The E7055-NS 1/2 HP All Cast Iron Sewage Pump provides superior performance and exceptional value. It features a high efficiency PSC (permanent split capacitor) motor which uses less amps. It also offers upper and lower sealed ball bearings which increase efficiency and allows for extremely quiet operation. The cast iron, vortex impeller can move 2 solids. The E7055-NS is water cooled, thermally protected and is rated for continuous duty. The cast iron construction is industrial grade leading to greater durability and better performance so, it can handle whatever you flush at it. These premium upgrades result in a powerful motor that offers the total package - superior efficiency, durability, longevity and performance.

• 5,340 GPH (89 GPM) at a 10 ft. lift
• 1/2 HP 7.0 Amp Energy efficient permanent split capacitor (PSC) motor
• Heavy duty all Cast Iron construction
• E7055-NS is pump only, no switch included; See below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• Cast iron vortex impeller can pass 1/2 in. solids
• 2 in. Discharge for maximum output
• 10 ft. Grounded power cord
• Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
• 3 Year limited warranty

The Pro Series E7105-NS 1 HP Cast Iron / Stainless Steel Sewage Pump provides superior performance and exceptional value. It features a high efficiency PSC (permanent split capacitor) motor which uses less amps. It offers upper and lower sealed ball bearings which increase efficiency and allows for extremely quiet operation. The cast iron vortex impeller can move 2 in. solids. The E7105-NS submersible sewage pump is water cooled, thermally protected and is rated for continuous duty. The stainless steel / cast iron construction is industrial grade leading to greater durability and better performance so, it can handle whatever you flush at it. These premium upgrades result in a powerful sewage pump that offers the total package of superior efficiency, durability, longevity and performance.

• 6000 GPH (100 GPM) at a 10 ft. lift
• 1 HP, 10.5 Amp, Energy efficient permanent split capacitor (PSC) motor
• Heavy duty Cast Iron / Stainless Steel construction
• E7105-NS is pump only, no switch included; See below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• Cast iron vortex impeller can pass 2 in. solids
• 2 in. Discharge for maximum output
• 10 ft. Grounded power cord
• Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
• 3 Year limited warranty

0.4 HP Packaged Simplex Sewage System. for below drain applications. Oil filled motor for maximum heat dissipation. 19 ft. maximum head. 95 GPM. 2 NPT discharge. Handles up to 2 in. solids. 10 ft. power cord. 30 Gal. capacity.

• Complete package for versatile applications for residential septic tank sewage
• Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
• Recessed vortex impeller for free flow of solids up to 2 in. Dia
• 18 in. x 30 in. structural foam construction has 30 Gal. capacity
• Sealed 18 in. solid structural foam cover with 2 in. discharge flange, vent flance suitable for 2 in. or 3 in. vent, or split steel with 2 in. or 3 in. vent

ZOELLER M267, 1/2 HP SUBMERSIBLE SEWAGE, EFFLUENT, DEWATERING PUMP. AUTOMATIC SWITCH, 115V, W/ 10FT CORD

Capable of handling 2 in. solids - ideal for basement installation, pumping below-grade toilets, laundry facilities and general dewatering. Durable corrosion-resistant thermoplastic construction maximizes pump life. Energy-efficient motor with overload protection provides safe operation. Maximum pumping capacity to 5250 GPH. Includes 8 ft. power cord, 2 in. NPT discharge. Easy installation, requires minimum 18 in. Dia sewage basin.

