Searched for "40141725"
Oatey Copper Tube Straps enable flush mounting of the pipe to the wall, joist and rafters. Made of copper-plated steel, these tube straps are available in a variety of pipe sizes and are designed for use with copper, CPVC and PEX piping systems. Pre-drilled holes allow for fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 2 in. copper tube strap
- Allows pipe to be flush mounted to walls, joists and rafters
- Made of copper-plated steel
- For use with copper, CPVC and PEX piping
- Fits 1/2 in. pipes
- Pre-drilled holes allow for fast screw installation
- For warranty product details, refer to the Oatey Limited Warranty document
The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.
- Used for framing and mounting and for constructing load centers and vertical pipe supports
- Can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays
- Gold-galvanized finish
- Designed for use with electrical conduits and mechanical piping
- 12-Gauge, half-slot construction
- Each piece is 10 ft. l
- 1-5/8 in. x 1-5/8 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers
Sioux Chief 506 series wire pipe hooks shall be used where necessary to secure CTS tubing and IPS piping overhead from ceiling or floor joists in residential applications. Wire pipe hooks shall be made of 10-Gauge material and offered in plain steel, copper plated steel or vinyl coated steel options. Wire pipe hooks shall feature 20 degree wow-bend at the prong for easier installation into the wood joist.
- Install wire pipe hook with hammer, striking each prong at wire bend
- Drive prongs in evenly
- Follow local or national codes when determining hanger spacing requirements
- Materials: 10-Gauge wire (.135 in.)
- Temperature rating: melting point: 200F (93C) vinyl-coated models only
- Features 20 wow-bend
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Fine surface
- No special tool required
- Durability
- Style is attracting
- Wide selection
- Great value
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Fashion design
- User friendly
- Easy installation
- Durability
- Wide selection
- No special tool required
Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Channel is made of 14 Gauge, 1-5/8 in. x 13/16 in., by 10 ft. Half Slot Steel with 9/16 in. x 1-1/8 in. Slots on 2 in. Centers.
- 10 ft.
- 14-Gauge
- Slots on 2 in. centers
- Gold
- 1-5/8 in. x 13/16 in.
- Corrosion resistant
The Danco 1-3/4 in. kitchen sink hole cover is used to cover unsightly holes in the sink when the spray head or soap dispenser is not in use. This sink hole plug features a 3 in. threaded shank design and a 1-3/4 in. O.D. flange cover that requires no tools to install (only silicone caulk is needed to create a watertight seal). The design of this faucet hole cover fits most standard size kitchen sink holes. The stylish finish will compliment your existing fixtures and the durable plastic construction is resistant to rust providing a long last performance.
- DISCREETLY COVER SINK HOLES: Brushed Nickel finish provides a stylish look to the sink plug in order to hide extra kitchen sink holes that are no longer needed from the spray head or soap dispenser
- RUST RESISTANT: Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures
- EXTRA DEFENSE: Removed post style basket with kitchen sink hole cover catches unwanted debris
- DIMENSIONS: 3 in. long shank x 1-3/4 in. outer diameter flange - threaded 1/2 in. shank design
- STYLISH DESIGN: Smooth flange cover in brushed nickel finish provides an aesthetic that will match your current kitchen appliances
- Installation tip: to install, the only tool required is silicone caulk - place silicone caulk on the underside of the faucet hole cover and tighten the putty cup and shank nut underneath the sink to create a watertight seal around the faucet hole
- Brushed Nickel finish provides a stylish look
The Danco 1-3/4 in. kitchen sink hole cover is used to cover unsightly holes in the sink when the spray head or soap dispenser is not in use. This sink hole plug features a 3 in. threaded shank design and a 1-3/4 in. O.D. flange cover that requires no tools to install (only silicone caulk is needed to create a watertight seal). The design of this faucet hole cover fits most standard size kitchen sink holes. The stylish finish will compliment your existing fixtures and the durable plastic construction is resistant to rust providing a long last performance.
- DISCREETLY COVER SINK HOLES: Chrome finish provides a stylish look to the sink plug in order to hide extra kitchen sink holes that are no longer needed from the spray head or soap dispenser
- RUST RESISTANT: Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures
- EXTRA DEFENSE: Removed post style basket with kitchen sink hole cover catches unwanted debris
- DIMENSIONS: 3 in. long shank x 1-3/4 in. outer diameter flange - threaded 1/2 in. shank design
- STYLISH DESIGN: Smooth flange cover in chrome finish provides an aesthetic that will match your current kitchen appliances
- Installation tip: to install, the only tool required is silicone caulk - place silicone caulk on the underside of the faucet hole cover and tighten the putty cup and shank nut underneath the sink to create a watertight seal around the faucet hole
- Chrome finish provides a stylish look
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Fashion design
- User friendly
- Easy installation
- Durability
- Wide selection
- No special tool required
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Perfect for hanging bundles of PEX
- Good for supporting vent pipe in attics
- Releasable locking mechanism
- Graduated numerals at nail ways for easy measuring
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- Alternating bolt holes and nail holes
- 0.75 wide
- 40# maximum static working load
- Easily cut to desired length
Split ring hangers for offset pipe runs. Off set determined by length of rod used in installation (sold separately). Usually installed with flange plate (also sold separately).
