The Channellock 12 in. Straight Jaw Tongue and Groove Pliers are constructed with high-carbon C1080 steel. The tool is fashioned with laser heat-treated teeth that clamp down perpendicularly for strong, nonslip jaw action. Undercut tongue-and-groove fabrication allows this heavy-duty tool to perform without slipping, giving users the confidence to impart maximum torque and leverage aided by the comfort and command of the ubiquitous CHANNELLOCK BLUE grips. The patented PermaLock fastener eliminates bolt and nut failure in any of the 7 adjustable jaw settings, supplying utmost strength to loosen and tighten threaded hardware up to 2-1/4 in. in addition to other fastening and crimping tasks.

• Jaw size adjustable among 7 settings with a maximum capacity of 2-1/4 in.
• Right-angle, laser heat-treated teeth grip in all directions for maximum bite
• Constructed with high-carbon C1080 steel for dependable performance on the job
• Rust-resistant coating inhibits corrosion for lasting use
• UNDERCUT tongue and groove won't slip
• CHANNELLOCK BLUE grips for added comfort and reduced hand fatigue

CHANNELLOCK Straight Jaw Tongue and Groove Pliers are built to last. With a PERMALOCK Fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser hardened teeth to provide a better, longer lasting grip. CHANNELLOCK Straight Jaw Tongue and Groove Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.

• Jaw size adjustable among 7 settings with a maximum capacity of 3.75 in.
• Right-angle, laser heat-treated teeth grip in all directions for maximum bite
• Constructed with high-carbon C1080 steel for dependable performance on the job
• Rust-resistant coating inhibits corrosion for lasting use
• UNDERCUT tongue and groove won't slip
• CHANNELLOCK BLUE grips for added comfort and reduced hand fatigue

The Channellock 10 in. Straight Jaw Tongue and Groove Pliers are constructed with high-carbon steel and fashioned with laser heat-treated teeth for strong, nonslip jaw action. Undercut tongue-and-groove fabrication allows this heavy-duty tool to perform without slipping, providing maximum torque and leverage aided by the comfort of Channellock BLUE grips. The patented PermaLock fastener eliminates bolt and nut failure in any of the seven adjustable jaw settings, supplying strength to loosen and tighten threaded hardware up to 2 in.

• Right angle, laser heat-treated teeth grip better and last longer
• Undercut tongue and groove design won't slip
• PermaLock fastener eliminates nut and bolt failure
• Patented reinforcing edge minimizes stress breakage
• UNDERCUT tongue & groove won't slip
• CHANNELLOCK BLUE grips for added comfort and reduced hand fatigue
• Made in the USA

CHANNELLOCK Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

• Original straight jaw tongue and groove pliers provide a strong, versatile grip for use in both directions
• RELIABLE PERMALOCK fastener eliminates nut and bolt failure with increased joint strength
• Strong 90°, laser-hardened teeth for superior grip and longevity
• Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
• UNDERCUT tongue & groove won't slip
• CHANNELLOCK BLUE grips for comfort
• Made in the USA
• 6.5 in. tongue and groove
• Straight jaw

The Milwaukee 6 in. and 10 in. Ream and Punch Straight Jaw Pliers incorporate exposed metal handles (patent pending) and a precision ground pliers head for reaming pipe and punching electrical knock outs. The pliers teeth are hardened for secure grip over the life of the tool. Milwaukee pliers feature slim profile over-molded comfort grips, which will not peel under jobsite conditions. All Milwaukee pliers are forged for strength and feature rust protection for long life.

• Reaming handles and head up to 1-1/2 in.
• Exposed metal handles for punching
• Comfort grips will not peel or dig into hands during extended use
• Jaw capacity up to 1 in. pipe and up to 2 in. pipe
• Rust resistant
• Forged strength design
• Limited lifetime warranty

CHANNELLOCK 442 12" Tongue & Groove Pliers feature a unique v-jaw design that creates more points of contact on round stock and tubing. These pliers are built to last with a PERMALOCK fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK V-JAW Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

• V-JAWS for more points of contact on round stock and tubing
• RELIABLE PERMALOCK fastener eliminates nut and bolt failure with increased joint strength
• STRONG 90-degree, laser-hardened teeth for superior grip and longevity
• FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
• UNDERCUT tongue and groove will not slip
• CHANNELLOCK BLUE grips for comfort
• 100% MADE IN USA

CHANNELLOCK Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

• Original straight Jaw tongue and groove pliers provide a strong, versatile grip for use in both directions
• RELIABLE PERMALOCK fastener eliminates nut and bolt failure with increased joint strength
• Strong 90-degree, laser-hardened teeth for superior grip and longevity
• Forged high-carbon U.S. steel is specially coated for ultimate rust prevention
• UNDERCUT tongue & groove won ft.t slip
• CHANNELLOCK BLUE grips for added comfort and reduced hand fatigue
• 100% MADE IN USA

The MILWAUKEE 10 in. Ream and Punch Straight Jaw Pliers incorporate exposed metal handles and a precision ground pliers head allowing users to easily ream pipe and punch electrical knockouts. The straight jaw pliers' teeth are hardened giving users a secure grip over the life of the tool. The ream and punch pliers feature slim profile over-molded comfort grips which will not peel after users use them heavily on the jobsite. All Milwaukee pliers are forged for strength and feature rust protection giving the user's tools long life.

