The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 1/4" x 2" x 4" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 5/32" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE SHOCKWAVE 6" Phillips #2 Impact Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (1) SHOCKWAVE 6" PH2 IMPACT BIT

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: 1/4 in. , 5/16 in. , 3/8 in. , 7/16 in.
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.

• POWER TIPâ„¢ with dynamic cutting edges provides ultimate material disruption for increased productivity
• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete 
• Easier Drilling. Start to Finish.
• Chip Breaker disperses material load throughout tip for balanced drilling experience
• Sharpened carbide edges for faster starts and less bit walking
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• Wide flute design for fast, efficient dust removal and more holes per charge
• For use in concrete, brick, and block
• ¼’” Hex shank for added tool versatility
• Set includes (1) 5/32" x 4" x 6", (2) 3/16" x 4" x 6", (2) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6"

The MILWAUKEE SHOCKWAVE Impact Duty 23PC RED HELIX Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat leading to improved performance. Designed with a VARIABLE HELIX flute that begins with an aggressive 35° helical angle and ends at 15° for rapid chip removal. The bits also feature an internal thicker tapered web that greatly increases strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals. MILWAUKEE RED HELIX Titanium Drill Bits provide up to 5X life vs. black oxide drill bits. The set is organized in a customizable accessory case designed for use in PACKOUT.

• RED HELIX Technology combines QUAD EDGE tip, VARIABLE HELIX flute, and thicker tapered web
• QUAD EDGE Tip stays sharper longer
• VARIABLE HELIX flute designed for rapid chip removal
• Thicker tapered web design increases bit strength
• Titanium Coated for 5X Life vs. Black Oxide Drill Bits
• 1/4" hex shank for use with Impact Drivers and Drill Drivers
• Ideal for Metal, Wood, & Plastics
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Customizable accessory case is designed for use in PACKOUT
• Includes: (2)1/16" , (2)5/64" , 3/32", (2)7/64" , (2)1/8" , 9/64", (2)5/32" , 11/64", (2)3/16" , 13/64", 7/32", (2)1/4" , 5/16", 3/8", 1/2" Bits, Carrying Case

The Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100.

• Rip Guard, the strongest tooth form in the industry
• Plug Jack, an all access slot design for fast plug removal
• Rip Guard limited lifetime tooth break warranty
• Bi-metal construction with 8% cobalt for increased wear resistance

The MILWAUKEE 3/16" SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and four cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life vs. black oxide drill bits.

• 5X Life vs. Black Oxide Drill Bits
• 1/4" Hex Shank. Use in Drills or Impact Drivers
• SHOCKWAVE Impact Duty Bits
• 135 degree Split Point Tip
• Titanium Coated for longer life
• Ideal for Wood, Plastics, & Metals
• Available in 29 fractional sizes
• Includes: (1) 3/16" SHOCKWAVE RED HELIX Titanium Drill Bit

The MILWAUKEE 1/4" SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and four cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life vs. black oxide drill bits.

• 5X Life vs. Black Oxide Drill Bits
• 1/4" Hex Shank. Use in Drills or Impact Drivers
• SHOCKWAVE Impact Duty Bits
• 135 degree Split Point Tip
• Titanium Coated for longer life
• Ideal for Wood, Plastics, & Metals
• Available in 29 fractional sizes
• Includes: (1) 1/4" SHOCKWAVE RED HELIX Titanium Drill Bit

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 3/16" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE SHOCKWAVE Impact Duty 45PC Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT.

• WEAR GUARD TIP protects fit over the life of the bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble
• SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Up to 50X Life vs other impact bits
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Designed for use with Impact Drivers and Drill Drivers

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 1/4" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE SHOCKWAVE 2.36" Compact Impact Magnetic Bit Holder is engineered for extreme durability and Up to 30X Life. The Milwaukee magnetic bit holder is made from proprietary Custom Alloy76 steel, heat treated to control hardness. The SHOCKWAVE Impact Duty magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement and a C-ring to retain the insert bit. The drill bit holder has a 2-Piece construction providing users with optimal assembly for abusive jobsite applications.

