The Symmons Identity Collection brings a timeless touch to modern decor. This Identity tub and shower trim kit is plated in an abrasion resistant finish and is designed to last a lifetime. This single handle trim kit includes a shower arm, low flow showerhead, diverter tub spout, escutcheon, and an ADA compliant lever handle. The single mode showerhead is WaterSense certified and has a low flow rate of 1.5 GPM, conserving water and saving you money on your water bill without affecting the shower's performance. Like all Symmons products, this Identity trim kit is backed by a limited lifetime consumer warranty and 10 year commercial warranty.

• Tub spout reach: 5.25 inches
• Single mode 1.5 GPM low flow showerhead promotes water conservation
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• For use with valve model 262BODY; if service stops are needed, use model 262XBODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model 262BRBODY
• Constructed of brass, zinc, stainless steel, and plastic
• Limited lifetime warranty for consumer; 10 year warranty for commercial use
• WaterSense

Symmons offers a full selection of accessories including showerheads, hand showers, diverters, towel bars, and more. Symmons accessories are available for a wide variety of residential, commercial, and institutional applications. Trusted by professionals for over 80 years, Symmons will deliver the quality you expect and the looks you desire.

• 1-spray showerhead
• 2.8 in. showerhead face diameter
• Constructed of brass and plastic
• 1/2-in NPT connection
• Female ball joint connection
• Easy to clean rubber nozzles
• 1.2 GPM (4.5 l/min) flow rate for conserving water without sacrificing performance
• Limited lifetime warranty for consumer; 5-year warranty for commercial use
• WaterSense

The European design of the Symmons Dia Collection was inspired by modern industrial structures. Its clean, geometric lines make it the smart choice for any bath. Trusted by professionals for over 75 years, Symmons provides the quality you expect and the looks you desire.

• Dia exposed satin nickel shower
• Metal lever handle
• Diverter included for toggling between showerhead and hand shower position
• Includes column/slide bar, hand shower bracket and 60 in. flexible metal hose
• 1 mode showerhead
• 1 mode hand shower
• 1.5 GPM (5.7 l/minute)
• Valve not included- for use with existing valve

The European design of the Symmons Dia Collection was inspired by modern industrial structures. Its clean, geometric lines make it the smart choice for any bath. Trusted by professionals for over 75 years, Symmons provides the quality you expect and the looks you desire.

• Dia exposed polished chrome shower
• Metal lever handle
• Diverter included for toggling between showerhead and hand shower position
• Includes column/slide bar, hand shower bracket and 60 in. flexible metal hose
• 1 mode rain showerhead
• 1 mode hand shower
• 1.5 GPM (5.7 l/minute)
• Valve not included- for use with existing valve

A transformation of 3 core product lines, the Symmons Origins Collection combines high quality with a fresh design for cost-efficient faucets and showers. Powered by Temptrol, this solution provides easy installation and a stylish look. Trusted by professionals for over 75 years, Symmons provides the quality you expect and the looks you desire.

• Temptrol pressure balancing valve
• Adjustable stop screw to limit handle turn
• Metal lever handle
• 1 mode showerhead
• 2.0 GPM (7.6 l/min) standard
• Tub spout not included
• Satin nickel finish

The ultra contemporary styling of this Duro Single Handle Wall Mounted Shower Trim Kit with Volume Control was inspired by the clean geometric shape of modern architecture. This shower trim kit is covered in a scratch resistant finish over solid metal and includes a showerhead, shower arm, escutcheon, shower lever handle, and integral volume control handle to adjust the shower water volume. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use for everyone. The single mode showerhead is WaterSense certified and runs at an eco friendly low flow rate of 1.5 GPM, so you can conserve water without affecting performance, and save on your water bill. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Single Handle Wall Mounted Shower Trim is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro satin nickel shower trim with single mode showerhead with full spray
• Trim kit only; valve not included
• Single solid brass lever handle for ease of use and temperature adjustments
• One lever handle on trim for water volume control
• Includes shower arm, round showerhead, brass escutcheon, and handle
• Tub spout not included
• Requires Temptrol Pressure Balancing Shower Valve
• WaterSense certification promotes water conservation
• 1.5 gpm (5.7L/min) low flow rate for saving water without affecting performance
• For use with pressure balancing valve model S261XBODY
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 year Commercial Warranty

Symmons Dia Tub/Shower Trim With Lever Handle And Secondary Integral Volume Control. Chrome Finish. Diverter Integrated Into Pressure Balancing Valve. Non-Diverter Tub Spout. Single Mode Showerhead. Mfg #S-3502-CYL-B-TRM

• Chrome Finish
• Diverter Integrated Into Pressure Balancing Valve
• Non-Diverter Tub Spout
• Single Mode Showerhead

If you find yourself wavering somewhere between traditional and modern styles, the Elm collection is perfect for your bathroom space. Constructed of high quality materials and plated in an abrasion resistant finish over solid metal, this shower and hand shower trim kit from the Elm suite will last a lifetime. This shower trim kit includes a shower arm, low flow showerhead, hand shower with a flexible 60 inch hose, brass escutcheons, and two lever handles. With an adjustable lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use. The secondary lever controls the flow of water to the hand shower unit. At a low flow rate of 1.5 GPM, the eco friendly single mode showerhead allows you to conserve water and save money on your water bill, without affecting the shower's performance. This shower trim kit is backed by the Symmons Lifetime Limited Warranty and includes everything needed for installation, meaning you can update your bathroom without replacing your valve.

