The MILWAUKEE SHOCKWAVE 6" Phillips #2 Impact Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (1) SHOCKWAVE 6" PH2 IMPACT BIT

The Milwaukee 48-20-7490 is a 5-Piece Carbide 2-Cutter SDS Bit Kit. Milwaukee's 44 Magnum series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through re-bar and mesh. The distinctive chisel shaped tip breaks concrete quickly for faster penetration. The 4-fluted spiral shaft has improved dust removal resulting in less bending stresses. Available in diameters from 5/32 in. to 5/8 in. Assortment of 5 bits.

• Assorted diameters
• SDS shank
• 2-cutter head
• Drilling depth
• Assorted lengths
• Carbide construction

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.

• POWER TIPâ„¢ with dynamic cutting edges provides ultimate material disruption for increased productivity
• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete 
• Easier Drilling. Start to Finish.
• Chip Breaker disperses material load throughout tip for balanced drilling experience
• Sharpened carbide edges for faster starts and less bit walking
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• Wide flute design for fast, efficient dust removal and more holes per charge
• For use in concrete, brick, and block
• ¼’” Hex shank for added tool versatility
• Set includes (1) 5/32" x 4" x 6", (2) 3/16" x 4" x 6", (2) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6"

DEWALT has a well-earned reputation for designing and manufacturing many of the worlds most reliable and best-performing professional-grade power tools. And every product is forged with DEWALT unwavering commitment to producing tools and accessories that can withstand harsh jobsite conditions and meet the unyielding day-to-day demands of professional contractors. And now, DEWALT has applied that same no-nonsense, Guaranteed tough philosophy to its new line of heavy-duty hand tools. Designed to deliver the same standard of excellence as its power tools, DEWALT hand tools were conceived on the jobsite and built to exceed the expectations of professional homebuilders, remodeling contractors, plumbers, electricians, industrial maintenance mechanics, drywall hangers, demolition crews and all other construction trades.

• Patented locking feature protects fingers and improves productivity
• Solid steel side plate for added strength
• Keys lock into 3 positions (90, 135, 180) helps maneuver into awkward spaces and reduce slipping during use
• Durable and ergonomic design
• 8-piece set includes most popular sizes (S9, S10, S15, S20, S25, S27, S30, S40)
• Long lasting
• Limited lifetime warranty

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 1/4" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: (1) SHOCKWAVE 3/8 X 1-7/8 IMPACT MAGNETIC NUT DRIVER
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The Milwaukee 3/32 in. SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and 4 cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life verses black oxide drill bits.

• 5X life verses black oxide drill bits
• 1/4 in. hex shank, use in drills or impact drivers
• SHOCKWAVE Impact Duty bits
• 135 degree split point tip
• Titanium coated for longer life
• Ideal for wood, plastics and metals
• Available in 29 fractional sizes
• Includes: two 3/32 in. SHOCKWAVE red HELIX titanium drill bit

Milwaukee auger bits are designed for electricians, plumbers, utilities and any trade requiring fast, clean holes in wood. The double wing spurs continually scribe the hole producing smooth holes without breakout. The flutes are coated, which produces a non-stick surface for fast and smooth chip ejection. The shanks are also impact rated for added durability and versatility no matter the trade.

• Steel construction for strength
• Induction-hardened tip provides nail durability
• Coated flutes for quick chip removal
• Self-feeding screw point
• Impact-rated shank
• Includes: 7/8 in. x 18 in. ship auger bit

The MILWAUKEE SHOCKWAVE 3" Impact Duty Magnetic Bit Holder is engineered for extreme durability and Up to 30X Life. The Milwaukee magnetic bit holder is made from proprietary Custom Alloy76 steel, heat treated to control hardness. The SHOCKWAVE Impact Duty magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement and a C-ring to retain the insert bit. The drill bit holder has a 2-Piece construction providing users with optimal assembly for abusive jobsite applications.

