The Milwaukee 2202-20 Voltage Detector with LED is used for residential, commercial and industrial applications. The 2202-20 can detect between 50 and 1000-Volt AC and has an industry leading safety rating of CAT IV 1000-Volt. With a built in bright LED work light; the 2202-20 is two tools in one. The durable tip allows for easy checking of power outlets. The 2202-20 is also designed with a green "Power On" indicator light so you know the voltage detector is working properly before use. Includes 2 AAA batteries.

• Non-contact voltage detection technology
• Extra-bright LED work light makes working in dark areas easy
• Category IV 1,000-Volt safety rating is safe for most applications and including industrial applications
• Rear push-button design is easy to use
• Green, power-on indicator light tells you the voltage detector is working properly before use
• Powered by 2 easy-to-replace AAA batteries (included)
• Pocket clip for easy storage and retrieval from your pocket

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

• GFCI Outlet Tester detects the most common wiring problems in standard and GFCI receptacles
• Electrical outlet tester works on GFCI outlets and confirms operation of the ground fault protective device
• Built to withstand a 6.6 ft. (2 m) drop
• Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
• Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

The Klein Tools Crimping and Cutting Tool crimps both insulated and non-insulated 10-22 AWG terminals and connectors. The tapered nose which is great when working in tight spaces. The wire cutter in the nose specially hardened for long life.

• Crimper crimps 10 to 22 AWG insulated and non-insulated terminals
• Cutting and Crimping Tool has specially hardened wire cutter in nose
• Tapered nose design for working in confined spaces
• Crimping die marked for insulated and non-insulated solderless terminals and connectors
• Made in USA
• Plastic-dipped, cushioned handles for comfort

The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.

• Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
• Detects voltage with simultaneous visual and audible voltage indicators
• Bright flashlight illuminates work area and may be used independent of voltage detection function
• Green light indicates no voltage
• Lightweight, compact tool with pocket clip provides convenient storage and quick access
• Auto power-off feature conserves and extends battery life
• CAT IV 1000V rating provides expanded operation and protection
• Screw-thread battery cap with O-ring ensures protection against dust and water ingress
• 6.6 ft. (2 m) drop protection
• IP67: Dustproof and waterproof
• Conforms to CE requirements
• US Patent 10,073,142, D750,985 and other patents pending

This compact, lightweight wire stripper and cutter cleanly cuts solid and stranded copper wire. Strong-gripping serrated nose for easy bending, shaping, and pulling of wire. Handles are double-dipped for comfortable grip. Curved handles help reach into confined areas.

• Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 screws
• Precision ground stripping holes
• Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
• Holes for looping and bending wire
• Made in USA
• Shear-type cutting blades for clean cuts
• Double-dipped comfort grips with curved handles
• Coil spring provides fast self-opening action
• Easy-to-read markings
• Handy closure lock for convenient storage
• Made in USA

Get perfect wire stripping with the Milwaukee Fixed Blade Hawkbill Knife. Designed to stay sharper longer than most other knives, a full metal tang provides durability for tough cuts. The large handle lets you work comfortably even with gloves. A molded sheath provides easy carrying and storage.

• Ideal for dripping cable
• Stays sharper longer
• Durable sheath included
• Stainless steel blade
• 8.5 in. overall length
• Large handle optimized for use with gloves
• Full tang design

Milwaukee 6 in 1 Combination Pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe, and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation, and won't open when stored in a pouch or backpack. Milwaukee 6 in 1 Combination Pliers deliver maximum productivity for the trades. The Milwaukee 48-22-3079 is perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all combination pliers. The Milwaukee 48-22-3079 includes (1) 48-22-3079 Combination Plier.

• Reaming head design - smooths edges of metal pipe from 1/2 in. to 1 in.
• Bolt cutter - thread and cut #6 and # 8 bolts to preferred length
• Wire stripper - strips 8 AWG to 18 AWG (solid wire), 10 AWG to 20 AWG (stranded wire)
• 1-handed swing lock - easy 1-handed use and remains locked while in pouch, spring loaded for easy opening
• Curved cutting blade for clean cuts through larger wire sizes
• Rust protection - increases tool life by reducing corrosion
• Forged alloy steel - for maximum tool strength and durability
• Tether-ready handle loops

Milwaukee Digital GFCI Receptacle Tester Lcd Screen Offers Clear Reading Of Wiring Conditions, Voltage, And Trip Time Over Molded Grip for Durability and Comfort Verifies the Functionality of a Ground Fault Protective Device on GFCI Outlets LED Visual Indicators Identifies Wiring Conditions in Electrical Outlets CAT II 135V Safety Rating Built to Withstand a 6-Foot Drop Powered by (2) AAA batteries 2-Year Warranty (1) Digital GFCI Receptacle Tester Mfg #2224-20

• Lcd Screen Offers Clear Reading Of Wiring Conditions, Voltage, And Trip Time
• Over Molded Grip for Durability and Comfort
• Verifies the Functionality of a Ground Fault Protective Device on GFCI Outlets
• LED Visual Indicators Identifies Wiring Conditions in Electrical Outlets

This compact, lightweight wire-stripping and cutting tool is designed to cut 10 - 18 AWG solid wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places.

