The Milwaukee 2202-20 Voltage Detector with LED is used for residential, commercial and industrial applications. The 2202-20 can detect between 50 and 1000-Volt AC and has an industry leading safety rating of CAT IV 1000-Volt. With a built in bright LED work light; the 2202-20 is two tools in one. The durable tip allows for easy checking of power outlets. The 2202-20 is also designed with a green "Power On" indicator light so you know the voltage detector is working properly before use. Includes 2 AAA batteries.

• Non-contact voltage detection technology
• Extra-bright LED work light makes working in dark areas easy
• Category IV 1,000-Volt safety rating is safe for most applications and including industrial applications
• Rear push-button design is easy to use
• Green, power-on indicator light tells you the voltage detector is working properly before use
• Powered by 2 easy-to-replace AAA batteries (included)
• Pocket clip for easy storage and retrieval from your pocket

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

• GFCI Outlet Tester detects the most common wiring problems in standard and GFCI receptacles
• Electrical outlet tester works on GFCI outlets and confirms operation of the ground fault protective device
• Built to withstand a 6.6 ft. (2 m) drop
• Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
• Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.

• Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
• Detects voltage with simultaneous visual and audible voltage indicators
• Bright flashlight illuminates work area and may be used independent of voltage detection function
• Green light indicates no voltage
• Lightweight, compact tool with pocket clip provides convenient storage and quick access
• Auto power-off feature conserves and extends battery life
• CAT IV 1000V rating provides expanded operation and protection
• Screw-thread battery cap with O-ring ensures protection against dust and water ingress
• 6.6 ft. (2 m) drop protection
• IP67: Dustproof and waterproof
• Conforms to CE requirements
• US Patent 10,073,142, D750,985 and other patents pending

Get perfect wire stripping with the Milwaukee Fixed Blade Hawkbill Knife. Designed to stay sharper longer than most other knives, a full metal tang provides durability for tough cuts. The large handle lets you work comfortably even with gloves. A molded sheath provides easy carrying and storage.

• Ideal for dripping cable
• Stays sharper longer
• Durable sheath included
• Stainless steel blade
• 8.5 in. overall length
• Large handle optimized for use with gloves
• Full tang design

Milwaukee 6 in 1 Combination Pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe, and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation, and won't open when stored in a pouch or backpack. Milwaukee 6 in 1 Combination Pliers deliver maximum productivity for the trades. The Milwaukee 48-22-3079 is perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all combination pliers. The Milwaukee 48-22-3079 includes (1) 48-22-3079 Combination Plier.

• Reaming head design - smooths edges of metal pipe from 1/2 in. to 1 in.
• Bolt cutter - thread and cut #6 and # 8 bolts to preferred length
• Wire stripper - strips 8 AWG to 18 AWG (solid wire), 10 AWG to 20 AWG (stranded wire)
• 1-handed swing lock - easy 1-handed use and remains locked while in pouch, spring loaded for easy opening
• Curved cutting blade for clean cuts through larger wire sizes
• Rust protection - increases tool life by reducing corrosion
• Forged alloy steel - for maximum tool strength and durability
• Tether-ready handle loops

This compact, lightweight wire-stripping and cutting tool is designed to cut 10 - 18 AWG solid wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places.

• Cuts, strips, loops and gauges 10-18 AWG solid wire
• Spring-loaded action for self-opening
• Easy-to-read wire gauge markings on both sides for stripping in either direction
• Hardened steel with precision ground stripping holes and wire looping and bending holes
• Made in USA
• Black-oxide finish resists corrosion
• Textured handles provide a firm, comfortable grip
• Color-coded handles: red indicates stranded wire, yellow indicates solid wire
• Shear-type cutting blades for clean cuts

This compact, lightweight wire stripper and cutter cleanly cuts solid and stranded copper wire. Strong-gripping serrated nose for easy bending, shaping, and pulling of wire. Handles are double-dipped for comfortable grip. Curved handles help reach into confined areas.

• Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 screws
• Precision ground stripping holes
• Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
• Holes for looping and bending wire
• Made in USA
• Shear-type cutting blades for clean cuts
• Double-dipped comfort grips with curved handles
• Coil spring provides fast self-opening action
• Easy-to-read markings
• Handy closure lock for convenient storage
• Made in USA

Hand tools are a part of every toolbox. With exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools offer superior performance on every job. These pliers can be used to strip solid or stranded wire and feature a locking mechanism and spring return.

• Cut and strip copper or aluminum 10-20 AWG solid and stranded wire
• Built-in locking mechanism
• Holes in the side of jaws are intended for looping solid wire
• Spring return
• Use pliers to tighten or loosen small nuts
• Comfortable high-leverage handle
• 6.5 in. in length
• Comfortable high-leverage handles
• Wire gauge #10 - #20 AWG
• Length 6-1/4 in.

Milwaukee Digital GFCI Receptacle Tester Lcd Screen Offers Clear Reading Of Wiring Conditions, Voltage, And Trip Time Over Molded Grip for Durability and Comfort Verifies the Functionality of a Ground Fault Protective Device on GFCI Outlets LED Visual Indicators Identifies Wiring Conditions in Electrical Outlets CAT II 135V Safety Rating Built to Withstand a 6-Foot Drop Powered by (2) AAA batteries 2-Year Warranty (1) Digital GFCI Receptacle Tester Mfg #2224-20

• Lcd Screen Offers Clear Reading Of Wiring Conditions, Voltage, And Trip Time
• Over Molded Grip for Durability and Comfort
• Verifies the Functionality of a Ground Fault Protective Device on GFCI Outlets
• LED Visual Indicators Identifies Wiring Conditions in Electrical Outlets

Milwaukee 48-22-6109 Wire Strippers feature a swing-lock design for fast 1-handed operation and won't open when stored in a pouch or backpack. These pliers feature a curved blade design that allows for clean cuts through larger wire sizes and have the capability to cut #6 and #8 bolts. The pliers ergonomic handle form and lightweight design allows for maximum versatility and smooth wire stripping. The Milwaukee 48-22-6109 is perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all wire pliers. The Milwaukee 48-22-6109 includes one 48-22-6109 Wire Stripper.

• 1-handed swing lock, easy 1-handed use and remains locked while in pouch, spring loaded for easy opening
• Bolt cutter thread and cut #6 and # 8 bolts to preferred length
• Curved cutting blade for clean cuts through larger wire sizes
• Ergonomic handle form for increased comfort and better grip in the hand
• Rust protection increases tool life by reducing corrosion
• Light-weight design, for maximum versatility and smooth 1-handed use
• Limited lifetime warranty

This Wire Stripper Long-Nose Multi Tool cuts and strips 10-20 AWG solid and 12-22 AWG stranded wire as well as crimps insulated and non-insulated connectors. The tip is designed to grab, pull and bend wires. It is optimized for ideal leverage when cutting and crimping. Precision shear-type blades make cutting easier.

• Wire Stripper strips 10-20 AWG solid, 12-22 AWG stranded wire
• Multi Tool crimps insulated and non-insulated connectors
• Tip designed to grab, pull and bend the smallest of wires
• Reinforced head reduces flex; optimized for ideal leverage when stripping and crimping
• Made in USA
• Precision shear-type cutting blades for easier cutting
• Do not use to cut steel wire
• Patent US D827,403

Gardner Bender Ugly's Electrical References Revised 2020 Edition is a helpful guide for the professional electrician. The book includes common mathematical formulas and specific rules and regulations from the National Electric Code. The easy-to-understand format makes it an ideal resource for double checking commonly used equations.

• On-the-job reference guide for the professional electrician
• Highlights common mathematical formulas and equations
• Contains guidelines and illustrations
• Includes rules and regulations based on the 2002 national electric code
• Comprehensive format

The Gardner Bender GFCI Outlet Tester was ergonomically designed for today's electrical professional. This unit plugs into any standard 120-Volt outlet and indicates the wiring condition of the outlet. The GFI-3501 also has the ability to test any outlet protected by a ground fault receptacle to ensure proper interruption operation. With charts on both sides of the unit, any user can quickly identify which of the six wiring conditions is indicated by the integrated neon lamps. Test any GFCI outlet, standard outlet, or extension cord.

