Searched for "40142513"
1-1/2"P-Trap with Threaded Adapter. PP Material White Color. Exclusive Brand products from Barnett and The Home Depot.
- P-trap
- With threaded adapter
- PP
- White color
- cUPC approval
- Size: 1-1/2 in.
The NIBCO 1-1/2 in. ABS DWV Trap SPG x SJ Street Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.
- 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
- ABS plastic material
- For above-ground DWV
- ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
- Do not use primer with ABS
- NSF/ANSI Standard 14
- UL Listed 94V-0
- "11/2 I.D. and 1.625 O.D."
P-Trap without Threaded Adapter.PP White.Have cUPC approval.Slip joint connection.
- P-trap
- PP
- White color
- Without adapter
- cUPC approval
- Slip joint
P-Trap without Threaded Adapter. PP White. cUPC approval.
- P-trap
- 1 1/2 in.
- PP material
- White color
- cUPC approval
- With adapter
Help prevent sewer gas from escaping by installing the NIBCO 1-1/2 in. ABS DWV Hub x Hub P-Trap under the discharge of a plumbing fixture or drain. The p-trap features hub x hub connections. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.
- ABS requires no primer
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with non-pressurized sanitary systems
- Maximum working pressure of 5 psi
- Hub x hub solvent-welded connections
- NSF/ANSI standard 14
- UL Listed 94V-0
The NIBCO 2 in. PVC DWV Hub x Hub P-Trap can be used under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping. The trap is designed for non-pressurized sanitary systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires a primer before cementing
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For non-pressurized sanitary systems
- Hub x hub solvent-welded connections
- Maximum working pressure of 5 psi
- Includes union
P-Trap with Threaded Adapter. PP Black. cUPC approval.
- P-trap
- PP
- Black
- Threaded adapter
- Slip joint
- cUPC approval
Keep the kitchen sink working smoothly with the Form N Fit 1-1/2 in. Flexible P-Trap. It provides easy attachment to pipes from 1-1/4 in. to 1-1/2 in. The adaptable accordion-style design bends, compresses, expands and extends up to 6 in. Durable polypropylene construction provides long-lasting use. Includes slip joint nut and washers. Oatey products have earned the trust of plumbing professionals for over 100 years.
- P trap used to keep sewer gases from coming up sink drain
- Included reducing washer transitions from 1-1/4 to 1-1/2 in
- Durable, long lasting PVC and polypropylene construction
- Compatible with plastic pipes (sold separately)
- Sized to fit 1-1/4 in. or 1-1/2 in. plumbing systems
- Accordion-like design accommodates lengths from 3-1/2 in. to 6 in.
- Bends, compresses and expands for alignment and holds shape for easy adjustment during installation
- Slip joint connection
- Includes required hardware for an easy installation
P-Trap with Threaded Adapter. PP Black. cUPC approval.
- pp material
- With adapter
- 1 1/2 in.
- cUPC approval
- Black color
- P-trap
The NIBCO 1-1/2 in. PVC DWV P-Trap with union joint is used in residential and commercial drain, waste and vent systems. The PVC DWV P-Trap features a union joint and hub x hub connection. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment.
- PVC requires a primer before cementing
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with non-pressurized sanitary systems
- Maximum working pressure of 5 psi
- Hub x hub solvent-welded connections
- Includes union joint
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- Fine surface
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The NIBCO 1-1/2 in. ABS DWV Hub x Slip P-Trap allows for disassembly without cutting into the system. The P-trap has a maximum working pressure of 5 psi. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.
- ABS requires no primer
- Use under the discharge of a plumbing fixture or drain to prevent sewer gas from escaping
- Allows for disassembly without cutting into the system
- Hub x slip solvent-welded connections
- Maximum working pressure of 5 psi
- Includes union
PE Material. Flexible P-Trap. The size is 1-1/2 in. or 1-1/4 in.In white color. Flexible tube with slip joint.
