Searched for "39121300"
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Nonmetallic in-use device covers provide weatherproof protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Horizontal or vertical mount
- Lockable tab (1/4 in. shackle)
- Extra duty rated
- 16-in-1 configurations
- 2-3/4 in. deep
- NEMA 3R compliant
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Welded construction
- Eleven 1/2 in. knockouts
- UL Listed
- 11.5 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The Carlon Super Blue New Work Round 14.5 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated to help ensure safety.
- Designed to not break or crack, even in extreme environments
- Made of heat-resistant thermoplastic material
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- 2-hour fire rating
The Junction Box is made from plastic and is CSA and UL listed with a NEMA 6P rating per Section 314.29, Exception of the NEC. It features a foam-in-place gasket lid with stainless steel screws. The box is designed to provide protection against external ice formation, falling dirt, hose-directed water and water entry during prolonged submersion.
- For indoor and outdoor use
- Plastic construction
- Foam-in-place gasket lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA type 6P and type 4/4X ratings
- CSA and UL listed and fire rated to help ensure safety
Unique design and unmatched versatility. The light Fxture Smart Box is a unique ceiling product with a UL listed rating for 50 lbs. light Fxture support. It is the only nonmetallic ceiling box that includes two 1 in. #8 Fxture support screws. This product is extra deep for mounting all smoke and carbon monoxide detectors. It is also quick and easy to remove for wiring between floors, cathedral ceilings and inaccessible attics. Ideal for upgrading light Fixtures to light paddle fan combos, this 1 of a kind product has unmatched versatility that is immediately recognized by the electricians in the field.
- Quicker to install than a nail on box
- Easily upgraded to a MSBFAN product
- Easily removed without creating damage to wall
- Extra thick wall material creates stability and rigidity
- Factory installed two #8 x 1 in. Phillips/slotted screw
- RoHS compliant
- UL Listed
- Material: polycarbonate
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1-piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
High impact resistant thermoplastic Round Floor Box cover. Non-Metallic, for use with Duplex Devices. Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles.
- Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles
- Approved for all types of finish flooring
- UL scrub water tested
- UL E11461
The Super Blue New Work Round 25 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. Box is mounted on adjustable 11-1/2 in. to 18 1/2 in. hanger bar. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety. Ground lug included.
- Listed for fixture support up to 50 lb.
- Not recommended for use with ceiling fans
- Thermoplastic construction designed to not break or crack, even in extreme environments
- Hanger bar adjusts from 11-1/2 in. to 18-1/2 in. for versatility
- 3/0 and 4/0 mounting holes
Used to cover handy boxes or as a wall plate for single gang boxes. Cover a single GFCI. Designed with rounded corners to match the contours of a handy box.
- Durable pre-galvanized steel construction
- Captive mounting screws included
- Cover measures 2-3/8 in. W x 4-1/4 in. tall
- Used with GFCI receptacle
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Use with AC/MC or flexible cable
- Combination screw heads allow quick installation
- Welded construction
- (3) 1/2 in. knockouts, 1 TKO knockout and 4 cable payouts
- UL Listed
- 21.0 cu. in. capacity
- FS style bracket, flush
The Zip Box Blue 3-Gang 44 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- For use in residential and light commercial new construction
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL listed
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 5/8 in. raised
- UL Listed, CSA
- 4.5 cu. in. capacity
The 1-Gang 19 cu. in. Type-FSC FS Box is designed for through terminations. It is made with non-corrosive PVC for durability and features detachable mounting feet for easier installation. The box is UL Listed to help ensure safety.
- For use with through terminations
- Non-corrosive PVC construction
- UL listed for safety
- Takes standard covers and accessories
- Can also take standard devices
- Detachable integral mounting feet for easier installation
The 2-Gang 32 cu. in. Type-2FSE FS Box is designed to take standard covers and accessories. It is made with non-corrosive PVC and is used for through terminations where 2 devices or additional wiring capacity is required. The box has integral mounting feet for easier installation and is fire rated and CSA and UL Listed for safety.