• Use with Milwaukee SHOCKWAVE Impact Duty Insert Bits
• 2-Piece construction withstands abuse in impact applications
• Proprietary steel and heat treat process for maximum strength and durability
• Strong magnetic tip holds fasteners to the drive guide
• C-ring retains the insert bit
• Custom Alloy76 Steel maximizes resistance to wear and shock
• Engineered for extreme durability and up to 30X life
• Includes: (1) SHOCKWAVE COMPACT IMPACT MAGNETIC BIT HOLDER

Milwaukee Step Drill Bits with JAM-FREE Performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are Optimized for Cordless Drills in High Speed. The Rapid Strike tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip shank ensures a solid connection with the drill chuck. The Step Drill Bit 6-Piece Set includes bits #1 (48-89-9201), #4 (48-89-9204), #6 (48-89-9206), #7 (48-89-9207), #8 (48-89-9208) and #9 (48-89-9209). Jam-Free Performance in high speed with most professional 18 volt cordless drills with lithium-ion battery technology.

• Jam-free performance: dual-flute design optimized for cordless drills in high speed provides greater speed and control
• Rapid strike tip: creates fast, accurate starts and generates less heat
• Laser-engraved reference marks: easily stop on any whole size
• 3-flat secure-grip shank: reduces bit slippage in the chuck
• Includes: (1) #9 Step Drill Bit, 7/8 in. and 1-1/8 in. (48-89-9209) , (1) #8 Step Drill Bit, ½ in. - 1 in. by 1/16 in. (48-89-9208) , (1) #7 Step Drill Bit, 7/8 in. Single Hole (48-89-9207) , (1) #6 Step Drill Bit, 3/8 in. and ½ in. by 1/16 in. (48-89-9206) , (1) #4 Step Drill Bit, 3/16 in. - 7/8 in. by 1/16 in. (48-89-9204) , (1) #1 Step Drill Bit, 1/8 in. - ½ in. by 1/32 in. (48-89-9201) , (1) Carrying Case
• Up to 4x longer bit life: optimized geometry with black oxide coating to cut faster and produce less heat

The MILWAUKEE SHOCKWAVE Impact Duty 18PC Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT.

• WEAR GUARD TIP protects fit over the life of the bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble
• SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Up to 50X Life vs other impact bits
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Designed for use with Impact Drivers and Drill Drivers

Milwaukee's 3-Flat Secure-Grip Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 in. 3 jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. 2 per package.

• Designed to fit in 1/2 in. 3-jaw hammer-drill chucks
• Carbide tip for a long life
• 3-flat secure-grip shank prevents the bit from slipping in the chuck during heavy torsional loads
• Reinforced-flute geometry provides excellent drilling speed
• 3/16 in. Dia
• 4 in. drilling depth
• 6 in. overall length
• Includes: 3/16 in. x 6 in. 3-flat secure-grip carbide hammer-drill bit (2-pack)

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: (1) SHOCKWAVE 5/16 X 1-7/8 IMPACT MAGNETIC NUT DRIVER
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE® SHOCKWAVE™ Impact Duty 3in. Bit Holder is the Most Durable bit holder on the market. The optimized SHOCKZONE™ shank absorbs peak torque and prevents breaking. The slim barrel design allows for access in tight spaces. The bit holder has a magnet and c-ring to retain the insert Driver Bit while allowing for easy insertion and removal of Driver Bit Driver Bits.

• Most Durable
• SHOCKZONEâ„¢ shank absorbs peak torque
• Access in Tight Spaces
• Secure Bit Hold
• SHOCKZONEâ„¢ shanks are optimized to prevent breaking
• C-Ring and magnet securely holds bit in and magnetizes bit tip
• Easy insertion and removal of insert Driver Bit Driver Bits
• Designed for use with insert Driver Bit Driver Bits
• Includes: (1) SHOCKWAVE 3" Impact Magnetic Bit Holder

The MILWAUKEE SHOCKWAVE Impact Duty 50PC Drill & Drive Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT.

• WEAR GUARD TIP protects fit over the life of the bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble
• SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Up to 50X Life vs other impact bits
• Titanium Coated Drill bits for 5X Life vs. Black Oxide
• Laser etched size for easy identification
• Includes SHOCKWAVE Impact Duty nut drivers with the most durable magnet for longer life in tough applications
• Designed for use with Impact Drivers and Drill Drivers
• Customizable accessory case is designed for use in PACKOUT

For fast, small hole drilling in wood, count on Milwaukee's Premium quality 13/16 in. Flat Boring Bit. Made of heat treated High Carbon steel, the Flat Boring Bit bores clean holes at any angle in wood, plastic, plywood and Formica. The drill point and cutting edges can be re-sharpened often for economical hole drilling. Bit offers a 6 in. drilling depth but can be used with 12 in. extension, 48-28-3350, for extended deep hole drilling. 1 per package.