• Precision-ground head and ream and punch exposed handles deliver powerful grip strength
• Hardened teeth increase the lifespan of Milwaukee 10 in. straight-jaw pliers and allow for strong gripping
• Molded comfort grip handles resist peeling, so you can trust them in challenging conditions
• 2 in. round pipe capacity offers greater versatility
• Forged design provides greater strength
• Rust-resistant finish improves the tool's lifespan and effectiveness

The Husky Groove Joint Pliers Set includes one 10 in. and one 12 in. model. Also known as tongue and groove pliers, they are great for gripping irregularly shaped objects. They also work well for clamping materials and are commonly used for turning and holding nuts and bolts. An advantage to this design is that it can adjust to a number of sizes without the distance in the handle growing wider. These pliers offer long handles for increased leverage, with a comfort grip design so you can count on a safe, non-slip hold.

• Smoothly adjusts between jaw positions
• Heat-treated design for increased durability
• Comfort grip handles ensure non-slip usage
• Precision cut teeth provide extra gripping power
• Low-profile joint rivet for longer life
• Husky style design
• Must have for any tool box

The Milwaukee 10 in. Hex-Jaw Pliers feature an aggressive V-Jaw geometry giving users the best fit and strongest hold on hexagonal bolts. An all-metal quick adjust mechanism allows users to achieve precise fits on hex bolts. The hex jaw pliers incorporate exposed metal handles for reaming pipe and punching as well as comfort grips, which will not peel or dig into the user's hands during extended use on the jobsite. The slim-design head gives users great access in tight applications such as electrical boxes.

• Hex jaw design for best fit on hex bolts
• All-metal adjustment mechanism
• Reaming handles and head up to 1-1/2 in.
• Exposed metal handles for punching
• Slim head design for tight access
• Comfort grips will not peel or dig into hands during extended use
• Adjustment positions 22
• Jaw capacity up to 2 in. hex bolt
• Rust resistant
• Forged strength design

Klein Tools Lineman's Thread Holding Plier 9" are made of the finest U.S. steel alloy. They are forged, precision machined, hardened and carefully tempered for maximum strength. Klein pliers provide exceptional performance and durability. Mfg #D20009NETH

• Pkg of 1
• Handle Material: Plastic Over Stainless Steel
• Handle Color: Blue
• Application: Cuts Acsr, Screws, Nails And Most Hardened Wire

Klein Tools Lineman's Bolt Thread Holding Plier 9". Holds And Cleans 5/8-Inch Pole Line Hardware. High-Leverage Design Has 46-Percent More Cutting Power. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Streamlined Design With Rounded Nose And Sure-Gripping, Cross-Hatched Knurled Jaw. Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Custom, Us-Made Tool Steel. Mfg #D2139NETH

• Holds And Cleans 5/8-Inch Pole Line Hardware
• High-Leverage Design Has 46-Percent More Cutting Power
• Induction Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Rebar Work Diagonal Cutting Plier 9". Ironworkers' Pliers For Soft Annealed Rebar Tie Wire. Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire. Induction-Hardened Cutting Knives For Long Life. Plastic-Dipped Handles For Comfort And Ease Of Identification. Custom, Us-Made Tool Steel. Mfg #D2489ST

• Ironworkers' Pliers For Soft Annealed Rebar Tie Wire
• Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire
• Induction-Hardened Cutting Knives For Long Life
• Plastic-Dipped Handles For Comfort And Ease Of Identification

Klein Red Replacement Handle For 7" Pliers. Plastic For Slip-Resistant Grip And Comfort. Tenite-Plastic Grips For 7-Inch (178 Mm) Pliers Handles. To Install, Place Open End Of Grip In Hot Tap Water To Within One Inch Of Plugged End For Approximately One Minute. Drive Grip Onto Pliers Handle. Provide Comfort And Resist Slipping. Mfg #70