• In line vacuum breaker
• 60 inch flexible metal hose
• Wall connection
• Two metal lever handles for ease of use
• Main lever handle controls shower water temperature
• 1.5 GPM (5.7 L/min) low flow rate for water conservation
• Constructed of brass, zinc, stainless steel, and plastic
• In-line vacuum breaker
• Backed by the Symmons limited lifetime homeowner warranty/10 year commercial warranty
• Separate dual outlet diverter
• For use with shower valve 261XBODY and diverter valve 2DIVBODYSRT
• Polished chrome finish

Symmons Duro Matte Black 1.5 GPM Tub/Shower Trim. Mix And Match Handles Spout Heights Showerheads And Tub Spouts For A Unique Product Assortment For Your Project. The Clean Geometric Shape Of Modern Architecture Inspired The Symmons Duro Collection'S Ultra-Contemporary Styling. Its Precise Rectangular Form Creates A Unique Minimalist Look For Any Contemporary Bathroom. Mfg #3602-MB-1.5-TRM

• Mix And Match Handles Spout Heights Showerheads And Tub Spouts For A Unique Product Assortment For Your Project
• The Clean Geometric Shape Of Modern Architecture Inspired The Symmons Duro Collection'S Ultra-Contemporary Styling.
• Its Precise Rectangular Form Creates A Unique Minimalist Look For Any Contemporary Bathroom.
• Finish-Black

The ultra contemporary styling of this Duro Single Handle Wall Mounted Shower Trim Kit with Volume Control was inspired by the clean geometric shape of modern architecture. This shower trim kit is covered in a scratch resistant finish over solid metal and includes a showerhead, shower arm, escutcheon, shower lever handle, and integral volume control handle to adjust the shower water volume. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use for everyone. The single mode showerhead is WaterSense certified and runs at an eco friendly low flow rate of 1.5 GPM, so you can conserve water without affecting performance, and save on your water bill. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Single Handle Wall Mounted Shower Trim is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro shower trim with single mode showerhead with full spray
• Matte black shower trim kit only; valve not included
• Single solid brass lever handle for ease of use and temperature adjustments
• One lever handle on trim for water volume control
• Includes shower arm, round showerhead, brass escutcheon, and handle
• Tub spout not included
• Requires Temptrol Pressure Balancing Shower Valve
• WaterSense certification promotes water conservation
• 1.5 gpm (5.7L/min) low flow rate for saving water without affecting performance
• For use with pressure balancing valve model S261XBODY
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 year Commercial Warranty

The ultra contemporary styling of this Duro Two Handle Wall Mounted Tub and Shower Trim Kit was inspired by the clean geometric shape of modern architecture. This trim kit is covered in a scratch resistant finish over solid metal and kit includes a shower arm, low flow showerhead, hand spray with 60 inch flexible hose, a slide bar for the hand spray, brass escutcheon, adjustable lever handle, and tub spout. The solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead is WaterSense certified to conserve water without affecting performance, saving you money on your water bill. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Two Handle Wall Mounted Tub and Shower Trim with Hand Spray is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro tub and shower trim with handheld sprayer and 7 inch non diverter tub spout
• Trim kit only; valve not included
• Metal lever handles
• Single mode hand spray and single mode round showerhead
• 30 inch slide bar for handheld sprayer and 60 inch flexible metal shower hose
• Dual check valves for backflow protection
• 1.5 gpm (5.7 L/min) low flow showerhead
• WaterSense certification promotes water conservation
• In line vacuum breaker and wall connection
• Requires Symmons Triple Outlet Diverter Valve and Temptrol Pressure Balancing Tub and Shower Valve
• For use with pressure balancing valve model 261XBODY and diverter valve 3DIVBODYSRT
• Or for 3x faster installation, use Temptrol Rapid Install bracket model 261XBRBODY
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 year Commercial Warranty

The ultra contemporary styling of this Duro Single Handle Wall Mounted Shower Trim Kit was inspired by the clean geometric shape of modern architecture. This shower trim kit is covered in a scratch resistant finish over solid metal and includes a brass escutcheon, shower lever handle, and integral volume control handle to adjust the shower water volume. The solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use for everyone. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Single Handle Wall Mounted Shower Trim is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro satin nickel shower trim kit
• Trim kit only; valve not included
• Showerhead and tub spout not included
• Single ADA compliant brass lever handle
• Secondary integral volume control handle to control shower water volume from trim
• Includes brass escutcheon
• Requires Temptrol Pressure Balancing Shower Valve
• For use with pressure balancing valve model S261XBODY
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY
• Screwless brass escutcheon makes for easy cleaning
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 year Commercial Warranty

With many finishes to choose from, the Elm Collection from Symmons is a natural fit with most bathroom interiors. Constructed of high quality materials and plated in an abrasion resistant finish over solid metal, this tub and shower trim kit from the Elm suite will last a lifetime. This kit includes a shower arm, low flow showerhead, non diverter tub spout, brass escutcheon, shower lever handle, and secondary integral diverter handle. With an ADA compliant adjustable lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use. The single mode showerhead is WaterSense certified and runs at an eco friendly low flow rate of 1.5 GPM, allowing you to conserve water and save money on your water bill, without affecting the shower's performance. This kit is backed by the Symmons Lifetime Limited Warranty and its technical support team. It includes everything needed for installation, meaning you can update your bathroom without replacing your valve.