• Patented cutting edge for fast and easy wood boring
• Double wing spurs for easy hole formation
• 1/4 in. quick-change hex shank for use in all universal QUIK-LOK extensions
• Patented cutting edge produces easier and faster wood boring over conventional models

The Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100.

• Rip Guard, the strongest tooth form in the industry
• Plug Jack, an all access slot design for fast plug removal
• Rip Guard limited lifetime tooth break warranty
• Bi-metal construction with 8% cobalt for increased wear resistance

This 45 PC. Screwdriving Bit Set contains a variety of screw bit sizes and geometries for the most common uses. Two Nut Drivers are included along with a Magnetic Drive Guide that helps to reduce the stripping and wobbling of screws. These bits are ideal for use in a drill driver.

• Includes the most commonly used screwdriver accessories
• Optimized fastener fitment on number 2 Philips bits
• Double-ended 1 in. bit for extended bit life
• Titanium Nitride coated torsion bits for durability for heavy-duty fastening
• ABS tough case for protection and convenient storage
• Magnetic drive guide reduces wobble

The MILWAUKEE 8-Piece 6 in. Universal QUIK-LOK Flat Boring Bit Set adds convenience and reach for boring holes at any angle in wood. Bore small, clean holes at any angle in a variety of wood materials. The double wing spurs provide easy hole formation while reducing vibration and preventing break out. The patented cutting edge on the spade bit produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. Universal QUIK-LOK design allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in. and 1-1/8 in. boring bits plus a 6 in. QUIK-LOK Extension in a carrying case.

• Precise cutting edge
• Double wing spurs
• Wire pulling hole
• Clean holes: double wing spurs allow for fast, clean hole cutting
• Versatile: 1/4 in. quick-change hex shank can be used in all universal QUIK-LOK extensions
• Kit includes 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in. and 1-1/8 in. bits plus a 6 in. QUIK-LOK Extension in a carrying case
• Sharp cutting edge: patented edge promotes easy wood boring, faster chip removal and reduced vibration

The Milwaukee 3-Piece SHOCKWAVE Impact Hex Shank Socket Adapter Set is engineered for extreme durability and up to 30X life. The SHOCKWAVE Impact Duty Socket Adapters are made from proprietary steel and heat treated to control hardness. The optimized Shockzone absorbs peak torque and prevents breaking for secure fastening capabilities in all impacts. This tool set includes one 1/2 in. Socket Adapter, one 1/4 in. Socket Adapter and one 3/8 in. Socket Adapter.

• Custom Alloy76 Steel is engineered to extend bit life
• Proprietary steel and heat treated for maximum strength and durability
• Heavy-duty construction for fastening capabilities in all impacts
• Optimized Shockzone absorbs peak torque and prevents breaking
• Includes: one 1/4 in. socket adapter, one 3/8 in. socket adapter, one 1/2 in. socket adapter
• Includes: one) 1/4 in. socket adapter, one 3/8 in. socket adapter, one 1/2 in. socket adapter

The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.

• Rip guard, the strongest tooth form in the industry
• Rip guard limited lifetime tooth break warranty
• Plug jack, an all access slot design for fast plug removal
• Bi-metal construction with 8% cobalt for increased wear resistance

The MILWAUKEE THUNDERBOLT 29PC Black Oxide Drill Bit Set offers heavy-duty performance on the jobsite. Black Oxide coating reduces heat build-up and provides corrosion resistance. The thicker core provides ultimate strength and protects against side-load breakage while a specially designed parabolic flute form clears chips and debris fast to keep the bit cool. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. MILWAUKEE THUNDERBOLT Black Oxide Coated bits are ideal for various drilling applications in wood, plastics, and metals. The set is organized in a customizable accessory case designed for use in PACKOUT.

• 135° Split Point Tip for precision starts and faster holes
• Thicker core resists breaking
• Black Oxide coating for corrosion resistance
• Parabolic flute form clears chips fast
• 3-FLAT SECURE-GRIP prevents bit from slipping in chuck
• Designed for use with Drill Drivers
• Ideal for Metal, Wood, & Plastics
• Customizable accessory case is designed for use in PACKOUT
• Includes: 29 piece Thunderbolt Black Oxide Set - 1/16 In. to 1/2 In. x 64th

The MILWAUKEE SHOCKWAVE 3.5" Phillips #2 Impact Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (5) SHOCKWAVE 3.5" PH2 IMPACT BIT

Make hole saw bit changes quickly and easily with the Milwaukee 3/8 in. Large Thread Quick Change Arbor. It doesn't require the use of an adapter and its universal fit is compatible with all hole saw brands. The hardened carbon steel and alloy steel composition stands up to repeated use and the tool-free operation makes bit swaps a cinch.