• Easy to use
• Tests for 7 conditions: ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring
• Tester trips GFCI between 6 - 9 ma
• Succession of yellow and red lights provides indication of circuit status or specifies wiring errors

Milwaukee Dual Range Voltage Detector Automatically Differentiates 10-49? & 50-1000? Ac Different colors identify voltage range Auto-Off Durable belt clip allows for easy storage and retrieval from pocket Blade-tip for checking outlets CAT IV 1000V safety rating Powered by (2) AAA batteries 2 Year Warranty Dual Range Voltage Detector, (2) AAA Batteries Mfg #2208-20

• Automatically Differentiates 10-49? & 50-1000? Ac
• Different colors identify voltage range
• Auto-Off
• Durable belt clip allows for easy storage and retrieval from pocket​

The Klein Tools Crimping and Cutting Tool crimps both insulated and non-insulated 10-22 AWG terminals and connectors. The tapered nose which is great when working in tight spaces. The wire cutter in the nose specially hardened for long life.

• Crimper crimps 10 to 22 AWG insulated and non-insulated terminals
• Cutting and Crimping Tool has specially hardened wire cutter in nose
• Tapered nose design for working in confined spaces
• Crimping die marked for insulated and non-insulated solderless terminals and connectors
• Made in USA
• Plastic-dipped, cushioned handles for comfort

Milwaukee GFCI Receptacle Tester Over Molded Grip For Durability And Comfort Verifies the Functionality of a Ground Fault Protective Device on GFCI Outlets LED Visual Indicators Identifies Wiring Conditions in Electrical Outlets CAT II 300V Safety Rating Built to Withstand a 6-Foot Drop 2-Year Warranty (1) GFCI Receptacle Tester Mfg #2223-20

• Over Molded Grip For Durability And Comfort
• Verifies the Functionality of a Ground Fault Protective Device on GFCI Outlets
• LED Visual Indicators Identifies Wiring Conditions in Electrical Outlets
• CAT II 300V Safety Rating

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The GVD-3504 tester from Gardner Bender indicates the presence of AC Voltage from 50-Volt - 600-Volt with visual (flashing) and audible (beeping) indicators.

• Built-in safe test feature assures batteries are operating properly
• Compact design fits in shirt pocket
• Operates from 1-AAA battery
• Tests outlets, switches, circuit breaker panels, wiring, light fixtures
• Operates from one "AAA" battery (included)
• Patented
• Tests: outlets, switches, circuit breaker panels, wiring, light fixtures

Milwaukee Digital Multimeter Can Determine A Voltage Range Up To 600-Volt Ac/dc Device alerts both audibly and visually when voltage is present Includes an easy-to-read back lit display Auto Range to mV Capacitance to 1000 μF CAT III 600V for increased safety Current Measurement to 10A AC/DC Frequency measurements from 10Hz to 50kHz Resistance range from 600 ohm to 40 Mohm Rugged over-molding increases durability and user grip True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC /DC volts (1) Digital Multimeter with Test Leads; (2) AA Batteries Mfg #2216-20

• Can Determine A Voltage Range Up To 600-Volt Ac/dc
• Device alerts both audibly and visually when voltage is present
• Includes an easy-to-read back lit display
• Auto Range to mV

Milwaukee Voltage Analog Detector Easy To Use Design With Green Power-On Indicator Loud beeper and red light indicates voltage for safety Use for residential and industrial applications up to 1000-volts Blinking red light indicates voltage CAT IV 1000V for highest safety rating Green light indicates tool is on Loud beeper indicates voltage On/Off button Pocket clip for easy storage Tip for checking outlets Wide 50 - 1000 AC voltage range (1) Voltage Detector (2200-20); (1) AAA Batteries Mfg #2200-20

• Easy To Use Design With Green Power-On Indicator
• Loud beeper and red light indicates voltage for safety
• Use for residential and industrial applications up to 1000-volts
• Blinking red light indicates voltage