- For through terminations where 2 devices or additional wiring capacity is needed
- Non-corrosive PVC construction
- Takes standard covers and accessories
- CSA and UL listed and fire rated to help ensure safety
- Integral mounting feet for easier installation
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Solid base fan box is used for mounting a ceiling fan when extending an electrical circuit from an existing switch or receptacle
- Base has two 1/2 in. trade sized knockouts
- Ivory finish
- Paintable and stainable using latex based products
- UL listed
TayMac covers expandable design provides weatherproof protection when an outlet is in use. Made from rugged polycarbonate & synthetic neoprene rubber. cULus compliant.
- Revolutionary design expands from 1" to 3" for in use needs
- 100% paintable surface
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with UFAST knock-out technology for alternate devices
- 16-in-1 configurations
- Includes gasket and mounting hardware
- NEMA 3R compliant
The 90 cu. in. Non-Metallic Floor Box Base allows for various thicknesses of concrete pours. It is made with PVC and features a leveling ring that guarantees a level top, even if the box is tipped slightly during the pouring process. The base is CSA and UL listed and fire rated for safety.
- Minimum concrete depth is 3-1/2 in.
- Durable PVC construction
- Leveling ring ensures a level top during concrete pouring
- 2-1 in. and two 3/4 in. hubs
- Two 1 in. x 3/4 in. and two 3/4 in. x 1/2 in. reducer plugs
- Fire rated and CSA and UL listed to help ensure safety
Bell offers a selection of weatherproof boxes that are made of rugged, seamless die-cast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged die-cast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
The Receptacle Drop-in Floor Box Kit combines many of the same features in our existing floor box line with the strength, durability, and style necessary to accommodate today's residential electrical and telecommunication needs. The Drop-In Floor box kit is the fastest way to put a floor socket anywhere power is needed. Designed to accommodate high and Low-Voltage applications and comes complete with everything needed for installation.
- Includes brass cover and pre-wired single receptacle
- Comes with Low-Voltage telephone/cable plate and one blank plate
- Hole saw included
- UL listed for safety
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 10.5 cu. in. capacity
- 1 screw, plaster ears
For multiple through circuit terminations, use the 1-Gang 19 cu. in. Conduit FS Box. This conduit box offers a PVC construction and three 3/4 in. port holes.
- Designed to offer additional support for stub-up
- PVC construction ensures prolonged use
- Suitable for both indoor and outdoor use
- Detachable mounting feet provide easy installation
- 3-3/4 in. port holes for versatile wiring access
- FSCC box accepts standard covers and devices
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1-piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
Manufactured from durable pre-galvanized steel. Designed to add additional cubic capacity to an electrical box. UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- Popular for exposed work applications
- Key holes provided for ease of installation
- Supplied with 8-1/2 in. knockouts
- 13.0 cu. in. capacity
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 12.5 cu. in. capacity
- Plaster ears
TAYMAC in-use device covers provide weatherproof protection when an outlet is in use. In-use covers are made are made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Patented quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Horizontal or vertical mount
- Lockable tab (1/4 in. shackle)
- 16-in-1 configurations
- 2-3/4 in. deep
- NEMA 3R compliant
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
Covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.
- Device mounts to cover
- Made from zinc, pre-coated, steel
- 10.3 cu. in. capacity
- Hardware and cover are packed in a poly-bag with printed catalog number, compliances and installation instructions
Bell offers a selection of weatherproof boxes that are made of rugged, seamless die-cast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged die-cast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 18.3 cu. in. capacity
- NEMA 3R rated
- 2 in. deep
Octagon boxes are manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel octagon boxes are UL listed and acceptable for use in 2-hour fire rated walls. 8-32 fixture-mounting screws are assembled.
