Searched for "40171700"
The 3/4 in. SharkBite Push-Fit x MNPT Adapter allows you to make a connection to 3/4 in. pipe using a push-fit connection and gives you a 3/4 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spAces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The NIBCO 1-1/2 in. PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- For above-ground DWV
- PVC DWV is easy to install and is joined by solvent cementing or threading
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
- UL Listed 94V-0
- NSF U.P. certified
The 3/4 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 3/4 in. pipe using a push-fit connection and then gives you a 3/4 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The NIBCO PVC DWV trap adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV trap adapter features a hub x slip joint connection and provides a means for adapting a solvent weld connection to a slip joint connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC needs primer before cementing
- Used in above-ground DWV
- Adapts PVC fitting hub to tubular trap at floor or wall using solvent
- PVC DWV is easy to install and is joined by solvent cementing or threading
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- UL Listed 94V-0
- NSF U.P. certified
Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 18". Mfg #UR3088FX18
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
The 1/2 in. Tectite by Apollo push-to-connect x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a Push-To-Connect connection and provides a 1/2 in. Female NPT Adapter on the opposite end. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 64
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The NIBCO PVC DWV female adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV female adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- For above-ground DWV
- Adapts PVC pipe to standard male pipe threads using solvent
- PVC DWV is easy to install and is joined by solvent cementing or threading
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- UL Listed 94V-0
- NSF U.P. certified
Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 15". Mfg #UR3088FX15
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
SharkBite Push-to-connect PVC transition fittings are the fastest way to transition from PVC or IPS (iron pipe size) pipe to PEX, copper, CPVC, PE-RT, or HDPE pipe. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe, and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. The fitting has a white-collar for the PVC pipe and a tan collar for all CTS (copper tube size: PEX, copper, CPVC, PE-RT, HDPE) pipes. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Compatible with schedule 40, 80, 120 PVC pipe
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 degrees Fahrenheit and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- PVC end of fitting (white-collar end) can be removed with PVC disconnect clip (UIP710, UIP712, UIP714)
- Code approved, IAPMO listed, for details see Specifications
- 25-Year warranty when used with PVC to PEX, copper, CPVC & PE-RT pipe
- 5-Year Warranty when used with SDR-9 HDPE pipe
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
The 1/2 in. SharkBite Push-Fit x MNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and gives you a 1/2 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spAces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 degree F and 200 psi
- Meets all UPC, IPC and cUPC requirements
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The 3/4 in. Tectite by Apollo push-to-connect x MNPT Adapter allows you to make a connection to 3/4 in. pipe using a Push-To-Connect connection and provides a 3/4 in. Male NPT adapter on the opposite end. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 64
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The 3/4 in. Tectite by Apollo push-to-connect x FNPT Adapter allows you to make a connection to 3/4 in. pipe using a Push-To-Connect connection and provides a 3/4 in. Female NPT Adapter on the opposite end. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 64
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The NIBCO 1/2 in. PVC DWV trap adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV trap adapter features a hub x slip joint connection and provides a means for adapting a solvent weld connection to a slip joint connection. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC needs primer before cementing
- Not for use with compressed air or other gases
- Adapts PVC fitting hub to tubular trap at floor or wall using solvent
- PVC DWV is easy to install and is joined by solvent cementing or threading
- UL Listed 94V-0
- NSF/ANSI standard 14
The 1/2 in. x 3/4 in. SharkBite Push-Fit x MNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and gives you a 3/4 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 1/2 in. Tectite by Apollo push-to-connect x 3/4 in. FNPT Reducing Adapter allows you to make a connection to 1/2 in. pipe using a Push-To-Connect connection and provides a 1/2 in. Female NPT adapter on the opposite end. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 66
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The NIBCO Press System copper male adapter features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds, with no flame, solder or flux. The male adapter has a press connection and male NPT thread. The fitting provides a method for adapting a press connection to a threaded connection. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
- ASTM B75 alloy C12200 copper
- IFGC (international fuel gas code)
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA30 flammable and combustible liquids code
- NFPA30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certified to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
NIBCO's 2 in. PVC DWV Soil Pipe Adapter Hub x No Hub for non-pressurized waste drainage, is an adapter between PVC and cast iron. It also allows circulation of air within the piping system. PVC DWV is easy to install and is joined by solvent cementing or threading.
- 2 in. Inside Diameter and 2.125 in. Outside Diameter
- PVC requires the use of a primer before cementing
- DWV for use in non-pressurized sanitary drainage system
- Adapts PVC to cast iron using clamp or rubber sleeve
- For above-ground use
- NSF/ANSI Standard 14
- UL Listed 94V-0
- "2 I.D. and 2.125 O.D."
The NIBCO 2 in. PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires a primer before cementing
- For above-ground DWV
- Adapts PVC pipe to standard female pipe threads using solvent
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The NIBCO 3 in. x 4 in. PVC DWV Hub x Sewer and Drain Soil Pipe Adapter adapts PVC pipe to cast iron soil pipe using cement and clamp or rubber sleeve. This adapter should be used in a non-pressurized sanitary waste system. PVC DWV is easy to install and is joined by solvent cementing or threading.
- 3 X 4 in. Inside Diameter and 3 1/8 x 4 1/8 in. Outside Diameter
- PVC material - requires priming before cementing
- For DWV, above-ground
- Adapts PVC to cast iron soil pipe using solvent
- Use with rubber sleeve or clamp
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140F
Nylon push connect male adaptor, 3/8 in. O.D. Push Connect x 3/8 in. MIP zero-leak connections. Used to connect to copper, PEX and other good quality plastic tubing with no tools or inserts required. Can be used with hot and cold water, air, vacuum and non-volatile liquids and is rated for 150 psi at 70 degree F and 60 psi at 140 degree F. No lead certified.
- Durable nylon construction
- Can be used with hot and cold water, air, vacuum, and non-volatile liquids
- Used to connect to copper, PEX and other good quality plastic tubing
- No tools required
- No tube inserts required
- Zero-leak connectors