1/2" Tin handle acid brush with 6" handle

The product is high-quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High-quality
• Reliability
• Durability
• Attractive styling

The full hollow shaft design facilitates work on stacked circuit boards or other long bolt or stud applications. Klein's exclusive Cushion-Grip handle offers greater torque and outstanding comfort. The patented Tip- Ident quickly identifies nut driver and size.

• Reaches into deep recesses and fits over extra-long bolts and studs
• Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
• Internal flanges provide solid, twist-resistant shaft anchor
• Premium chrome plated for smooth feel and corrosion resistance
• Made in USA
• Meets or exceeds applicable ASME / ANSI specifications
• Handle end is also color coded for easy identification
• Cushion-Grip handle allows for greater torque and comfort
• Tip-Ident quickly identifies nut driver and size

The product is high-quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High-quality
• Reliability
• Durability
• Attractive styling

NOKORODE Regular Paste Flux will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G.

• Lead free
• Cleans and fluxes at the same time
• Safe for potable water
• Certified NSF/ANSI 61-G and 372

InSinkErator Jam-Buster Wrench is a tool that quickly and effectively helps to free uncomplicated jams in your disposal. Simply insert an end of wrench into bottom of disposal and then turn back and forth. Works only on InSinkErator brand garbage disposals.

• Hex-ended wrench
• Works exclusively on InSinkErator manufactured disposers
• Back and forth turning frees simple jams
• Genuine InSinkErator part

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

3/8" Tin handle acid brush with 6" handle. Select horsehair secured in tin handles. part number mfr. 10001.

• no bullet
• no bullet
• no bullet
• none

The Stanley 10-Compartment Professional Deep Organizer is constructed of unbreakable polyester for long-lasting use. 10 removable compartments accommodate a wide variety of tools and are locked into place when the lid is closed. Ideal for organizing small parts, the organizer is perfect for the professional carpenter, mechanic, handyman and others.

• Unbreakable polycarbonate lid for lasting use
• 10 removable compartments accommodate a wide variety of tools
• Lid locks the compartments into place when closed
• Ideal for organizing small parts
• Perfect for the professional carpenter, mechanic, handyman and others
• See-through lid for easy identification

Double thrust plunger improves suction ability. Fits most toilets and sinks. Flip out sleeve works in smaller openings.

• Toilet plunger yellow 18 in. handle and large rubber head
• 6 in. double thrust rubber cup design
• Modern plunger cup size fits most toilets
• Yellow painted, wooden handle
• Double thrust 6 in. force cup
• Light weight and durable

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Super durability
• Attractive styling
• Easy install
• No special tool needed

The MILWAUKEE® TORCH™ with Carbide Teeth for Thick Metal SAWZALL® Blade cuts longer, cuts more, and cuts faster. This carbide SAWZALL® blade is designed with Carbide Teeth for longer life vs. bi-metal blades in black iron, rebar, stainless steel, cast iron, and more. The 8 TPI design is ideal for fast, smooth cuts in thick metals​.

• Longer Life in Thick Metals.
• Designed with Carbide Teeth for longer life vs. bi-metal  blades in thick metal applications​
• 8 TPI for fast, smooth cuts in thick metals​
• Cuts black pipe, angle iron, rebar, stainless steel, cast iron and more​
• Large tooth gullets for easy material ejection​
• 1in tall blade for better durability​
• 1/2" Universal Tang​
• Made in USA​
• Available in 6", 9" and 12" lengths in 1PKs, 3PKs, 5PKs and 25PKs
• Includes: (1) Blade

The MILWAUKEE® TORCH™ with NITRUS CARBIDE™ SAWZALL® Blade for Cast Iron and other thick metals delivers the fastest cutting, and longest life with a breakthrough Carbide Technology. These NITRUS CARBIDE™ reciprocating saw blades are engineered to dissipate heat better than any other demolition blade for faster cutting​. The TORCH™ with NITRUS CARBIDE™ for Cast Iron delivers 5x life versus carbide teeth blades in cast iron. This 8TPI blade is ideal for the fastest, smoothest cuts in hard cast iron, stainless steel, black pipe, rebar, & angle iron​.

