The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 1/4" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

The Milwaukee 48-00-5188 9 in. x 18 Teeth per in. Thin Kerf metal-cutting Blade with the Double Duty Upgrade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck is engineered to protect against tang breakage and delivers the strongest SAWZALL blade tang on the market. Maintaining a short profile and thin body, these Blades are ideal for making fast, flexible cuts. The Milwaukee 48-00-5188 contains 5 Blade.

• Optimized tooth design providing 2X more life than our previous generation SAWZALL blade
• SAWZALL blade tough neck ribs strengthen the blade tang and minimize breakage
• Matrix II bi-metal teeth for greater durability
• Material, blade geometry and heat treating are designed to maximize metal cutting performance
• Includes 5 blades

The MILWAUKEE® TORCH™ with NITRUS CARBIDE™ SAWZALL® Blade for Cast Iron and other thick metals delivers the fastest cutting, and longest life with a breakthrough Carbide Technology. These NITRUS CARBIDE™ reciprocating saw blades are engineered to dissipate heat better than any other demolition blade for faster cutting​. The TORCH™ with NITRUS CARBIDE™ for Cast Iron delivers 5x life versus carbide teeth blades in cast iron. This 8TPI blade is ideal for the fastest, smoothest cuts in hard cast iron, stainless steel, black pipe, rebar, & angle iron​.

• For The Toughest Cast Removals.
• NITRUS delivers the fastest cutting, longest life products with a breakthrough Carbide Technology
• Our NITRUS Carbide blades are engineered to dissipate heat better than any other demolition blade for faster cutting​.
• 5x life versus carbide teeth blades in cast iron​
• Fastest, Smoothest cuts in cast iron​
• Optimized Performance in, hard cast iron, stainless steel, black pipe, rebar, & angle iron​
• 8 TPI design for fast, smooth cutting in cast iron and other thick metals​
• Large tooth gullets for easy material ejection​
• ½” Universal Tang​
• Made in USA​
• Available in 6", 9" and 12" lengths in 1PKs, 3PKs, and 5PKs
• Includes: (1) 9" 8TPI TORCH W/ NITRUS Carbide SAWZALL Blade

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 3/16" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

Diablo’s next generation framing saw blades feature industry leading technology for optimum performance and control in cordless saws. The combination of Diablo’s specially formulated TiCo Hi-Density carbide and a Chamfer Alternate Top Bevel tooth geometry delivers maximum life and durability for up to five times longer life, two times more durability and 30% more cuts per charge. The super-thin laser cut kerf design optimizes the efficiency of the blade in cordless and corded saws. This next generation framing saw blade is ideal for framers, roofers, remodelers, concrete formers or anyone wanting ultimate cutting performance in pressure treated wood, 2x lumber, plywood, hardwoods and softwoods.

• Diablo made TiCo Hi-Density carbide for maximum performance and up to 5X longer cutting life
• Chamfer Alternate Top Bevel (ATB) tooth geometry for ultimate tracking control
• Twice the carbide surface area for greater impact resistance and double the durability in nail-embedded wood
• Superior cutting efficiency in cordless and corded saws by offering up to 30% more cuts per battery charge versus other blades
• Enhanced anti-vibration design provides the ideal combination of stability and rigidity
• Perma-SHIELD non-stick coating protects the blade against heat, gumming and corrosion
• Compatible with any 6-1/2in. corded or cordless circular saw
• Cut hardwood, 2x lumber, pressure treated, OSB and laminated beams

• Self-Flaring, No Special Tools Needed
• Solid Brass Fitting with Stainless Steel Insert
• Includes Split Ring
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Made of high-grade brass for enhanced strength
• Self-flaring construction requires no tool to ensure versatile use
• Includes split ring for a secure fit
• Ideal replacement for a damaged or worn-out autoflare 3/4 x 1/2 in. fitting

The Avanti 7-1/4 in. x 24-Tooth Framing Circular Saw Blade is an economical, high-performance blade that can be sharpened when needed to extend its service life. The high-quality steel is manufactured with carbide and lasts up to 30 times longer than regular steel blades. It is designed for DIY projects and construction use and is ideal for softwood, pressure-treated beams and oriented-strand board (OSB).

• Replacement blade for circular saws, recommended for DIY projects and construction use
• Ideal for softwood, pressure-treated beams and OSB
• Made of high-quality steel with carbide reinforcement for toughness and durability
• Economical yet high performance, can be sharpened to extend life

The Milwaukee 48-00-5184 6 in. x 18 TPI Thin Kerf metal-cutting blades with the Double Duty Upgrade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck is engineered to protect against tang breakage and delivers the strongest SAWZALL blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts. The Milwaukee 48-00-5184 contains 5 Reciprocating Saw blades.

