Teks 9 x 1-1/2 in. Zinc-Plated Steel Hex-Washer-Head Roofing Screws (400-Pack) provide secure metal-to-wood fastening and strong holding power without pre-drilling. The sharp self-piercing point is ideal for fastening corrugated roofing panels to wood structures. A self-sealing EPDM washer provides a waterproof seal and a premium finish provides exceptional corrosion resistance in harsh outdoor environments. Installs with a standard screw gun and a 1/4 in. hex drive bit.

• Ideal for metal to wood applications and provides exceptional corrosion resistance especially when fastening roofing panels to wood structures
• Self-sealing EPDM washer provides a waterproof seal in harsh outdoor environments
• High performance drive surfaces and hex head reduce camp-outs to penetrate surface the first time for easy installation
• Zinc based with Thermalset polyesther metal filled coating (metal in coating is zinc)
• Precise sharp point designed to drill, tap and fasten all in 1 motion
• No pre-drilling necessary
• Provides secure fastening with strong holding power
• Highly versatile
• Common project applications: corrugated roofing, HVAC, steel stud framing, gutters, flashing for corrugated roofing and register vents

Teks #8 x 3/4 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (180-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks 8-18 x 3/4 in. Fine Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (600-Pack) provide secure 20-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, hvac, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks 8-15 x 2 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (100-Pack) provide secure 26-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks #10 x 1 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (140-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks 8-15 x 3/4 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (600-Pack) provide secure 26-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks #6-18 x 1/2 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (320-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks 8-15 x 1 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (510-Pack) provide secure 26-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, hvac, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks #8 x 1 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (170-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks 8 x 1-5/8 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (120-Pack) provide secure 26-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks 8-15 x 2-1/2 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (80-Pack) provide secure 26-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks #10 x 5/8 in. Zinc-Plated Steel Pancake-Head Self-Tapping Drill-Point Screws (190-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks #10-16 x 3/4 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (150-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks 10 x 1-7/16 in. Phillips Wood-to-Metal Self-Tapping Screws with Wings (100-Pack) help you secure wood to metal without pre-drilling. The 10 Wood-to-Metal screw is ideal for use with 1/8 in. to 16-Gauge steel. Special wings ream a hole in the wood to prevent thread engagement during drilling. The wings break away when self-tapping into metal. Providing a secure hold. Installs with a drill or impact driver and a 2 Phillips bit. No pre-drilling required. Ideal for fastening applications such as wood headers and plywood to steel frames.

• Secure wood to metal (1/8 in. to 16-Gauge) without pre-drilling
• Precision point with wings designed to drill, tap and fasten all in one motion
• Climacoat premium coating provides a long-life finish for exterior applications
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Wings ream a hole in the wood to prevent thread engagement and break away when self-tapping into metal
• No pre-drilling necessary
• Common project applications: electronics, license plates, electrical boxes, switch plates, furniture

Teks 8 x 1 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (170-Pack) provide secure 26-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks 8 x 3/4 in. Fine Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (200-Pack) provide secure 20-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening

Teks #14 x 3/4 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (70-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks #10 x 3/4 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (150-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal

• Teks Metal Fastening screws provide secure metal to metal fastening without the need to pre-drill and reduces cam-outs for high performance drive surfaces and recess
• Precise point designed to drill, tap and fasten all in 1 motion
• High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
• Zinc plated finish protects the job's appearance
• No slippage even with older sockets and worn bits
• No pre-drilling is necessary
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

Teks 8 x 1-1/4 in. Fine Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (140-Pack) provide secure 20-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a 2-Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.

• Ideal for thicker metal to metal applications (20-gauge to 12-gauge) or metal to wood applications
• Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
• Engineered for applications requiring a wide, low-profile head
• Zinc plated finish protects the job's appearance
• Drill, tap and fasten in one motion
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
• No pre-drilling necessary
• For use in HVAC, stucco, plaster, chicken wire and metal stud steel fastening