This versatile 11-in-1 multi-tool has everything the professional needs. The integrated screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for quick and easy switch out. The Cushion-Gripâ„¢ handle allows for greater torque and comfort. You'll be reaching for this tool to meet your needs on the job.

• Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes
• Includes industrial strength heat treated bits: 3/8 in., 5/16 in. and 1/4 in. nut drivers, 1 and 2 Phillips, 1/4 in. and 3/16 in. slotted, T10 and T15 TORX, and 1 and 2 square recess
• Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle
• Blast finish bit tips provide a firm hold and reduce cam-out
• The following replacement bits are available: see Cat. No. 32482 (1 Phillips and 3/16 in. Slotted), Cat. No. 32483 (2 Phillips and 1/4 in. Slotted), Cat. No. 32484 (1 Square and 2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)
• TORX is a registered trademark of Acument Intellectual Properties, LLC

The Klein 10-in-1 Multi-Bit Screwdriver / Nut Driver has the bits to handle your most common tasks. From Phillips or Slotted to Square and TORX, these tips are precision-machined for an exact fit. The internal flanges inside the handle provide solid, twist-resistant blade anchor. A Cushion-Grip handle for greater torque and comfort helps you get the job done fast.

• Multi-Bit Screwdriver / Nut Driver shaft holds 8 popular tips and converts to 2 nut driver sizes
• Interchangeable blade for quick and easy switch out
• End of handle is marked to quickly identify tool
• Cushion-Grip handle for greater torque and comfort
• Includes 5/16 in. and 1/4 in. (8 and 6 mm) nut driver sizes
• Features 1, 2 Phillips; 1/4 in. and 3/16 in. (6 and 5 mm) Slotted; T10, T15 TORX; and 1, 2 Square-Recess bits
• TORX is a registered trademark of Acument Intellectual Properties, LLC

The Klein Tools Magnetic Screwdriver Set with 32 pieces provides tamperproof reliability and the flexibility to tackle a variety of jobs. A Cushion-Gripâ„¢ handle offers greater torque and comfort while the industrial strength steel bits lend long-lasting durability. For added convenience, a gray PVC storage block is included for trouble-free bit storage.

• Multi-bit screwdriver / nut driver with sturdy bit and screw holding magnet that allows for screws to fit securely in place for easy use
• Includes complete tamperproof bit set in storage block
• TORX® bits included: T7, T8, T10, T15, T20, T25, T27, T30 and T40. TORX® is a registered trademark of Acument Intellectual Properties, LLC
• Includes 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch and 3/16-Inch Fraction Hex bits
• Includes 2, 2.5, 3, 4 and 5 mm metric hex bits
• Includes 4, 6, 8, and 10 Spanner bits
• Includes 1, 2, 3 and 4 Tri-Wing® bits
• TORQ-SET® bits included: 6, 8 and 10
• Includes 1/4-Inch square to 1/4-Inch hex adapter to drive sockets
• TORQ-SET® and Tri-Wing® are registered trademarks of Phillips Screw Co

Klein Tools Nut Driver Set contains the type of nut drivers professionals carry most often. Each nut driver in this 7-piece set features a full hollow shaft for work on stacked circuit boards or other long bolt applications. Klein's patented Cushion-Grip handle provides greater torque and comfort.

• Tool Set includes general purpose selection of the most frequently used nut drivers
• Nut Drivers' 6 in. (15 cm) full hollow shaft facilitates work on long bolt applications
• Set contains Klein Cat. Nos. 646-3/16, 646-1/4, 646-5/16, 646-11/32, 646-3/8, 646-7/16 and 630-1/2 nut drivers
• Cushion-Grip handles allow for greater torque and comfort
• Made in USA
• Shafts are chrome-plated for smooth feel and corrosion resistance
• Internal flanges provide solid, twist-resistant shaft anchor

This 7-Piece Klein Tools Screwdriver Set contains the most frequently used, general purpose screwdrivers. Included are three cabinet-tip, two Phillips-tip, and two keystone-tip style screwdrivers. Each screwdriver features Klein's patented Tip-Ident which allows quick identification of the type of screwdriver and tip orientation.

• These screwdrivers are a general-purpose selection of the most frequently used screwdriver tips and sizes
• Screwdriver Set includes three cabinet-tip, two Phillips-tip and two keystone-tip styles
• Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
• Internal flanges inside handle provide solid, twist-resistant blade anchor
• Made in USA
• Special heat-treated shafts
• Precision-machined tip for exact fit
• Meets or exceeds applicable ASME / ANSI specifications
• Tip-Ident quickly identifies the screwdriver type and tip orientation

The screwdrivers in Klein Tools' 2-Piece Insulated Screwdriver set have two layers of insulation to protect from electric shock. A thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool, while a bright orange outer coating is flame and impact resistant. Klein insulated tools exceed the IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol.