• Optimized tooth design providing 2X more life than our previous generation SAWZALL blades
• SAWZALL blades tough neck ribs strengthen the blade tang and minimize breakage
• Matrix II bi-metal teeth for greater durability
• Ideal for cutting conduit tubing, channels and pipe
• Includes 5-blades

The Next Generation Wrecker is designed for Multi-Material demolition cutting. This mean it has the capability of cutting nail embedded wood, plastics and a variety of metals. This blade has 25% more high speed steel for increase life and durability. With all of these features, the Next Generation Wrecker is a true demoliton blade for the professional user.

• Optimized to be a true demolition blade for cutting nail enbedded wood, plastics and metals
• Hardened teeh for increased life in nail embedded wood and thick metals
• 7/11 TPI for a wide material variety to be true demolition blades
• New blade profile with the ability to bend and maintain its shape
• Nail protecting feature built into the tooth design
• Aggressive tooth and blade design for increased speed in woods and metals
• Blade profile optimized for fast plunging

The MILWAUKEE SHOCKWAVE Impact Duty 45PC Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT.

• WEAR GUARD TIP protects fit over the life of the bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble
• SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Up to 50X Life vs other impact bits
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Designed for use with Impact Drivers and Drill Drivers

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: 1/4 in. , 5/16 in. , 3/8 in. , 7/16 in.
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE SHOCKWAVE Impact Duty Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76 steel to control hardness for extended bit life. The optimized SHOCK ZONE absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.

• Impact Duty Magnet prevents magnet loosening over time
• Magnetic nut driver holds screws securely during application set-up
• Optimized SHOCK ZONE absorbs peak torque and prevents breakage
• Color-coded bands aid with selecting the right size nut driver
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Chamfered edge for maximum screw-head engagement
• Improved hex geometry for best fit and reduced stripping
• Designed for heavy-duty impact applications
• Designed for use with Impact Drivers and Drill Drivers
• Includes: (1) SHOCKWAVE 1/4 X 1-7/8 IMPACT MAGNETIC NUT DRIVER
• Impact Duty Magnet prevents the magnet from loosening over time
• Magnetic nut driver securely holds screws during set-up
• Optimized SHOCK ZONE absorbs peak torque & prevents bit breakage

The MILWAUKEE SHOCKWAVE Impact Duty 23PC RED HELIX Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat leading to improved performance. Designed with a VARIABLE HELIX flute that begins with an aggressive 35° helical angle and ends at 15° for rapid chip removal. The bits also feature an internal thicker tapered web that greatly increases strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals. MILWAUKEE RED HELIX Titanium Drill Bits provide up to 5X life vs. black oxide drill bits. The set is organized in a customizable accessory case designed for use in PACKOUT.

• RED HELIX Technology combines QUAD EDGE tip, VARIABLE HELIX flute, and thicker tapered web
• QUAD EDGE Tip stays sharper longer
• VARIABLE HELIX flute designed for rapid chip removal
• Thicker tapered web design increases bit strength
• Titanium Coated for 5X Life vs. Black Oxide Drill Bits
• 1/4" hex shank for use with Impact Drivers and Drill Drivers
• Ideal for Metal, Wood, & Plastics
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Customizable accessory case is designed for use in PACKOUT
• Includes: (2)1/16" , (2)5/64" , 3/32", (2)7/64" , (2)1/8" , 9/64", (2)5/32" , 11/64", (2)3/16" , 13/64", 7/32", (2)1/4" , 5/16", 3/8", 1/2" Bits, Carrying Case

The MILWAUKEE OPEN-LOK Multi-Material Multi-Tool Blade Variety Pack 3PC provides you with an assortment of optimal cutting performance in multi-material applications like screws, nails, wood, cement board, plaster, PVC, drywall, and more. The Carbide Teeth blade lasts up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining a longer blade life. The thin kerf design and aggressive Carbide Teeth offer faster cuts and better cutting performance in wood or wood with embedded fasteners. TITANIUM CHARGED Bi-Metal blades have an optimized titanium blend for maximum wear-resistance and up to 15x longer life vs. high carbon steel (HCS) blades. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• Carbide Teeth for up to 50x longer life vs bi-metal blades
• Unique Aggressive Carbide Teeth for faster cuts
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• TITANIUM CHARGED bi-metal for up to 15X Longer Life vs High Carbon Steel Blades
• TITANIUM CHARGED bi-metal blades utilize an optimized titanium blend for maximum wear-resistance and longer life
• For use in Multi-Material applications: wood, screws, nails, cement board, plaster, and more
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• Includes: (1) OPEN-LOK 1-3/8" Carbide Teeth Multi-Material Multi-Tool Blade, (1) OPEN-LOK 1-3/8" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade, (1) OPEN-LOK 2-1/2" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade

The Milwaukee 48-20-7401 is a 5/32 in. 6 in. Carbide 2-Cutter SDS Bit. Milwaukee's 44 Magnum series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through re-bar and mesh. The distinctive chisel shaped tip breaks concrete quickly for faster penetration. The 4-fluted spiral shaft has improved dust removal resulting in less bending stresses. Available in diameters from 5/32 in. to 5/8 in.