• Use with Milwaukee SHOCKWAVE Impact Duty Insert Bits
• 2-Piece construction withstands abuse in impact applications
• Proprietary steel and heat treat process for maximum strength and durability
• Strong magnetic tip holds fasteners to the drive guide
• C-ring retains the insert bit
• Custom Alloy76 Steel maximizes resistance to wear and shock
• Engineered for extreme durability and up to 30X life
• Includes: (1) SHOCKWAVE 3" Impact Magnetic Bit Holder

The MILWAUKEE SHOCKWAVE 2.36" Compact Impact Magnetic Bit Holder is engineered for extreme durability and Up to 30X Life. The Milwaukee magnetic bit holder is made from proprietary Custom Alloy76 steel, heat treated to control hardness. The SHOCKWAVE Impact Duty magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement and a C-ring to retain the insert bit. The drill bit holder has a 2-Piece construction providing users with optimal assembly for abusive jobsite applications.

• Use with Milwaukee SHOCKWAVE Impact Duty Insert Bits
• 2-Piece construction withstands abuse in impact applications
• Proprietary steel and heat treat process for maximum strength and durability
• Strong magnetic tip holds fasteners to the drive guide
• C-ring retains the insert bit
• Custom Alloy76 Steel maximizes resistance to wear and shock
• Engineered for extreme durability and up to 30X life
• Includes: (1) SHOCKWAVE COMPACT IMPACT MAGNETIC BIT HOLDER

The MILWAUKEE SHOCKWAVE 3.5" Phillips #2 Impact Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (5) SHOCKWAVE 3.5" PH2 IMPACT BIT

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: (3) SHOCKWAVE 1/4 X 1-7/8 IMPACT MAGNETIC NUT DRIVER
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE SHOCKWAVE Impact Duty 23PC RED HELIX Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat leading to improved performance. Designed with a VARIABLE HELIX flute that begins with an aggressive 35° helical angle and ends at 15° for rapid chip removal. The bits also feature an internal thicker tapered web that greatly increases strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals. MILWAUKEE RED HELIX Titanium Drill Bits provide up to 5X life vs. black oxide drill bits. The set is organized in a customizable accessory case designed for use in PACKOUT.

• RED HELIX Technology combines QUAD EDGE tip, VARIABLE HELIX flute, and thicker tapered web
• QUAD EDGE Tip stays sharper longer
• VARIABLE HELIX flute designed for rapid chip removal
• Thicker tapered web design increases bit strength
• Titanium Coated for 5X Life vs. Black Oxide Drill Bits
• 1/4" hex shank for use with Impact Drivers and Drill Drivers
• Ideal for Metal, Wood, & Plastics
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Customizable accessory case is designed for use in PACKOUT
• Includes: (2)1/16" , (2)5/64" , 3/32", (2)7/64" , (2)1/8" , 9/64", (2)5/32" , 11/64", (2)3/16" , 13/64", 7/32", (2)1/4" , 5/16", 3/8", 1/2" Bits, Carrying Case

Milwaukee Step Drill Bits with JAM-FREE Performance are optimized for Cordless Drills in High Speed. Featuring a dual-flute design delivering up to 2X faster whole times, up to 4X longer life and up to 50% more holes per battery charge than the competition. Ideal for drilling large and small-diameter holes in steel and plastic. The Rapid Strike tip allows for fast, accurate starts that generate less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, whole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling.

• Jam-free performance: dual-flute design optimized for cordless drills in high speed provides greater speed and control
• Rapid strike tip: creates fast, accurate starts and generates less heat
• Laser-engraved reference marks: easily stop on any whole size
• 3-flat secure-grip shank: reduces bit slippage in the chuck

Milwaukee Step Drill Bits with JAM-FREE Performance are optimized for Cordless Drills in High Speed. Featuring a dual-flute design delivering up to 2X faster whole times, up to 4X longer life and up to 50% more holes per battery charge than the competition. Ideal for drilling large and small-diameter holes in steel and plastic. The Rapid Strike tip allows for fast, accurate starts that generate less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, whole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip shank ensures a solid connection with the drill chuck.

