The NIBCO 3 in. PVC DWV 90 degree Hub x Hub Elbow is designed for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

The 3/4 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The NIBCO 3 in. PVC DWV 22-1/2 Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses. The only reason for selecting 1 material over another is either the cost of the material or local plumbing code restrictions.

• Changes direction of PVC piping 22-1/2 degree
• Solvent welded connections
• PVC requires a primer before cementing
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The 3/4 in. Tectite by Apollo Push-To-Connect Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The 1/2 in. Tectite by Apollo Push-To-Connect Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The NIBCO PVC DWV 90 degree vent elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information.

• Changes direction in vent piping 90 degree
• Solvent welded connections
• PVC requires a primer before cementing
• Maximum service temperature 140 degree F
• Not for use with compressed air or other gases
• NSF/ANSI standard 14
• UL Listed 94V-0
• NSF U.P. certified

The 3/4 in. x 1/2 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to 3/4 in. pipe and reduce down to a 1/2 in. pipe. SharkBite Fittings can be used with any combination of Copper, CPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

Nibco 4 PVC DWV 60 Degree Hub X Hub Elbow Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K44045I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

Securely connect tubes with the ProPress copper 45degree street elbow. Designed for use with ASTM B88 and B75 copper tubing, street elbows allow for more convenient connection options in tight situations. Press connections make installing this 5degree street elbow quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega Prepress street elbows install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega Prepress street elbow for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega Prepress street elbows are the top choice of professionals around the globe.

• Install ProPress street elbows up to 60% faster than soldering
• Press street elbow quickly repairs connections, wet or dry
• Designed for use with ¾ in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7-seconds or less with a press tool, no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0°F to 250°F, up to 300 psi for water applications
• Zero lead solution certified under NSF-61-383
• Reliability guaranteed by 50-year limited warranty

Securely connect tubes with the ProPress 45degree street elbow. Designed for use with ASTM B88 and B75 copper tubing, street elbows allow for more convenient connection options in tight situations. Press connections make installing this 45degree street elbow quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress street elbows install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega ProPress street elbow for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress street elbows are the top choice of professionals around the globe.

• Install ProPress street elbows up to 60% faster than soldering
• Press street elbow quickly repairs connections, wet or dry
• Designed for use with 3 in./4 in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7-seconds or less with a press tool, no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0°F to 250°F, up to 300 psi for water applications
• Zero lead solution certified under NSF-61-384
• Reliability guaranteed by 50-year limited warranty

Dearborn Plastic Flanged Strainer Tailpieces are available in various lengths, come with one or double flanged ends and compatible with any sink strainer. They are constructed of durable polypropylene plastic and are universal in design. Dearborn is known for providing superior quality plumbing products designed with the plumber in mind.

• 1-1/2 in. Dia by 8 in. length
• Made of durable polypropylene plastic
• Black in color, also available in white
• Meets ASTM F 409
• IAPMO Listed
• Also available in various lengths depending on drain application

Use the NIBCO 3 in. PVC DWV 90 degree Spigot x Hub Street Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing systems
• Helps air circulate in drainage piping
• Changes the direction of PVC piping 90 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

The NIBCO 6 in. PVC DWV 45-Degree Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.

• Changes direction of PVC piping 45-degree from a fitting hub to PVC pipe size
• Solvent welded connections
• PVC requires a primer before cementing
• Maximum service temperature 140F
• ASTM D2665 and D3311
• NSF/ANSI Standard 14
• UL Listed 94V-2
• NSF U.P. Certified

The NIBCO 3 in. PVC DWV 90 degree Long Turn Street Elbow features a spigot x hub connection and long radius and is used to change the direction of flow. The NIBCO PVC DWV 90 degree long turn street elbow is used in residential and commercial drain, waste and vent systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness
• PVC DWV is easy to install and is joined by solvent cementing or threading
• NSF/ANSI standard 14
• ASTM D2665 and D3311
• UL Listed 94V-0
• Maximum pressure 5 psi

The NIBCO 2 in. PVC DWV double elbow features all hub connections and is used to change the direction of flow. The NIBCO PVC DWV double elbow is used in residential and commercial drain, waste and vent systems. Helps air circulate in drainage piping. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness, PVC DWV is easy to install and is joined by solvent cementing or threading
• 5 year limited warranty
• Solvent weld connections
• Apply a primer to the PVC before cementing
• VC DWV is easy to install and is joined by solvent cementing or threading
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• "2 I.D. and 2.125 O.D."

The 1/2 in. Tectite by Apollo Push-To-Connect x 1/2 in. FNPT Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. This fitting has Tectite by Apollo push-to-connect technology on one end and FNPT threads on the opposite end. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Nibco 3" PVC DWV Hub X Hub X Hub Double Elbow. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K28555I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The NIBCO 4 in. PVC DWV 22-1/2 (1/16 Bend) Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.

• Changes direction of PVC piping 22-1/2 degree from a fitting hub to PVC pipe size
• Solvent welded connections
• PVC requires a primer before cementing
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Nibco 4" X 3" PVC DWV 90-Degree Spigot X Hub Street Closet Elbow. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K05825I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The 1/2 in. SharkBite Push-to-Connect x MNPT Adapter allows you to make a 90 connection to 1/2 in. pipe using a Push-to-Connect connection on 1 end and gives you a 1/2 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

Nibco 2" X 2" X 1-1/2" DWV PVC Hub Long Radius Combination Tee-Wye. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K15715I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

Ipex 4" PVC Sewer 22-1/2D Elbow Sdr35 - GXG. Used In Gravity Sewer Systems. Eliminates infiltration and exfiltration. Easily outperforms concrete and corrugated PE joints. Pipe conforms to ASTM D3034 and ASTM F679. Corrosion Resistant, hydrogen sulfide (H2S) and other aggressive chemicals common in sanitary sewage. Creates a 22½ degree bend in a sewer pipe run. Gasketed ends ensure a secure and water-tight connection. Smooth inner walls provide systems with a Manning coefficient of 0.009, allowing for use of smaller diameters of pipe when compared to rough walled pipe. Mfg #443080

• Used In Gravity Sewer Systems
• Eliminates infiltration and exfiltration
• Easily outperforms concrete and corrugated PE joints
• Pipe conforms to ASTM D3034 and ASTM F679

Nibco 3" PVC DWV 90-Degree Hub X Hub Vent Elbow. Maximum Service Temperature 140degree f. Not for use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K05360I

• Maximum Service Temperature 140degree f
• Not for use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14