• For The Toughest Cast Removals.
• NITRUS delivers the fastest cutting, longest life products with a breakthrough Carbide Technology
• Our NITRUS Carbide blades are engineered to dissipate heat better than any other demolition blade for faster cutting​.
• 5x life versus carbide teeth blades in cast iron​
• Fastest, Smoothest cuts in cast iron​
• Optimized Performance in, hard cast iron, stainless steel, black pipe, rebar, & angle iron​
• 8 TPI design for fast, smooth cutting in cast iron and other thick metals​
• Large tooth gullets for easy material ejection​
• ½” Universal Tang​
• Made in USA​
• Available in 6", 9" and 12" lengths in 1PKs, 3PKs, and 5PKs
• Includes: (1) 9" 8TPI TORCH W/ NITRUS Carbide SAWZALL Blade

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

The product is high-quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High-quality
• Reliability
• Durability
• Attractive styling

The HDX 1/2 in. Heavy-Duty Fitting Brush is used to clean the inside of 1/2 in. Dia plastic or metal fittings (not included) prior to soldering. This brush features high-carbon steel bristles. Contains a comfortable contoured plastic handle.

• High-impact polystyrene plastic handle for a secure grip
• For cleaning the inside of copper, brass or plastic fittings
• Compatible with 1/2 in. Dia fittings
• Features high-carbon steel bristles
• Durable construction
• 90-day warranty

Ryobi ONE+ 18V 6-Port Fast Charger. 30% Faster Charging Than P135. Consecutively charge and maintain up to 6 18V ONE+ batteries. Compatible with all RYOBI 18V ONE+ batteries. 2 Amp USB output for charging portable electronics. Mfg #PCG006

• 30% Faster Charging Than P135
• Consecutively charge and maintain up to 6 18V ONE+ batteries
• Compatible with all RYOBI 18V ONE+ batteries
• 2 Amp USB output for charging portable electronics

Expand your RYOBI ONE+ 18V tool collection with the ONE+ 18V Bolt Cutter. Hot forged steel jaws open to accommodate materials like chains, locks, bolts, fencing and wire shelving up to 3/8 in. in diameter, performing up to 200 cuts per charge using a RYOBI High Capacity LITHIUM+ battery. The innovative design minimizes hand and arm fatigue typically experienced with manual bolt cutters, and the clear sight line in the design allows for optimal visibility of the cut area. Additionally, this tool features separate forward and reverse buttons for precision cutting control and makes repetitive cuts easy. The RYOBI ONE+ 18V Bolt Cutter is backed by a 3-year warranty and is part of the RYOBI 18V ONE+ System of over 300 Cordless Products. The 18V ONE+ Bolt Cutter includes an operators manual and is sold as a tool only product. Battery and charger are sold separately.

• Innovative design to minimize hand and arm fatigue compared to manual bolt cutters
• Ideal for cutting a variety of materials including chain, locks, bolts, fencing, and wire shelving up to 3/8 in. thick
• Separate forward and reverse buttons for precision cutting control and makes repetitive cuts easy
• Clear sight of workpiece for optimum cutting visibility
• Hot forged steel jaws and hardened steel mechanism for maximum durability
• Part of the RYOBI 18V ONE+ System of Over 300 Cordless Products
• 3-year manufacturer's warranty
• Includes: (1) P592 ONE+ 18V Bolt Cutter and operator's manual
• Battery and charger sold separately

Taffeta finish, flexible PVC (vinyl) monomeric film. All-weather, UV, water and tear resistant. 2.5" x 3.5" flags with a 21" wire .067 gauge thick.

• For high visibility for directional/safety. Surveying: mark and identify boundaries and property lines.
• Lead free
• Heavy metal free
• Available in bright colors easy to identify
• For limiting access on worksites
• Contains no lead or toxic chemicals

The Klein Tools Crimping and Cutting Tool crimps both insulated and non-insulated 10-22 AWG terminals and connectors. The tapered nose which is great when working in tight spaces. The wire cutter in the nose specially hardened for long life.

• Crimper crimps 10 to 22 AWG insulated and non-insulated terminals
• Cutting and Crimping Tool has specially hardened wire cutter in nose
• Tapered nose design for working in confined spaces
• Crimping die marked for insulated and non-insulated solderless terminals and connectors
• Made in USA
• Plastic-dipped, cushioned handles for comfort

• Plain brass screwed fitting
• Lead free
• Ideal replacement for old or damaged plug
• Made from high-grade brass to enable lasting use
• Suitable for MPT connection
• Lead-free plug ensures reliable functioning

The Milwaukee 8 in. 8/12 TPI Reciprocating Saw Blades (5-Pack) are all-purpose blades that can cut through a variety of materials including nail-embedded wood, plastic and cast iron. Super Sawzall blades are made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade we make. This blade has a 1/2 in. universal tang that fits all Sawzalls and standard competitive saws. Includes 5 individual blades.

