Searched for "40172600"
Use the NIBCO 3 in. PVC DWV Coupling to connect PVC piping lengths together in drain, waste and vent piping systems. the PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths together
- Hub x hub connections
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
Use the NIBCO 4 in. PVC DWV Coupling to connect PVC piping lengths in drain, waste and vent piping systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The 3/4 in. SharkBite Push-to-Connect Straight coupling is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
BrassCraft push fit union connector 1/4 in. OD is used to connect copper, PEX and other good quality plastic tubing. It is easy to use, so suitable for both do it yourselfers and pros, alike. No tools or tube inserts are required. These can be used with both hot and cold water, air, vacuum and non-volatile liquids. Also, they have zero-leak connections.
- Used to connect to copper, PEX and other good quality plastic tubing
- Requires no tube inserts
- Requires no tools
- Can be used with hot and cold water, air, vacuum and non-volatile liquids
- Zero-leak connections
- Rated for 150 psi at 70F and 60 psi at 140F
The 3/4 in. Tectite by Apollo Push-To-Connect coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 64
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Use the NIBCO 1-1/2 in. PVC DWV Coupling to connect PVC piping lengths in drain, waste and vent piping systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- ASTM D2665
- NSF/ANSI standard 14
Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 24". Mfg #UR3088FX24
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
The NIBCO 4 in. x 3 in. PVC DWV Hub x Hub Reducing Coupling is designed for use with DWV piping systems. The coupling can be used to adapt PVC pipe to standard female pipe threads. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires a primer (not included) before cementing
- Used with DWV piping
- Adapts PVC pipe to standard female pipe threads
- Hub x hub connection
- Solvent welded connections
- ASTM D2665
- NSF/ANSI standard 14
- UL Listed 94V-0
- NSF U.P. certified
Use the NIBCO 6 in. PVC DWV Hub x Hub coupling to connect PVC piping lengths. It is made of corrosion-resistant PVC and has solvent-welded connections. PolyVinyl Chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.
- Made of corrosion-resistant PVC
- Requires a primer before cementing
- Use to connect PVC piping lengths together
- Solvent-welded connections
- Maximum pressure rating of 5 psi
- NSF/ANSI standard 14
- UL Listed 94V-0
The 1/2 in. Tectite by Apollo Push-To-Connect coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 63
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 inches of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 degrees Fahrenheit and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year warranty when used with CPVC & copper pipe
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip (included) allows user to release the fitting from the pipe for convenient installation flexibility
- Rated to 200 degree F and 200 psi
- 3/4 in. pipe insertion depth = 1-1/8 in.
Use the Viega ProPress 2-in. Coupling with No Stop to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling has no internal stop, allowing installers to slip it into place in tight locations.Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The 1 in. x 3/4 in. SharkBite Push-Fit Reducer coupling allows you to make a connection from 1 in. Pipe and reduce down to a 3/4 in. Pipe. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spAces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 degree F and 200 psi
- Meets all UPC, IPC and cUPC requirements
The NIBCO PVC DWV coupling is used in residential and commercial drain, waste and vent systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Used with drain, waste and vent piping to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- 5 year warranty
- Repair any combination of 1-1/2" or 1-1/4" tubular brass
- Stainless steel clamps
DWV is used for non-pressurized sanitary system Drain, Waste, and Vent. There are two types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.
