The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

The SharkBite 18 in. x 3/4 in. Push-Fit x 3/4 in. FIP Corrugated Stainless Steel Water Heater Connector is the fastest way to connect your Water Heater to your plumbing system. Apply thread tape to the Pipe Nipple on the Water Heater thread the 3/4 in. FIP Swivel nut onto the Water Heater and tightens with wrench and connects the 3/4 in. SharkBite end to Copper, PEX, or CPVC pipe. No Solder or additional fittings are needed when using the SharkBite Connection system.

• Corrugated stainless steel
• Use to connect to any combination of copper, PEX, or CPVC pipes
• Innovative push-fit design makes for quick and easy installation
• Eliminates the need for additional transition fittings
• No solder or glue required to install
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Meets IAPMO, UPC, IPC and cUPC requirements
• Lead free
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• 3/4 in. PTC x 3/4 in. FIP x 18 in.
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

The 1/2 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX, or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue, or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC, and cUPC requirements
• 1/2 in. Pipe Insertion Depth = 15/16 in.

SharkBite Push-to-Connect x Female Pipe Thread Water Heater Connection Kit is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi

The 3/4 in. x 18 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX, or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue, or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC and cUPC requirements
• 3/4 in. pipe insertion depth - 1-1/8 in.

The 3/4 in. x 12 in. SharkBite water heater connector allows you to easily connect your hot and cold-water supply lines to your water weater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the water heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite push-fit end onto copper, PEX, or CPVC pipes and your water heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. available with integrated ball valve) and are also available in corrugated stainless steel. SharkBite water heater connectors will decrease the amount of time and effort needed to install a water heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX, or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC and cUPC requirements
• Demount Clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

The 3/4 in. x 24 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX, or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue, or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Lead free
• 3/4 in. pipe insertion depth = 1-1/8 in.

3/4 in. x 15 in. SharkBite water heater connector allows you to easily connect your hot and cold-water supply lines to your water heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the water heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite push-fit end onto copper, PEX or CPVC pipes and your water heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in., 24 in. (18 in. available with integrated ball valve) and are also available in corrugated stainless steel. SharkBite water heater connectors will decrease the amount of time and effort needed to install a water heater in your home and are the fastest way to complete your project.

• Lead-free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and Listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 3/4 in. pipe insertion depth 1-1/8 in.

The 1/2 in. x 12 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC and cUPC requirements
• Lead free
• 1/2 in. pipe insertion depth 15/16 in.