• Plastic For Slip-Resistant Grip And Comfort
• Tenite-Plastic Grips For 7-Inch (178 Mm) Pliers Handles
• To Install, Place Open End Of Grip In Hot Tap Water To Within One Inch Of Plugged End For Approximately One Minute. Drive Grip Onto Pliers Handle.
• Provide Comfort And Resist Slipping

Klein 10'' Quick-Adjust Klaw Pump Pliers. Unique Jaw Design Provides Multiple Points Of Contact For Maximum Torque. Push Button And Quick Ratchet Feature Allows For Fast And Easy Adjustment To Any Position. Compact, Narrow Design For Easy Work In Small Or Hard To Reach Spaces. Gripping Surface With More Specially Hardened Teeth For Reduced Wear And Positive Grip. Extended Grips For Added Comfort. Mfg #D50410B

• Unique Jaw Design Provides Multiple Points Of Contact For Maximum Torque
• Push Button And Quick Ratchet Feature Allows For Fast And Easy Adjustment To Any Position
• Compact, Narrow Design For Easy Work In Small Or Hard To Reach Spaces
• Gripping Surface With More Specially Hardened Teeth For Reduced Wear And Positive Grip

Klein Tools Insulated Long-Nose Cutting Plier 6". Individually Tested To Exceed The Iec 60900 And Astm F1505 Standards, For Insulated Tools, And Clearly Marked With The Official 1000-Volt Rating Symbol. Flame Retardant, Impact-Resistant, Bright Orange Outer Coating With Two Layers Of Insulation Provide Protection Against Electric Shock. Slim Head Design For Working In Confined Areas. Curved Handles Provide Greater Tool Control. Side-Cutting Knives At The Hinge. Knurled Jaws For Sure Wrapping And Looping. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Thick, Exceptionally Tough, High-Dielectric White Inner Coating Is Bonded To The Tool. Integral Guards Help Prevent Hand Contact With Conductive Parts. Induction Hardened Cutting Knives For Long Life. Forged Steel For Maximum Durability. Mfg #D2036INS

• Individually Tested To Exceed The Iec 60900 And Astm F1505 Standards, For Insulated Tools, And Clearly Marked With The Official 1000-Volt Rating Symbol
• Flame Retardant, Impact-Resistant, Bright Orange Outer Coating With Two Layers Of Insulation Provide Protection Against Electric Shock
• Slim Head Design For Working In Confined Areas
• Curved Handles Provide Greater Tool Control

Klein Tools Hybrid Pliers With Crimper, Fish Tape Puller And Wire Stripper. Multi-Purpose Hybrid Pliers Save Time And Lessen The Tool Count. Pliers strip 10-14 AWG solid and 12-16 stranded wire. Wide knurled head easily grabs and twists wires. Quickly and easily pulls 1/8-Inch or 1/4-Inch (3 or 6 mm) flat steel fish tape without damaging the tape. Made in USA. Crimps non-insulated connectors, lugs and terminals and features high-leverage design for increased cutting power. 6-32 and 8-32 bolt shearing. Full length, induction hardened cutting knives for hard wire. Dual-material Journeyman grips are more comfortable and last longer than other handles. Mfg #J2159CRTP

• Multi-Purpose Hybrid Pliers Save Time And Lessen The Tool Count
• Pliers strip 10-14 AWG solid and 12-16 stranded wire
• Wide knurled head easily grabs and twists wires
• Quickly and easily pulls 1/8-Inch or 1/4-Inch (3 or 6 mm) flat steel fish tape without damaging the tape

Klein Journeyman High-Leverage Side-Cutting Connector Crimp/Tape Pulling Pliers. Cuts Acsr, Screws, Nails And Most Hardened Wire. High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Built-In Crimper Works On Non-Insulated Connectors, Lugs And Terminals. Built-In Channel Pulls Steel Fish Tape Without Damaging The Tape. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Induction Hardened Cutting Knives For Long Life. Streamlined Design With Sure-Gripping, Cross-Hatched Knurled Jaws. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Custom, Us-Made Tool Steel. Dual-Material Journeyman Handles Provide A Better Grip Without Sacrificing Tool Strength And Durability. Hard, Black Material For Toughness And Durability. Soft Material On Outer Surface For Comfort And A Firm Grip. Color-Coded Yellow, Dark Blue, Red, Or Light Blue Handles Allow Quick Identification Of The Tool. Mfg #J20009NECRTP

• Cuts Acsr, Screws, Nails And Most Hardened Wire
• High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs
• Built-In Crimper Works On Non-Insulated Connectors, Lugs And Terminals
• Built-In Channel Pulls Steel Fish Tape Without Damaging The Tape

Klein Black Ironworker's Plier 9" With Slim Head And Plain Handle. Twists And Cuts Soft Annealed Rebar Tie Wire. Spring-Loaded Action For Self-Opening. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Handform. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Custom, Us-Made Tool Steel. Mfg #2017CST