• 1/2 in. universal tang fits all sawzall
• Bi-metal construction
• 8/12 TPI
• All-purpose blade can cut wood, nail-embedded wood, composition material, plastic, ferrous and non-ferrous metals and cast iron
• Heat treated to maximize performance in specific cutting applications
• Manufactures sawzall blades for the toughest professional applications
• 8% cobalt to keep a sharper tooth edge longer

Lead-Free Tin-Antimony solder with a narrow pasty range. It has a melting temperature of 455 degree F and tensile strength of 5500 PSI. Manufactured to ASTM B-32 specifications.

• Lead-free tin-antimony solder
• Narrow pasty range
• Melting temperature of 455 degree F
• Tensile strength of 5500 PSI
• Manufactured to ASTM B-32 specifications

Stanley heavy-duty utility blades are designed with precision-honed edges for consistency and durability. These blades work with most standard utility knives. They are stored in a dispenser for convenience and safety.

• Precision-honed edges for consistency and durability
• For general-purpose cutting
• Handy blade dispenser included to house the 100-pack of blades
• Fit most standard utility knives
• Always be in a balanced stable position when using a hand tool
• Convenient 100-pack
• Long-lasting

The Industrial Plunger is a must-have in any commercial restroom. Lip unfolds to create a tighter fit. Lip also recesses for easier storage.

• For use on toilets
• Can also be used for drains
• Cup compresses at any angle
• 6 in. Dia cup
• 25 in. overall length
• For industrial application

This DEWALT 2-pack 12 in. Bi-Metal Hacksaw Blade is ideal for cutting. The blades cut most metal including unhardened tool steel and stainless steel. The Bi-Metal construction combines flexibility from carbon steel and cutting performance from high speed metal. These blades beat out major competitors in quality in its class.

• Best initial sharpness
• Bi-metal construction
• Cuts most metals
• DEWALT product guaranteed tough
• 18 teeth per inch (TPI)

The MILWAUKEE OPEN-LOK Multi-Material Multi-Tool Blade Variety Pack 3PC provides you with an assortment of optimal cutting performance in multi-material applications like screws, nails, wood, cement board, plaster, PVC, drywall, and more. The Carbide Teeth blade lasts up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining a longer blade life. The thin kerf design and aggressive Carbide Teeth offer faster cuts and better cutting performance in wood or wood with embedded fasteners. TITANIUM CHARGED Bi-Metal blades have an optimized titanium blend for maximum wear-resistance and up to 15x longer life vs. high carbon steel (HCS) blades. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• Carbide Teeth for up to 50x longer life vs bi-metal blades
• Unique Aggressive Carbide Teeth for faster cuts
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• TITANIUM CHARGED bi-metal for up to 15X Longer Life vs High Carbon Steel Blades
• TITANIUM CHARGED bi-metal blades utilize an optimized titanium blend for maximum wear-resistance and longer life
• For use in Multi-Material applications: wood, screws, nails, cement board, plaster, and more
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• Includes: (1) OPEN-LOK 1-3/8" Carbide Teeth Multi-Material Multi-Tool Blade, (1) OPEN-LOK 1-3/8" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade, (1) OPEN-LOK 2-1/2" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade

The Milwaukee 48-00-5184 6 in. x 18 TPI Thin Kerf metal-cutting blades with the Double Duty Upgrade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck is engineered to protect against tang breakage and delivers the strongest SAWZALL blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts. The Milwaukee 48-00-5184 contains 5 Reciprocating Saw blades.

• Optimized tooth design providing 2X more life than our previous generation SAWZALL blades
• SAWZALL blades tough neck ribs strengthen the blade tang and minimize breakage
• Matrix II bi-metal teeth for greater durability
• Ideal for cutting conduit tubing, channels and pipe
• Includes 5-blades

Outdoor (encapsulated)

• Backlit hardened keys
• Audible and visual feedback
• Keypad is flush mounting and exhibits superior durability
• Features: Heavy traffic application, remote trigger input (remote to exit), 120 user capability & programmable 00-99 second relay activation time
• Benefits: Auto adjusting voltage input, cost-effective & 6 conductor wire harness for easy installation
• Operating voltage: 12 to 24 VDC (Self-regulating)
• Duty Cycle: Medium
• On/off illuminated weatherproof keypad
• Features 12 to 24 VDC operating voltage
• Equipped with 120 user capability
• 6-conductor wire harness ensures easy installation
• Weatherproof construction for long-term use

The 48-22-3104 Milwaukee Inkzall Permanent Markers are optimized for jobsite conditions. The durable tip is designed to withstand writing on rough surfaces such as OSB, cinderblock and concrete and writes through dusty, wet or oily contamination. The hard hat clip is designed to clip onto the brim of hard hats for easy access.