• 5/32 in. Dia
• SDS shank
• 2-cutter head
• 4 in. drilling depth
• 6 in. overall length
• Carbide construction
• Quadruple-fluted shaft easily channels away dust and debris for fast work

The M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. This battery provides increased power in extreme cold weather conditions (below 0 degree F/minus 18 degree C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUM HIGH OUTPUT XC6.0 battery is fully compatible with 250+ M18 solutions.

• REDLINK intelligence: our battery circuitry provides optimized performance and overload protection using Total system communication between tool, battery and charger
• Best-in-class construction: offers long-lasting performance and the best protection against jobsite, weather and environmental conditions
• Fuel gauge onboard: displays remaining run-time
• Versatility: powers all 200 plus M18 cordless solutions
• Compatible with all M18 tools
• 3-year battery warranty
• Includes: 2 M18 REDLITHIUM HIGH OUTPUT XC 6.0 Ah battery packs

The MILWAUKEE® OPEN-LOK™ 1-3/8" Carbide Teeth Metal Oscillating Multi-Tool Blades are designed for metal cutting in screws, bolts, nails, and more. Carbide Teeth blades last up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining longer blade life. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.

• Carbide Teeth for up to 50x longer life vs bi-metal blades
• TITANIUM ENHANCEDâ„¢ to extend blade life
• Reinforced Universal Fit OPEN-LOKâ„¢ anchor for better strength & control
• Universal Fit OPEN-LOKâ„¢ Anchor fits all major brands of non-starlock tools
• For use in Metal applications: screws, bolts, metal pipe, nails, and more
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• 1-3/8" Cutting Width
• 1-1/2" Max Plunge Depth
• 3 Pack
• Includes: one 49-25-1503-1-3/8 in. carbide teeth metal blade 3-pack
• Includes: (3) 1-3/8" TITANIUM CARBIDE TEETH METAL BLADES

The Milwaukee SDS-PLUS 4-Cutter MX4 5/16 in. X 4 in. X 6 in. Drill Bits feature solid carbide heads that deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. MX4 4-Cutter bits are designed with sharp centering tips for exact spot drilling in concrete and metal decking. The 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. Wear mark indicator shows users the end of life when the bits no longer meet the ANSI requirement. The Milwaukee MX4 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.

• 4-cutter design prevents lock-up in rebar, reducing downtime
• Variable flutes remove dust faster reducing heat & delivering up to 20% more holes per battery charge
• German made
• Meets ANSI B212.15 to fit common anchors
• Wear mark indicator to show end of life and when bit no longer meets the ANSI requirement
• Ideal for concrete with rebar and masonry
• Fits all SDS-PLUS rotary hammers

Diablo's Finish Saw Blade for Wood is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades create thin swaths for material removal and fast, effortless operation. Crafted with TiCo Hi-Density carbide and featuring a hardened steel body with Perma-SHIELD Non-stick Coating, these blades are great choice for jobsite finish cuts.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Hardened Steel Body - warrants a longer life and sharper cutting edge
• Compatible with any 7-1/4in. corded or cordless circular saw
• Laser-cut heat expansion slots foster true and straight cutting
• Fashioned with 5/8in. laser-cut arbor for accurate blade rotation

The MILWAUKEE SHOCKWAVE Impact Duty 18PC Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT.

• WEAR GUARD TIP protects fit over the life of the bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble
• SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Up to 50X Life vs other impact bits
• Laser etched size for easy identification
• Customizable accessory case is designed for use in PACKOUT
• Designed for use with Impact Drivers and Drill Drivers

Super Sawzall blades are made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade we make. This blade has a 1/2 in. universal tang that fits all Sawzalls and standard competitive saws. Includes 5 individual blades.