• 5 mode round showerhead: full, soft, jet, massage, wide
• Small lever handle on valve trim for diverting the flow of water between the showerhead and tub spout
• ADA compliant metal lever handle controls shower water temperature
• 1.5 GPM (5.7 LPM) low flow rate showerhead helps with water conservation
• 1 ADA compliant metal lever handle for ease of use
• Constructed of brass, zinc, stainless steel, and plastic
• 1.5 GPM 5.7 l/minute flow rate for conserving water without sacrificing performance
• For use with valve model S262BODY, or for 3x faster installation, use temptrol rapid install mounting bracket model S262BRBODY valve not included
• Limited lifetime warranty for consumer, 10-year warranty for commercial use
• Polished chrome finish

The Symmons Origins Collection combines high quality with a fresh design for cost efficient showers. This trim kit includes a shower arm, low flow showerhead, escutcheon, adjustable lever handles and non diverter tub spout. Turn the primary lever handle on the valve cover plate in the direction of the hot and cold indicators to ensure your preferred water temperature. The secondary lever handle functions as a diverter, allowing you to switch the flow of water from the showerhead to the tub or vice versa. At an eco friendly low flow rate of 1.5 gallons per minute, the showerhead helps you conserve water and save on your water bill. Its rubber nozzles make the showerhead simple to clean, too. This shower trim kit is simple to install and comes with a limited lifetime warranty and the backing of the Symmons technical support team.

• Satin nickel tub and shower trim kit includes showerhead, shower arm, escutcheon, lever handles and tub spout
• Single ADA compliant lever handle to control shower water temperature
• Secondary integral diverter handle directs flow of water from shower to tub spout
• 1.5 GPM (5.7 L/min) low flow rate for conserving water without sacrificing performance
• Non diverter tub spout
• Single mode, full spray showerhead
• For use with valve model S262BODY; if service stops are needed, use model S262XBODY (valve not included)
• Constructed of stainless steel, plastic and zinc

The Symmons Identity Collection brings a timeless touch to modern decor. This Identity tub and shower trim kit is plated in an abrasion resistant finish and is designed to last a lifetime. This single handle trim kit includes a shower arm, low flow showerhead, diverter tub spout, escutcheon, and an ADA compliant lever handle. The single mode showerhead is WaterSense certified and has a low flow rate of 1.5 GPM, conserving water and saving you money on your water bill without affecting the shower's performance. Like all Symmons products, this Identity trim kit is backed by a limited lifetime consumer warranty and 10 year commercial warranty.

• Tub spout reach: 5.25 inches
• Single mode 1.5 GPM low flow showerhead promotes water conservation
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• For use with valve model 262BODY; if service stops are needed, use model 262XBODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model 262BRBODY
• Constructed of brass, zinc, stainless steel, and plastic
• Limited lifetime warranty for consumer; 10 year warranty for commercial use

Blending sleek forms and simple lines, the Duro 1-Handle Wall-Mounted Hand Shower Trim boasts a modern sophistication that is a natural complement to contemporary bathroom designs. All of Symmons' products are designed with the customer in mind; the proof is in the details. Plated in a scratch-resistant matte black finish over solid brass, this hand shower trim has the durability to add contemporary elegance to your bathroom for a lifetime. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom temperature setting with ease of use for everyone. At an eco-friendly low flow rate of 1.5 gallons per minute, the single mode hand shower is WaterSense certified so that you can conserve water without sacrificing performance, which will, in turn, save you money on your water bill. This model includes everything you need for quick installation. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, Symmons' Duro 1-Handle Wall-Mounted Hand Shower Trim is a seamless addition to your bathroom sink for a lifetime.

• Matte black finish designed to be durable, abrasion-resistant plating that lasts a lifetime
• 1-mode hand shower with full spray
• 1-solid brass lever handle for ease of use
• Adjustable stop screw to limit handle turn
• Includes hand shower, slide bar, escutcheon, handle, and hose
• 60 in. flexible metal hose
• 30 in. slide bar with cradle for hand shower
• WaterSense certification promotes water conservation
• 1.5 GPM (5.7 L/min) flow rate for saving water without sacrificing performance
• Constructed of brass, zinc, and stainless steel with some plastic elements to ensure lifelong durability
• For use with pressure-balancing valve model 262BODY; for 3x faster installation, use Temptrol rapid install bracket model 262BRBODY (valve not included)
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by Symmons' limited lifetime homeowner warranty/5 year commercial warranty

Symmons Origins Hand Shower System. Origins Hand Shower System. Temptrol pressure balancing valve. Adjustable stop screw to limit handle turn. ADA compliant 36" grab bar for hand shower. Without tub spout. Separate dual outlet diverter. Mfg #9605-PLR

• Origins Hand Shower System
• Temptrol pressure balancing valve
• Adjustable stop screw to limit handle turn
• ADA compliant 36" grab bar for hand shower

The Symmons Elm collection offers simple sophistication by blending sleek forms and simple lines. Constructed of high quality materials and plated in an abrasion resistant finish over solid metal, this tub and shower trim kit from the Elm suite will last a lifetime. This trim kit includes a shower arm, low flow showerhead, hand shower with a flexible 60 inch hose, tub spout, brass escutcheons, and two lever handles. With an adjustable lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use. The secondary lever controls the flow of water to the hand shower. At an eco friendly low flow rate of 1.5 GPM, the single mode showerhead allows you to conserve water and save money on your water bill, without affecting the shower's performance. This shower trim kit is backed by the Symmons Lifetime Limited Warranty and includes everything needed for installation, meaning you can update your bathroom without replacing your valve.

