact with the mounting bracket and installation takes just minutes, thanks to its wireless design.

• Utilizes ionization-sensing technology to recognize presence of smoke
• Sounds early warning upon detection of smoke
• Smart hush temporarily silences nuisance alarms and activates only when in alarm mode
• Push-button testing checks circuitry, horn and battery function
• Sealed-in lithium battery requires no replacement over 10-year life of alarm
• Provides protection during power outages
• Red LED bulb flashes rapidly to alert that alarm has sounded since the last time test/reset button was used
• Activates automatically when attached to mounting bracket
• Installs easily
• Appropriate for residential or commercial applications
• UL/CSFM Ref. i9010

Combination Smoke/carbon Monoxide Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

Protect your family with the Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm. The hardwired, ionization Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm operates on a 120-Volt power source with a 9-volt alkaline battery backup. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, even during power outages. The Kidde Firex Smoke Detector, Hardwired with Battery Backup has green, constant LED light that indicates AC power is connected. Red LED blinking lights flash for standby, if the alarm senses combustion, fire, or smoke, alarm memory if the alarm is activated, and hush mode. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• UL/CSFM Ref. Kidde Part i4618AC
• Hardwired 120-volt power source with a 9-volt battery back-up
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Constant green LED light indicates that AC power is connected
• Red LED blinking lights indicate when: alarm is in standby mode, smoke or fire initiated the alarm, or is in hush mode
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.

Kidde FireX Hardwired 120-Volt Smoke Alarm is interconnectable with other hardwired alarms. The front battery pull tab allows battery activation without removing alarm from mounting bracket. The large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp.

• 9-Volt battery backup provides protection during power outages
• 1-button design for easy operation and less confusion
• Ionization sensing technology detects the invisible fire particles associated with flaming fires
• Interconnectable with up to 24 devices
• Compatible with Kidde, fireX, code one and sentinel products
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 dB alarm when a hazard is detected
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM Ref. Kidde part #i12060

The P4010DCS-W is a 10-year, sealed battery smoke alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event and helps reduce confusion with verbal announcements such as Replace alarm at end of alarm life and Hush mode activated when a nuisance alarm is silenced. The 3 color LED ring helps users quickly determine standby, alarm or error mode of the alarm.

• 10-year sealed lithium battery eliminates late night battery chirp
• Voice notifications
• Flashing LED status ring allows easy identification of current state of alarm
• Bug screen protects alarm from insect ingression
• Additional benefits and features are available when used in conjunction with the Kidde RemoteLync bridge, which connects P4010 wire-free alarms via your homes Wi-Fi to your smart device
• 10-year limited warranty
• Interconnect with up to 24 Kidde devices
• Home security protection can be added with use of the Kidde RemoteLync camera, once triggered, a camera will send an alert to the bridge and each alarm in the home will announce, intruder detected
• Note: intruder and weather alerts require Wi-Fi connection through bridge
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference# P4010DCS-W

This Kidde 120-Volt Hardwired Voice Warning Smoke Alarm with Wire-Free Interconnect and 10-year Lithium Battery Backup features voice alert, wireless interconnectivity, and a sealed-in 10-year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces "Fire" if a hazard is detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.

• Smoke alarm requires hardwire installation
• 10-year battery backup provides protection even during power outages
• Hardwire Interconnect can create a network of Alarms without additional wiring
• Alarm can interconnect with other Kidde 10-year Wi-Fi Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
• Wi-Fi interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
• Voice alarm announces "Fire", when a smoke or fire hazard is detected
• End of life warning reminds you to replace your unit after 10 years to ensure the most reliable protection
• Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
• Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
• Remotelync SmartBridge app and hub are not required for device to operate
• Interconnect is not required; this alarm also functions as a stand-alone smoke detector
• A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
• 10-year limited warranty
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Check with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P4010ACS-W

Combination smoke/carbon monoxide alarm emits a distinct voice alarm to prevent confusion in an emergency. Easy-to-install design does not require any additional wiring for convenient use. Battery-operated construction provides further assurance during a power outage.

• Detects both smoke and carbon monoxide
• Emits a voice alarm to eliminate confusion
• Offers test/reset button and flashing LED to verify alarm operation
• Easy install, no wiring needed
• Contains a hush feature to temporarily silence false alarms

The digital readout of the Kidde Plug-In Digital Carbon Monoxide Alarm with 9-Volt Backup continuously displays carbon monoxide levels from 30 to 999 parts per million (PPM) and will sound an 85dB alarm when dangerous levels are reached. The carbon monoxide level sensed is continuously displayed and updated every 15-seconds and the peak level memory shows the highest level of carbon monoxide present since the last time the unit was reset or unplugged. Protection continues during power outages thanks to a 9-Volt battery backup.