• Made from hardened carbon steel and alloy steel for superb durability
• Fits 3/8 in. and larger drill chucks
• Drive plate with an enlarged grip area offers easy operation
• Quick-change design enables tool-free bit exchanges
• Hex shank allows higher torque applications and less slippage from your drill

Milwaukee SHOCKWAVE Impact Duty Drill & Drive Set, 60 Piece Wear Guard Tip Protects Fit Over The Life Of The Bit Optimized SHOCK ZONE absorbs peak torque and prevents breaking CUSTOM ALLOY76 Steel is engineered to extend bit life Precise fit, custom machined tip prevents stripping and reduces wobble SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types Laser hardening at the tip creates an outer protective shield for improved wear resistance Customized geometry and heat treatment per tip type for best performance across tip types Up to 50X Life vs other impact bits Titanium Coated Drill bits for 5X Life vs. Black Oxide Laser etched size for easy identification Includes SHOCKWAVE Impact Duty nut drivers with the most durable magnet for longer life in tough applications Designed for use with Impact Drivers and Drill Drivers Customizable accessory case is designed for use in PACKOUT Mfg #48-32-4097

• Wear Guard Tip Protects Fit Over The Life Of The Bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble

SHOCKWAVE Impact Driver Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip delivers increased wear resistance which protects the fit over the life of the bit. The Shockzone is optimized for for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 has a customized steel and heat treatment per tip type to extend the life of the driver bits, providing up to 50X life vs. competitive impact driver bits. SHOCKWAVE driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Optimized Shockzone absorbs peak torque and prevents breaking
• Custom Alloy76 Steel is engineered to extend bit life
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Includes: 10PC Torx Security Insert Bits: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: (1) SHOCKWAVE 1/4 X 1-7/8 IMPACT MAGNETIC NUT DRIVER
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits use sharpened carbide to deliver up to 5x longer life in concrete and up to 2x faster drilling into masonry material. Engineered with a precision ground tip, these hammer drill bits deliver faster starts and less walking in concrete, brick, and block. The wide flute design removes dust faster, reducing heat and providing more holes per charge. Equipped with a ¼” Hex Shank, the Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. This kit includes (1) 1/8", (1) 5/32", (1) 3/16", (1) 1/4", (1) 5/16", (1) 3/8“, (1) 1/2" SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits. Packaged in a medium, single-sided hard case designed for use in PACKOUT™.

• Up to 5x life in concrete
• Up to 2x faster versus standard masonry bits
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• Durable carbide tip for longer life in concrete and hard aggregate
• Sharpened carbide edges for faster starts in concrete, brick, and block
• Precision ground carbide tip for less bit walking
• Case is designed for use in PACKOUTâ„¢
• Wide flute design for fast dust removal
• Ideal for concrete, brick, and block
• ¼’” hex shank for added tool versatility
• Kit includes (1) 1/8" x 2" x 3-1/2", (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6", (1) 1/2" x 4" x 6"

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 3/16" x 2" x 4" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: 1/4", 5/16", 3/8"
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE® Diamond Max™ 1/4 in. Hole Saw Bit delivers up to 20X longer life with unmatched cuts in porcelain. Diamond Max™ Hole Saws offer best-in-class performance with higher-grade diamonds and superior retention. Features Maximum wear resistance to tackle the most demanding applications. The improved diamond grit delivers faster cutting and quickly grips into material for clean, easy cuts. Designed for more cutting with less clogging.

• Unmatched cuts in porcelain
• Maximum diamond durability and retention
• Maximum diamond durability and retention
• Faster starts and less slipping
• More cutting, less clogging
• Dip bit in water before each cut
• 1/4 in. Hex Shank

The MILWAUKEE 3/16" Diamond MAX Hole Saw delivers up to 10X longer life when cutting tile, stone, and glass. Diamond MAX Hole Saws offer best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved continuous brazed edge provides clean, superior joint strength, and better diamond retention when cutting hard, abrasive materials. The One-Piece Hole Saw has a 1/4" quick-change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond MAX offers the lowest cost-per-hole on the market.