• Twists And Cuts Soft Annealed Rebar Tie Wire
• Spring-Loaded Action For Self-Opening
• Induction Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Midget Slim Long-Nose Plier 4". Lightweight, Slim-Nose Pliers For Precision Work. Polished Inside Jaws With Radiused Edges To Prevent Nicking Of Wire During Delicate Assembly Work. Curved Handles Provide Greater Tool Control. Spring-Loaded For Self-Opening Action. Hot-Riveted Joint For Smooth Action And No Handle Wobble. Forged Steel For Maximum Durability. Mfg #D322412C

• Lightweight, Slim-Nose Pliers For Precision Work
• Polished Inside Jaws With Radiused Edges To Prevent Nicking Of Wire During Delicate Assembly Work
• Curved Handles Provide Greater Tool Control
• Spring-Loaded For Self-Opening Action

Klein Tools Slip-Joint Plier 8". Shear-Type Cutter For Precision Wire Cutting. Two Versatile Jaw Positions. Serrated Jaws Provide Sure-Gripping Power. Nickel-Chrome Plated For Long Life. Do Not Use To Cut Steel Or Acsr. Mfg #D5118

• Shear-Type Cutter For Precision Wire Cutting
• Two Versatile Jaw Positions
• Serrated Jaws Provide Sure-Gripping Power
• Nickel-Chrome Plated For Long Life

Klein Tools Connector Crimping Long-Nose Pliers. Crimps Ur/uy/ug Insulation Displacement Connectors (Idc)- Scotchlok Type Connectors. Cleanly Strips 23 Awg And 24 Awg Wire. Grooved Jaws For Wire Wrapping, Looping And Twisting. Hot Riveted Joint Ensures Smooth Action And No Handle Wobble. Induction Hardened Cutting Surface For Long Life. Yellow Plastic Grips Enhance Comfort, Visibility And Allow Quick Identification. Scotchlok Is A Registered Trademark Of 3m Corporation. Mfg #VDV026049

• Crimps Ur/uy/ug Insulation Displacement Connectors (Idc)- Scotchlok Type Connectors
• Cleanly Strips 23 Awg And 24 Awg Wire
• Grooved Jaws For Wire Wrapping, Looping And Twisting
• Hot Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Long-Nose Cutting Plier 6" With Spring. Induction-Hardened Cutting Knives For Long Life. Knurled Jaws For Sure Wrapping And Looping. Spring-Loaded Action For Self-Opening. Slim Head Design For Working In Confined Areas. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Curved Handles Provide Greater Tool Control. Plastic-Dipped Handles For Comfort And Ease Of Identification. Custom, Us-Made Tool Steel. Mfg #D2036C

• Induction-Hardened Cutting Knives For Long Life
• Knurled Jaws For Sure Wrapping And Looping
• Spring-Loaded Action For Self-Opening
• Slim Head Design For Working In Confined Areas

Klein Hi-Vis Diagonal-Cutting High-Leverage Pliers. Diagonal Cutters With Glow In The Dark Grips To Easily Locate Your Tool In Dark Or Low Lit Areas. Plier Grips Charge In Natural And Artificial Lighting. Cuts Acsr, Screws, Nails, And Most Hardened Wire. High-Leverage Design. Rivet Is Closer To The Cutting Edge For 36-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire, Nails, And Most Hardened Wire. Note: Glow Time And Intensity May Vary If Charged In Low Light. Clean Grips Regularly To Maintain Glow Brightness. Mfg #D200028GLW

• Diagonal Cutters With Glow In The Dark Grips To Easily Locate Your Tool In Dark Or Low Lit Areas
• Plier Grips Charge In Natural And Artificial Lighting
• Cuts Acsr, Screws, Nails, And Most Hardened Wire
• High-Leverage Design. Rivet Is Closer To The Cutting Edge For 36-Percent Greater Cutting And Gripping Power Than Other Plier Designs

Klein Tools Diagonal Cutting Plier 5" With Tapered Nose. Diagonal Cutters Have Tapered Nose For Working In Confined Areas And Close Tip Cutting. Pliers' Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire. Induction-Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Plastic-Dipped Handles For Comfort And Ease Of Identification. Custom, Us-Made Tool Steel Is Forged For Maximum Durability. Mfg #D2455

• Diagonal Cutters Have Tapered Nose For Working In Confined Areas And Close Tip Cutting
• Pliers' Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire
• Induction-Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools 8 Inch Side Cutting Pliers Heavy Duty. Cuts Acsr, Screws, Nails And Most Hardened Wire. High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Streamlined Design With Sure-Gripping, Cross-Hatched Knurled Jaws. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Custom, Us-Made Tool Steel. Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Features Combination Polished And Black-Oxide Finish. Mfg #D20008