- Ductile iron construction
- Zinc plated finish
- 1.5 in. pipe
- Use with 3/8 in. threaded rod
- For offset installations
- Comes in other sizes
Oatey Metal Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang pipe from joists or rafters. Made of durable metal and galvanized steel, these hanger straps are corrosion resistant and feature alternating 1/4 in. and 1/2 in. nail holes for easy installation. Use as a pipe hanger, conduit and duct hanger, tubing strap, utility strap and more. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Metal hanger strap
- For supporting pipe in vertical or horizontal applications
- Made of 28-gauge galvanized steel
- For use with PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 100 ft. length
- Strap features alternating 1/4 in. and 1/2 in. diameter nail holes
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Pipe straps, pipe clamps and hangers (series 700)
- Malleable iron
- Copper plated
- Hanger
- Split ring
- Tube size 3/4 in. rod size 7/8 in.
Oatey Stand-Off Full Pipe Clamps are designed to secure copper, PEX or CPVC tubing to a mounting surface. Made of durable polypropylene, each clamp features a pre-loaded nail for fast and easy installation. The full clamp design completely encompasses the entire pipe while isolating it from the stud and reducing noise. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3/4 in. full pipe clamp with nail
- For use with copper, CPVC and PEX piping
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Made of high-impact polypropylene
- Fits 3/4 in. pipes
- Can be used on hydronic systems
- 0-160°F temperature range
Oatey Half Clamp Pipe Clamps with Nails are designed for securing copper, PEX and CPVC piping to mounting surfaces. Made of corrosion resistant polypropylene, these pipe support clamps feature a pre-loaded, rust resistant nail for easy installation and a ribbed design for noise reduction. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. half pipe clamp with nail
- Ideal for securing tubes to mounting surfaces
- For use with copper, PEX and CPVC piping
- Pre-loaded, rust resistant nail provides fast and easy installation
- Ribbed design insulates against water line noise
- Fits 1/2 in. pipes
- Made of corrosion resistant polypropylene
- Can be used on hydronic systems
Superstrut 3/8 in. Side Beam Connector. Made from Malleable Iron, with black finish. Designing to be used with 3/8 in. threaded rod.
- 3/8 in.
- Malleable iron
- Side beam connector
- Black
- Electrical hangers
- Super strut
The clips are for top mount stainless steel sinks. They fit Premier drop in sinks and sinks using U channel brackets. Youll find the clips with high-quality, durability. Also they are easy installation by hand.
- For above counter sink installations
- with long screws and clips
- For top mount installation of U-channel models
- For counter tops up to 1-1/2 in think
- Good quality and durability
- Easy installation
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 20-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
Sioux Chiefs 555 TwinTalon CTS tube fasteners shall be used where necessary to secure CTS tube in piping system. Fastener shall be 100% corrosion proof and U.V. resistant. Fastener shall be impact resistant to 0 degree F, and be able to withstand continuous temperatures up to 160 degree F.
- Fastener shall include a pre-loaded rust-resistant, continuous ring shank nail and designed to avoid tube damage if nail is overdriven
- Fastener shall be compatible with copper, PEX or CPVC tube
- Snap onto or CTS tube
- Be sure to follow spacing requirements of national and local plumbing codes
- Fastener body: UV-resistant, high density black polyethylene; 100% corrosion proof
- Nail: #7 x 2 in. zinc-plated, continuous ring shank
Dura Coat Steel Uprights With Welded Feet. Cast Iron Adjustable Headers, Steel Sleeves, Alignment Truss And Mounting Fastener. Made in: United States Dimensions: 1 X 1 X 1Brand: Zurn Item Weight: 45 includes.
- Concealed arm bathroom carrier
- Fits Kohler
- Uprights with welded feet
- Dura coat steel
- Alignment truss and mounting fastener
- Iron adjustable headers
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- Style is attracting
- Friendly use
- Easy installation
- High quality
- Wide selection
- Great value
This item is designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. This is also available in a 2 bolt design.
- Tube size 1 in.
- Rod size 3/8 in.
- Copper plated
- Malleable iron
- Designed for the support of non-insulated copper tubing lines
- Used with the MT-742-R ceiling plate
Oatey Copper and Steel Pipe Hooks are designed to support copper, PVC, CPVC, PEX, galvanized and black iron piping. Available in a variety of sizes, these hooks are self-nailing for easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Steel wire pipe hook
- Supports pipe from rafters or joists
- Fits 3/4 in. pipes
- For use with copper, PVC, CPVC and PEX piping
- 6 in. length
- Self-nailing feature allows for easy installation
- Made of 10-gauge steel
- For warranty product details, refer to the Oatey Limited Warranty document