• Nail guard solves this trade-off between speed and durability with an aggressive 5 TPI pattern for faster cuts and a unique design that protects against tooth fracture
• Fang tip ordinary tips bounce or skate on the work piece; fang tip bites into the wood on first contact
• Matrix II bi-metal teeth for greater durability
• Engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood blade on the market
• For very fast cutting in nail embedded wood and general roughing-in work
• 5 blades
• Universal tang that fits all sawzalls and standard competitive saw

The MILWAUKEE OPEN-LOK All-Purpose Oscillating Multi-Tool Blade Variety Pack 3PC provides you with an assortment of blades in the three most common cutting applications: metal, wood & nails, and hardwood. The set includes a Carbide Teeth metal blade that lasts up to 50X longer than standard bi-metal blades and can be used in a wide range of metal materials while maintaining longer blade life such as; screws, bolts, nails, and more. The TITANIUM CHARGED Bi-Metal blade has an optimized titanium blend for maximum wear-resistance and up to 15x longer life vs. high carbon steel (HCS) blades. The bi-metal multi-tool blade is ideal for wood with nails, PVC, and drywall. The Triple-Ground Japanese Tooth hardwood blade delivers up to 2X faster cuts than the previous Milwaukee HCS blade and features a PRO-CURVE cutting edge for greater control. The Japanese Tooth blade is ideal for fast, clean cuts in hardwood and can also be used in clean wood, PVC, and drywall. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• Carbide Teeth for up to 50x longer life vs bi-metal blades
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• TITANIUM CHARGED bi-metal for up to 15X Longer Life vs High Carbon Steel Blades
• TITANIUM CHARGED bi-metal blades utilize an optimized titanium blend for maximum wear-resistance and longer life
• PRO-CURVE cutting edge for greater control
• Triple-ground, flame-hardened Japanese Teeth for fast and clean cuts in hardwood
• For use in Multi-Material applications: wood, nails, PVC, and drywall
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• Includes: (1) OPEN-LOK 1-3/8" Carbide Teeth Metal Multi-Tool Blade, (1) OPEN-LOK 1-3/8" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade, (1) OPEN-LOK 1-3/8" HCS Japanese Tooth PRO-CURVE Hardwood Multi-Tool Blade

Lithium battery

• 6 volt
• Non-rechargeable

The MILWAUKEE SHOCKWAVE 3/8" Impact Duty Socket Adapters transform the user's impact socket wrench into an impact driver with square hex bits for every application. The Impact Duty Socket Adapters are made from proprietary steel and heat treated to control hardness and provide extreme durability and up to 30X life. The hex bits withstand frequent use and save users the expense of having to buy separate drill drivers. Compatible with 1/4" square input drives, it allows users to utilize any 3/8" hex bit for a variety of tightening and unscrewing tasks.

• Custom Alloy76 Steel is engineered to extend bit life
• Proprietary steel and heat treated for maximum strength and durability
• Heavy duty construction for fastening capabilities in all impacts
• Optimized Shockzone absorbs peak torque and prevents breaking
• Includes: (1) SHOCKWAVE 3/8" IMPACT SOCKET ADAPTER

Milwaukee M18 REDLITHIUM FORGE HD12.0 Battery Pack 50% More Power Vs High Output Hd12.0 COOL-CYCLE Active Cooling System provides high-speed cooling for less downtime with COOL-CYCLE capable chargers 35min Supercharge to 80% with the M18 Dual Bay Simultaneous Super Charger REDLITHIUM FORGE provides the most powerful, fastest charging, and longest life batteries within REDLITHIUM Fully compatible with the M18 system, featuring 250+ tools Patented ingress coating provides increased protection to maximize active cooling through an upgraded venting design Best protection from jobsite, weather and environmental conditions PWR Level 5 on the REDLITHIUM Power scale Resistant housing designed to provide increased protection against exposure to common oils, greases, and solvents REDLINK Intelligence: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger Enhanced onboard fuel gauge with improved readability in direct sunlight 3-year battery warranty Includes: (1) M18 REDLITHIUM FORGE HD12.0 Battery Mfg #48-11-1813

• 50% More Power Vs High Output Hd12.0
• COOL-CYCLE Active Cooling System provides high-speed cooling for less downtime with COOL-CYCLE capable chargers
• 35min Supercharge to 80% with the M18 Dual Bay Simultaneous Super Charger
• REDLITHIUM FORGE provides the most powerful, fastest charging, and longest life batteries within REDLITHIUM

The MILWAUKEE 1/4" SHOCKWAVE RED HELIX Titanium Drill Bit is engineered for extreme durability and long life. The QUAD EDGE tip delivers a precision start and four cutting edges to create smaller chips for faster removal and less heat leading to longer bit life. Designed with a Variable Helix that includes an aggressive 35 degree helical angle, which ends at 15 degree , the tapered drill bit with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The bit also features an internal ENHANCED TAPERED WEB that greatly increases its strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals, Milwaukee Red Helix Titanium Drill Bits provide up to 5X life vs. black oxide drill bits.