• Clog resistant tip- writes on dusty, wet and oily surfaces and is optimized for rough surfaces such as OSB, cinderblock and concrete
• Hard hat clip attaches for easy access
• Quick dry time reduced smearing markings
• Fine point marker black permanent non-toxic ink

Lead-free tin-copper solder with a tensile strength 5,800 psi. It has a NSF 61 Certification for safe use in potable water applications. It melts and performs better than 95/5, with a melting temperature of 445 degree F.

• Lead-free tin-copper solder
• Melts and performs better than 95/5
• Melting temperature 445 degree F
• Tensile strength: 5,800 psi

The MILWAUKEE® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE Impact Duty™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 1/4" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

Ryobi Impact Rated Driving Set, 70 Piece. Variety Of Impact Rated Driving Bits Perfect For All Screw Driving Applications. Precision-milled bit tips for enhanced fitment with commonly used fasteners. 2" bits feature a TORSION ZONE that absorbs the high torque from more demanding applications and helps to preserve bit tips. 1" bits are great for use with included impact rated magnetic bit holder. Mfg #A967001

• Variety Of Impact Rated Driving Bits Perfect For All Screw Driving Applications
• Precision-milled bit tips for enhanced fitment with commonly used fasteners
• 2" bits feature a TORSION ZONE that absorbs the high torque from more demanding applications and helps to preserve bit tips
• 1" bits are great for use with included impact rated magnetic bit holder

The Milwaukee 48-00-5188 9 in. x 18 Teeth per in. Thin Kerf metal-cutting Blade with the Double Duty Upgrade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck is engineered to protect against tang breakage and delivers the strongest SAWZALL blade tang on the market. Maintaining a short profile and thin body, these Blades are ideal for making fast, flexible cuts. The Milwaukee 48-00-5188 contains 5 Blade.

• Optimized tooth design providing 2X more life than our previous generation SAWZALL blade
• SAWZALL blade tough neck ribs strengthen the blade tang and minimize breakage
• Matrix II bi-metal teeth for greater durability
• Material, blade geometry and heat treating are designed to maximize metal cutting performance
• Includes 5 blades

The Milwaukee FASTBACK Folding Utility Knife features a press and flip mechanism for easy, 1-handed opening. The Milwaukee FASTBACK Folding Utility Knife allows users to make quick, tool-free blade changes for maximum jobsite efficiency. The utility knife has an all metal body, an integrated gut hook and wire stripper for increased versatility. The folding utility knife is equipped with a durable wire belt clip to reduce pocket tearing and a blade holder designed for scoring. The knife has a lanyard hole for safe convenient tethering.

• All metal body
• Gut hook
• Wire stripper
• Durable wire belt clip reduces pocket tearing
• Lanyard hole
• Blade holder designed for scoring
• Metal extension to prevent accidental blade removal
• Includes: (1) 48-22-1501 FASTBACK Folding Utility Knife and (1) General Purpose Blade
• Limited Lifetime Warranty

15% Silver, 5% Phosphorus, remainder is Copper. This is the best alloy for filling gaps when close fit-ups cannot be made. It also has the highest joint ductility and strength in HVAC-R applications. It meets AWS BCuP-5.

• Contains 15% silver, 5% phosphorus, remainder
• Best alloy for filling gaps when close fit-ups cannot be made
• Highest joint ductility and strength in HVAC-R applications
• Meets AWS BCuP-5

The DEWALT Roofing Utility Blades (5-Pack) are used with fixed blade knifes only. These blades can be sharpened by the user. They are ideal for making cuts in various types of roofing materials.