Milwaukee Compact Wire Stripper & Cutter With Comfort Grip, 10-24 AWG Cleanly & Accurately Strips 10-22 Solid & 12-24 Standard Awg Wire Blade's curved design lets it to cleanly cut through copper wires Smooth Cuts - Curved Cut Edge Clean, Accurate Stripping Clean Strips, Precise Wire Fit Easy Storage, Compact Size Strips 10-22 Solid & 12-24 Stranded AWG wire Easy Access Swing Lock High-Contrast Markings Loop Holes Limited Lifetime Warranty (1) Comfort Compact Wire Stripper Mfg #48-22-3044

• Cleanly & Accurately Strips 10-22 Solid & 12-24 Standard Awg Wire
• Blade's curved design lets it to cleanly cut through copper wires
• Smooth Cuts - Curved Cut Edge
• Clean, Accurate Stripping

The Milwaukee 2217-20 Digital Multimeter offers a wide voltage range to 600-Volt AC/DC and measures frequencies from 10Hz to 50kHz. The heavy-duty True-RMS meter offers accuracy and durability with an easy-to-read white on black display and an over-molded dial for 1-handed use. A slide rail system provides space for adding proprietary accessories.

• Voltage range to 600-Volt AC/DC
• Frequency measurements from 10 Hz to 50 kHz
• Contact temperature measurement from -40 degree F to 752 degree F
• Current measurement to 10 Amp AC/DC
• True-RMS for accurate measurement in all applications
• High contrast white on black display with backlight for easy reading
• Auto ranging to milli-volt for accurate readings
• Lo-Z measurement to eliminate ghost voltage
• Rugged over-molding increases durability and user grip
• Slide rail system for adding proprietary accessories

The Klein Tools Self-Adjusting Wire Stripper / Cutter takes the guesswork out of stripping solid, stranded, and Romex wire. As the name suggests, this tool features a self-adjusting stripping head for quick, precise wire stripping. It's especially useful in panels and other places where multiple types and sizes of wire are present. Great for HVAC applications.

• Wire Stripper with stripping head that adjusts to strip: 10-20 AWG solid, 12-22 AWG stranded, and 12/2 and 14/2 Romex cable (all sizes) and other nonmetallic (type NM) sheathed cable
• Adjustable stopper to control the length of the core strip
• Tensioning thumb wheel allows for precise stripping of smaller gauge wire
• Convenient wire cutter in handle
• Grooved grips are designed for added comfort
• Perfect for HVAC applications because it allows you to strip the outer jacket of thermostat wire and then all the associated individual wires
• Romex is a registered trademark of Southwire Company

ATL55 Test Leads - CAT III UL Listed test leads are made for measuring up to 1,000-Volt. These fit into industry-standard multimeters with 4 mm input jacks. Include insulated alligator clips.

• CAT III
• UL listed
• Measures up to 1000-Volt
• Fits into industry-standard multimeters with 4 mm input jacks
• Includes insulated alligator clips
• Compatible with DL369, DL379, DL389, DL49B, DL419, DL429, DL49, DL99B, DL235, DM200 - discontinued, DM383B
• DM384, DM391, DM393, DM397, DMEG3, IRT3, UTL2K, UTL260, UTL33T, MCP9A, MCP4,

Milwaukee Non-Contact Voltage Detector With Laser Infrared Thermometer Detects Ac Voltage Between 12 - 1000v W/ Visual And Audible Indicators Temperature Range from -22Ëš to 482ËšF Backlit LCD Display for Clear Temperature Readings Quarter Turn Cap for Easy Battery Replacement Durable Belt Clips Allows for Easy Storage and Retrieval from Pocket CAT IV 1000V Safety Rating Powered by (2) AAA Batteries 2-Year Warranty (1) Non-Contact Voltage Detector w/ Laser Infrared Thermometer Mfg #2225-20

• Detects Ac Voltage Between 12 - 1000v W/ Visual And Audible Indicators
• Temperature Range from -22Ëš to 482ËšF
• Backlit LCD Display for Clear Temperature Readings
• Quarter Turn Cap for Easy Battery Replacement

Milwaukee Circuit Breaker Finder Accessory Kit For Use With The Circuit Breaker Finder W/ Led This is compatible with all circuit breaker finders Alligator Clip Adapter locates the correct breaker For Use With 2222-20 Circuit Breaker Finder w/ LED Alligator Clip Adapter Locates the Correct Breaker of Exposed Hot and Neutral Wires Light Socket Adapter Finds the Correct Breaker When Plugged into a Light Bulb Socket Includes Standard 3-Prong to 2-Prong Grounding Adapter (1) Alligator Clip Adapter, (1) Light Socket Adapter, (1) 3-Prong to 2-Prong Grounding Adapter Mfg #49-77-1006