• Cuts Acsr, Screws, Nails And Most Hardened Wire
• High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs
• Induction Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Midget Curved Chain-Nose Plier 4.75". 60-Degree Bent Nose For Maximum Work Visibility In Confined Areas. Easily Bends And Forms Fine Wire. Polished Inside Jaws And Radiused Jaw Edges Prevent Nicking Wire. Spring-Loaded For Self-Opening Action. Curved Handles Provide Greater Tool Control. Hot-Riveted Joint For Smooth Action And No Wobble Handle. Made Of Forged Steel For Maximum Durability. Mfg #D320412C

• 60-Degree Bent Nose For Maximum Work Visibility In Confined Areas
• Easily Bends And Forms Fine Wire
• Polished Inside Jaws And Radiused Jaw Edges Prevent Nicking Wire
• Spring-Loaded For Self-Opening Action

Klein 8'' Journeyman High-Leverage Diagonal-Cutting Heavy-Duty Pliers. Diagonal Cutting Pliers Cut Acsr, Screws, Nails, And Most Hardened Wires. High-Leverage Pliers With Rivet Closer To The Cutting Edge For 36-Percent Greater Cutting Power Than Other Plier Designs. Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire. Induction-Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Dual-Material Journeyman Handles Provide A Better Grip Without Sacrificing Tool Strength And Durability. Hard, Black Material For Toughness And Durability. Soft Material On Outer Surface For Comfort And A Firm Grip. Color-Coded Handles Allow Quick Identification Of Tool. Custom, Us-Made Tool Steel. Mfg #J200028

• Diagonal Cutting Pliers Cut Acsr, Screws, Nails, And Most Hardened Wires
• High-Leverage Pliers With Rivet Closer To The Cutting Edge For 36-Percent Greater Cutting Power Than Other Plier Designs
• Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire
• Induction-Hardened Cutting Knives For Long Life

Klein 8'' High-Leverage Diagonal-Cutting Angled Head Pliers. Diagonal Cutters With Angled Head Design For Easy Work In Confined Spaces. High-Leverage Pliers With Rivet Closer To The Cutting Edge For 36-Percent Greater Cutting Power Than Other Plier Designs. Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire. Induction-Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Plastic-Dipped Handles For Comfort And Ease Of Identification. Custom, Us-Made Tool Steel. Mfg #D2488

• Diagonal Cutters With Angled Head Design For Easy Work In Confined Spaces
• High-Leverage Pliers With Rivet Closer To The Cutting Edge For 36-Percent Greater Cutting Power Than Other Plier Designs
• Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire
• Induction-Hardened Cutting Knives For Long Life

Klein Klein-koat Red Tentie Pliers Handle. Provide Slip-Resistant Grip And Comfort. Tenite-Plastic Grips For 6-Inch (152 Mm) Pliers Handles. To Install, Place Open End Of Grip In Hot Tap Water To Within One Inch Of Plugged End For Approximately One Minute. Drive Grip Onto Pliers Handle. Provide Comfort And Resist Slipping. Mfg #60

• Provide Slip-Resistant Grip And Comfort
• Tenite-Plastic Grips For 6-Inch (152 Mm) Pliers Handles
• To Install, Place Open End Of Grip In Hot Tap Water To Within One Inch Of Plugged End For Approximately One Minute. Drive Grip Onto Pliers Handle.
• Provide Comfort And Resist Slipping

Klein Universal Side Cutting Crimping Pliers 8". Crimping Die Behind Hinge For Superior Leverage Crimping Of Non-Insulated Connectors, Lugs And Terminals. Toothed Pipe Grip For Greater Gripping Power. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Custom, Us-Made Tool Steel. Mfg #12098

• Crimping Die Behind Hinge For Superior Leverage Crimping Of Non-Insulated Connectors, Lugs And Terminals
• Toothed Pipe Grip For Greater Gripping Power
• Induction Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Journeyman Yellow/Black Pump Plier 10". Quick-Adjust Rivet Allows One-Handed Fast, Easy Adjustment Of Plier Jaws. Smoothly Adjusts Between Six Machined Tongue And Groove Jaw Positions. Secure Tongue And Groove Design For Non-Slip Grip - Even With Heavy Pressure. Wide Range Of Versatile Jaw Positions. Tension-Loaded Joint To Reduce Handle Wobble For Sure Gripping. Dual Material Journeyman Handles For Added Comfort And Durability. Mfg #J50210