• Large Slug Ejection Slot: Offers easy plug removal
• Heat and fracture resistant
• Improved braze provides superior diamond retention
• Versatile: Ideal for cutting anchoring and clearance holes in all tile, stone and glass
• 1/4" Hex Shank
• Includes (1) 3/16" Diamond MAX Hole Saw

This Milwaukee Ice Hardened 2-1/2 in. Hole Saw is made of high-speed steel and will cut various materials. It requires a minimum chuck size of 1/2 in. and has a 1-4/5 in. drilling depth. Milwaukee Ice Hardened products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (marten site). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition.

• 1/2 in. minimum chuck size required
• Cuts 2-1/2 in. holes in various types of material
• 1-4/5 in. drilling depth
• Made of high-speed steel
• Includes: one 2-1/2 in. hole dozer bi-metal hole saw

Milwaukee Step Drill Bits with JAM-FREE Performance are optimized for Cordless Drills in High Speed. Featuring a dual-flute design delivering up to 2X faster whole times, up to 4X longer life and up to 50% more holes per battery charge than the competition. Ideal for drilling large and small-diameter holes in steel and plastic. The Rapid Strike tip allows for fast, accurate starts that generate less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, whole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling.

• Jam-free performance: dual-flute design optimized for cordless drills in high speed provides greater speed and control
• Rapid strike tip: creates fast, accurate starts and generates less heat
• Laser-engraved reference marks: easily stop on any whole size
• 3-flat secure-grip shank: reduces bit slippage in the chuck

The MILWAUKEE SHOCKWAVE 3" Impact Magnetic Drive Guide is engineered for extreme durability and up to 30x life. The magnetic drive guide features optimized Shockzones that absorb peak torque and prevent them from breaking. Each Custom Alloy76 Steel drive guide has a stainless steel sleeve that slides over the fastener for improved stability. The drive guide barrels have laser etched depth gauges for increased fastener control. The Milwaukee magnetic drive guide holds fasteners to the guide with a C-ring to retain the insert bit for maximum efficiency.

• Optimized Shockwave absorbs peak torque and prevents breaking
• Stainless Steel Sleeve extends for improved fastener stability
• Laser Etched Depth Gauge for increased fastener control
• Magnet holds fasteners to the drive guide
• C-ring retains the insert bit
• Custom Alloy76 Steel maximizes resistance to wear and shock
• Includes: (1) ECX Bit 1" #1, (1) ECX Bit 1" #2, (2) Phillips Bit 1" P2, (1) Phillips Bit 1" P3, (1) Slotted Bit 1" SL 1/4",(1) Slotted Bit 1" SL 3/16", (1) Square Bit 1" SQ2, (1) TORX Bit 1" T15, (1) TORX Bit 1" T20, (1) TORX Bit 1" T25, (1) SHOCKWAVE 3" Magnetic Bit Tip Holder
• Includes: (1) SHOCKWAVE 3" IMPACT DRIVE GUIDE

Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill bits provide up to 30% faster drilling speeds and up to 20% more holes per charge in cordless rotary hammers. Breaker Point pulverize the material more effectively resulting in up 30% faster drilling speeds compared to competitive SDS-Plus drill bits. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in brick, block, and concrete for cordless and corded rotary hammer users.

• Breaker points for up to 30% faster drilling speeds
• Variable flutes for up to 20% more holes per battery charge in cordless rotary hammers
• Rebar guards for increased durability in hard aggregate
• Reinforced Flutes to avoid bit breakage
• Centering tip for exact spot drilling
• Wear mark indicators to indicate end of life
• ANSI specified to fit common anchors

Milwaukee hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-7055 features a 7/16 in. hex shank, which can be used with any 7/16 in. extension. The 49-56-7055 also features a hollow shank to allow access to drive out stuck pilot bits.

• Durable hardened steel construction
• Fits all hole saws up to 1-3/16 in.
• Fits all drill chucks 1/2 in. and larger
• Milwaukee hole saw arbors are made from hardened carbon steel and alloy steel for greater durability

Milwaukee hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-6950 arbor drives from the 3-flat shank of the pilot bit, which won't slip in the chuck. Fits all drill chucks 1/4 in. and larger. Fits all hole saws up to 1-3/16 in.