• 5X Life vs. Black Oxide Drill Bits
• 1/4" Hex Shank. Use in Drills or Impact Drivers
• SHOCKWAVE Impact Duty Bits
• 135 degree Split Point Tip
• Titanium Coated for longer life
• Ideal for Wood, Plastics, & Metals
• Available in 29 fractional sizes
• Includes: (1) 1/4" SHOCKWAVE RED HELIX Titanium Drill Bit

Milwaukee designs and manufactures SAWZALL blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize cutting performance in nail embedded wood. Blade includes Matrix II bi-metal teeth for greater durability. Furthermore, precision forming process creates sharper teeth for fast cutting and double relief angle reduces tooth stress for long life. Includes 5 individual blades.

• Double relief angle reduces tooth stress for long life
• Precision forming process creates sharper teeth for fast cutting
• Matrix II bi-metal teeth for greater durability
• Material, blade geometry and heat treating are designed to maximize general purpose cutting performance
• 1/2 in. universal tang that fits all SAWZALLS and standard competitive saws
• Length: 8 in.
• 8% cobalt to keep a sharper tooth edge longer

The MILWAUKEE OPEN-LOK Multi-Tool Blade Variety Kit 5PC provides you with an assortment of blades for multi-material, hardwood, and clean wood cutting applications. The set includes TITANIUM CHARGED Bi-Metal blades with an optimized titanium blend for maximum wear-resistance and up to 15x longer life vs. high carbon steel (HCS) blades. The bi-metal multi-tool blades are ideal for wood with nails, PVC, and drywall. The Triple-Ground Japanese Tooth hardwood blade delivers up to 2X faster cuts than the previous MILWAUKEE HCS blade and features a PRO-CURVE cutting edge for greater control. The Japanese Tooth blade is ideal for fast, clean cuts in hardwood and can also be used in clean wood, PVC, and drywall. The set also includes high carbon steel (HCS) blades designed with aggressive, edge-ground teeth for fast wood cutting. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. The set is organized in a hard case for compact and convenient storage. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• TITANIUM CHARGED bi-metal for up to 15X Longer Life vs High Carbon Steel Blades
• TITANIUM CHARGED bi-metal blades utilize an optimized titanium blend for maximum wear-resistance and longer life
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• PRO-CURVE cutting edge for greater control
• Triple-ground, flame-hardened Japanese Teeth for fast and clean cuts in hardwood
• Cut-Away Blade Body Shape For Fast Plunge Cuts
• High Carbon Steel (HCS) wood blade for cuts in clean wood, drywall, & pvc
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• The set is organized in a hard case for compact and convenient storage
• Includes: (1) OPEN-LOK 1-3/8" HCS Japanese Tooth PRO-CURVE Hardwood Multi-Tool Blade, (2) OPEN-LOK 1-3/8" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade, (2) OPEN-LOK 1-3/8" HCS Wood Multi-Tool Blade, (1) Storage Case

The MILWAUKEE® OPEN-LOK™ 1-3/8" Carbide Teeth Multi-Material Oscillating Multi-Tool Blades have a unique aggressive tooth design for cutting wood, screws, nails, cement board, plaster, and more. Carbide Teeth blades last up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining longer blade life. The thin kerf design and aggressive Carbide Teeth offer faster cuts and better cutting performance in wood or wood with embedded fasteners. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.

• Carbide Teeth for up to 50x longer life vs bi-metal blades
• Unique Aggressive Carbide Teeth for faster cuts
• Reinforced Universal Fit OPEN-LOKâ„¢ anchor for better strength & control
• Universal Fit OPEN-LOKâ„¢ Anchor fits all major brands of non-starlock tools
• TITANIUM ENHANCEDâ„¢ to extend blade life
• For use in Multi-Material applications: wood, screws, nails, cement board, plaster, and more
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• 1-3/8" Cutting Width
• 1-1/2" Max Plunge Depth
• 3 Pack
• Includes: one 49-25-1523-1-3/8 in. carbide teeth wood blade 3-pack
• Includes: (3) 1-3/8" TITANIUM CARBIDE TEETH MULTI-MATERIAL BLADES

This 45 PC. Screwdriving Bit Set contains a variety of screw bit sizes and geometries for the most common uses. Two Nut Drivers are included along with a Magnetic Drive Guide that helps to reduce the stripping and wobbling of screws. These bits are ideal for use in a drill driver.

• Includes the most commonly used screwdriver accessories
• Optimized fastener fitment on number 2 Philips bits
• Double-ended 1 in. bit for extended bit life
• Titanium Nitride coated torsion bits for durability for heavy-duty fastening
• ABS tough case for protection and convenient storage
• Magnetic drive guide reduces wobble

These Thin Kerf SAWZALL Reciprocating Blades are fashioned with Tough Neck ribs designed to strengthen the blade tang and minimize breakage, giving your machine superb metal-cutting ability. Double Duty tooth construction makes these 6 in. 24 TPI blades highly resilient in rugged applications, delivering straight, controlled cuts on the stiffest metals. A thin body and short profile deliver fast, flexible cuts on beams, pipes, bolts and more.