- P-trap
- Flexible
- PE material
- Size is 1-1/2 in. or 1-1/4 in.
- Prevent P-trap alignment problems
- Flexes to fit under sink
The NIBCO PVC DWV P-Trap is used in residential and commercial drain, waste and vent systems. The PVC DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with non-pressurized sanitary systems
- Hub x hub solvent-welded connections
- Maximum working pressure of 5 psi
- NSF/ANSI standard 14
The Fernco 1-1/2 in. x 1-1/4 in. PVC Drain Trap is made of flexible PVC that can adjust to pipe misalignment. The leak-resistant pipe also resists damage from freezing for long-lasting use. Connection type is mechanical.
- Install using a torque wrench for a water tight seal
- Maximum operating temperature of 120 degree F
- 4.3 psi maximum test pressure
- Flexible PVC coupling with 300 series stainless steel clamps
- Designed for 1-1/4 in. sink drain and can be cut to fit 1-1/2 in. sink drain
- Fast and easy installation
Polypropylene for Corrosion Resistance, White. Zinc Faceplate with Trip Lever. Plastic Linkage and Plunger. Zinc Drain Spud. cUPC approval.
- PP
- Zinc faceplate with trip lever
- Zinc drain spud
- Plastic linkage and plunger
- cUPC approval
- Light-duty
KEENEY 301LLSN P-trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. It has a 1.25 in. inlet and outlet without a clean out and comes in a decorative polished chrome finish. The durable 17-Gauge brass construction offers long-lasting use. An included wall flange with a matching finish completes the look. This product includes all necessary nuts and washers for installation. You can install with confidence knowing KEENEY stands by its products with a Limited Warranty.
- Brass P-trap featuring 15 in. wall tube
- Inlet and outlet: 1-1/4 in.
- Chrome plated finish
- Includes flange, nuts and TPR washers
- Durable 17-Gauge brass tubing
- Easy to install
This product is a great cost saving solution. The price is affordable. It's easy to handle and install with little tools required. The product is wide selection of product choices.
- Fine surface
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
J Bend type pipe. Slip Joint and Direct Connection. PP White color. cUPC approval.
- J bend
- Slip and direct connect
- PP
- White
- cUPC
- Slip joint
The NIBCO 4 in. PVC DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. The NIBCO PVC DWV P-Trap is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- 4 in. Inside Diameter and 4.125 in. Outside Diameter
- Used under discharge of a plumbing fixture or drain to prevent sewer gas from escaping
- PVC DWV is easy to install and is joined by solvent cementing or threading
- PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
- Maximum service temperature 140F
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
- UL Listed 94V-0
- NSF U.P. Certified
The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.
- Do not use primer with ABS
- Hub x hub connections
- Solvent-welded connections
- NSF/ANSI standard 14
- UL Listed 94V-0
- Maximum working pressure of 5 psi
PVC P-Trap with adapter. Used in residential and commercial drain, waste and vent systems. Size in 1-1/2 inch. Have cUPC approval.
- P-trap
- With adapter
- 1-1/2 inch
- PVC material
- cUPC approval
Moen® 50/50 Lavatory Pop-Up Drain. Chrome Finish. 1.25 X 8.5". Cast Brass/Plastic. Mfg #96497
- Chrome Finish
- 1.25 X 8.5"
- Cast Brass/Plastic
- 96497
The NIBCO PVC DWV P-Trap with cleanout and plug is used in residential and commercial drain, waste and vent systems. This P-Trap features a hub x hub x cleanout with plug connection to provide a means for clearing potential clogs. The p-trap provides a water seal so that wastewater will automatically be trapped in the arc of the fitting, thereby preventing unwanted gases from entering the house.
- 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
- PVC requires a primer before cementing
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with a non-pressurized sanitary system
- Hub x hub x cleanout solvent-welded connections
- Maximum working pressure of 5 psi
- NSF/ANSI Standard 14