• Jam-free performance: dual-flute design optimized for cordless drills in high speed provides greater speed and control
• Rapid strike tip: creates fast, accurate starts and generates less heat
• Laser-engraved reference marks: easily stop on any whole size
• 3-flat secure-grip shank: reduces bit slippage in the chuck

The MILWAUKEE THUNDERBOLT 21PC Black Oxide Drill Bit Set offers heavy-duty performance on the jobsite. Black Oxide coating reduces heat build-up and provides corrosion resistance. The thicker core provides ultimate strength and protects against side-load breakage while a specially designed parabolic flute form clears chips and debris fast to keep the bit cool. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. MILWAUKEE THUNDERBOLT Black Oxide Coated bits are ideal for various drilling applications in wood, plastics, and metals. The set is organized in a customizable accessory case designed for use in PACKOUT.

• 135° Split Point Tip for precision starts and faster holes
• Thicker core resists breaking
• Black Oxide coating for corrosion resistance
• Parabolic flute form clears chips fast
• 3-FLAT SECURE-GRIP prevents bit from slipping in chuck
• Designed for use with Drill Drivers
• Ideal for Metal, Wood, & Plastics
• Customizable accessory case is designed for use in PACKOUT
• Includes: (2) 1/16, (2) 5/64, (1) 3/32, (1) 7/64, (2) 1/8, (1) 9/64, (1) 5/32, (1) 11/64, (2) 3/16, (1) 13/64, (1) 7/32, (1) 15/64, (2) 1/4, (1) 5/16, (1) 3/8, (1) 1/2

The MILWAUKEE 8-Piece 6 in. Universal QUIK-LOK Flat Boring Bit Set adds convenience and reach for boring holes at any angle in wood. Bore small, clean holes at any angle in a variety of wood materials. The double wing spurs provide easy hole formation while reducing vibration and preventing break out. The patented cutting edge on the spade bit produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. Universal QUIK-LOK design allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in. and 1-1/8 in. boring bits plus a 6 in. QUIK-LOK Extension in a carrying case.

• Precise cutting edge
• Double wing spurs
• Wire pulling hole
• Clean holes: double wing spurs allow for fast, clean hole cutting
• Versatile: 1/4 in. quick-change hex shank can be used in all universal QUIK-LOK extensions
• Kit includes 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in. and 1-1/8 in. bits plus a 6 in. QUIK-LOK Extension in a carrying case
• Sharp cutting edge: patented edge promotes easy wood boring, faster chip removal and reduced vibration

The DEWALT 8-Piece SAE Locking Hex Key Set comes with 8 SAE hex keys in various sizes. This hex key set features a locking mechanism for added torque. It can be folded closed with a simple push of the release button.

• Set includes 8 SAE hex keys in sizes 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in. and 1/4 in.
• Push the silver release button to adjust keys or fold the tool closed
• Locking mechanism fixes hex keys in place to help deliver maximum torque
• Hex keys lock at 90, 135 and 180
• Limited lifetime warranty
• Long lasting
• Durable construction

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 3/16" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE 3/16" SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and four cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life vs. black oxide drill bits.

• 5X Life vs. Black Oxide Drill Bits
• 1/4" Hex Shank. Use in Drills or Impact Drivers
• SHOCKWAVE Impact Duty Bits
• 135 degree Split Point Tip
• Titanium Coated for longer life
• Ideal for Wood, Plastics, & Metals
• Available in 29 fractional sizes
• Includes: (1) 3/16" SHOCKWAVE RED HELIX Titanium Drill Bit

Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill bits provide up to 30% faster drilling speeds and up to 20% more holes per charge in cordless rotary hammers. Breaker Point pulverize the material more effectively resulting in up 30% faster drilling speeds compared to competitive SDS-Plus drill bits. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in brick, block, and concrete for cordless and corded rotary hammer users.

• Breaker points for up to 30% faster drilling speeds
• Variable flutes for up to 20% more holes per battery charge in cordless rotary hammers
• Rebar guards for increased durability in hard aggregate
• Reinforced Flutes to avoid bit breakage
• Centering tip for exact spot drilling
• Wear mark indicators to indicate end of life
• ANSI specified to fit common anchors

The MILWAUKEE RED HELIX Cobalt 7/64 in. Drill Bit are engineered for extreme durability and longer life in hard metal applications. The Milwaukee Cobalt drill bits are designed with a VARIABLE HELIX that includes an aggressive 35 degree Helix Angle which ends at 15 degree . The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.The tapered drill bits feature a new ENHANCED TAPERED WEB that strengthens the bit's core to increase flute durability. The cobalt twist drill bits are ideal for tough applications, providing up to 15X life vs. Black Oxide Drill Bits.