• Double duty upgrade optimized tooth design offers utmost sharpness and wear resistance
• Thin kerf metal-cutting blades have a narrow body and short profile for effortless operation
• Tough neck ribs strengthen blade tang and minimize breakage
• Bi-metal construction withstands heavy-duty use in rigorous applications
• Ideal for demolition, plumbing, remodeling and general metal cutting

Milwaukee SHOCKWAVE Impact Duty Drill & Drive Set, 60 Piece Wear Guard Tip Protects Fit Over The Life Of The Bit Optimized SHOCK ZONE absorbs peak torque and prevents breaking CUSTOM ALLOY76 Steel is engineered to extend bit life Precise fit, custom machined tip prevents stripping and reduces wobble SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types Laser hardening at the tip creates an outer protective shield for improved wear resistance Customized geometry and heat treatment per tip type for best performance across tip types Up to 50X Life vs other impact bits Titanium Coated Drill bits for 5X Life vs. Black Oxide Laser etched size for easy identification Includes SHOCKWAVE Impact Duty nut drivers with the most durable magnet for longer life in tough applications Designed for use with Impact Drivers and Drill Drivers Customizable accessory case is designed for use in PACKOUT Mfg #48-32-4097

• Wear Guard Tip Protects Fit Over The Life Of The Bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble

Milwaukee M18 REDLITHIUM FORGE XC8.0 Battery Pack Delivers High Output 12.0 Power In A Smaller Size And Lighter Weight COOL-CYCLE Active Cooling System provides high-speed cooling for less downtime with COOL-CYCLE capable chargers 35min supercharge to 80% with the M18 Dual Bay Simultaneous Super Charger Longest life for the most recharges and best performance over the life of the pack REDLITHIUM FORGE provides the most powerful, fastest charging, and longest life batteries within REDLITHIUM Fully compatible with the M18 system, featuring 250+ tools Patented ingress coating provides increased protection to maximize active cooling through an upgraded venting design Best protection from jobsite, weather and environmental conditions PWR Level 4 on the REDLITHIUM Power scale Resistant housing designed to provide increased protection against exposure to common oils, greases, and solvents REDLINK Intelligence: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger Enhanced onboard fuel gauge with improved readability in direct sunlight 3-year battery warranty Includes: (1) M18 REDLITHIUM FORGE XC8.0 Battery Pack Mfg #48-11-1881

• Delivers High Output 12.0 Power In A Smaller Size And Lighter Weight
• COOL-CYCLE Active Cooling System provides high-speed cooling for less downtime with COOL-CYCLE capable chargers
• 35min supercharge to 80% with the M18 Dual Bay Simultaneous Super Charger
• Longest life for the most recharges and best performance over the life of the pack

The Milwaukee Super SAWZALL the AX 6 in. x 5/8 TPI Wood Reciprocating Saw Blades (5-Pack) feature bi-metal construction to help prevent the blades from bending. Slope-shaped blades. Heat-treated.

• 1/2 in. universal tang fits all SAWZALLs
• Bi-metal construction
• 5/8 teeth per in.
• Ideal for plunge-cutting into wood and nail-embedded wood

Super SAWZALL blades are made with Matrix II high speed steel teeth containing 8% cobalt to Keepa sharper tooth edge for a longer lasting and more durable use. The tough bi-metal design allows for faster cutting, sturdier blades that can bend without shattering. Milwaukee designs and manufactures SAWZALL blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. This 5-pack of 9 in. 5 TPI SAWZALL Reciprocating Saw Blades have a 1/2 in. universal tang that fits all SAWZALL and standard competitive saws.

• 1/2 in. universal tang fits SAWZALL and other standard saws
• Matrix II bimetal teeth offer great durability
• 5 TPI
• Ideal for fast cutting in nail-embedded wood and general rough-in work
• Fang tip bites into wood on first contact
• Nail guard teeth help deliver speed and strength
• 3/64 in. T
• Includes: 9 in. 5 TPI wood cutting SAWZALL reciprocating saw blades (5-pack)

Milwaukee auger bits are designed for electricians, plumbers, utilities and any trade requiring fast, clean holes in wood. The double wing spurs continually scribe the hole producing smooth holes without breakout. The flutes are coated, which produces a non-stick surface for fast and smooth chip ejection. The shanks are also impact rated for added durability and versatility no matter the trade.