• Main lever handle controls tub and shower water temperature
• 1.5 GPM (5.7 L/min) low flow rate for water conservation
• In line vacuum breaker
• Non diverter tub spout
• Wall connection
• Five mode round showerhead and three mode hand shower
• Separate triple outlet diverter
• Constructed of brass, zinc, stainless steel, and plastic
• For use with pressure balancing valve 261XBODY and diverter valve 3DIVBODYSRT (not included); for 3x faster installation, use Temptrol Rapid Install Bracket and pressure balancing valve 261XBRBODY
• Backed by the Symmons limited lifetime homeowner warranty/10 year commercial warranty
• Includes showerhead, escutcheons, handles, hand shower, hose, tub spout
• Polished chrome finish

Symmons Allura Satin Nickel Shower System Trim. Valve Must Be Ordered Separately. Integral Stops Has Focused On Timeless Beauty And Classic Charm, The Symmons Allura Collection Offers Sophisticated Detailing With Bold Features. The Solid Construction And Style Give It A Distinctive Presence In Any Traditional Bathroom. Mfg #4701-STN-TRM

• Valve Must Be Ordered Separately
• Integral Stops Has Focused On Timeless Beauty And Classic Charm, The Symmons Allura Collection Offers Sophisticated Detailing With Bold Features. The Solid Construction And Style Give It A Distinctive Presence In Any Traditional Bathroom.
• Pack of 1
• Weight of the product is 3.200 lbs.

The Dia Two Handle Wall Mounted Shower Trim with Hand Spray boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim kit has the durability to add contemporary styling to your bathroom for a lifetime. The solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use for everyone. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead is WaterSense certified to conserve water without sacrificing performance, saving you money on your water bill. This model includes everything you need for quick installation. This shower trim kit includes a shower arm, low flow showerhead, handheld sprayer with 60 inch flexible hose, a slide bar for the handheld sprayer, brass escutcheon, and adjustable lever handle. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, the Symmons Dia Two Handle Wall Mounted Shower Trim with Hand Spray is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• 60 inch flexible metal shower hose & 30 inch slide bar for hand spray
• Single mode hand spray and single mode matte black showerhead
• Wall connection
• Separate two function diverter
• In line vacuum breaker
• WaterSense certification promotes water conservation
• 1.5 gpm (5.7 L/min) low flow rate for conserving water without sacrificing performance
• Tub spout not included
• Requires Temptrol Pressure Balancing Shower Valve and Symmons Dual Outlet Diverter Valve
• For use with shower valve 262BODY and diverter valve 2DIVBODYSRT (valve not included)

The Symmons Origins Single Handle Shower Trim Kit offers softer detailing and rounded features that give it a distinctive presence in any traditional bathroom. This kit comes with a Temptrol Pressure Balancing Mixing valve. The tri star handle is easy to install, and the escutcheon includes etched hot and cold indicators. The secondary handle on the cover plate controls the volume of water coming from your showerhead. This comes with everything needed for installation. This shower escutcheon and handle shower trim set is durable and functional, and backed by a limited lifetime warranty and our technical support team.

• Origins shower valve and trim with secondary integral volume control
• Includes shower trim handles and escutcheon kit
• Volume control integrated into pressure balancing valve
• Tri star handle to adjust the shower water temperature
• Tub spout and showerhead not included
• Limited lifetime warranty for consumer
• 10 year warranty for commercial use

Symmons Unity 1.5 Gpm Chrome 1-Lever Handle Tub/Shower Faucet Trim features integrated diverter on tub spout. Easy to clean rubber nozzles. The transitional design of the Unity collection showcases quality in its most graceful form. From the bath to the kitchen, the curves of the handles and spouts add a cohesive look with functional elegance. Mfg #6602-1.5-TRM

• Unity 1.5 Gpm Chrome 1-Lever Handle Tub.
• Shower Faucet Trim features integrated diverter on tub spout.
• Easy to clean rubber nozzles.
• The transitional design of the Unity collection showcases quality in its most graceful form.

The Dia Single Handle Wall Mounted Shower Trim boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim has the durability to add contemporary styling to your bathroom for a lifetime. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use for everyone. At an eco friendly low flow rate of 1.5 GPM, the single mode showerhead is WaterSense certified so that you can conserve water without sacrificing performance, saving you money on your water bill. This model includes everything you need for quick installation. This shower trim kit includes a showerhead, shower arm, escutcheon, shower lever handle, and integral volume control handle to adjust the shower water volume. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, Symmons Dia Single Handle Wall Mounted Shower Trim is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• Includes shower arm, showerhead, brass escutcheon, and handle
• Requires Temptrol Pressure Balancing Shower Valve
• WaterSense certification promotes water conservation
• 1.5 gpm (5.7L/min) low flow rate for saving water without sacrificing performance
• Tub spout not included
• For use with pressure balancing valve model S261XBODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY (valve not included)
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 Year Commercial Warranty

The transitional design of the Unity collection showcases quality in its most graceful form. From the bath to the kitchen, the curves of the handles and spouts add a cohesive look with functional elegance. For our budget-conscious customers, the Unity suite is perfect to satisfy their desire for transitional tastes with their economical sensibilities.