• Cobalt alloy for up to 15x life vs. black oxide drill bits
• ENHANCED TAPERED WEB strengthens the bits core
• VARIABLE HELIX Design for rapid material extraction
• 3-Flat Secure-Grip helps keep the bit fixed within the the chuck
• Designed for Hard Metals, PVC and Wood

For fast, small hole drilling in wood, count on Milwaukee's Premium quality 13/16 in. Flat Boring Bit. Made of heat treated High Carbon steel, the Flat Boring Bit bores clean holes at any angle in wood, plastic, plywood and Formica. The drill point and cutting edges can be re-sharpened often for economical hole drilling. Bit offers a 6 in. drilling depth but can be used with 12 in. extension, 48-28-3350, for extended deep hole drilling. 1 per package.

• Patented cutting edge for fast and easy wood boring
• Double wing spurs for easy hole formation
• 1/4 in. quick-change hex shank for use in all universal QUIK-LOK extensions
• Patented cutting edge produces easier and faster wood boring over conventional models

The MILWAUKEE RED HELIX Cobalt 5/32 in. Drill Bit are engineered for extreme durability and longer life in hard metal applications. The Milwaukee Cobalt drill bits are designed with a VARIABLE HELIX that includes an aggressive 35 degree Helix Angle which ends at 15 degree . The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.The tapered drill bits feature a new ENHANCED TAPERED WEB that strengthens the bit's core to increase flute durability. The cobalt twist drill bits are ideal for tough applications, providing up to 15X life vs. Black Oxide Drill Bits.

• Cobalt alloy for up to 15x life vs. black oxide drill bits
• ENHANCED TAPERED WEB strengthens the bits core
• VARIABLE HELIX Design for rapid material extraction
• 3-Flat Secure-Grip helps keep the bit fixed within the the chuck
• Designed for Hard Metals, PVC and Wood

Install small wire systems easily and efficiently with the Milwaukee 1/4 in. x 18 in. Bellhanger Bit. Designed for installing all types of small wire systems including computer, security, phone and cable, Milwaukee Bellhanger Bits provide extra reach where needed and a hole in the tip to help pull wires through holes. The bits feature aggressive tip geometry for faster cutting and non-stick, coated flutes for fast chip removal and reduced binding. The 3-Flat Secure-Grip shank prevents the bits from spinning in the drill chuck. Milwaukee Bellhanger bits are available in 12 in., 18 in. and 24 in. L.

• Steel construction for durability
• Aggressive tip geometry provides quick cutting
• Coated flutes for fast chip removal
• Wire-pulling hole enables wire to be attached to the bit and pulled through holes when needed
• 3-flat shank helps prevent the bit from slipping in the drill's chuck
• Includes: 1/4 in. x 18 in. bell hanger bit

Extend your reach a full 12 In. when drilling with Milwaukee Selfeed Bits, Auger Bits and Hole Saws. The Quick Change shank is 7/16 In. hex. The 7/16 In. hex fits both 3 jawed chucks, 1/2 In. drill capacity and larger, as well as 7/16 In. Quick Change chucks.

• 7/16 In. hex shank
• 12 In. length
• For selfeed bits, auger bits and hole saw 1 In. diameter and larger with 7/16 In. shank
• Hole saw and arbors are interchangeable with most other brands

The MILWAUKEE SHOCKWAVE 2" Impact T25 Torx Bit is engineered to be the Most Durable, Best Fitting driver bit on the market. The Wear Guard Tip delivers increased wear resistance which protects the fit over the life of the bit. The Shockzone is optimized for for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 has a customized steel and heat treatment per tip type to extend the life of the driver bits, providing up to 50X life vs. competitive impact driver bits. The SHOCKWAVE driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (1) SHOCKWAVE 2" T25 IMPACT BIT

For fast, small hole drilling in wood, count on Milwaukee's Premium quality 13/16 in. Flat Boring Bit. Made of heat treated High Carbon steel, the Flat Boring Bit bores clean holes at any angle in wood, plastic, plywood and Formica. The drill point and cutting edges can be resharpened often for economical hole drilling. Bit offers a 6 in. drilling depth but can be used with 12 in. extension, 48-28-3350, for extended deep hole drilling. 1 per package.

