Searched for "40141616"
Nibco ACR Copper Coupling
- 0.5" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #039923306944
- 0.5" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
AM-1 series adjusts, maintains and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.
- Offers constant water temperature under changing operating conditions
- Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
- Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
- Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
- Features dual purpose mixing or diverting values
- Lead free products have products numbers end in LF
- Available temperature gauge adapter in lead-free brass material with EPDM O-ring
- Maximum safe operating pressure (psi)150 psi
- Minimum flow rate (gpm) 0.5 GPM
- Includes check valves on hot and cold ports
Nibco ACR Copper 90degree Elbow. 0.88" Od. Dezincification Resistant. NFPA 99 Health Care Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #9055600
- 0.88" Od
- Dezincification Resistant
- NFPA 99 Health Care Facilities Gas And Vacuum Systems
- Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- This fitting includes a split ring and a stainless steel insert. It's also self-flaring, which means no flaring tool is needed.
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Self-flaring design ensures versatile use
- Metal-to-metal seal for durable and reliable operations
- Features 33% more sealing surface than contemporaries
- Made of high-grade brass for enhanced strength
Danfoss -- Straight Valve Body. For Ra2000 Units. Connection: 1/2" Npt.
Quiet operation. Self-aligning barrel-type valve stem uses line pressure to seal off without binding on opening and closing. Valve stem made of stainless steel. Automatic recycling manual operator shows valve position at all times. Built-in auxiliary contacts to control burner or circulator relay. Motor can be removed from valve assembly without draining system.
- Made of corrosion-resistant stainless steel for longer life
- Motor can be removed without draining the system for quick and easy replacement
- Screw terminal wiring panel for easy install
- Quiet operation
- Time cycle: 45 seconds to open; 45 seconds too close
- 15 psi maximum differential across valve
- 3/4 in. tubing size
Nibco ACR Copper 45degree Elbow. 0.88" Od. Dezincification Resistant. NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #9042900
- 0.88" Od
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems
- Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
Danfoss Aveo Tamperproof Sensor
- Easy To Use
- Thermostatic Radiator Valve
- Mfg #015G4240
- Easy To Use
- Thermostatic Radiator Valve
- Tamperproof
- Danfoss Aveo
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.
- Standard checkout procedure
- Robust push terminals
- Common-Sense LEDs
- Clean, professional installation
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 40 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 6.4"
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Patent no. 5,988,201
- Light weight
- Proven durability
- Easy to install
- No clog vent
- 360 degree adjustable collar ring for installation flexibility
- Stainless steel concentrator which eliminates gurgling noise
Nibco Copper Coupling
- 0.5 x 0.5" Copper Coupling
- With Stop
- Mfg #039923307644
- 0.5 x 0.5" Copper Coupling
- With Stop
- 9002003
- 1-1/2" X 1-1/2"
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
Danfoss Aveo Sensors, Electronic, Sensor type. Easy To Use. Thermostatic Radiator Valve. Built in Tamper Proof. 015G4290. Mfg #015G4290
- Easy To Use
- Thermostatic Radiator Valve
- Built in Tamper Proof
- 015G4290
Honeywell Home's 802360JA/U is a 24-Volt replacement motor for V8043/44 zone valve. It is the ideal choice for contractors because of its easy installation. When it comes to top quality, Honeywell Home's zone valves can be trusted.
- Valve includes motor mounting screw and lead connectors
- Used with V8043A, V8043E, and V8043F
- Frequency-50 Hz, 60 Hz
- 24-Volt electrical connections
- Electrical connections - 6 in. leads; 152 mm leads
The 5000 Series Mixing Valve is a dual purpose mixing or diverting valve. It is ASSE 1017 approved, providing shut-off reliability on either a hot or cold water supply failure. The high flow and low headloss characteristics make the 5000 Series ideal for domestic water, radiant applications, installations with large variations in flow rate and supply conditions, and installations requiring tightly controlled water temperature. The valves unique design and advanced thermostatic element ensures a stable mixed water temperature throughout the extended 85Ëš-150ËšF range. The 5000 Series provides fail-safe security and the ultimate performance in a mixing valve.
- Fail-Safe on Hot or Cold Supply Failure
- Delivers Stable Mixed Water Temperature
- Outlet temperature strip
- ASSE 1017 Certified
- Dual Purpose Mixing or Diverting Valve
- Ideal for Domestic Water and Radiant Applications
- Tamper-Proof Cap
- To be used with: low temperature and radiant systems, domestic hot water
Nibco ACR Copper Reducer Bushing. 0.88 X 0.75" Od. NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #108286
- 0.88 X 0.75" Od
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- ACR Copper Reducer Bushing
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
Supco Totally Enclosed Fan Motor Relay. Inductive: 8 Amp Continuous. Mfg #90380
- Inductive: 8 Amp Continuous
- Product Height: 1.750 In.
- Product Weight: 0.230 Lbs.