• Unity satin nickel tub and shower trim with secondary integral diverter
• Non-diverter tub spout
• 1-mode showerhead
• Adjustable stop screw to limit handle turn
• 1 ADA compliant metal lever handle
• For use with pressure-balancing valve model S262BODY, or for 3x faster installation, use Temptrol rapid install bracket model S262BRBODY (valve not included)
• Constructed of stainless steel, plastic and zinc
• 1.5 GPM (5.7 L/min) flow rate for conserving water without sacrificing performance
• Limited lifetime warranty for consumer; 5 year warranty for commercial use

The Symmons Origins Collection offers softer detailing and rounded features that give it a distinctive presence in any traditional bathroom. This Hand Spray and Showerhead assembly includes a shower arm, low flow showerhead, hand shower with 60 inch flexible hose, a 36 inch grab and slide bar for the handheld shower, escutcheon, adjustable lever handles, and mixing valve. The valve cover plate has hot and cold indicators to ensure custom water temperature setting with ease of use. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead is WaterSense certified to conserve water without affecting performance, saving you money on your water bill. Its rubber nozzles make the showerhead simple to clean, too. The slide bar for the handheld shower is also an ADA approved grab bar to stabilize yourself in and around your shower. This hand shower and showerhead trim kit is simple to install and comes with a limited lifetime warranty and the backing of the Symmons technical support team.

• Origins shower system with showerhead, shower arm, hand shower, slide bar, 2 escutcheons, 2 handles, valves
• 36 inch ADA grab and slide bar and 60 inch flexible metal hose
• Easy to clean rubber showerhead nozzles
• Separate two function diverter
• Constructed of brass, zinc, stainless steel, and plastic to ensure lifelong durability
• Separate dual outlet diverter
• Wall connection
• 1.5 GPM (5.7 L/min) low flow rate to conserve water
• Polished chrome finish

The ultra contemporary styling of this Duro Single Handle Wall Mounted Tub and Shower Trim Kit was inspired by the clean geometric shape of modern architecture. This tub and shower trim kit is covered in a scratch resistant finish over solid metal and includes a shower arm, low flow showerhead, diverter tub spout, brass escutcheon, and adjustable lever handle. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead conserves water without affecting performance, saving you money on your water bill. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Single Handle Wall Mounted Shower Trim is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro shower and tub trim
• Trim kit only; valve not included
• Includes showerhead, shower arm, escutcheon, handle, and diverter tub spout
• Single mode round showerhead with full spray
• Single solid brass adjustable lever handle for ease of use and temperature adjustments
• Constructed of stainless steel and brass with some plastic elements to ensure lifelong durability
• 1.5 gpm (5.7 L/min) low flow rate for saving water without affecting performance
• For use with pressure balancing valve model 262BODY
• Or for 3x faster installation, use Temptrol Rapid Install bracket model 262BRBODY
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 5 year Commercial Warranty

A transformation of 3 core product lines, the Symmons Origins Collection combines high quality with a fresh design for cost-efficient faucets and showers. Powered by Temptrol, this solutions provides easy installation and a stylish look. Trusted by professionals for over 75 years, Symmons provides the quality you expect and the looks you desire.

• Temptrol pressure balancing valve
• Adjustable stop screw to limit handle turn
• Separate 2 function diverter
• Includes wall connection, in-line vacuum breaker and 60 in. flexible metal hose
• 36 in. ADA grab/slide bar
• 1 mode hand shower
• 1 mode satin nickel showerhead
• 2.5 GPM (9.5 Lumens/minimum) standard

Symmons Origins Hand Shower Trim Kit. Valve Must Be Ordered Separately. Mfg #S-9603-PLR-TRM

• Valve Must Be Ordered Separately
• Faucet Material-Metal
• Number of Handles-2
• Product height-5.000 in.

Focused on timeless beauty and classic charm, the Symmons Allura collection offers sophisticated detailing with bold features. The solid construction and style give it a distinctive presence in any traditional bathroom. For our budget-conscious customers, the Allura suite is perfect to satisfy reconcile their desire for sleek style with their economical sensibilities.

• Allura satin nickel shower trim with lever handle and secondary integral volume control handle
• For use with pressure-balancing valve model S261XBODY, or for 3x faster installation, use Temptrol rapid install bracket model S261XBRBODY (valve not included)
• 1 ADA compliant brass lever handle
• Adjustable stop screw to limit handle turn
• Secondary integral diverter
• Constructed of brass, zinc, and plastic
• Limited lifetime warranty for consumer; 5-year warranty for commercial use

The Origins Single Handle Wall Mounted Shower Trim Kit was inspired by three Symmons core product lines. This shower trim kit consists of an escutcheon, shower lever handle, and integral volume control handle to adjust the shower water volume. This trim kit has everything needed for a fast and seamless installation. A combination of high quality and fresh design, this is a valuable addition to any modern bathroom and is backed by a limited lifetime residential warranty and a 10-year commercial warranty.

• Secondary integral volume control handle controls shower water volume
• Includes easy to clean screwless escutcheon
• Requires temptrol pressure balancing shower valve
• For use with pressure balancing valve model s261xbody
• Or for 3 x faster installation, use temptrol rapid install bracket model s261xbrbody
• Meets standards set by ADA (Americans with disabilities act) for safety and ease of use
• Limited lifetime warranty for consumer
• 10-year warranty for commercial use

Symmons Origins Single Spray 2.8" Single Wall Mounted Fixed Showerhead In Chrome. Gray Faceplate With Easy To Clean Rubber Nozzles. Single mode wall mounted showerhead. WaterSense certified. 1.75 GPM low flow rate for water conservation. 2.75 inch diameter showerhead. Limited lifetime consumer warranty; 10 year warranty for commercial use. Premium polished chrome finish. Part of the Symmons Origins collection. Mfg #96SH-RP

• Gray Faceplate With Easy To Clean Rubber Nozzles
• Single mode wall mounted showerhead
• WaterSense certified
• 1.75 GPM low flow rate for water conservation