• Patented cutting edge for fast and easy wood boring
• Double wing spurs for easy hole formation
• 1/4 in. quick-change hex shank for use in all universal QUIK-LOK extensions
• Patented cutting edge produces easier and faster wood boring over conventional models

The MILWAUKEE 1/8" SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and four cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life vs. black oxide drill bits.

• 5X Life vs. Black Oxide Drill Bits
• 1/4" Hex Shank. Use in Drills or Impact Drivers
• SHOCKWAVE Impact Duty Bits
• 135 degree Split Point Tip
• Titanium Coated for longer life
• Ideal for Wood, Plastics, & Metals
• Available in 29 fractional sizes
• Includes: (2) 1/8" SHOCKWAVE RED HELIX Titanium Drill Bit

Milwaukee Step Drill Bits with JAM-FREE Performance feature a dual-flute design delivering up to 2 times faster hole times, up to 4 times longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for Cordless Drills in High Speed. The Rapid Strike tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black-oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip shank ensures a solid connection with the drill chuck. The Step Drill Bit 3-Piece Set includes bits #1 (48-89-9201), #2 (48-89-9202) and #4 (48-89-9204). Jam-Free Performance in high speed with most professional 18-Volt cordless drills with lithium-ion battery technology.

• Jam-free performance: dual-flute design optimized for cordless drills in high speed provides greater speed and control
• Rapid strike tip: creates fast, accurate starts and generates less heat
• Laser-engraved reference marks: easily stop on any whole size
• 3-flat secure-grip shank: reduces bit slippage in the chuck
• Includes one 48-89-9201 Milwaukee 1 step bit 1/8 in. to 1/2 in. one 48-89-9202 Milwaukee 2-step bit 3/16 in. to 1/2 in. one 48-89-9204 Milwaukee 4 step bit 3/16 in. to 7/8 in.
• Up to 4 times longer bit life: optimized geometry with black oxide coating to cut faster and produce less heat
• Up to 2 times faster: optimized for cordless drills in high speed

The MILWAUKEE RED HELIX Cobalt 1/4 in. Drill Bit are engineered for extreme durability and longer life in hard metal applications. The Milwaukee Cobalt drill bits are designed with a VARIABLE HELIX that includes an aggressive 35 degree Helix Angle which ends at 15 degree . The drill bits have QUADEDGE TIP to decrease heat buildup and drill faster. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.The tapered drill bits feature a new ENHANCED TAPERED WEB that strengthens the bit's core to increase flute durability. The cobalt twist drill bits are ideal for tough applications, providing up to 15X life vs. Black Oxide Drill Bits.

• Cobalt alloy for up to 15x life vs. black oxide drill bits
• QUADEDGE TIP designed to decrease heat build up and drill faster
• ENHANCED TAPERED WEB strengthens the bits core
• VARIABLE HELIX Design for rapid material extraction
• 135 degree split point for precision start no walking
• 3-Flat Secure-Grip helps keep the bit fixed within the the chuck
• Designed for hard metals, PVC and wood

The Milwaukee Shockwave 36pc Impact Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The Shockzone is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits have Custom Alloy76 for a customized steel and heat treatment per tip type to extend the life of the user's driver bits, providing up to 50X life versus other impact driver bits on the market. The Milwaukee Shockwave driver bits are built to provide users with extreme durability for the most demanding applications.