• For Use With The Circuit Breaker Finder W/ Led
• This is compatible with all circuit breaker finders
• Alligator Clip Adapter locates the correct breaker
• For Use With 2222-20 Circuit Breaker Finder w/ LED

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries. Equipped with 1-year warranty along with a tri-lingual instruction manual. Zero ohms adjustment dial.

• Manual range selection
• Easy to read, color-coded analog displays
• Includes replaceable test leads and operating instructions
• Agency approved with fuse overload protection circuitry incorporated
• 13-position rotary dial
• Tests: voltage range 300 VAC/DC, current range 250 mAdc
• Replaceable test leads
• Decibels (on AC voltage ranges) -20 to +56dB
• Fuse 250 mA
• Accuracy 5%

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The Stop Shock II Circuit Analyzer makes it easy to test GFCI receptacles and determine the appropriate wiring correction needed. This GFCI tester uses advanced circuitry and a patent-pending proprietary design to precisely detect the required low resistance (less than 10ohms) on ground wire and provides a clear and easy-to understand single LED readout indication for correct wiring or Bad Ground, Open Neutral, Hot/GND Reverse, Hot/NEU Reverse and Open Hot wiring errors without the need to memorize or decipher a dual-indication chart. The Stop receptacles require GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Designed for the jobsite this tester features Hi-impact ABS housing with a 250 lb. crush rating and the ability to withstand drops of up to 10 ft. Backed by a lifetime warranty this tool will speed up the testing process and increase your productivity for years to come.

• Bright 360 degree viewable LED indicator light
• Single LED provides immediate indication of the wiring error, no need for a chart to carry, memorize or interpret
• Advanced ground testing circuitry precisely detects the required low resistance values
• Hi-impact ABS housing withstands a 10 ft. drop and offers a 250 lbs. crush rating
• Limited lifetime warranty

• 150PSI
• Suitable For Use with Schedule 40 Pipe and Pipe Nipples
• 90° bend angle ensures smooth flow
• Pressure rated at 150 PSI to deliver reliable performance
• Threaded to ensure a secure, leak-free fit
• Compatible with schedule 40 pipe and pipe nipples

Milwaukee Circuit Breaker Finder With LED All-In-One Solution Stores The Transmitter Into The Receiver Over Molded Grip for Durability and Comfort Convenient, On-Board Storage for the Transmitter and Receiver LED Work Light to Easily Work in Dark Areas for More Visibility CAT II 135V Safety Rating Green Indicator Light Helps Identify the Correct Breaker Angled Tip on Receiver Provides Direction for Placement in a Breaker Box Powered by (1) 9V Alkaline Battery 2-Year Warranty (1) Circuit Breaker Finder Receiver, (1) Circuit Breaker Finder Transmitter Mfg #2222-20

• All-In-One Solution Stores The Transmitter Into The Receiver
• Over Molded Grip for Durability and Comfort
• Convenient, On-Board Storage for the Transmitter and Receiver
• LED Work Light to Easily Work in Dark Areas for More Visibility

Easily thread wires and cables with this Milwaukee 60 ft. Fiberglass Fish Stick Low/Mid/High Flex Combo Kit with Accessories. This kit features durable connections and the brightest glow. The knurled grip makes threading easy and the coating protects against splinters. Each stick is color-coded so you can quickly tell its flexibility level. This kit includes seven 5 ft. low-flex fish sticks, three 5 ft. mid-flex fish sticks, two 5 ft. high-flex fish sticks, a bullet nose tip, a hook tip, a whisk tip, a magnet and chain tip and a lighted tip.