• Edge is engineered to withstand the rigors of cutting todays heavy and thick roofing materials
• Cuts roofing shingles, felt paper, Tyvek, foam board, insulation, shingles and other building materials
• Designed for use in fixed blade knives only
• Roof is laser etched on blades to help prevent accidental mixing with standard blades
• Convenient 5-pack

The MILWAUKEE OPEN-LOK Multi-Tool Blade Variety Kit 5PC provides you with an assortment of blades for multi-material, hardwood, and clean wood cutting applications. The set includes TITANIUM CHARGED Bi-Metal blades with an optimized titanium blend for maximum wear-resistance and up to 15x longer life vs. high carbon steel (HCS) blades. The bi-metal multi-tool blades are ideal for wood with nails, PVC, and drywall. The Triple-Ground Japanese Tooth hardwood blade delivers up to 2X faster cuts than the previous MILWAUKEE HCS blade and features a PRO-CURVE cutting edge for greater control. The Japanese Tooth blade is ideal for fast, clean cuts in hardwood and can also be used in clean wood, PVC, and drywall. The set also includes high carbon steel (HCS) blades designed with aggressive, edge-ground teeth for fast wood cutting. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. The set is organized in a hard case for compact and convenient storage. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• TITANIUM CHARGED bi-metal for up to 15X Longer Life vs High Carbon Steel Blades
• TITANIUM CHARGED bi-metal blades utilize an optimized titanium blend for maximum wear-resistance and longer life
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• PRO-CURVE cutting edge for greater control
• Triple-ground, flame-hardened Japanese Teeth for fast and clean cuts in hardwood
• Cut-Away Blade Body Shape For Fast Plunge Cuts
• High Carbon Steel (HCS) wood blade for cuts in clean wood, drywall, & pvc
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• The set is organized in a hard case for compact and convenient storage
• Includes: (1) OPEN-LOK 1-3/8" HCS Japanese Tooth PRO-CURVE Hardwood Multi-Tool Blade, (2) OPEN-LOK 1-3/8" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade, (2) OPEN-LOK 1-3/8" HCS Wood Multi-Tool Blade, (1) Storage Case

Lead-Free Tin-Antimony solder with a narrow pasty range. It has a melting temperature of 455 degree F and tensile strength of 5,500 PSI. Manufactured to ASTM B-32 specifications.

• Lead-free tin-antimony solder
• Narrow pasty range
• Melting temperature of 455 degree F
• Tensile strength of 5500 PSI
• Manufactured to ASTM B-32 specifications

Super Sawzall blades are made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade we make. This blade has a 1/2 in. universal tang that fits all Sawzalls and standard competitive saws. Includes 5 individual blades.

• Nail guard solves this trade-off between speed and durability with an aggressive 5 TPI pattern for faster cuts and a unique design that protects against tooth fracture
• Fang tip ordinary tips bounce or skate on the work piece; fang tip bites into the wood on first contact
• Matrix II bi-metal teeth for greater durability
• Engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood blade on the market
• For very fast cutting in nail embedded wood and general roughing-in work
• 5 blades
• Universal tang that fits all sawzalls and standard competitive saw

The MILWAUKEE OPEN-LOK All-Purpose Oscillating Multi-Tool Blade Variety Pack 3PC provides you with an assortment of blades in the three most common cutting applications: metal, wood & nails, and hardwood. The set includes a Carbide Teeth metal blade that lasts up to 50X longer than standard bi-metal blades and can be used in a wide range of metal materials while maintaining longer blade life such as; screws, bolts, nails, and more. The TITANIUM CHARGED Bi-Metal blade has an optimized titanium blend for maximum wear-resistance and up to 15x longer life vs. high carbon steel (HCS) blades. The bi-metal multi-tool blade is ideal for wood with nails, PVC, and drywall. The Triple-Ground Japanese Tooth hardwood blade delivers up to 2X faster cuts than the previous Milwaukee HCS blade and features a PRO-CURVE cutting edge for greater control. The Japanese Tooth blade is ideal for fast, clean cuts in hardwood and can also be used in clean wood, PVC, and drywall. These blades feature a reinforced Universal Fit OPEN-LOK anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE oscillating multi-tool blades are designed and made in the USA with global materials.