• 4/10 HP automatic submersible sewage pump capable of handling 2 in. solids
• Durable corrosion-resistant thermoplastic construction maximizes pump life
• Energy-efficient motor with overload protection provides safe operation
• Maximum pumping capacity to 5250 GPH
• Includes 8 ft. power cord
• 2 in. NPT discharge
• Easy installaction, required minimum 18" diameter sewage basin

The Pro Series E7040-NS 4/10 HP Cast Iron / Stainless Steel Sewage Pump provides superior performance and exceptional value. It features a high efficiency PSC (permanent split capacitor) motor which uses less amps. It offers upper and lower sealed ball bearings which increase efficiency and allows for extremely quiet operation. The cast iron vortex impeller can move 2 in solids. The E7040-NS sewage pump is water cooled, thermally protected and is rated for continuous duty. The stainless steel / cast iron construction is industrial grade leading to greater durability and better performance so, it can handle whatever you flush at it. These premium upgrades result in a powerful motor that offers the total package of superior efficiency, durability, longevity and performance. Pro Series Sewage Pumps are #1 at Pumping #2.

• 4,440 GPH at a 10 ft. lift
• 4/10 HP, 6.3 Amp energy efficient permanent split capacitor (PSC) motor saves on electric bills
• Heavy duty Cast Iron / Stainless Steel construction
• E7040-NS is pump only, no switch included; See below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• Cast iron vortex impeller can pass 2 in. solids
• 2 in. Discharge for maximum output
• 10 ft. Grounded power cord
• Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
• 3 Year limited warranty
• 3 year limited warranty

Class 30 cast iron construction. Handles up to 2 in. solids. Oil-filled motor, 115-Volt, 9 Amp max load. Thermoplastic, vortex-type impeller. 2 in. discharge. Carbon/ceramic mechanical seal. 20 ft. power cord. 1/2 HP.

• 2-vane impeller design provides maximum pump efficiency
• Original performance can be restored if wear occurs by replacing volute seal
• Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
• High-torque, permanent split capacitor motor; no starting switches or relays to wear out
• Inlet port - 1.25 in.; outlet port - 1.25 in.; NPT threads

This 1/2 HP RIDGID All Cast Iron Sewage Pump is well suited for the harsh conditions. The RWCS50T is rugged and can pass solids up to 2 in. This pump is assembled in the USA for performance that lasts for years. It is easy to install and will deliver dependable performance. Warrantied for 3 years. This pump is able to pump up to 10,000 GPH.

• Pump is assembled to deliver dependable performance that lasts for years
• Sewage pump can pump out solids that are up to 2 in. Dia
• Quality and reliability, warrantied
• Years of worry-free operation that comes from an all cast iron pump, this pump delivers extreme durability even in a corrosive environment

The K2 PRO 3/4 HP Submersible Sewage Pump is designed to pump sewage, effluent, wastewater, or flood water that contains solids up to 2 in. in Dia. The pump is designed to fit into an 18 in. Dia. or larger pit. Engineered with the materials and performance the PRO prefers, the pump is constructed of heavy-duty cast iron and comes with a piggyback tethered float switch for reliable, maintenance-free operation and easy replacement. The pump has a maximum pumping capacity up to 14000 gal. per hour at 0 ft. of lift and 9600 gal. per hour at 10 ft. of lift.

• Non-clog vortex impeller handles up to 2 in. solids and helps prevent clogging
• Includes innovative 2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
• Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
• Double lip seal extends the life of the pump
• Piggyback tethered float switch independently tested to over 1,000,000 cycles
• 5 year warranty

The JACKEL JPACK30S-550T-HD is designed for pumping below grade toilets, washing machines and sinks to a sewer or on-site wastewater system. It comes pre-plumbed with no internal plumbing needed and ready for installation. The system features a heavy-duty 30 Gal. injection-molded structural foam polyethylene basin and cover for exceptional, heavy-duty durability. It includes a tough and solid 1/2HP cast-iron sewage pump with a strong, tethered mechanical float switch, a pump performance valve and a water-tight molded 4 in. inlet hub.