- Repair coupling is furnished without center stop and splices stationary lengths of PVC-DWV piping
- Solvent welded connections
- PVC requires a primer before cementing
- Solvent-welded connections
- ASTM D2665 and D3311
- UL Listed 94V-0
The NIBCO PVC DWV coupling is used in residential and commercial drain, waste and vent systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Connects lengths of pipe
- Compatible with PVC pipe
- Designed for use with non-pressurized sanitary system DWV
- Solvent weld hub x hub connection
- Maximum working pressure of 5 psi
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The NIBCO PVC DWV coupling is used in residential and commercial drain, waste and vent systems. The PVC DWV coupling features a hub x hub connection and connects PVC DWV piping lengths with solvent weld connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- Used with drain, waste and vent piping systems to connect PVC piping lengths
- Hub x hub connections
- Solvent-welded connections
- ASTM D2665
- NSF/ANSI standard 14
Use the Viega ProPress 2-in. Coupling to make secure extensions and repairs of ASTM B88 and B75 copper tubing. This coupling features an internal stop indentation to stop pipe halfway through the fitting when inserted. Thanks to its easy press connections, installing the coupling is quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress couplings install in just three easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth, and use a press tool to connect the Viega ProPress coupling for a secure connection. smart connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
- Designed for resistance to heavy earth loads and shear forces, while providing improved pipe alignment
- Connects CI, plastic, copper, steel or lead to CI, plastic, copper, steel or lead
SharkBite Push-to-connect polybutylene fittings are the fastest way to transition from polybutylene pipe to PEX, copper, CPVC, PE-RT, or HDPE pipe. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe, and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. The fitting has a gray collar for the polybutylene pipe and a tan collar for all CTS (copper tube size: PEX, copper, CPVC, PE-RT, HDPE) pipes. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-Connect fittings are ideal for installation in tight spaces
- Rated to 200 ° F and 400 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-year warranty when used with polybutylene to PEX, copper, CPVC & PE-RT pipe
- 5-year warranty when used with polybutylene to SDR-9 HDPE pipe
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 in. of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 ° F and 400 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-year warranty when used with CPVC & copper pipe
Securely connect copper tubes with the 2 in. x 1 1/2 in. ProPress copper reducer. Designed for use with ASTM B88 and B75 copper tubing, this fitting allows for a smooth transition between different tube sizes. Press connections make installing this reducer quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress copper reducers install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega ProPress reducer for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress reducers are the top choice of professionals around the globe.
- Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
- Compatible systems include potable water, hydronics and more
- Installs in 7-seconds or less with a press tool, no flame, solder or flux required
- Viega smart connect technology helps installers identify unpressed fittings
- Press technology eliminates the need for burn permits or fire watch
- Wet or dry connections allow quick repairs on existing systems
- Durable internal EPDM rubber seals for watertight connections
- Rated for 0°F to 250°F, up to 300 psi for water applications
- Zero lead solution certified under NSF-61-387
- Reliability guaranteed by 50-year limited warranty
SharkBite 3/4 in. Push-to-Connect Brass Coupling Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.
- Push-to-Connect fittings are ideal for installation in tight spaces
- Rated to 200 degree F and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
- 5-Year Warranty when used with SDR-9 HDPE Pipe
Proflex allows you to make transition pipe connections that are resistant to shear forces above ground, while creating a rigid, long-lasting pipe joint. From 1 1/2" to 8" - Proflex connects cast iron, plastic, steel, copper and tubular, drain, waste and vent systems.Fernco couplings have been proudly manufactured in the USA since 1964 and are made of the highest quality elastomeric polyvinyl chloride and corrosion-resistant, rust-proof clamps. With a reputation for quality, innovation, and reliable performance, you can trust Fernco as the global leader in flexible plumbing couplings.
- UNMATCHED QUALITY & PERFORMANCE: Built to last the life of the plumbing system, Fernco couplings are made from elastomeric polyvinyl chloride for a strong, leak-proof fitting that's resistant to chemicals and sewer gases.
- NO-MESS INSTALLATION: Fernco couplings are easy to install without the hassle of messy primers, glues and their unwanted odors.
- TRUSTED & PREFFERED: Proudly manufactured in the United States.
- SPECS & CODES: Conforms to ASTM C 1460, C 564 and CSA B602. 300 stainless steel clamps are corrosion-resistant, rustproof and make installing quick and easy with just a screwdriver, nut driver or torque wrench.
- RECOMMENDED USE: Rated for Above Ground Use
Securely connect copper tubes with the 1 in. x 1/2 in. ProPress copper reducer. Designed for use with ASTM B88 and B75 copper tubing, this fitting allows for a smooth transition between different tube sizes. Press connections make installing this reducer quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress copper reducers install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega ProPress reducer for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress reducers are the top choice of professionals around the globe.