The ultra contemporary styling of this Duro Single Handle Wall Mounted Shower and Tub Trim Kit was inspired by the clean geometric shape of modern architecture. This trim kit is covered in a scratch resistant finish over solid metal and includes a showerhead, shower arm, escutcheon, tub spout, shower lever handle, and integral volume control handle to adjust the shower water volume. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use for everyone. The single mode showerhead is WaterSense certified and runs at an eco friendly low flow rate of 1.5 GPM, so you can conserve water without affecting performance, and save on your water bill. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Single Handle Wall Mounted Shower Trim is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro tub and shower trim with showerhead and tub spout
• Trim kit only; valve not included
• 7 inch non diverter tub spout
• Single mode round showerhead with full spray
• Single solid brass lever handle for ease of use and temperature adjustments
• One lever handle on trim for water volume control
• 1.5 gpm (5.7 L/min) low flow rate for saving water without affecting performance
• 6 inch shower arm reach
• WaterSense certification promotes water conservation
• Constructed of stainless steel and brass with some plastic elements to ensure lifelong durability
• Requires Temptrol Pressure Balancing Tub and Shower Valve
• For use with pressure balancing valve model S262BODY
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S262BRBODY
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use

Constructed of solid brass, bronze and stainless steel, and featuring a piston that adjusts automatically to instantly and continually equalize or "balance" the hot and cold water pressure as demands are made elsewhere in the plumbing system. Commercial Temptrol can endure the day to day wear and tear found in applications such as education, healthcare and correctional facilities. Trusted by professionals for over 80-years, Symmons will deliver the quality you expect and the looks you desire.

• Temptrol shower trim
• Metal lever handle
• Adjustable stop screw to limit handle turn
• 2.5 GPM (9.5 l/minute) standard
• Tub spout not included
• Limited lifetime warranty for consumer; 5-year warranty for commercial use

Symmons-Allura Wall Mounted Shower Trim Kit. Allura Shower Trim Kit. Trim kit only with diverter handle; valve not included. Single brass lever handle to control flow and water temperature. Secondary integral volume control handle to control shower water volume. Includes easy clean screwless brass escutcheon. Requires Temptrol Pressure Balancing Shower Valve. For use with pressure balancing valve model S262BODY. Or for 3x faster installation, use Temptrol Rapid Install bracket model S262BRBODY. Limited lifetime warranty for consumer. 10 year warranty for commercial use. Mfg #S-66-2-LAM-TRM-RP

• Allura Shower Trim Kit
• Trim kit only with diverter handle; valve not included
• Single brass lever handle to control flow and water temperature
• Secondary integral volume control handle to control shower water volume

The Dia Single Handle Single Spray Wall Mounted Tub and Shower Trim boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim has the durability to add contemporary styling to your bathroom for a lifetime. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use for everyone. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead conserves water without sacrificing performance, saving you money on your water bill. This model includes everything you need for quick installation. This tub and shower trim kit includes a shower arm, low flow showerhead, diverter tub spout, brass escutcheon, and adjustable lever handle. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, the Symmons Dia Single Handle Wall Mounted Tub and Shower Trim is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• Single solid brass adjustable lever handle for ease of use and water temperature control
• Constructed of brass and stainless steel with some plastic elements to ensure lifelong durability
• 1.5 gpm (5.7 L/min) low flow rate for saving water without sacrificing performance
• For use with pressure balancing valve model 262BODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model 262BRBODY (valve not included)
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 Year Commercial Warranty
• Brushed bronze finish
• WaterSense

The Dia Single Handle Wall Mounted Tub and Shower Trim boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim has the durability to add contemporary styling to your bathroom for a lifetime. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use for everyone. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead is WaterSense certified so that you can conserve water without sacrificing performance, saving you money on your water bill. This model includes everything you need for quick installation. This tub and shower trim kit includes a showerhead, shower arm, escutcheon, tub spout, shower lever handle, and a handle to adjust the flow of water from the showerhead to tub spout. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, the Symmons Dia Single Handle Wall Mounted Tub and Shower Trim is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• 1 solid brass lever handle for ease of use and water temperature control
• 1 small lever handle on trim to divert water from shower to tub
• 1.5 gpm (5.7 L/min) low flow rate for saving water without sacrificing performance
• Shower Arm Reach: 6.75 inches
• WaterSense certification promotes water conservation
• Constructed of brass and stainless steel with some plastic elements to ensure lifelong durability
• Requires Temptrol Pressure Balancing Tub and Shower Valve
• For use with pressure balancing valve model S262BODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S262BRBODY (valve not included)
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Polished chrome finish

Symmons Unity 2.5 Gpm Chrome 1-Lever Handle Tub/Shower Faucet Trim has diverter tub spout. Valve Is Not Included. The transitional design of the Unity Collection showcases quality in its most graceful form. From the bath to the kitchen, the curves of the handles and spouts add a cohesive look with functional elegance. The Unity Shower Faucet trim has coordinating accessories and lavatories to outfit the entire bathroom. Mfg #6602-TRM

• Unity 2.5 Gpm Chrome 1-Lever Handle Tub.
• Shower Faucet Trim has diverter tub spout. Valve Is Not Included.
• The transitional design of the Unity Collection showcases quality in its most graceful form.
• From the bath to the kitchen, the curves of the handles and spouts add a cohesive look with functional elegance.

Focused on timeless beauty and classic charm, the Symmons Allura collection offers sophisticated detailing with bold features. The solid construction and style give it a distinctive presence in any traditional bathroom. For our budget-conscious customers, the Allura suite is perfect to satisfy reconcile their desire for sleek style with their economical sensibilities.