• Reinforced connection points
• Brightest glow in the dark
• Knurled grip
• Protective anti-splinter coating
• Low, mid and high flexibility
• Color coded by flexibility
• 5 ft. individual stick
• Includes seven low, three mid and two high-flex sticks
• Includes bullet nose, hook, whisk, magnet and chain and lighted tips
• Includes storage bag
• Built-in pocket in storage bag
• Compatible with all Milwaukee fish sticks and fish stick accessories
• Includes: one 48-22-4156

The Milwaukee 100 ft. Polyester Fish Tape with Flexible Metal Leader features a low friction case providing you with a smooth payout and easy rewind. The triple strand design won't kink after repeated use and delivers a more durable tape. A low friction case provides users with a smooth payout and easy rewind. The fish tape features a multi-position handle allowing users to comfortably use the fish tape in any jobsite scenario.

• High flexibility polyester tape
• Triple strand design
• Low friction case
• 100 ft. L
• Flexible metal leader
• Multi-position handle
• Square inner grip
• Anti-catch tip
• Includes: 100 ft. polyester fish tape with flexible metal leader

The Milwaukee 10-piece Electricians Hole Saw Kit comes with 6-hole saw sizes, 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in. and 2-1/2 in. Features Rip Guard teeth that were built with more steel behind the cutting edge for added strength. These teeth give you increased productivity on the job site as well as better hole quality and are backed by a limited lifetime tooth break warranty. Each Hole Dozer is coated with a low friction, thermoset paint that provides faster cutting speed in wood and more holes cut per battery charge. The Hole Dozer comes with a Plug Jack, an all-access slot design that allows for full access during plug removal. The Plug Jack enables access lower into the cup for thick material and higher toward the teeth for thin material, eliminating wasted downtime between holes.

• Features rip guard teeth, teeth built with more steel behind the cutting edge for added durability
• Comes with a limited lifetime tooth break warranty
• Coated with a low friction, thermoset paint coating that provides faster cutting speed in wood and more holes cut per battery charge
• Equipped with plug jack, an all-access slot design for fast plug removal
• Features bi-metal construction with 8% cobalt for increased wear resistance
• Cuts through clean wood, nail embedded wood, plastic, aluminum, metal and stainless steel
• Includes 6 hole saw sizes, 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in. and 2-1/2 in., 2 arbors, 4 total pilot bits, hex key and case

The Cooper Bussmann Fuse Puller removes fuses from their holder. Constructed of heavy-duty nylon. Fuse puller to be used only when the associated circuit has been de-energized.

• Use to remove a fuse from a fuse block or other type of holder
• Heavy-duty nylon construction
• Compatible with fuse diameters between 13/32 in. - 13/16 in.
• Fuse puller is only to be used when the associated circuit has been de-energized

The Milwaukee 200 ft. Polyester Fish Tape with Flexible Metal Leader features a low friction case providing you with a smooth payout and easy rewind. The triple strand design won't kink after repeated use and delivers a more durable tape. A low friction case provides users with a smooth payout and easy rewind. The fish tape features a multi-position handle allowing users to comfortably use the fish tape in any jobsite scenario.

• High flexibility polyester tape
• Triple strand design
• Low friction case
• 200 ft. L
• Flexible metal leader
• Multi-position handle
• Square inner grip
• Anti-catch tip
• Includes: 200 ft. polyester fish tape with flexible metal leader

Milwaukee AC Digital Clamp Meter, 400 Amp Built-In Led Light Allows You To Work In Darker Areas Can determine a voltage range up to 600-volt AC/DC Includes an easy-to-read white on black display Measures up to 400 amps AC, Large 1.0” jaw opening Rugged over-molding increases durability and user grip Thin Jaw Profile for easier wire measurement in panels or in bundles True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC/DC volts (1) 400 Amp Clamp Meter; (2) AAA Batteries Mfg #2235-20

• Built-In Led Light Allows You To Work In Darker Areas
• Can determine a voltage range up to 600-volt AC/DC
• Includes an easy-to-read white on black display
• Measures up to 400 amps AC, Large 1.0” jaw opening

This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.