• Cuts, strips, loops and gauges 10-18 AWG solid wire
• Spring-loaded action for self-opening
• Easy-to-read wire gauge markings on both sides for stripping in either direction
• Hardened steel with precision ground stripping holes and wire looping and bending holes
• Made in USA
• Black-oxide finish resists corrosion
• Textured handles provide a firm, comfortable grip
• Color-coded handles: red indicates stranded wire, yellow indicates solid wire
• Shear-type cutting blades for clean cuts

The Gardner Bender GFCI Outlet Tester was ergonomically designed for today's electrical professional. This unit plugs into any standard 120-Volt outlet and indicates the wiring condition of the outlet. The GFI-3501 also has the ability to test any outlet protected by a ground fault receptacle to ensure proper interruption operation. With charts on both sides of the unit, any user can quickly identify which of the six wiring conditions is indicated by the integrated neon lamps. Test any GFCI outlet, standard outlet, or extension cord.

• Easy to use
• Tests for 7 conditions: ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring
• Tester trips GFCI between 6 - 9 ma
• Succession of yellow and red lights provides indication of circuit status or specifies wiring errors

Milwaukee 48-22-6109 Wire Strippers feature a swing-lock design for fast 1-handed operation and won't open when stored in a pouch or backpack. These pliers feature a curved blade design that allows for clean cuts through larger wire sizes and have the capability to cut #6 and #8 bolts. The pliers ergonomic handle form and lightweight design allows for maximum versatility and smooth wire stripping. The Milwaukee 48-22-6109 is perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all wire pliers. The Milwaukee 48-22-6109 includes one 48-22-6109 Wire Stripper.

• 1-handed swing lock, easy 1-handed use and remains locked while in pouch, spring loaded for easy opening
• Bolt cutter thread and cut #6 and # 8 bolts to preferred length
• Curved cutting blade for clean cuts through larger wire sizes
• Ergonomic handle form for increased comfort and better grip in the hand
• Rust protection increases tool life by reducing corrosion
• Light-weight design, for maximum versatility and smooth 1-handed use
• Limited lifetime warranty

Milwaukee Digital Multimeter Can Determine A Voltage Range Up To 600-Volt Ac/dc Device alerts both audibly and visually when voltage is present Includes an easy-to-read back lit display Auto Range to mV Capacitance to 1000 μF CAT III 600V for increased safety Current Measurement to 10A AC/DC Frequency measurements from 10Hz to 50kHz Resistance range from 600 ohm to 40 Mohm Rugged over-molding increases durability and user grip True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC /DC volts (1) Digital Multimeter with Test Leads; (2) AA Batteries Mfg #2216-20

• Can Determine A Voltage Range Up To 600-Volt Ac/dc
• Device alerts both audibly and visually when voltage is present
• Includes an easy-to-read back lit display
• Auto Range to mV

Milwaukee Multipurpose Pliers 3/4 Double Dipped Latex Microfinish For Water Resistance And Warmth Sandy Latex Finish For Grip Performance 7GA Inner Liner For Warmth 15 Gauge For Better Dexterity Breathable and Comfortable Glove Design Ideal Use For Demolition, Wire-Stripping, and Pipe Threading Applications Mfg #48-22-6579

• 3/4 Double Dipped Latex Microfinish For Water Resistance And Warmth
• Sandy Latex Finish For Grip Performance
• 7GA Inner Liner For Warmth
• 15 Gauge For Better Dexterity

This 120-VAC Outlet Tester tests standard receptacles to ensure proper wiring. Neon light indicators give positive indication of circuit status. This compact unit plugs into any standard 3-wire/grounded receptacle (110 - 125 V AC circuits). It tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.

• Tests multiple conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring
• Succession of yellow and red lights provides indication of circuit status or specifies wiring errors
• Provides easy-to-read views from the top, side and bottom of tester
• Tests standard outlets and extension cords
• Tests: standard outlets, extension cords

ATL55 Test Leads - CAT III UL Listed test leads are made for measuring up to 1,000-Volt. These fit into industry-standard multimeters with 4 mm input jacks. Include insulated alligator clips.

• CAT III
• UL listed
• Measures up to 1000-Volt
• Fits into industry-standard multimeters with 4 mm input jacks
• Includes insulated alligator clips
• Compatible with DL369, DL379, DL389, DL49B, DL419, DL429, DL49, DL99B, DL235, DM200 - discontinued, DM383B
• DM384, DM391, DM393, DM397, DMEG3, IRT3, UTL2K, UTL260, UTL33T, MCP9A, MCP4,

Get safe, comfortable cuts with these Milwaukee Electrician Snips. All-metal handles and comfortable grips ensure maximum leverage. The exclusive BOLT LOCK design features a wire gullet that prevents the blades from walking as you cut. An ergonomic grip provides ultimate comfort.