- Non Hazardous
Danfoss Part # 013G8042 1/2" Or 013G8044 3/4" Solder Union Straight Valve Body For Ra2000 Units. Conforms To Ansi/Ashrae Standard 102-1983
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 20 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 20 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4"
Nibco ACR Copper 90degree Long Radius Elbow C x C
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Mfg #108283
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- with stop
Watts 1 IN Lead Free Reduced Pressure Zone Backflow Preventer Assembly Features Flood Sensor With Sentryplus Alert Technology To Detect Excessive Water Discharges From The Relief Valve Alert features available with add-on sensor connection kit Lead free copper silicon alloy body NPT inlet and outlet connections Quarter turn full port resilient seated ball valve shutoffs Single access cover and modular check construction for the ease of maintenance Internal relief valve for reduced installation clearances Replaceable seats for an economical repair Test cocks are screwdriver slotted Mfg #88004112
- Features Flood Sensor With Sentryplus Alert Technology To Detect Excessive Water Discharges From The Relief Valve
- Alert features available with add-on sensor connection kit
- Lead free copper silicon alloy body
- NPT inlet and outlet connections
Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.
- Standard checkout procedure
- Robust push terminals
- Common-Sense LEDs
- Clean, professional installation
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
The Taco Zone Valve Controller gives you the ability to control up to 4 zone valves at one time. Taco control's easy-to follow PC board layout eliminates the problems caused by incorrect wiring, while the external indicator lights provide instant diagnostic feedback. 24-Volt Power Output for hard wired thermostats built-in.
- Controls 4 zones
- Built-in switchable priority
- External indicator lights
- Simplified wiring
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.
- All models may be installed without disassembling the valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- Valve returns to automatic position when power is restored
- Compact construction for easy installation
2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Watts 1 IN Lead Free Anti-Siphon Pressure Vacuum Breaker Backflow Preventer Includes A Freeze Sensor For Use With Sentryplus Alert Technology To Signal Facility Personnel When Temperature Nears And Reaches The Freezing Point Available freeze sensor connection kit to activate a monitoring system that trigger alerts for low and freezing temperatures Lead free construction Replaceable seat Female NPT inlet and outlet with quarter turn shutoffs Easy internal access Mfg #T792012
- Includes A Freeze Sensor For Use With Sentryplus Alert Technology To Signal Facility Personnel When Temperature Nears And Reaches The Freezing Point
- Available freeze sensor connection kit to activate a monitoring system that trigger alerts for low and freezing temperatures
- Lead free construction
- Replaceable seat
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Patent no. 5,988,201
- Light weight
- Proven durability
- Easy to install
- No clog vent
- 360 degree adjustable collar ring for installation flexibility
- Stainless steel concentrator which eliminates gurgling noise
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Electrical connections (in.) screw terminal block
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- Valve designed for cycling (not constantly powered on) applications
- Quick fit pushbutton powerhead makes it easy to remove for service
- Innovative motor technology offers silent operation, water hammer resist and longer life
- Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
- Easy to install and operate
Single zone switching relay should be standard equipment for every installer. No matter what type of job, our single zone switching relay replaces every brand made by every manufacturer. The single zone switching relays are compatible with conventional and programmable thermostats, ul listed and come with a 3-year warranty. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups.
- Compact design
- UL and CSA approved
- 3 year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
Nibco ACR Copper 90degree Long Radius Elbow
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Mfg #9080400
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- with stop
3 ZONE VALVE CONTROL
- Controls (3) Zones
- Built in Switchable Priority
- External Indicator Lights
- Simplified Wiring
Nibco Copper Coupling. Mfg #9020400
- 0.75" Inlet
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Without Stop
This 3/4 in. hot water extender tempering valve is designed for domestic water supply systems and recommended for tankless heater, water heater, and solar applications installed at or near the boiler or hot water heater. It consists of a lead free brass body, solder connections, thermostat, stainless steel springs, and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The temperature range is 120 to 160 degree F (49 to 71 degree C).
- Lead free brass body construction
- Solder connections
- Thermostat assembly is easy to maintain, remove and replace
- Dial adjustment cap
- Designed for domestic water supply systems and recommended for tankless heater, water heater, and solar applications installed at or near the boiler or hot water heater
- Temperature range is 120 to 160 degree F
- High capacity for size
Honeywell AMX series Direct Connect reduces water heater installation time as the cold and hot port position eliminates the need for typical elbows and tees. New design requires a maximum of just two sweat connections. Requires fewer parts than previous models.
- Designed to be directly installed on water heater hot outlet port
- Offers constant water temperature under changing operating conditions
- Temperature is adjustable using 3/16 allen wrench and if cold water supply is interrupted, flow reduction occurs in seconds
- Features brass/stainless construction and Teflon coated of wear surfaces
- Alternate hot port bypasses hot water directly from the tank to non-mixed temperature applications
- Maximum safe operating pressure 150 psi
- Operating temperature range (F)33 degree F to 80 degree F (cold water inlet); 100 degree F to 212 degree F (hot water inlet)
- Minimum flow rate (GPM) 0.25 GPM; recirculation port: 1/2 in. NPT; alternate hot port: 1/2 in. NPT
- Fluid temperature (F) mixed water supply--100 degree F to 145 degree F
- Capacity 2.3 Cv
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.
- All models may be installed without disassembling the valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- Valve returns to automatic position when power is restored
- Compact construction for easy installation
This 3/4 in. steam radiator valve is used as a shutoff valve in steam or hydronic heating systems. It features a bronze body and angle pattern with FIP x male union connections.
- Bronze body
- Angle pattern
- FIP male union connections
- Rising stem
Nibco ACR Copper Coupling
- 0.75" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #039923307125
- 0.75" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water