• Quick-Adjust Rivet Allows One-Handed Fast, Easy Adjustment Of Plier Jaws
• Smoothly Adjusts Between Six Machined Tongue And Groove Jaw Positions
• Secure Tongue And Groove Design For Non-Slip Grip - Even With Heavy Pressure
• Wide Range Of Versatile Jaw Positions

Klein Hi-Vis High-Leverage Side-Cutting Pliers. Glow In The Dark Grips To Easily Locate Your Tool In Dark Or Low Lit Areas. Grips Charge In Natural And Artificial Lighting. Cuts Acsr, Screws, Nails, And Most Hardened Wire. High-Leverage Design; Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Sure-Gripping Cross-Hatched Knurled Jaws. Note: Glow Time And Intensity May Vary If Charged In Low Light. Clean Grips Regularly To Maintain Glow Brightness. Mfg #D20009NEGLW

• Glow In The Dark Grips To Easily Locate Your Tool In Dark Or Low Lit Areas
• Grips Charge In Natural And Artificial Lighting
• Cuts Acsr, Screws, Nails, And Most Hardened Wire
• High-Leverage Design; Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs

Klein Tools Slip-Joint Plier 6". Shear-Type Cutter For Precision Wire Cutting. Two Versatile Jaw Positions For A Wider Range Of Openings. Serrated Jaws Provide Sure-Gripping Power. Nickel-Chrome Plated For Long Life. Plastic Dipped Handles For More Comfortable Grip. Do Not Use To Cut Steel Or Acsr. Mfg #D5116

• Shear-Type Cutter For Precision Wire Cutting
• Two Versatile Jaw Positions For A Wider Range Of Openings
• Serrated Jaws Provide Sure-Gripping Power
• Nickel-Chrome Plated For Long Life

Klein Blue Ironworker's Plier 9" With Spring. Made In The Usa. Twists And Cuts Soft Annealed Rebar Tie Wire. Induction Hardened Cutting Knives For Long Life. Heavy-Duty Knurled Jaws. Spring-Loaded Action For Self-Opening. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Hook Bend Handle. Precision-Hardened Plier Head For On-The-Job Toughness. Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Mfg #D2017CST

• Made In The Usa
• Twists And Cuts Soft Annealed Rebar Tie Wire
• Induction Hardened Cutting Knives For Long Life
• Heavy-Duty Knurled Jaws

Klein Tools Tapered Nose Diagonal Cutting Plier 7". Diagonal Cutters Have Heavy-Duty Tapered Nose Design. Pliers With 1-Inch Jaws Easily Reach Into Confined Spaces. Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire. Induction-Hardened, Standard Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Handform. Custom, Us-Made Tool Steel. Mfg #D2207

• Diagonal Cutters Have Heavy-Duty Tapered Nose Design
• Pliers With 1-Inch Jaws Easily Reach Into Confined Spaces
• Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire
• Induction-Hardened, Standard Cutting Knives For Long Life

Falling objects is a common safety issue in the workplace. Even a small object falling from a height can cause serious injury or damage. These Ironworker's pliers feature a split ring for tethering pliers while working at height. All of the features of Klein pliers plus the added safety of a tether ring. The high-leverage design provides greater cutting and gripping power. Protect yourself, your equipment and others on the job site with Klein's high-leverage ironworker's pliers with tether ring.

• Ironworker's Pliers twist and cut soft annealed rebar tie wire
• Includes split ring for tethering plier while working at height
• High-leverage design for greater cutting and gripping power
• Hook bend handle and heavy duty knurled jaws
• Made in USA
• Spring-loaded action for self opening
• Heavy duty knurled jaws
• Unique handle tempering helps absorb the ''snap'' when cutting wire
• Hot riveted joint ensures smooth action and no handle wobble
• Plastic dipped handles for comfort and ease of identification
• ''Handform'' handles for full gripping and cutting power
• Tether not included

Klein ToolsLong Nose Pliers, Slim Side Cut, 7 Inch. 1000 V Rated For Safety On The Job. Vde Certified. Unique Three-Part Insulation With White Underlayer Provides A Warning Sign That Insulation May Be Compromised. Side-Cutting Knives At Hinge. Induction Hardened Cutting Knives For Long Life. Multi-Color, Sleek Design With Small Thumbguards For Ease Of Handling And Easy Storage In Your Toolbelt. Extended Handles Provide Added Reach And Leverage. Hot-Riveted Joint For Smooth Action And No Handle Wobble. Durable, Molded Insulation Meets Or Exceeds Astm F1505 And Iec 60900 Standards For Insulated Tools. Mfg #2037EINS

• 1000 V Rated For Safety On The Job. Vde Certified
• Unique Three-Part Insulation With White Underlayer Provides A Warning Sign That Insulation May Be Compromised
• Side-Cutting Knives At Hinge
• Induction Hardened Cutting Knives For Long Life