• Features an 18 in. x 30 in., 30 Gal. heavy-duty sewage basin with a water-tight snap-in molded inlet hub
• Ultra-strong cover comes with 2 in. threaded discharge and vent flanges, a molded cord grommet, a molded reusable cover seal and 8- stainless bolts and washers to secure the cover to the basin
• Automatic, all cast-iron sewage pump passes 2 in. solids and features 10 ft. power and piggy-back float switch cords
• System pumps up to 9,000 GPH
• Ultra-quiet, heavy-duty ABS compression fit check valve passes a full 2 in. solid
• Molded inlet hub comes with a stainless steel clamp for securing the inlet pipe

Find the perfect pump for your basement with the Everbilt 1/2HP Pre-Plumbed Sewage Basin System. Perfect for pumping below grade toilets, washing machines and sinks to a sewer or on-site wastewater system. Arrives pre-plumbed with no internal plumbing needed and ready for installation. The system features an injection-molded structural foam polyethylene basin and cover for exceptional, heavy-duty durability. Includes a tough and solid 1/2HP cast-iron sewage pump with a strong, tethered mechanical float switch, a pump performance valve and a water-tight molded 4 in. inlet hub.

• Features an 18 in. x 30 in., 30 Gal., heavy duty sewage basin with a water-tight snap-in molded inlet hub
• Ultra-strong cover comes with 2 in. threaded discharge and vent flanges, a molded cord grommet, a molded reusable cover seal and 8-stainless bolts and washers to secure the cover to the basin
• Automatic, all cast-iron sewage pump passes 2 in. solids and features 10 ft. power and piggy-back float switch cords
• System pumps up to 6,480 GPH
• Ultra-quiet, heavy duty ABS compression fit check valve passes a full 2 in. solid
• Molded inlet hub comes with a stainless steel clamp for securing the inlet pipe

The JACKEL JP550T-HD 1/2HP Sewage Pump is designed for pumping sewage, effluent, wastewater or drainage water with up to 2 in. solids. It has a 2 in. NPT female discharge. The pump is constructed of heavy-duty cast iron. It comes with a 10 ft. power cord and piggyback mechanical float switch for automatic or manual operation. The JP550T-HD features a high efficiency permanent split capacitor motor with automatic reset thermal overload protection and is rated for continuous duty. The JP550T-HD has a graphite and ceramic mechanically sealed motor to extend pump life.

• Every pump is 100% factory tested
• Factory certified performance curve included with every pump
• 3-year warranty
• Rated for continuous duty
• Non-clogging vortex impeller passes 2 in. solids
• Piggy-back tethered float for automatic or manual operation
• Rugged cast iron construction maximizes pump life

The K2 1/2 HP Submersible Sewage Pump is designed to pump sewage, effluent, wastewater, or flood water that contains solids up to 2 in. in diameter. The pump is designed to fit into an 18 in. diameter or larger basin. It is constructed of heavy-duty cast iron and comes with a piggyback vertical float switch for reliable maintenance-free operation and easy replacement. The pump has a maximum pumping capacity up to 6500 gal. per hour at 0 ft. of lift and 4200 gal. per hour at 10 ft. of lift.

• Vortex impeller handles up to 2 in. solids and helps prevent clogging
• Includes innovative 2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
• Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
• Piggyback vertical float switch independently tested to over 1,000,000 cycles
• 10 ft. power cord
• 5 year warranty

The Everbilt sewage basin system gives you the flexibility of adding a free-standing toilet to almost any finished surface in your home, warehouse or factory. The automatic vertical float switch activates the 1/2 HP sewage pump that is contained in the sealed basin. The 1/2 HP pump removes 6,000 GPH at 10 ft. of lift. It is constructed of rugged cast-iron for maximum pump life. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is built with ball bearings to provide quiet operation. The graphite and ceramic mechanical seals provide extended motor life. The unit has a 2 in. NPT discharge with a 10 ft. power cord.

• Pumps 6,000 GPH at 10 ft. of lift, emptying a sewage pit quickly
• Designed to remove waste water from toilet, non-sewage basin shower, this unit is ideal for basements, room additions, factories and warehouses
• Installation is easy onto almost any surface
• Unit is supplied with 2 in. discharge and check valve assembly
• 1 year limited warranty