• Screwdriver Set includes one 1/4-Inch Cabinet-Tip (Cat. No. 602-4-INS) and one #2 Phillips-Tip (Cat. No. 603-4-INS)
• Insulated screwdrivers reduce risk with work up to 1000 volts
• Durable, two-layer, molded insulation
• Orange outer coating is flame and impact resistant; white high-dielectric inner coating is bonded to the steel
• Made in USA
• Cushion-Grip handles for greater torque and comfort
• Meets or exceeds IEC 60900 and ASTM F1505 standards for insulation
• Includes non-magnetic tips

This 7-Piece Nut Driver Set from Klein Tools features a wide selection of the most frequently used nut drivers with 3-Inch (76 mm) shafts. Each nut driver features Tip-Ident to quickly identify the nut driver and size. Cushion-Grip handles provide for greater torque and comfort, no slippage.

• Tool Set has general-purpose selection of the most frequently used nut drivers
• Nut Drivers full hollow shafts facilitate work on long bolt applications with internal flanges that provide solid, twist-resistant shaft anchor
• Cushion-Grip handles allow for greater torque and comfort
• Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener
• Made in USA

The 8 piece screwdriver set features a general purpose selection of the most frequently used screwdrivers. Tip-Ident quickly identifies the screwdriver type and tip orientation. Internal flanges inside handle provide solid, twist-resistant blade anchor. The tips are precision-machined for the exact fit you expect Klein Tools.

• These screwdrivers are a general-purpose selection of the most frequently used screwdriver tips and sizes
• Screwdriver Set with 8 Cushion-Grip Screwdrivers, 1/4 in. (6.4 mm) , 5/16 in. (7.9 mm) Keystone, 5/16 in. (7.9 mm) and 3/16 in. (4.8 mm) Cabinet Tip, #1, #2, #3 Phillips, #2 Phillips Stubby
• Tip-Ident quickly identifies the screwdriver type and tip orientation
• Premium chrome-plated for smooth feel and corrosion resistance and precision-machined tip for exact fit
• Made in USA
• Cushion-Grip handles for greater torque and comfort
• Internal flanges inside handle provide solid, twist-resistant blade anchor
• Special heat-treated shafts for added durability
• Meets or exceeds applicable ASME / ANSI specifications

This Magnetic Nut Driver set from Klein Tools features two of the most frequently used nut driver sizes. They feature full 6-Inch (15 cm) hollow shafts that fit easily over extra-long bolts and studs. The handle end is also color coded to easily identify the nut drivers in a tool bag or pouch.

• Tool Set includes general purpose selection of the most frequently used nut drivers (Cat. Nos. 646-1/4M and 646-5/16M)
• Full-hollow shaft design with Rare-Earth magnetic tip facilitates work on bolt applications
• Handle end is color-coded for easy identification
• Internal flanges provide solid, twist-resistant shank anchor
• Made in USA
• Cushion-Grip handle allows for greater torque and comfort
• Color-coded for easy identification

The full hollow shaft design facilitates work on stacked circuit boards or other long bolt or stud applications. Klein's exclusive Cushion-Grip handle offers greater torque and outstanding comfort. The patented Tip- Ident quickly identifies nut driver and size.

• Reaches into deep recesses and fits over extra-long bolts and studs
• Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
• Internal flanges provide solid, twist-resistant shaft anchor
• Premium chrome plated for smooth feel and corrosion resistance
• Made in USA
• Meets or exceeds applicable ASME / ANSI specifications
• Handle end is also color coded for easy identification
• Cushion-Grip handle allows for greater torque and comfort
• Tip-Ident quickly identifies nut driver and size

Get to those deeply recessed nuts and bolts with Klein's hollow shank nut driver. The full hollow 6 in. (152 mm) shaft fits over extra-long bolts and studs for most applications including stacked circuit boards. The comfortable Cushion-Grip allows for greater torque and enables tool to be used for hours without fatigue.

• Reaches into deep recesses and fits over extra-long bolts and studs
• Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
• Internal flanges provide solid, twist-resistant shaft anchor
• Premium chrome plated for smooth feel and corrosion resistance
• Made in USA
• Meets or exceeds applicable ASME / ANSI specifications
• Handle end is also color coded for easy identification
• Cushion-Grip handle allows for greater torque and comfort
• Tip-Ident quickly identifies nut driver and size