• Optimized Shockzone absorbs peak torque and prevents breaking
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Designed for use with Impact Drivers and Drill Drivers.
• Includes: (1) 1/4 in. Insert Magnetic Nut Driver, (1) 5/16 in. Insert Magnetic Nut Driver, (1) Hex Bit 1 in. 1/4 in., (1) Hex Bit 1 in. 1/8 in., (1) Hex Bit 1 in. 3/16 in., (1) Hex Bit 1 in. 3/32 in., (1) Hex Bit 1 in. 5/32 in., (1) Hex Bit 1 in. 5/64 in., (1) Hex Bit 1 in. 7/64 in., (1) Hex Bit 1 in. 9/64 in., (1) Insert 3/8 in. Socket Adapter, (1) Phillips Bit 1 in. P1, (1) Phillips Bit 1 in. P3, (1) Phillips Reduced 1 in. PR2 Bit, (1) SHOCKWAVE Compact Magnetic Bit Holder, (1) Slotted 1 in. #12 Bit, (1) Slotted 1 in. #8 Bit, (1) Square Bit 1 in. SQ1, (1) Square Bit 1 in. SQ3, (1) TORX Bit 1 in. T10, (1) TORX Bit 1 in. T15, (1) TORX Bit 1 in. T27, (1) TORX Bit 1 in. T30, (1) TORX Bit 1 in. T40, (2) Slotted 1 in. #10 Bit, (2) Square Bit 1 in. SQ2, (2) TORX Bit 1 in. T20, (2) TORX Bit 1 in. T25, (3) Phillips Bit 1 in. P2
• Includes: Compact Magnetic Bit Holder; 6" Magnetic Bit Holder; (31) 1" Insert Bits: P1, (3) P2, PR2, P3, SQ1, (2) SQ2, SQ3, T10, T15,2) T20, (2) T25, T27, T30, T40, SL3/16", (2) SL1/4", SL9/32", 5/64" Hex, 3/32" Hex, 7/64" Hex, 1/8" Hex, 9/64" Hex, 5/32" Hex, 3/16" Hex, 1/4" Hex; (2) Insert Magnetic Nut Drivers: 1/4", 5/16"; Insert Socket Adapter: 1/4" Hex to 3/8" Square Drive

Milwaukee Thunderbolt Black Oxide jobber length drill bits are designed for extreme durability and long life. The Thunderbolt web features a thicker core than a standard drill bit to provide ultimate strength and protect against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Effective for drilling on curved surfaces, Milwaukee Thunderbolt Black Oxide bits require less effort to drill through metal, wood and PVC and are highly recommended for use with portable drills.

• Thunderbolt web, provides longer life and faster driller times
• Parabollic flute, clears chips faster
• 135 degree split point, precision start no walking
• 3-flat secure grip shank, reduces bit slipping in chuck

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: (1) SHOCKWAVE 1/4 X 1-7/8 IMPACT MAGNETIC NUT DRIVER
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE SHOCKWAVE 3.5" Phillips #2 Impact Bit is engineered to be the Most Durable, Best Fitting driver bit on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (1) SHOCKWAVE 3.5" PH2 IMPACT BIT

The Milwaukee SHOCKWAVE Impact Duty Electrical Step Bits are engineered to deliver the most durable and fastest impact step bit hole drilling solution. The step drill bits are global materials and deliver best-in-class performance in impact drivers with the versatility to be used in drills. The hex shank has an optimized Shockzone body providing the industry's most durable shank, reducing early shank breaks. A Titanium Aluminum Nitride (TiAlN) coating delivers 5X longer life, while the step drill bit's Rapid Strike tip and dual spiral flute produce 2X faster holes. The step drill bit kit features the #1 1/8 in. - 1/2 in., #4 3/16 in. - 7/8 in. and #9 7/8 in. and 1-1/8 in. step bits with laser engraving for a clear stop on size identification.

• Milwaukee SHOCKWAVE Impact Duty electrical step drill bit kit is optimized for impact drivers, drill/driver compatible, give 5X longer life, 2X faster holes
• Optimized for impact drivers, drill/driver compatible
• Titanium aluminum nitride (TiAlN) coating delivers 5X longer life than competitive impact step bits
• Rapid strike tip provides fast and accurate starts
• Dual spiral flute combined with the rapid strike tip delivers up to 2X faster holes than competitive impact step bits
• Optimized Shockzone reduces early shank breaks
• Global materials
• Laser engraving for clear stop on size identification
• Includes: one SHOCKWAVE Impact Duty step bit #1 1/8 in. - 1/2 in. (48-89-9241), one SHOCKWAVE Impact Duty step bit #4 3/16 in. - 7/8 in. (48-89-9244), one SHOCKWAVE Impact Duty step bit #9 7/8 in. and 1-1/8 in. (48-89-9249)

The Milwaukee QUIK-LOK 5-1/2 in. x 7/16 in. Steel Universal Extension Bit does not require tools to change out bits. This extension bit accepts most 7/16 in. shanks, with or without a power-groove. Solid-steel backing plate allows for rugged metal construction.