• Allura shower trim with lever handle and secondary integral volume control handle
• For use with pressure-balancing valve model S261XBODY, or for 3x faster installation, use Temptrol rapid install bracket model S261XBRBODY (valve not included)
• 1 ADA compliant brass lever handle
• Adjustable stop screw to limit handle turn
• 1-small handle to adjust the volume of water flow
• Constructed of brass, zinc, and plastic
• Limited lifetime warranty for consumer; 5-year warranty for commercial use
• Polished chrome finish

The ultra contemporary styling of this Duro Single Handle Wall Mounted Shower Trim Kit with Volume Control was inspired by the clean geometric shape of modern architecture. This shower trim kit is covered in a scratch resistant finish over solid metal and includes a showerhead, shower arm, escutcheon, shower lever handle, and integral volume control handle to adjust the shower water volume. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use for everyone. The single mode showerhead is WaterSense certified and runs at an eco friendly low flow rate of 1.5 GPM, so you can conserve water without affecting performance, and save on your water bill. This model includes everything you need for quick installation, allowing you to easily update your bathroom without replacing your valve. With durable features that are crafted to last and a unique, minimalistic style, the Symmons Duro Single Handle Wall Mounted Shower Trim is a seamless and valuable addition to any modern bathroom and is backed by our limited lifetime warranty.

• Duro shower trim with single mode showerhead with full spray
• Trim kit only; valve not included
• Single solid brass lever handle for ease of use and temperature adjustments
• One lever handle on trim for water volume control
• Includes shower arm, round showerhead, brass escutcheon, and handle
• Tub spout not included
• Requires Temptrol Pressure Balancing Shower Valve
• WaterSense certification promotes water conservation
• 1.5 gpm (5.7L/min) low flow rate for saving water without affecting performance
• For use with pressure balancing valve model S261XBODY
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 year Commercial Warranty

A transformation of 3 core product lines, the Symmons Origins Collection provides a stylish look in any bathroom. This Origins Single Handle Tub and Shower Faucet Trim Kit includes a round showerhead with easy to clean nozzles, shower arm, escutcheon, handle, tub spout, and valve. It allows you to easily switch between shower mode to the tub spout by pulling on the water diverter on the tub spout. Turn the shower lever handle to the hot and cold indicators on the valve cover plate to enjoy your preferred water temperature. The single mode showerhead runs at an eco friendly low flow rate of 1.5 GPM per minute and is WaterSense certified so you can conserve water without sacrificing performance, saving you money on your water bill. This tub and shower trim kit comes with everything needed for quick installation and is backed by the Symmons technical support team and limited lifetime warranty.

• Includes shower arm, round showerhead, escutcheon, diverter tub spout and handle
• 1.5 GPM (5.7 l/minute) flow rate for saving water without sacrificing performance
• Single mode showerhead with full spray
• 1 zinc metal lever handle
• Easy to clean rubber nozzles
• Showerhead face diameter 2.76 in. shower arm reach in: 6.38 in.
• WaterSense certification promotes water conservation
• Constructed of stainless steel and zinc with some plastic elements to ensure lifelong durability
• For use with valve model number 262BODY, for 3 x faster installation, use temptrol rapid install mounting bracket valve model 262BRBODY valve not included
• Meets standards set by ADA Americans with disabilities act for safety and ease of use
• Valve not included
• Backed by the Symmons limited lifetime homeowner warranty 10-year commercial warranty

The Dia Single Handle Wall Mounted Tub and Shower Trim boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim has the durability to add contemporary styling to your bathroom for a lifetime. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use for everyone. At an eco friendly low flow rate of 1.5 gallons per minute, the single mode showerhead is WaterSense certified so that you can conserve water without sacrificing performance, saving you money on your water bill. This model includes everything you need for quick installation. This tub and shower trim kit includes a showerhead, shower arm, escutcheon, tub spout, shower lever handle, and a handle to adjust the flow of water from the showerhead to tub spout. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, the Symmons Dia Single Handle Wall Mounted Tub and Shower Trim is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• 1 solid brass lever handle for ease of use and water temperature control
• 1 small lever handle on trim to divert water from shower to tub
• 1.5 gpm (5.7 L/min) low flow rate for saving water without sacrificing performance
• Shower Arm Reach: 6.75 inches
• WaterSense certification promotes water conservation
• Constructed of brass and stainless steel with some plastic elements to ensure lifelong durability
• Requires Temptrol Pressure Balancing Tub and Shower Valve
• For use with pressure balancing valve model S262BODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model S262BRBODY (valve not included)
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Brushed bronze finish

The Dia Single Handle Wall Mounted Shower Trim boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim has the durability to add contemporary styling to your bathroom for a lifetime. With an ADA compliant single lever handle design, the brass valve cover plate features hot and cold indicators to ensure custom temperature setting with ease of use. This shower trim kit includes a brass escutcheon, shower lever handle, and the necessary installation hardware. You will easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, the Symmons Dia Single Handle Wall Mounted Shower Trim is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• Includes brass escutcheon
• For use with pressure balancing valve model 262BODY (valve not included)
• Or for 3x faster installation, use Temptrol Rapid Install bracket model 262BRBODY (valve not included)
• Diverter tub spout and showerhead not included
• Backed by the Symmons Limited Lifetime Homeowner Warranty
• 10 Year Warranty for Commercial Use

The Dia Single Handle Wall Mounted Shower Trim boasts a modern sophistication to complement contemporary bathroom designs. Plated in a scratch resistant finish over solid metal, this shower trim has the durability to add contemporary styling to your bathroom for a lifetime. With an ADA compliant single lever handle design, the solid brass valve cover plate features hot and cold indicators to ensure custom water temperature setting with ease of use. At an eco friendly low flow rate of 1.5 GPM, the single mode showerhead is WaterSense certified so that you can conserve water without sacrificing performance, saving you money on your water bill. This model includes everything you need for quick installation. This shower trim kit includes a shower arm, low flow showerhead, brass escutcheon, and a lever handle. You'll easily be able to update your bathroom without having to replace your valve. With features that are crafted to last and a style that is designed to please, the Symmons Dia Single Handle Wall Mounted Shower Trim is a seamless addition to your bathroom and is backed by our limited lifetime warranty.