• Bolt Lock Technology - Blades won't come loose
• High Leverage Ergonomic Handles
• Wire Gullet prevents wires from walking
• All Metal Handles
• Forged Blades
• Serrated Teeth for non-slip cutting
• Electricians Snips

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both an audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

• Quickly and easily identify correct circuit breaker or fuse protecting a specific electrical circuit
• Designed for operation at 120-Volt AC, 50 to 60Hz
• Audible alert and bright LED visual indication
• Magnetic back attaches to electrical panels for inch hands-free inch operation
• When used with CS61200AS accessory kit, unit can trace switches, light fixtures, and other energized wiring
• Integrated lead and probe storage
• Receiver operates from one 9-Volt battery included
• Transmitter integrates into the body for convenient transportation and storage
• Transmitter doubles as a 3-wire circuit analyzer with GFCI test functionality
• Agency approval: UL

Milwaukee Circuit Breaker Finder With LED All-In-One Solution Stores The Transmitter Into The Receiver Over Molded Grip for Durability and Comfort Convenient, On-Board Storage for the Transmitter and Receiver LED Work Light to Easily Work in Dark Areas for More Visibility CAT II 135V Safety Rating Green Indicator Light Helps Identify the Correct Breaker Angled Tip on Receiver Provides Direction for Placement in a Breaker Box Powered by (1) 9V Alkaline Battery 2-Year Warranty (1) Circuit Breaker Finder Receiver, (1) Circuit Breaker Finder Transmitter Mfg #2222-20

• All-In-One Solution Stores The Transmitter Into The Receiver
• Over Molded Grip for Durability and Comfort
• Convenient, On-Board Storage for the Transmitter and Receiver
• LED Work Light to Easily Work in Dark Areas for More Visibility

Milwaukee Dual Range Non-Contact Digital Voltage Detector, 10-1000 Volt Automatically Differentiates 10-49? & 50-1000? Auto-Off Blade-Tip for Checking Outlets Built-In LED Work Light Constant Power ON LED Indicator Different Colors Identify Voltage Range Pocket Clip (1) Multi-Voltage Detector Mfg #2203-20

• Automatically Differentiates 10-49? & 50-1000?
• Auto-Off
• Blade-Tip for Checking Outlets
• Built-In LED Work Light

Hand tools are a part of every toolbox. With exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools offer superior performance on every job. These pliers can be used to strip solid or stranded wire and feature a locking mechanism and spring return.

• Cut and strip copper or aluminum 10-20 AWG solid and stranded wire
• Built-in locking mechanism
• Holes in the side of jaws are intended for looping solid wire
• Spring return
• Use pliers to tighten or loosen small nuts
• Comfortable high-leverage handle
• 6.5 in. in length
• Comfortable high-leverage handles
• Wire gauge #10 - #20 AWG
• Length 6-1/4 in.

This Wire Stripper Long-Nose Multi Tool cuts and strips 10-20 AWG solid and 12-22 AWG stranded wire as well as crimps insulated and non-insulated connectors. The tip is designed to grab, pull and bend wires. It is optimized for ideal leverage when cutting and crimping. Precision shear-type blades make cutting easier.

• Wire Stripper strips 10-20 AWG solid, 12-22 AWG stranded wire
• Multi Tool crimps insulated and non-insulated connectors
• Tip designed to grab, pull and bend the smallest of wires
• Reinforced head reduces flex; optimized for ideal leverage when stripping and crimping
• Made in USA
• Precision shear-type cutting blades for easier cutting
• Do not use to cut steel wire
• Patent US D827,403

This 12-600 VAC Adjustable Circuit non-contact Voltage Tester features on/off adjustable sensitivity that detects the presence of AC Voltage from 12-Volt - 600-Volt without contacting wires. It includes an audible sensor and flashing visual sensor to indicate voltage. A built-in safe test feature assures batteries are operating properly. Operates from 2-LR44 1.5-Volt batteries (included). Applications include testing doorbells, low voltage lighting, outlets, switches, electrical panels and light fixtures.

• Visual (flashing) and audible (beeping) voltage indicators
• Non-contact testing
• Convenient pocket clip for easy accessibility
• 2 batteries included
• Operates from 2-LR44 1.5-Volt batteries (included)
• Tests: doorbells, low voltage lighting, outlets, switches, electrical panels, light fixtures

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The GVD-3504 tester from Gardner Bender indicates the presence of AC Voltage from 50-Volt - 600-Volt with visual (flashing) and audible (beeping) indicators.

• Built-in safe test feature assures batteries are operating properly
• Compact design fits in shirt pocket
• Operates from 1-AAA battery
• Tests outlets, switches, circuit breaker panels, wiring, light fixtures
• Operates from one "AAA" battery (included)
• Patented
• Tests: outlets, switches, circuit breaker panels, wiring, light fixtures

This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.

• This cutting, stripping, and crimping tool cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire with built-in, knife-type wire cutter
• Wire Stripper cleanly shears machine screws
• Measures machine screw sizes and gauges wire sizes
• Crimps insulated terminals and connectors
• Made in USA
• Plastic covered handles for comfort
• Crimps insulated terminals