• Durable hardened steel construction
• Fits all hole saws up to 1-3/16 in.
• Fits all drill chucks 1/4 in. and larger
• Milwaukee hole saw arbors are made from hardened carbon steel and alloy steel for greater durability

The MILWAUKEE® SHOCKWAVE™ Right Angle Adapter has a slim profile, providing access to tight areas. The internal SHOCKZONE™ hanks absorb peak torque and prevent breaking. Hardened gears increase torque transfer for increased durability. The Custom Alloy 76 Steel increases durability for use in the most demanding applications. The SHOCKWAVE™ Right Angle Adapter is designed for Impact Driver Driver Bits and Drill/Driver Driver Bits.

• Slim Profile
• Access in tight areas
• Hardened gears allow for increased torque transfer
• Magnet retains driver bit
• Ergonomic rubber over mold for added comfort during use
• For use with 1/4" hex shank accessories
• Designed for use with impact drivers and drill drivers

The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.

• Rip guard, the strongest tooth form in the industry
• Rip guard limited lifetime tooth break warranty
• Plug jack, an all access slot design for fast plug removal
• Bi-metal construction with 8% cobalt for increased wear resistance

Add the Milwaukee 7/16 in. Quick Change Arbor to your tool box. The arbor fits hole saws with a minimum 1-1/4 in. size and drill chucks with a minimum 1/2 in. size. The 49-56-7240 allows for a tool-free operation.

• Fits hole saws with minimum 1-1/4 in. size
• Fits drill chucks with minimum 1/2 in. size
• Hardened steel construction
• Hollow shank for pilot bit access

The DEWALT 8-Piece SAE Locking Hex Key Set comes with 8 SAE hex keys in various sizes. This hex key set features a locking mechanism for added torque. It can be folded closed with a simple push of the release button.

• Set includes 8 SAE hex keys in sizes 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in. and 1/4 in.
• Push the silver release button to adjust keys or fold the tool closed
• Locking mechanism fixes hex keys in place to help deliver maximum torque
• Hex keys lock at 90, 135 and 180
• Limited lifetime warranty
• Long lasting
• Durable construction

The MILWAUKEE® 5-Piece SHOCKWAVE Impact Duty™ Carbide Multi-Material Drill Bits are the most versatile bits, designed to tackle a variety of materials, including brick, block, concrete, steel, aluminum, ceramic tile, backerboard, wood, PVC, and drywall. The aggressive multi-grind carbide tip delivers up to 10x longer life in stacked materials and up to 85% faster drilling speeds in metal. Equipped with a 1/4" hex shank, these multi-purpose drill bits are compatible with impacts, drill/drivers, and hammer drills. These Milwaukee® general-purpose drill bits provide the ideal all-in-one solution for the widest variety of materials, tools, and applications. This kit includes (1) 5/32", (1) 3/16", (1) 1/4", (1) 5/16", and (1) 3/8" SHOCKWAVE Impact Duty™ Carbide Multi-Material Drill Bits.

• For use with brick, block, concrete, steel, aluminum, ceramic tile, backer-board, wood, PVC, and drywall
• Up to 85% faster in metal vs. standard masonry drill bits
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• Up to 10x longer life in stacked materials
• Use in hammer mode for faster drilling in masonry and concrete
• Durable carbide tip for a wide range of tough applications
• Ideal for drilling through layered materials
• Less bit changes for increased productivity
• ¼” hex shank for added tool versatility
• Not recommended for porcelain tile
• Kit Includes: (1) 5/32” x 6" (1) 3/16“ x 6" (1) ¼“ x 6" (1) 5/16“ x 6" and (1) 3/8” x 6"

The Milwaukee SDS-PLUS 4-Cutter MX4 5/16 in. X 4 in. X 6 in. Drill Bits feature solid carbide heads that deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. MX4 4-Cutter bits are designed with sharp centering tips for exact spot drilling in concrete and metal decking. The 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. Wear mark indicator shows users the end of life when the bits no longer meet the ANSI requirement. The Milwaukee MX4 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.

• 4-cutter design prevents lock-up in rebar, reducing downtime
• Variable flutes remove dust faster reducing heat & delivering up to 20% more holes per battery charge
• German made
• Meets ANSI B212.15 to fit common anchors
• Wear mark indicator to show end of life and when bit no longer meets the ANSI requirement
• Ideal for concrete with rebar and masonry
• Fits all SDS-PLUS rotary hammers