• WaterSense certification promotes water conservation
• 1.5 gpm (5.7 L/min) low flow rate for saving water without sacrificing performance
• Requires Temptrol Pressure Balancing Shower Valve (valve not included)
• Constructed of brass and stainless steel with some plastic elements to ensure lifelong durability
• Tub spout not included, and valve not included
• Meets standards set by ADA (Americans with Disabilities Act) for safety and ease of use
• Backed by the Symmons Limited Lifetime Homeowner Warranty and 10 Year Commercial Warranty
• Brushed bronze finish
• Backed by Symmon's limited lifetime homeowner warranty/5-year commercial warranty

The Symmons Origins Collection combines high quality with a fresh design for cost efficient showers. This trim kit includes a shower arm, low flow showerhead, escutcheon, adjustable lever handles, and non diverter tub spout. Turn the primary lever handle on the valve cover plate in the direction of the hot and cold indicators to ensure your preferred water temperature. The secondary lever handle functions as a diverter, allowing you to switch the flow of water from the showerhead to the tub or vice versa. At an eco friendly low flow rate of 1.5 Gal per minute, the showerhead helps you conserve water and save on your water bill. Its rubber nozzles make the showerhead simple to clean, too. This shower trim kit is simple to install and comes with a limited lifetime warranty and the backing of the Symmons technical support team.

• Tub and shower trim kit includes showerhead, shower arm, escutcheon, lever handles and tub spout
• Single ADA compliant lever handle to control shower water temperature
• Secondary integral diverter handle directs flow of water from shower to tub spout
• 1.5 GPM 5.7 l/minute low flow rate for conserving water without sacrificing performance
• Non diverter tub spout
• Single mode, full spray showerhead
• For use with valve model S262BODY; if service stops are needed, use model S262XBODY valve not included
• Constructed of stainless steel, plastic, and zinc
• Polished chrome finish

Symmons Origins Chrome Shower Faucet Trim. Valve Must Be Ordered Separately. Transformation Of Three Core Product Lines, The Symmons Origins Collection Combines High Quality With A Fresh Design For Cost-efficient Faucets And Showers. Powered By Temporal, This Solution Provides Easy Installation And A Stylish Look. Mfg #S-9601-PLR-1.5-TRM

• Valve Must Be Ordered Separately
• Transformation Of Three Core Product Lines, The Symmons Origins Collection Combines High Quality With A Fresh Design For Cost-efficient Faucets And Showers. Powered By Temporal, This Solution Provides Easy Installation And A Stylish Look.
• Pack of 1
• Non Hazardous

Focused on timeless beauty and classic charm, the Symmons Allura Collection offers sophisticated detailing with bold features. This Single Handle Wall Mounted Shower Trim Kit is part of the Allura collection and includes a brass escutcheon, shower lever handle, secondary diverter handle, and all installation hardware. With this shower trim kit, you'll be able to update your bathroom without replacing your valve. Turn the lever handle in the direction of the hot and cold indicators on the valve cover plate to reach your preferred water temperature. The integral diverter handle turns to direct the flow of water from the showerhead to the tub spout. This shower valve trim kit is made of brass, zinc, and plastic and is backed by a limited lifetime residential warranty and a 10-year commercial warranty.

• Secondary integral volume control handle to control shower water volume
• Includes easy clean screwless brass escutcheon
• Requires temptrol pressure balancing shower valve
• For use with pressure balancing valve model S262BODY
• Or for 3x faster installation, use temptrol rapid install bracket model S262BRBODY
• Limited lifetime warranty for consumer
• 10-year warranty for commercial use

Symmons Origins 1.5 GPM Chrome1-Handle Tub And Shower Trim Kit 5.5" Transformation Of Three Core Product Lines, The Symmons Origins Collection Combines High Quality With A Fresh Design For Cost-Efficient Faucets And Showers. Powered By Temptrol This Solution Provides Easy Installation And A Stylish Look. Symmons Tub And Shower Faucet Has Co-Ordinating Lavatory Faucets And Accessories To Outfit The Entire Bathroom. Mfg #S-9604-PLR-1.5-TRM

• Product Height-5.880 in.
• Faucet Finish-Polished Chrome
• Package Quantity-1
• TAA/BAA Compliant

Symmons offers a full selection of accessories including showerheads, hand showers, diverters, towel bars, and more. Symmons accessories are available for a wide variety of residential, commercial, and institutional applications. Trusted by professionals for over 80 years, Symmons will deliver the quality you expect and the looks you desire.

• 1-spray showerhead
• 4 in. showerhead face diameter
• Constructed of brass
• 1/2 in. NPT connection
• Female ball joint connection
• 2.5 GPM (9.5 l/minute) flow rate for consistent flow
• Polished chrome finish