- ProPress reducers install up to 60% faster compared to soldering
- Press reducer quickly repairs connections, wet or dry
- Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
- Compatible systems include potable water, hydronics and more
- Installs in 7-seconds or less with a press tool, no flame, solder or flux required
- Viega smart connect technology helps installers identify unpressed fittings
- Press technology eliminates the need for burn permits or fire watch
- Wet or dry connections allow quick repairs on existing systems
- Durable internal EPDM rubber seals for watertight connections
- Rated for 0°F to 250°F, up to 300 psi for water applications
- Zero lead solution certified under NSF-61-374
- Reliability guaranteed by 50-year limited warranty
The NIBCO PVC DWV repair coupling is used in residential and commercial drain, waste and vent systems. The PVC DWV repair coupling features a hub x hub connection without a stop and repairs and/or connects lengths of PVC DWV piping. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Furnished without a center stop
- Use to splice together stationary lengths of PVC DWV piping
- Hub x hub connections
- Solvent-welded connections
- NSF/ANSI standard 14
The 3/4 in. x 1/2 in. Tectite by Apollo Push-To-Connect coupling is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 66
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 inches of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 degrees Fahrenheit and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year warranty when used with CPVC & copper pipe
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip (included) allows user to release the fitting from the pipe for convenient installation flexibility
- Rated to 200 degree F and 200 psi
- 1 in. pipe insertion depth = 1-5/16 in.
The NIBCO PressG copper fitting reducer features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The fitting reducer has a press connection and a fitting end. The fitting provides a method to connect two lengths of tube. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing,
- Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC international fuel gas code
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA 30 flammable and combustible liquids code
- NFPA 30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certifiefd to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
BrassCraft 3/8 in. Compression/Push x 3/8 in. Compression/Push Coupling Push Fitting is used to connect copper, PEX and other good quality plastic tubing. It is easy to use, so suitable for both DIYers and pros, alike. No tools or tube inserts are required. These can be used with both hot and cold water, air, vacuum and non-volatile liquids. Also, they have zero-leak connections.
- Used to connect to copper, PEX and other good quality plastic tubing
- Requires no tube inserts
- Requires no tools
- Can be used with hot and cold water, air, vacuum, and non-volatile liquids
- Zero-leak connections
- Rated for 150 psi at 70F and 60 psi at 140F
The Tectite by Apollo Brass Push-To-Connect EZ-Slip Repair Coupling is a patented innovation in push-to-connect technology designed to make a quick repairs to rigid Copper or CPVC Pipe. Great for emergencies and freeze repairs, the Tectite by Apollo Push-to-Connect EZ-Slip Repair Coupling is the fastest, cleanest and simplest way to repair copper and CPVC without the use of tools, solder, open flame or glue. The slip capability allows a section (up to 1 in.) of pipe to be cut out allowing for the easy installation of the fitting where rigid pipes do not allow movement. Simply thread the included demount clips on either end of the fitting until they resist further tightening. Slide the slip coupling on to the pipe covering the leak point or position the slip coupling so that it either pipe is fully inserted into the fitting. Finally, turning counter-clockwise, remove the threaded demount clips which will allow the stainless steel grip teeth to bite the pipe and provide a leak free connection. Fitting removal and reuse is just as simple using the threaded demount clips (included). After assembly, fitting may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC, and cUPC standard requirements
- Demount clip allows for fitting removal (included)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Designed for the connection and repair of 1/2 in. CTS sized pipe
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.
- Viega smart connect makes secure connection in less than 7-seconds
- Minimizes system downtime by allowing for wet connection
- Fast and easy to use
- No flame, solder, flux, or heavy equipment needed
- Helps installers easily identify unpressed connections during pressure testing
- Lead free
The Genova 3/4 in. PVC Insert Coupling features an insert x insert connection type and can be used to join polyethylene tubing (tubing not included). The coupling has a gray finish.