• Plug-in carbon monoxide detector with digital readout
• 85dB alarm sounds when carbon monoxide reaches dangerous levels so you can protect your family
• Test/reset button to check for proper operation and reset the unit
• 9-Volt battery backup provides protection during power outages
• Displays carbon monoxide levels from 30 to 999 PPM
• Updates digital reading every 15-seconds
• Peak level memory displays highest carbon monoxide level recorded since previous reset or unplugging
• Plugs into AC receptacles
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.

This Kidde 10-Year combination smoke and carbon monoxide detector is easy to install and alerts your family when a fire or elevated carbon monoxide levels are detected in your home. Smoke and CO sensing technologies work together to detect real fires faster and reduce cooking-related nuisance alarms. Combination alarms should be placed outside each sleeping area and on every level of the home. This alarm is powered by a 10-Year sealed-in, non-replaceable lithium ion battery. No hardwire installation required and no need to change the batteries over the 10-year life of the alarm. Simply replace the entire unit after 10 years.

• Smoke and carbon monoxide detectors should be installed in a central location outside each sleeping area, on every level of the home and in other locations where required by law
• Reduces nuisance alarms by adjusting smoke sensitivity when carbon monoxide is not detected to better discriminate between a real hazard and a false one
• 10-year lithium ion battery is sealed into the alarm and cannot be removed, preventing unwanted tampering and ensuring your alarm is always on
• No hardwire installation required
• Smart hush feature temporarily silences nuisance alarms
• Never replace a battery during the 10-year life of the alarm
• No low battery chirps; internal timer alerts you to replace the entire unit after 10-years
• Alarm is equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Alarm will automatically activate when attached to the mounting bracket
• Green LED light indicates that the alarm is working properly
• Alarm features a photoelectric sensor which may detect visible fire particles (associated with slow smoldering fires) sooner than ionization sensors
• Alarm uses electrochemical sensor to detect carbon monoxide
• 10-year limited warranty
• UL/CSFM reference model P3010K-CO

Protect your family with the Kidde Firex Combination Smoke & Carbon Monoxide Detector. The ionization Kidde Firex Combination Smoke & Carbon Monoxide Detector operates on 2-AA alkaline batteries & front-load battery door provides easy installation. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, while the Kidde Carbon Monoxide Detector alerts of poisonous carbon monoxide gas, even during power outages. The Kidde Firex Combination Smoke & Carbon Monoxide Detector has voice alert that warns of fire, carbon monoxide, or low battery. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• UL/CSFM Ref. Kidde Part 900-0216A
• Easy to install - powered by 2-AA batteries; no hardwiring required
• Protection during power outages and no low battery chirps
• Voice warning alerts of "Fire!" when a smoke or fire hazard is present, "Warning! Carbon monoxide!" when gas is detected, or "Low battery"
• 85 decibel fire alarm alerts of fire or carbon monoxide gas
• Smart hush-silences the unit during nuisance alarm situations
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Electrochemical sensor technology - detects poisonous carbon monoxide gas
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke and carbon monoxide detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected

This Kidde 120-Volt Hardwired Combination Smoke/CO Voice Alarm with Intelligent Wire-Free Interconnect and 10-Year Battery features voice alert, wireless interconnectivity, and a sealed-in 10-Year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces the type of hazard detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring.

• Smoke and carbon monoxide detector requires hardwire installation
• Alarm features wire-free interconnectivity via radio frequency
• Interconnect with existing Kidde hardwire interconnectable units
• Alarm can also interconnect with other Kidde 10-year Wire-Free Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
• Wire-free interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
• Voice alarm announces "Fire", when a smoke or fire hazard is detected and announces "Warning Carbon Monoxide" when a CO hazard is detected
• Internal timer reminds you to replace your unit after 10 years to ensure the most reliable protection
• Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
• Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
• SmartBridge app and hub are not required for device to operate
• Interconnect is not required; this alarm also functions as a stand-alone Smoke and Carbon Monoxide detector
• A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
• 10-year limited warranty
• Check with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarms
• Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part P4010ACSCO-W