ROBERTS 2057 VCT-EZ Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.

• Ideal for installation of vinyl composition tile (excluding self-stick), including tile-over-tile installation
• SBR latex, solvent-free adhesive for high initial strength and an improved environmental footprint
• For direct bond and double bond installation, bonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzo
• Covers up to 240 sq. ft. per gallon depending on trowel type, substrate, and installation conditions
• Moisture Control Adhesive - up to 8 lbs. MVER and 85% RH
• For indoor residential and moderate commercial use
• Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation
• Made in the USA

ROBERTS 5900 Ceramic Tile Adhesive is a high performance, ready-to-use, Type, Mastic for residential tile installations. This adhesive resist mold, mildew and intermittent water exposure, so it may also be used to adhere backsplash, countertops and shower walls. ROBERTS 5900 spreads effortlessly, sets quickly and is easy to clean up.

• For the interior installation of porous and semi-porous ceramic tile (wall tile up to 12 in. x 12 in. or 5 lbs. and floor tile up to 8 in. x 8 in.), porcelain wall tile (up to 6 in. x 6 in.), mosaic tile, natural stone, quarry and thin brick veneers
• Bonds with concrete, masonry, cement backer board, cement mortar beds, cured Portland cement plaster, gypsum wallboard, coated glass mat backer board, water resistant gypsum wallboard, existing ceramic or resilient tile, plastic laminate and association grade (CANPLY/APA) exterior plywood
• Ideal for direct bond installation
• Premixed and ready-to-use for faster installation
• Restrict foot traffic and moving of heavy objects for 24 to 48-hours to allow adhesive to cure properly
• Covers approximately 40 to 48 sq. ft. per gallon when applied with a 3/16 in. x 5/36 in. V-notch trowel and 20 to 30 sq. ft. per gallon when applied with a 1/4 in. x. 1/4 in. x. 1/4 in. square-notch trowel
• 1-year limited warranty
• Not for the installation of ceramic tile fixtures, green marble or lug back tile

ROBERTS 3095 High Performance Carpet Adhesive is formulated for the most demanding carpet installations. It secures most commercial carpet with rigid backings, including closed cell backings. The high solids, high tack formulation delivers a persistent bond. For interior use only, this adhesive has an extremely fast grab and is excellent for double-bond installation methods. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation.

• Commercial-grade, premium carpet adhesive for the most demanding carpet installations, and can be used for direct and double bond installations
• SBR Latex solvent-free adhesive offering high initial strength and an improved environmental footprint
• Bonds with cement, underlayment-grade plywood, vinyl composition tile free of wax, and terrazzo substrates
• Approximately 65 to 110 sq. ft. per gallon coverage for polypropylene/woven carpet and 100 to 200 sq. ft. per gallon coverage for non-woven/closed cell/enhancer carpet installations
• Moisture Control Adhesive - up to 10 lbs MVER and 90% RH, formulated with 70-73 % high solids content
• For indoor residential and commercial use, ready for use, does not require mixing
• Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation.
• Made in the USA
• Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168