• Accepts most 7/16 in. shanks, with or without a power-groove
• High-speed steel
• Impact rated for durability
• Unique design does not require tools to change out bits
• Solid Steel backing plate
• Extends reach for tight spaces
• 3-flat shank style

The Milwaukee SDS-PLUS 4-Cutter MX4 5-Piece Drill Bit Kit features solid carbide heads that deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. MX4 4-Cutter bits are designed with sharp centering tips for exact spot drilling in concrete and metal decking. The 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. Wear mark indicator shows users the end of life when the bits no longer meet the ANSI requirement. The Milwaukee MX4 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.

• 4-cutter design prevents lock-up in rebar, reducing downtime
• Variable flutes remove dust faster reducing heat & delivering up to 20% more holes per battery charge
• German made
• Meets ANSI B212.15 to fit common anchors
• Wear mark indicator to show end of life and when bit no longer meets the ANSI requirement
• Ideal for concrete with rebar and masonry
• Fits all SDS-PLUS rotary hammers

The MILWAUKEE 1/2" SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and four cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life vs. black oxide drill bits.

• 5X Life vs. Black Oxide Drill Bits
• 1/4" Hex Shank. Use in Drills or Impact Drivers
• SHOCKWAVE Impact Duty Bits
• 135 degree Split Point Tip
• Titanium Coated for longer life
• Ideal for Wood, Plastics, & Metals
• Available in 29 fractional sizes
• Includes: (1) 1/2" SHOCKWAVE RED HELIX Titanium Drill Bit

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits use sharpened carbide to deliver up to 5x longer life in concrete and up to 2x faster drilling into masonry material. Engineered with a precision ground tip, these hammer drill bits deliver faster starts and less walking in concrete, brick, and block. The wide flute design removes dust faster, reducing heat and providing more holes per charge. Equipped with a ¼” Hex Shank, the Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. This kit includes (1) 1/8", (1) 5/32", (1) 3/16", (1) 1/4", (1) 5/16", (1) 3/8“, (1) 1/2" SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits. Packaged in a medium, single-sided hard case designed for use in PACKOUT™.

• Up to 5x life in concrete
• Up to 2x faster versus standard masonry bits
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• Durable carbide tip for longer life in concrete and hard aggregate
• Sharpened carbide edges for faster starts in concrete, brick, and block
• Precision ground carbide tip for less bit walking
• Case is designed for use in PACKOUTâ„¢
• Wide flute design for fast dust removal
• Ideal for concrete, brick, and block
• ¼’” hex shank for added tool versatility
• Kit includes (1) 1/8" x 2" x 3-1/2", (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6", (1) 1/2" x 4" x 6"

Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill bits provide up to 30% faster drilling speeds and up to 20% more holes per charge in cordless rotary hammers. Breaker Point pulverize the material more effectively resulting in up 30% faster drilling speeds compared to competitive SDS-Plus drill bits. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in brick, block, and concrete for cordless and corded rotary hammer users.

• Breaker points for up to 30% faster drilling speeds
• Variable flutes for up to 20% more holes per battery charge in cordless rotary hammers
• Rebar guards for increased durability in hard aggregate
• Reinforced Flutes to avoid bit breakage
• Centering tip for exact spot drilling
• Wear mark indicators to indicate end of life
• ANSI specified to fit common anchors

Milwaukee Electric Tool Corporation introduces new Speed Feed Self-Feeding Wood Bits delivering clean holes up to 10 times faster than flat boring bits. Speed Feed Wood Bits include features such as a feed screw, double wing spurs and a tapered design. The double wing spurs cut clean holes for feeding wire or bolts through and the feed screw and dual cutting edges provide up to 10 times faster drilling vs. flat boring bits. Many applications, such as running new home electrical wires through dimensional lumber, require the user to make clean holes so the wire will not get caught on debris or splinters. While flat boring bits are often used for this type of application, the new Speed Feed Wood Bits provide improved performance over their counterpart and allow the user to get the job done much faster and with less effort.