Klein Tools Diagonal Cutting Pliers Slim Handle. 1000 V Rated For Safety On The Job. Vde Certified. Unique Three-Part Insulation With White Underlayer Provides A Warning Sign That Insulation May Be Compromised. Multi-Color, Sleek Design With Small Thumbguards For Ease Of Handling And Easy Storage In Your Toolbelt. Cuts Acsr, Screws, Nails And Most Hardened Wire. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint For Smooth Action And No Handle Wobble. Durable, Molded Insulation Meets Or Exceeds Astm F1505 And Iec 60900 Standards For Insulated Tools. Mfg #200028EINS

• 1000 V Rated For Safety On The Job. Vde Certified
• Unique Three-Part Insulation With White Underlayer Provides A Warning Sign That Insulation May Be Compromised
• Multi-Color, Sleek Design With Small Thumbguards For Ease Of Handling And Easy Storage In Your Toolbelt
• Cuts Acsr, Screws, Nails And Most Hardened Wire

Klein Tools Insulated Diagonal Cutting Plier 8". Pliers Grips Made Of Durable Molded Insulation Meet Or Exceed Astm F1505-16 And Iec 60900:2018 Standards For Insulated Tools. Clearly Marked With The Official 1000-Volt Rating Symbol. Flame Retardant, Impact-Resistant, Bright Orange Outer Coating With Two Layers Of Insulation Provide Protection Against Electric Shock. Heavy-Duty, Induction Hardened Cutting Knives Cut Acsr, Screws, Nails, And Most Hardened Wire. Thick, Exceptionally Tough, High-Dielectric White Inner Coating Is Bonded To The Tool. High-Leverage Design For 36-Percent Greater Cutting Power Than Other Plier Designs. Hot-Riveted Joint For Smooth Action And No Handle Wobble. Forged Steel For Maximum Durability. Mfg #D200028INS

• Pliers Grips Made Of Durable Molded Insulation Meet Or Exceed Astm F1505-16 And Iec 60900:2018 Standards For Insulated Tools
• Clearly Marked With The Official 1000-Volt Rating Symbol
• Flame Retardant, Impact-Resistant, Bright Orange Outer Coating With Two Layers Of Insulation Provide Protection Against Electric Shock
• Heavy-Duty, Induction Hardened Cutting Knives Cut Acsr, Screws, Nails, And Most Hardened Wire

Klein Tools Side Cutting Bolt Thread Holding Plier 9". Hinge Opening Holds And Cleans 5/8-Inch (16 Mm) Pole Line And Hardware Bolts Or Threaded Rods. High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Streamlined Design With Rounded Nose And Sure-Gripping, Cross-Hatched Knurled Jaw. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Heavy-Duty, Oversized Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Custom, Us-Made Tool Steel. Mfg #HD2139NETH

• Hinge Opening Holds And Cleans 5/8-Inch (16 Mm) Pole Line And Hardware Bolts Or Threaded Rods
• High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs
• Induction Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Pump Plier 12". Quick-Adjust Rivet Allows One-Handed Fast, Easy Adjustment Of Plier Jaws. Wide Range Of Versatile Jaw Positions. 2-3/8-Inch (60 Mm) Maximum Parallel Jaw Opening For A Range Of Applications. Smoothly Adjusts Between Six Machined Tongue And Groove Jaw Positions. Secure Tongue And Groove Design For Non-Slip Grip, Even With Heavy Pressure. Robust Teeth For Sure Gripping Action. Induction Hardened Jaws For Long Life. Mfg #D50212

• Quick-Adjust Rivet Allows One-Handed Fast, Easy Adjustment Of Plier Jaws
• Wide Range Of Versatile Jaw Positions
• 2-3/8-Inch (60 Mm) Maximum Parallel Jaw Opening For A Range Of Applications
• Smoothly Adjusts Between Six Machined Tongue And Groove Jaw Positions

Klein 9'' High-Leverage Side-Cutting Pliers. High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46% Greater Cutting And Gripping Power Than Other Plier Designs. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Induction Hardened Cutting Knives For Long Life. Streamlined Design With Sure-Gripping, Cross-Hatched Knurled Jaws. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Mfg #D2139NE

• High-Leverage Design. Rivet Is Closer To The Cutting Edge For 46% Greater Cutting And Gripping Power Than Other Plier Designs
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble
• Induction Hardened Cutting Knives For Long Life
• Streamlined Design With Sure-Gripping, Cross-Hatched Knurled Jaws