- 4 in. x 1-1/2 in. D
- Drawn steel construction
- "L" clamps provided with nonmetallic sheathed cable (NMSC)
- Includes "J" bracket for mounting to metal or wood joists with 3/8 in. or 1/2 in. set back
- 15.5 cu. in. capacity
BELL Weatherproof device covers provide protection to an outdoor receptacle or switch. Covers are made from superior commercial quality die-cast metal. The premium powder coat finish provides corrosion resistance. A gasket, mounting hardware and instructions are included.
- Quick-Fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with knock-out technology for alternate devices
- Lockable tab
- 12-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R compliant
The Westinghouse Fan Master Jr. Non-Metallic Support Box allows you to safely and securely attach a lighting fixture or ceiling fan to a building's structural support. The fixture or ceiling fan is supported by the joist, not the box. Perfect for new construction, the Fan Master Jr. can be used in applications where duct work or wiring is present. The design features 13.4 cu. in. wiring capacity on only 1 side of the box, so the Fan Master Jr. can be installed on either side of a joist without having to split the wiring. It includes 2 knockouts for conduit or Romex, 1 Romex connector and 1 Romex clamp. The Fan Master Jr. is UL Listed for fixture support of 150 lbs. or less and ceiling fan support of 70 lbs. or less. The box works with any model of ceiling fan and has a 2-hour fire rating. Fan Master Jr. can be mounted on standard joists as well as wider joist configurations where a saddle style box will not fit. Product reference number 02525.
- Fan master Jr. support box allows safe, simple installation of fans and fixtures in new construction
- Fits any ceiling fan up to 70 lbs. or lighting fixture up to 150 lbs.
- Built-in tabs allow for hands free installation, saf-T-cap protects bolts and wires during painting and drywall installation
- Design provides additional wiring space on 1-side of the box, simply mount to either side of a joist
- UL Listed for safety, 2-hour fire rating
- Includes fan master Jr. with saf-T-cap, Romex connector and mounting hardware
- Electrical box measures 4 in. H x 1/2 in. D, 13.4 cu. in. capacity
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with AC/MC/Flex cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 12.5 cu. in. capacity
- Pester ears, old work, Griptite
The Vertical 49 cu. in. PVC 3-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Ideal for various drywall thicknesses and wall finishes
- Includes mounting hardware
- Convenient adjustable bracket for ease of installation
- Adjusts from 0 in. to 1-3/4 in. D
- Thermoplastic construction resists rust and won't conduct electricity
- UL listed and 2-hour fire rating for safety
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
"Add-a-Depth" switch box ring allows you to adjust the depth of a switch box when it was incorrectly installed into the wall. The ring acts as a barrier between combustible wall surfaces and the wiring system. It has an adjustment range of 1/4 in. - 1 in.
- Steel construction
- Includes two 1-1/8 in. screws
- 1 or 2-gang device boxes
- Subject to acceptance by an electric inspector
Weatherproof device covers are designed to provide protection for an outdoor receptacle. Covers have a self-closing lid. Covers mount to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- GFCI
- Vertical mount
- Rugged metallic construction
- NEMA 3R compliant
- Installation hardware, gasket and multilingual instructions are included
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes are pre-tapped to accept 6-32 device screws.
- Fourteen 1/2 in. and 3/4 in. concentric knockouts
- Standard device spacing with tapped 6-32 holes for devices
- Welded construction
- 60.0 cu. in. capacity
Manufactured from durable pre-galvanized steel. Designed to cover and protect electrical wiring, switches and receptacles. cULus Listed. Captive device screws provided.
- Made from zinc, pre-coated, steel
- Toggle switch
- Captive mounting screws included
- cULus Listed
Provides protection for an outdoor receptacle or switch. Made from superior commercial quality die-cast metal. Premium powdercoat finish provides corrosion resistance. Includes a gasket, mounting hardware and instructions.
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Pre-configured for GFCI with knock-out technology for alternate devices
- Lockable tab
- 12-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R Rated