• This cutting, stripping, and crimping tool cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire with built-in, knife-type wire cutter
• Wire Stripper cleanly shears machine screws
• Measures machine screw sizes and gauges wire sizes
• Crimps insulated terminals and connectors
• Made in USA
• Plastic covered handles for comfort
• Crimps insulated terminals

Hand tools are a part of every tool box and with exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools set an industry standard and provide you with the superior performance you've come to expect for every job. Whether you need wire cutters, terminal crimpers, cable strippers or pliers - Gardner Bender has the perfect tool to complete your electrical tool set. Gardner Bender Circuit Alert voltage sensing wire strippers have built-in voltage detectors sensing AC voltage from 50-600 AC. Stainless steel body for maximum corrosion resistance. This wire stripper also cuts and rethreads bolts.

• Audible and visual alerts indicate the presence of voltage
• #10 - #18 AWG wire gauge
• Cuts and strips solid wire
• Ergonomic, cushioned handles for ultimate comfort and control
• Double bevel cutting blades for superior nick resistance
• Easy-to-read stamped and ink filled markings
• Dual gripping positions for traditional or forward hand positions
• Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32
• Wire looping holes form wire to fit on screw terminals
• Plier nose for gripping and pulling
• cULus listed tester
• Durable, drop resistant construction
• Wire gauge 10 - 18 AWG
• Length 7 in.

The Milwaukee Lineman's 4-in-1 Ratcheting Insulated Box Wrench is 1000V UL Classified. Durable forged steel construction provides users with longer tool life, The ratcheting wrench's ergonomic handle is designed to deliver users with comfortable use while wearing gloves and still allows for easy storage. High contrast size markings let users identify size easier. The box wrench features twelve point sockets that fit 1/2 in., 9/16 in., 5/8 in. and 3/4 in. hardware.

• 1000-Volt UL classified
• 2 separate metal heads
• Durable forged steel
• Large directional switches
• High contrast size markings
• Ergonomic handle
• Lanyard hole
• 1/2 in., 9/16 in., 5/8 in. and 3/4 in. 12-point sockets
• Includes: the Milwaukee Lineman's 4-in-1 insulated ratcheting box wrench

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both an audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

• Quickly and easily identify correct circuit breaker or fuse protecting a specific electrical circuit
• Designed for operation at 120-Volt AC, 50 to 60Hz
• Audible alert and bright LED visual indication
• Magnetic back attaches to electrical panels for inch hands-free inch operation
• When used with CS61200AS accessory kit, unit can trace switches, light fixtures, and other energized wiring
• Integrated lead and probe storage
• Receiver operates from one 9-Volt battery included
• Transmitter integrates into the body for convenient transportation and storage
• Transmitter doubles as a 3-wire circuit analyzer with GFCI test functionality
• Agency approval: UL

This 120-VAC Outlet Tester tests standard receptacles to ensure proper wiring. Neon light indicators give positive indication of circuit status. This compact unit plugs into any standard 3-wire/grounded receptacle (110 - 125 V AC circuits). It tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.

• Tests multiple conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring
• Succession of yellow and red lights provides indication of circuit status or specifies wiring errors
• Provides easy-to-read views from the top, side and bottom of tester
• Tests standard outlets and extension cords
• Tests: standard outlets, extension cords

Multi-function tool indicates voltage level, tests continuity and includes non-contact AC voltage detection. The Volt Check integrates many functions required for installations and trouble-shooting into one heavy-duty tool. This Smart Meter easily adjusts to the required application without the need to adjust any dials. The integrated Circuit Alert technology for non-contact AC voltage detection uses the only button found on the test unit. Move from continuity testing to AC or DC voltage measurements without making a single adjustment. Magnets molded into the back of the unit allow for total lead control while testing. The versatility of this tester, combined with the 10 ft. drop rating and two hundred fifty pound crush rating, make it one of the most durable, accurate and safe electrical probes on the market today.

• Indicates AC/DC voltage, continuity, DC polarity and non-contact AC voltage presence
• Circuit alert non-contact AC voltage detection in tip (50-600V AC)
• Twin probes for 24-600V AC; 6-220V DC with polarity indication or continuity
• Smart meter technology automatically selects voltage or continuity test; no adjustment dials or range selection necessary
• Magnetic back attaches to electrical panels for hands-free operation
• Snap-in leads are spaced to fit a standard outlet for 1-hand operation
• 26 in. Sta-flex cold weather leads with strain reliefs
• Operates from (3) AAA batteries

The Milwaukee Clamp Meter for HVAC/R can measure up to 600 Amp AC and features a high-contrast white-on-black display with a backlight for easy readings. The 1-3/10 in. jaw opening can easily handle large conductors and has a thin jaw profile for accessing tight spaces. A built-in voltage detector offers further support.