• Steel construction for strength
• Induction-hardened tip provides nail durability
• Coated flutes for quick chip removal
• Self-feeding screw point
• Impact-rated shank
• Includes: 7/8 in. x 18 in. ship auger bit

Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill bits provide up to 30% faster drilling speeds and up to 20% more holes per charge in cordless rotary hammers. Breaker Point pulverize the material more effectively resulting in up 30% faster drilling speeds compared to competitive SDS-Plus drill bits. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in brick, block, and concrete for cordless and corded rotary hammer users.

• Breaker points for up to 30% faster drilling speeds
• Variable flutes for up to 20% more holes per battery charge in cordless rotary hammers
• Rebar guards for increased durability in hard aggregate
• Reinforced Flutes to avoid bit breakage
• Centering tip for exact spot drilling
• Wear mark indicators to indicate end of life
• ANSI specified to fit common anchors

The Milwaukee 3-Piece SHOCKWAVE Impact Hex Shank Socket Adapter Set is engineered for extreme durability and up to 30X life. The SHOCKWAVE Impact Duty Socket Adapters are made from proprietary steel and heat treated to control hardness. The optimized Shockzone absorbs peak torque and prevents breaking for secure fastening capabilities in all impacts. This tool set includes one 1/2 in. Socket Adapter, one 1/4 in. Socket Adapter and one 3/8 in. Socket Adapter.

• Custom Alloy76 Steel is engineered to extend bit life
• Proprietary steel and heat treated for maximum strength and durability
• Heavy-duty construction for fastening capabilities in all impacts
• Optimized Shockzone absorbs peak torque and prevents breaking
• Includes: one 1/4 in. socket adapter, one 3/8 in. socket adapter, one 1/2 in. socket adapter
• Includes: one) 1/4 in. socket adapter, one 3/8 in. socket adapter, one 1/2 in. socket adapter

The MILWAUKEE SHOCKWAVE Impact Duty 50PC Drill & Drive Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT.

• WEAR GUARD TIP protects fit over the life of the bit
• Optimized SHOCK ZONE absorbs peak torque and prevents breaking
• CUSTOM ALLOY76 Steel is engineered to extend bit life
• Precise fit, custom machined tip prevents stripping and reduces wobble
• SHOCK ZONES are optimized in both length and width across all tip types for best performance across tip types
• Laser hardening at the tip creates an outer protective shield for improved wear resistance
• Customized geometry and heat treatment per tip type for best performance across tip types
• Up to 50X Life vs other impact bits
• Titanium Coated Drill bits for 5X Life vs. Black Oxide
• Laser etched size for easy identification
• Includes SHOCKWAVE Impact Duty nut drivers with the most durable magnet for longer life in tough applications
• Designed for use with Impact Drivers and Drill Drivers
• Customizable accessory case is designed for use in PACKOUT

Our M12 REDLITHIUM HIGH OUTPUT XC5.0 delivers 25% more power and runs 25% cooler vs our other M12 REDLITHIUM XC battery packs. The increase in power elevates the performance of the entire M12 system and drives the next breakthrough in M12 FUEL. The lithium-ion battery delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Each battery pack is durably built for heavy-duty use, runs cooler and performs in climates below 0°F/-18°C. In addition, the M12 REDLITHIUM HIGH OUTPUT XC5.0 is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The M12 REDLITHIUM HIGH OUTPUT XC5.0 is fully compatible with 125+ M12 solutions.

• REDLINK intelligence: our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger
• Best-in-class construction: resistant housing designed to provide increased protection against exposure to common oils, greases, and solvents
• All-weather performance: delivers fade free power in extreme jobsite conditions
• Versatility: powers more than 125+ Milwaukee cordless power tools
• 3-year warranty
• Includes: (1) 48-11-2450 M12 REDLITHIUM HIGH OUTPUT XC5.0 battery pack

The MILWAUKEE SHOCKWAVE 6" Phillips #2 Impact Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Phillips bits feature Wear Guard Tip for increased wear resistance which protects the fit over the life of the bit. The impact driver bits have and optimized Shockzone for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 is customized and heat treated per tip type to extend the life of the driver but by up to 50X vs. competitive impact driver bits. The SHOCKWAVE Impact Duty driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Custom Alloy76 Steel is engineered to extend bit life
• Up to 50X life vs other impact bits
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Laser etched size for easy identification
• Design for use with impact drivers and drill drivers
• Includes: (1) SHOCKWAVE 6" PH2 IMPACT BIT

The Milwaukee 9 in. x 10 TPI Torch metal-cutting blades with the Double Duty Upgrade feature a tooth form optimized for the longest life and maximum durability. The tough neck is engineered to protect against tang breakage and delivers the strongest SAWZALL blade tang on the market. The grin iron features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL blade on the market. Ideal for making tough, straight cuts, these ice-hardened blades are cryogenically treated for up to 50% longer life.

