SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248

• Can Be Installed On Wet Lines And Pressure Tested Immediately.
• Stainless steel retainer adds strength and durability.
• High-performance DZR lead-free brass body.
• No special tools, crimping, soldering or glue required.

Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

Sharkbite Max Flex Water Heater Connector 1/2" X 3/4"Fip X 18". Mfg #UR3068FX18

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

Sharkbite Max Flex Water Heater Connector 1/2" X 3/4"Fip X 24". Mfg #UR3068FX24

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

Sharkbite Sharkbite Max Flex Coupling Hose 3/4" X 18". Mfg #UR3016FX18

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

• The Rheem Professional Classic 28 Gal. Electric short water heater provides an ample supply of hot water for households with 1 to 2 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional Classic 28 Gal. Lowboy 6-Year 240-Volt 4500-Watt Electric Tank Water Heater, Top T&p Valve
• Electric Water Heater Is Easy To Maintain
• Delivers 45 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Temperature And Pressure Relief Valve Included
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE28 S2 RH95 (CP)

Use this plastic drain pan under your electric water heater to help prevent damage to finished surfaces in the event of a leak from your water heater. It is constructed of durable, flexible polypropylene that will not corrode or crack while installing the water heater. It has a pre-cut drain hole and the PVC fitting is included. It should be plumbed to the outside of the structure, away from finished surfaces, if the water heater is installed inside of the structure or elsewhere where a leak from the unit could cause damage to finished surfaces.

• Made for use under an electric water heater
• Injection-molded polypropylene plastic
• Recyclable
• Black
• PVC drain fitting included
• 28 in. I.D.
• 30 in. O.D.
• Pre-cut drain hole
• Non-toxic
• Recommended that pan has an inside diameter 2 in. - 4 in. larger than the diameter of your water heater tank

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

• The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
• Rheem Professional 38 Gal. 240-Volt 4500-Watt Short Residential Electric Water Heater
• Delivers 51 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Short Tank Fits In Tight Applications
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• With ProtectionPlusâ„¢ the 6-year limited tank warranty becomes 10-year
• MFG# PROE38 S2 RH95 B (4500W/240V)

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.

• Secures expansion tank to wall
• Galvanized and stainless steel construction
• Supports tanks up to 13 in. Dia
• Supports tanks up to 5 Gal.
• Includes mounting bracket, 2 support straps and mounting screws
• Quick-release stainless steel bands
• Fast and easy installation
• Takes load weight off pipes
• HOLDRITE quick strap brand
• Water heater accessories

• The Rheem Classic 40 Gal. Natural Gas 38000 BTU/hour environmentally friendly Ultra Low-NOx radiant burner that provides ample hot water for households with 2 to 4 people. A piezo ignition system enables safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.
• Rheem Professional Classic 40 Gal. Tall 38,000 BTU Low NOx Natural Gas Water Heater
• California & Utah Residents (Utah Effective 7/1/18): This Water Heater Model Meets Or Exceeds Ultra-Low Nox (Uln) Emissions Requirements For All Air Quality Management Districts
• Rated For Installations Up To 10,000 Ft.
• Exclusive Air/Fuel Shut-Off Device For Double Protection
• With Protection Plus The 6-Year Limited Tank Warranty Becomes 10-Year
• Ultra-Low Nox Radiant Burner Design
• Premium Grade Anode Rode Provides Long-Lasting Tank Protection
• 6-Year Limited Tank And Parts Warranty
• Maintenance Free - No Filter To Clean
• No Matches Required
• More Hot Water At A Low Operating Cost
• With Protection Plus The 6-Years Limited Tank Warranty Becomes 10-Years
• Uniform Energy Factor (Uef) 0.58
• Everkleen Patented System Fights Sediment Build-Up
• Enhanced-Flow Brass Drain Valve
• MFG# PROG40-38U RH62 EC1-1

• A. O. Smith ProMax Electric Water Heater. 28 Gal. Lowboy. 20" Dia x 30". Top Water Connections And Top TP Valve. 240 Volts 4500 Watt Long-Life Stainless Steel Elements. DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life. Blue Diamond Tank Lining Provides Protection Against Leaks. CoreGuard Anode Rod Is Industry-Leading Anode Technology To Extend Useful Life. Full-Flow Tamper-Resistant Brass Drain Valve. 0.89 Uniform Energy Factor. Meets 2015 NAECA Efficiency Standards. For Top-To-Side TP Drain Connection Use With HDS #730092 Conversion Kit. 8-Year Warranty For Units Purchased After 1/31/2021. Mfg #ENLB-30
• A. O. Smith ProMax Electric Water Heater
• 28 Gal
• Lowboy
• 20" Dia X 30"
• Top Water Connections And Top T&p Valve
• 240 Volts, 4,500 Watt Long-Life Stainless Steel Elements
• Dynaclean Diffuser System Reduces Sediment Buildup, Extending Tank Life
• Blue Diamond Tank Lining Provides Protection Against Leaks
• Coreguard Anode Rod Is Industry-Leading Anode Technology To Extend Useful Life
• Full-Flow Tamper-Resistant Brass Drain Valve
• 0.89 Uniform Energy Factor
• Meets 2015 Naeca Efficiency Standards
• For Top-To-Side T&p Drain Connection Use With Hds #730092 Conversion Kit
• 8-Year Warranty (For Units Purchased After 1/31/2021)
• MFG# ENLB-30

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.

• Made from durable polypropylene plastic
• Will not corrode or crack
• 26 in. ID
• 28 in. OD
• 1-1.5 in. PVC fitting included
• Pre-cut side outlet
• Recyclable
• Non-toxic
• Black finish
• Use with electric water heaters only

The Rheem Performance 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6 year limited tank and parts warranty plus a 1-year in home labor warranty.

• Washington and Oregon residents: your home is in a state that requires demand response water heaters, if this water heater does not meet demand response requirements, please select an approved demand response model available on homedepot.com.
• 40 Gal. tank provides ample hot water for households with 2-people to 4-people
• Electric water heater is easy to maintain
• Delivers 53 Gal. of hot water in the first hour
• 6 year limited warranty on tank and parts for your convenience
• 1 year in home labor warranty for peace of mind
• Automatic thermostat keeps water at your desired temperature
• Dual 4500-Watt heating elements
• Designed for easy replacement of your existing water heater
• Requires a 240-Volt connection for installation
• Medium tank profile fits in a variety of indoor spaces
• Uniform energy factor 0.93
• Now features a brass drain valve for added resiliency & durability
• Meets 2015 NAECA Standards

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2-passes)

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

The Camco 22 in. I.D. plastic water heater pan is made for use under electric water heaters to help protect your floors from leaks or runoff from T and P valve activation. It is made from durable polypropylene plastic and comes with a 1-1/2 in. PVC drain fitting. A drain opening is set in the side to allow you to direct any water to the outside or to the nearest drain.

• Made from durable polypropylene plastic
• 20 in. inside diameter
• 22 in. outside diameter
• Will not rust, corrode, or crack
• Recyclable
• Non-toxic
• Pre-cut side outlet
• Includes PVC drain fitting
• Black finish

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (4-passes)