• Up to 10 times faster drilling vs. flat boring bits
• Coated flutes for fast chip removal
• Double wing spurs for clean hole cutting
• 1/4 in. power groove shank fits all 1/4 in. extensions
• INCLUDES: (1) SPEED FEED Wood Bit 5/8" x 6" (48-13-0058), (1) SPEED FEED Wood Bit 3/4" x 6" (48-13-0068), (1) SPEED FEED Wood Bit 1/2" x 6" (48-13-0048), (1) SPEED FEED Wood Bit 1" x 6" (48-13-0088)

The MILWAUKEE SHOCKWAVE 2" Phillips #1 Impact Bit is engineered to be the Most Durable, Best Fitting driver bit on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (1) SHOCKWAVE 2" PH1 IMPACT BIT

Milwaukee's Bell Hanger bits are ideal for installing all types of small wire systems including computer, security, phone and cable. A small hole at the tip of the bit enables wire to be attached to the accessory and pulled through holes when installing wiring systems. Available in 10 different sizes with 12 in., 18 in. and 24 in. lengths they provide extra reach where needed and a hole in the tip to help pull wires through holes. Non-stick coated flutes increase chip ejection and help to reduce binding. An aggressive tip geometry provides faster cutting and the 3-flat shank stops the bit from slipping in the user's drill.

• Aggressive tip geometry provides faster cutting
• Coated flutes for fast chip removal
• Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
• 3-flat shank stops bit from slipping in the drill's chuck

For fast, small hole drilling in wood, count on Milwaukee's Premium quality 13/16 in. Flat Boring Bit. Made of heat treated High Carbon steel, the Flat Boring Bit bores clean holes at any angle in wood, plastic, plywood and Formica. The drill point and cutting edges can be re-sharpened often for economical hole drilling. Bit offers a 6 in. drilling depth but can be used with 12 in. extension, 48-28-3350, for extended deep hole drilling. 1 per package.

• Patented cutting edge for fast and easy wood boring
• Double wing spurs for easy hole formation
• 1/4 in. quick-change hex shank for use in all universal QUIK-LOK extensions
• Patented cutting edge produces easier and faster wood boring over conventional models

The Milwaukee 13/64 in. SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and 4 cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life verses black oxide drill bits.

• 5X life verses black oxide drill bits
• 1/4 in. hex shank, use in drills or impact drivers
• SHOCKWAVE Impact Duty bits
• 135 degree split point tip
• Titanium coated for longer life
• Ideal for wood, plastics and metals
• Available in 29 fractional sizes
• Includes: one 13/64 in. SHOCKWAVE red HELIX titanium drill bit

This 3-Piece Selfeed Bit plumbers' set comes complete with the most popular sizes of selfeed bits for installing common sizes of pipe. The inside cutting plane shaves the hole radius for a clean, smooth hole. Made from heat treated alloy, these bits are designed for maximum durability and wear resistance. The re-sharpenable cutting edge can be sharpened with a standard file. The replaceable feed screw effortlessly pulls the bit through the material and is reusable promoting longer life.

• 3-piece self-feed bit plumbers' set created for end users who demand a clean, easy and cost-effective solution to hole cutting
• 3-piece self-feed bit plumbers' set, offers best in class performance
• Inside cutting plane - produces clean smooth holes
• Heat treated alloy - maximum durability and wear resistance
• Resharpenable - longer bit life-less time and money buying a new bit
• Replaceable feed screw - effortlessly pulls bit through material

The MILWAUKEE SHOCKWAVE 1" Phillips #2 Impact Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise fit custom machined tip prevents stripping and reduces wobble
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: 25 SHOCKWAVE 1 in. PH2 impact bit