• Optimized tooth design provides 2X more life than the previous generation SAWZALL blades
• SAWZALL blades tough neck ribs strengthen the blade tang and minimize breakage
• Matrix II bi-metal teeth for greater durability
• Grid iron honeycomb pattern increases blade rigidity to resist blade buckling
• Ideal for demolition, plumbing, remodeling and general metal cutting, cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood and steel
• Includes 5 blades

The Milwaukee 1/4 in. Tile and Natural Stone Drill Bit delivers up to 2X longer life in granite, stone, ceramic tile and glass. Hammer mode capability provides faster drilling speeds when drilling natural stone tiles, like granite and marble. Equipped with an aggressive 8-grind carbide head, these bits deliver up to 20% faster drilling. The bit's reinforced tip protects the carbide head, providing the durability needed for use in hammer drill mode. Milwaukee Tile and Natural Stone Bits can be used in drill-only mode or hammer drill-mode and are not recommended for porcelain tile.

• For use with glass, tile, ceramic, granite, marble, limestone, slate and stone
• Reinforced tip for maximum durability
• Precision-ground carbide for clean holes
• Round shank
• For use in hammer drill drivers
• Not recommended for porcelain tile
• Available in sizes up to 1/2 in.
• Includes: one 48-20-8992 - 1/4 in. natural stone bit

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits use sharpened carbide to deliver up to 5x longer life in concrete and up to 2x faster drilling into masonry material. Engineered with a precision ground tip, these hammer drill bits deliver faster starts and less walking in concrete, brick, and block. The wide flute design removes dust faster, reducing heat and providing more holes per charge. Equipped with a ¼” Hex Shank, the Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. This kit includes (1) 1/8", (1) 5/32", (1) 3/16", (1) 1/4", (1) 5/16", (1) 3/8“, (1) 1/2" SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits. Packaged in a medium, single-sided hard case designed for use in PACKOUT™.

• Up to 5x life in concrete
• Up to 2x faster versus standard masonry bits
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• Durable carbide tip for longer life in concrete and hard aggregate
• Sharpened carbide edges for faster starts in concrete, brick, and block
• Precision ground carbide tip for less bit walking
• Case is designed for use in PACKOUTâ„¢
• Wide flute design for fast dust removal
• Ideal for concrete, brick, and block
• ¼’” hex shank for added tool versatility
• Kit includes (1) 1/8" x 2" x 3-1/2", (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6", (1) 1/2" x 4" x 6"

The Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100.

• Rip Guard, the strongest tooth form in the industry
• Plug Jack, an all access slot design for fast plug removal
• Rip Guard limited lifetime tooth break warranty
• Bi-metal construction with 8% cobalt for increased wear resistance

The Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100.

• Rip Guard, the strongest tooth form in the industry
• Plug Jack, an all access slot design for fast plug removal
• Rip Guard limited lifetime tooth break warranty
• Bi-metal construction with 8% cobalt for increased wear resistance

The MILWAUKEE OPEN-LOK 1-3/8" HCS Wood Oscillating Multi-Tool Blades are made from premium high carbon steel with edge ground teeth for fast wood cutting. Designed for optimal cutting performance in wood, PVC, drywall, and other soft materials. The MILWAUKEE HCS Wood blades feature more teeth and an increased 1-3/8" cutting width for a deeper plunge cut than previous generation wood blades. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• High Carbon Steel (HCS) for cuts in clean wood, drywall, & pvc
• Aggressive tooth design for fast cuts
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• 1-3/8" Cutting Width
• 2" Max Plunge Depth
• 3 Pack
• Includes: (3) 1-3/8" HCS WOOD BLADES

SHOCKWAVE Impact Driver Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip delivers increased wear resistance which protects the fit over the life of the bit. The Shockzone is optimized for for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 has a customized steel and heat treatment per tip type to extend the life of the driver bits, providing up to 50X life vs. competitive impact driver bits. SHOCKWAVE driver bits are built to deliver extreme durability for the most demanding applications.

• Wear Guard Tip protects fit over the life of the bit
• Optimized Shockzone absorbs peak torque and prevents breaking
• Custom Alloy76 Steel is engineered to extend bit life
• Precise Fit Custom Machined Tip prevents stripping and reduces wobble.
• Shockzones are optimized in both length and width per tip type for best performance across tip types.
• Laser hardening at the tip creates an outer protective shield for improved wear resistance.
• Customized geometry and heat treatment per tip type for best performance across tip types
• Includes: 10PC Torx Security Insert Bits: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40