Klein Tools Heavy-Duty Insulated Diagonal Cutting Plier 8". Pliers Grips Made Of Durable Molded Insulation Meet Or Exceed Astm F1505-16 And Iec 60900:2018 Standards For Insulated Tools. Clearly Marked With The Official 1000-Volt Rating Symbol. Induction Hardened, Heavy-Duty Knives Cut Acsr, Screws, Nails, And Most Hardened Wire. Angled Head For Easier Work In Confined Spaces. Flame Retardant, Impact-Resistant, Bright Orange Outer Coating With Two Layers Of Insulation Protect Against Electric Shock. Thick, Exceptionally Tough, High-Dielectric White Inner Coating Is Bonded To The Tool. High-Leverage Design For 36-Percent Greater Cutting Power Than Other Plier Designs. Hot-Riveted Joint For Smooth Action And No Handle Wobble. Integral Guards Help Prevent Hand Contact With Conductive Parts. Forged Steel For Maximum Durability. Mfg #D200048INS

• Pliers Grips Made Of Durable Molded Insulation Meet Or Exceed Astm F1505-16 And Iec 60900:2018 Standards For Insulated Tools
• Clearly Marked With The Official 1000-Volt Rating Symbol
• Induction Hardened, Heavy-Duty Knives Cut Acsr, Screws, Nails, And Most Hardened Wire
• Angled Head For Easier Work In Confined Spaces

Klein Tools Heavy-Duty Side Cutting Plier 9". Individually Tested To Exceed The Iec 60900 And Astm F1505 Standards, For Insulated Tools, And Clearly Marked With The Official 1000-Volt Rating Symbol. Two Layers Of Insulation Provide Protection Against Electric Shock. Thick, Exceptionally Tough, High-Dielectric White Inner Coating Is Bonded To The Tool. A Flame Retardant, Impact-Resistant, Bright Orange Outer Coating. High-Leverage Design Provides 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Cuts Acsr, Screws, Nails, And Most Hardened Wire. Integral Guards Help Prevent Hand Contact With Conductive Parts. Mfg #D20009NEINS

• Individually Tested To Exceed The Iec 60900 And Astm F1505 Standards, For Insulated Tools, And Clearly Marked With The Official 1000-Volt Rating Symbol
• Two Layers Of Insulation Provide Protection Against Electric Shock
• Thick, Exceptionally Tough, High-Dielectric White Inner Coating Is Bonded To The Tool
• A Flame Retardant, Impact-Resistant, Bright Orange Outer Coating

Klein Tools Fish tap Pulling Lineman's Plier 9" induction-hardened cutting knives for long life. High-leverage design and rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs. Unique handle tempering helps absorb the snap when cutting wire. Plastic-dipped handles for comfort and ease of identification. Mfg #D20009NETP

• Pkg of 1
• Application: Fish Tape Pulling
• Product Height: 9.000
• Product Length: 0.750

Klein 9'' High-Leverage Side-Cutting Connector Crimping Pliers. Crimping Die Behind Hinge For Superior Leverage Crimping Of Non-Insulated Connectors, Lugs And Terminals. High-Leverage Design Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs. Induction Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Streamlined Design With Sure-Gripping, Cross-Hatched Knurled Jaws. Unique Handle Tempering Helps Absorb The ''snap'' When Cutting Wire. Precision-Hardened Plier Head For On-The-Job Toughness. Plastic-Dipped Handles For Comfort And Ease Of Identification. ''Handform'' Handles For Full Gripping And Cutting Power. Custom, Us-Made Tool Steel. Mfg #D2139NECR

• Crimping Die Behind Hinge For Superior Leverage Crimping Of Non-Insulated Connectors, Lugs And Terminals
• High-Leverage Design Rivet Is Closer To The Cutting Edge For 46-Percent Greater Cutting And Gripping Power Than Other Plier Designs
• Induction Hardened Cutting Knives For Long Life
• Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble

Klein Tools Steel Midget Diagonal Cutting Plier 4". Diagonal Cutting Pliers With Miniature Jaw For Close-Quarter Work With Maximum Visibility. Pliers Have Sharp Pointed Nose For Precise Tip Cutting. Spring-Loaded Action For Self-Opening. Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire. Induction-Hardened Cutting Knives For Long Life. Hot-Riveted Joint Ensures Smooth Action And No Handle Wobble. Plastic-Dipped Handles For Comfort And Ease Of Identification. Custom, Us-Made Tool Steel. Mfg #D2954C

• Diagonal Cutting Pliers With Miniature Jaw For Close-Quarter Work With Maximum Visibility
• Pliers Have Sharp Pointed Nose For Precise Tip Cutting
• Spring-Loaded Action For Self-Opening
• Short Jaws And Beveled Cutting Edges Permit Close Cutting Of Wire