• Measures up to 600 Amp AC
• Built-in voltage detector supports wide voltage range to 600 AC/DC volts
• High-contrast white-on-black display with backlight for easy reading
• True-RMS for accurate measurement in all applications
• Large 1-3/10 in. jaw opening with thin jaw profile for easy wire measurements in panels or bundles
• Thermocouple (dual banana) input for contact temperature measurement
• 600 UA DC for flame rectification
• Rugged over-molding helps provide durability and user grip
• Built-in LED work light helps illuminate work area

Milwaukee Dual Range Non-Contact Digital Voltage Detector, 10-1000 Volt Automatically Differentiates 10-49? & 50-1000? Auto-Off Blade-Tip for Checking Outlets Built-In LED Work Light Constant Power ON LED Indicator Different Colors Identify Voltage Range Pocket Clip (1) Multi-Voltage Detector Mfg #2203-20

• Automatically Differentiates 10-49? & 50-1000?
• Auto-Off
• Blade-Tip for Checking Outlets
• Built-In LED Work Light

Milwaukee Electrical Test Lead Set Cat Iii 1000v, Cat Iv 600v Rated For Ac/dc Measurement 55” length Maximum current of 10A (1) Electrical Test Lead Set Mfg #49-77-1001

• Cat Iii 1000v, Cat Iv 600v Rated For Ac/dc Measurement
• 55” length
• Maximum current of 10A​
• (1) Electrical Test Lead Set

Milwaukee AC/DC Digital Clamp Meter, 600 Amp Built-In Voltage Detector And Led Work Light CAT III 600V for increased safety Frequency Measurement High Contrast, White on Black Display with Backlight for easy reading Measures up to 600 amps AC/DC, Large 1.30” jaw opening Inline Design for Easy Maneuvering Thin Jaw Profile for easier wire measurement in panels or in bundles True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC/DC volts 5-Year Warranty (1) True RMS Clamp Meter; (1) Test Lead Set; (2) AA Batteries Mfg #2237-20

• Built-In Voltage Detector And Led Work Light
• CAT III 600V for increased safety
• Frequency Measurement
• High Contrast, White on Black Display with Backlight for easy reading

Get safe, comfortable cuts with these Milwaukee Electrician Snips. All-metal handles and comfortable grips ensure maximum leverage. The exclusive BOLT LOCK design features a wire gullet that prevents the blades from walking as you cut. An ergonomic grip provides ultimate comfort.

• Bolt Lock Technology - Blades won't come loose
• High Leverage Ergonomic Handles
• Wire Gullet prevents wires from walking
• All Metal Handles
• Forged Blades
• Serrated Teeth for non-slip cutting
• Electricians Snips

The ATTPC3 is a K-Type Pipe Clamp Probe (grip style) Thermocouple temperature probe. Compact and easy to use. Improved strain relief and comfort grip. Clamp style adapter for use with K-Type inputs.

• For use with k-type inputs
• Quick boiler and A/C line set temperature readings
• Thermo-couple temperature probe
• Fits 1/4 in. to 1-1/2 in. pipes
• Temperature range: minus 40 degree F to 250 degree F (minus 40 degree C to 121 degree C)

The Milwaukee Fork Meter Digital Multimeter is a heavy duty True-RMS electrical tester for professional residential, commercial and industrial applications. The multimeter measures current, temperature and voltage and features an easy-to-read white on black display with a backlight. The wide 63/100 in. jaw opening offers flexibility.

• Measures current, temperature and voltage and detects voltage for HVAC/R
• Measures up to 200 Amp and offers a wide voltage range to 1,000-Volt AC/DC
• High contrast white on black display with backlight for easy reading
• True-RMS for accurate measurement in all applications
• Thermocouple dual banana input for contact temperature measurement
• Wide 63/100 in. jaw opening
• 600 UA DC for flame rectification
• Built-in voltage detector and LED work light
• Rugged over-molding increases durability and user grip