- Use to join polyethylene tubing (not included)
- Insert x insert connection type
- PVC construction
- Gray finish
- Rated for under ground use
- Used in irrigation water supply
The 3/8 in. x 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 3/8 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless-steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
The Tectite by Apollo 1 in. Brass Push-To-Connect PVC (Iron Pipe Size) Slip Repair Coupling is an innovation designed to make a quick repairs to Schedule 40, Schedule 80 and Schedule 120 PVC pipe. The slip capability allows a section (up to 2 in.) of pipe to be cut out allowing for the easy installation of the fitting where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. Great for emergencies and freeze repairs, the Tectite by Apollo Push-To-Connect PVC (Iron Pipe Size) Slip Repair Coupling is the fastest, cleanest and simplest way to repair PVC pipe without the use of tools, solder, open flame or glue. Unlike standard PVC repair methods, Tectite by Apollo Push-To-Connect PVC (Iron Pipe Size) Slip Repair Couplings can be installed in wet conditions Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, fitting may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any schedule 40, 80 or 120 PVC pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC, and cUPC standard requirements
- Demount clip allows for fitting removal (included)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The 3/4 in. x 1/2 in. SharkBite Push-to-Connect Reducer Coupling allows you to make a connection from 3/4 in. Pipe and reduce down to a 1/2 in. Pipe. SharkBite fittings are the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 1/2 in. Pipe Insertion Depth = 15/16 in. and 3/4 in. Pipe Insertion Depth = 1-1/8 in.
The 1/2 in. x 3/8 in. SharkBite Push-Fit Reducer coupling allows you to make a connection from 1/2 in. Pipe and reduce down to a 3/8 in. Pipe. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Designed for potable water distribution as well as hydronic heating applications
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200F and 200 psi
Fernco's stainless steel shear rings help maintain proper alignment even in the most unstable ground conditions. Designed to withstand shear forces below ground. Can be used with a variety of pipe types and sizes.
- UNRIVALED RESILIENCE IN CHALLENGING CONDITIONS: Fernco RC shielded couplings accommodate challenging pipe connections, including slight off-set in host pipes.
- BELOW-GROUND PIPE CONNECTOR EXCELLENCE: Designed to resist heavy earth loads and shear forces, Fernco RC pipe couplings stand as the optimal choice for below-ground applications.
- FLEXIBLE FIT: Specifically designed to connect 4" Clay to 4" Cast Iron, Plastic (Sch 40, SDR-35, ABS), and Steel pipes. This coupling accommodates pipe outer diameters (ODs) ranging from 5"-5.55" on one end and 4"-4.6" on the other end.
- THE PREFERRED PIPE CONNECTOR: Fernco couplings stand as the top choice for flexible pipe connections in waste, drain, and vent applications. Trusted by plumbers, contractors, and municipalities worldwide.
- UNSURPASSED DURABILITY: Provides a permanent, leak-proof solution for sewer, drain, waste, and vent piping needs, ensuring enduring performance tailored to various requirements and standards.
- SPECS & CODES: Complies with ASTM D 5926, C 1173, CSA B602 and are UPC Approved. Best for below ground use. Maximum test pressure: 4.3 PSI.
- American Craftsmanship: With over 60 years of proud manufacturing in the USA, Fernco's products reflect unparalleled quality and reliability, underpinned by decades of industry expertise.
The NIBCO PressG copper fitting reducer features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The fitting reducer has a press connection and a fitting end. The fitting provides a method to connect two lengths of tube. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
- Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC international fuel gas code
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA 30 flammable and combustible liquids code
- NFPA 30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certifiefd to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
The 1 in. Tectite by Apollo Push-to-Connect IPS (Iron Pipe Size) x CTS (Copper Tube Size) conversion coupling is the fastest, cleanest and simplest way to transition from SCH40/80/120 pipe to any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC, and PEX to iron pipe sized pipe such as SCH40/80/120 and IPS CPVC
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC, and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
- Designed for resistance to heavy earth loads and shear forces, while providing improved pipe alignment
- Connects CI, plastic, copper, steel or lead to CI, plastic, copper, steel or lead
- Designed for resistance to heavy earth loads and shear forces, while providing improved pipe alignment
- Connects CI, plastic, copper, steel or lead to CI, plastic, copper, steel or lead