• Carbide Teeth for up to 50x longer life vs bi-metal blades
• Reinforced Universal Fit OPEN-LOK anchor for better strength & control
• Universal Fit OPEN-LOK Anchor fits all major brands of non-starlock tools
• TITANIUM CHARGED bi-metal for up to 15X Longer Life vs High Carbon Steel Blades
• TITANIUM CHARGED bi-metal blades utilize an optimized titanium blend for maximum wear-resistance and longer life
• PRO-CURVE cutting edge for greater control
• Triple-ground, flame-hardened Japanese Teeth for fast and clean cuts in hardwood
• For use in Multi-Material applications: wood, nails, PVC, and drywall
• Protective black oxide coating for corrosion resistance
• Long lasting laser etching for clear and easy blade identification
• Cut-away blade body shape for fast plunge cuts
• Made in the USA with global materials
• Includes: (1) OPEN-LOK 1-3/8" Carbide Teeth Metal Multi-Tool Blade, (1) OPEN-LOK 1-3/8" TITANIUM CHARGED Bi-Metal Multi-Material Multi-Tool Blade, (1) OPEN-LOK 1-3/8" HCS Japanese Tooth PRO-CURVE Hardwood Multi-Tool Blade

The MILWAUKEE SHOCKWAVE Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee SHOCKWAVE Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.

• Robust carbide for up to 9x life in concrete
• Precision ground carbide tip design for up to 4x faster speeds in concrete
• SHOCKWAVE Impact Dutyâ„¢ engineered for hammer drills and impacts
• For use in concrete, brick, and block
• Sharpened carbide edges for faster starts and less bit walking
• Wide flute design for fast, efficient dust removal and more holes per charge
• ¼” hex shank for added tool versatility
• SHOCKWAVE Impact Dutyâ„¢ hammer drill bits available in diameters 1/8” to 1/2"
• Includes: (1) 3/16" x 4" x 6" SHOCKWAVE Impact Dutyâ„¢ Carbide Hammer Drill Bit

Great for clearing clogged sinks.Durable rubber force cup and wooden handle offer extended use.Affordable and easy to use for optimal unclogging.

• 4 in. red rubber cup for effective plunging
• Naturally degrading wooden handle
• Rubber cup resists most cleaning chemical solutions
• Classic design force cup
• Proven design and rugged durability are a given
• Available in the cost-effective case pack for your stocking needs

Nokorode Regular Paste Flux is a lead free, all purpose, soft soldering paste flux ideal for use with 95/5 and other common solders. Nokorode special oil base protects the solder joint against corrosive attack. It cleans and fluxes all at one time.

• Cleans and fluxes in one operation saving time and money
• Flows smoothly into even the smallest cavity
• Multipurpose for use with 95/5, 60/40, 50/50, and 40/60 solder
• Lead free and acid free - safe to use on potable water systems
• Special oil base protects the solder joint against corrosive attack
• Used with 95/5, 60/40, 50/50 and 40/60 solders, it can be used on all solderable metals including copper, tin, zinc, nickel, and sheet lead.
• Do not use on stainless steel, aluminum or magnesium
• Not recommended for electronic use.

The model 601 is designed for applications where weight and size are critical factors. Used for HVAC purging, pressure testing with nitrogen or other inert gases. Gauges feature rubber gauge guards for added protection in abusive conditions. Plastic knob for easy grip and precise adjustment. Maximum delivery pressure 400 or 800 PSIG.

• 580 CGA inlet connection
• 1/4 in. 45 degree flare SAE outlet connection
• Can be used with argon, helium, and nitrogen gases
• Rubber gauges for additional connection

50% tin, 50% lead solder. For use only in non-potable water applications. Larger 16 oz. spool for convenience. The wire is 0.125 in. Dia.

• 50% tin, 50% lead solder
• For use only in non-potable water applications
• Larger 16 oz. spool for convenience
• 0.125 in. Dia wire

Folding Digital Pocket Thermometer with Temperature range: minus 58 degree F to 572 degree F (minus 50 degree C to 300 degree C). Features include: Folding temperature probe, Minimum/Maximum record Built-in magnetic mount. Auto power off Large easy-to-read display Folding probe tip, measures in any position. 1-Year limited warranty.

• Folding probe tip measures in any position
• Temperature range: minus 58 degree F to 572 degree F (minus 50 degree C to 300 degree C)
• Accuracy: plus/minus 1.8 degree F or plus/minus 1 degree C in the range of minus 22 degree F to 302 degree F/minus 30 degree C to 150 degree C, otherwise plus/minus 4 degree F or plus/minus 2 degree C
• Resolution: 0.1 to 19.9 minus plus 199.9, otherwise 1
• Minimum/maximum record
• Build-in magnetic mount
• Auto power off
• Large easy-to-read display
• Update rate approximately 1-second

Bristles Made From Crimped, Corrosion Resistant, Steel Spring Wire. Easy grip, ergonomic plastic handle for easy use. Fitting brush for multiple uses.

• no bullet
• no bullet
• no bullet
• no bullet