Searched for "26101400"
For Use with 48" Frame (5-5/8") Motors. Comes Complete with Lock-On Hangers and Lock Washers For Security. 3/8" Mounting Hole Fits Carrier and Others.
The most reliable and efficient residential and commercial motors supplied by Packard.Our Packard branded OEM replacement motors cover an almost limitless range of applications. From heavey duty T-frame motors, to the smaller C-frames, we have a selection that can meet your repair requirements big or small.
- Assembled with bracket
- Shaded pole
- Sleeve bearing
- Stud mounting
- Rotation is determined by viewing the shaft end
- 120 Volts
- 0.6 Amps
- CW Rotation
- 3000 RPM
- 60 Hertz
No job can be completed properly without the right tools and accessories. With HVACR repairs, having the right accessories can help you and your technicians save money and make mney by providing flexible options when replacing expensive OEM designs. Plus, our brand means a better value, helping you meet your budget and enhance profitability.
- 5-5/8" Diameter
- 3-Leg Torsion-Flex Bracket
- Designed to effectively isolate and prevent torsional vibrations from reaching blower housing and
- Includes 3 Grommets, 1 Bolt, 1 Nut, 3 Steel Washers
The Generac 5719 maintenance kit is designed for the 410 cc engine portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Helps you extend the life and maintain the performance of your portable generator
- Includes air and oil filters
- Includes a spark plug and a spark plug wrench
- Includes an oil funnel, stabil sample and chamois
- Oil funnel
- Chamois
- Stabil sample
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The automatically controlled thermostat in the Generac Cold Weather Kit for Generac 3. 0 l, 4. 6 l, 5. 4 l and 6. 8 l Direct Drive Units activates the battery warmer when temperatures fall below an acceptable level. Helps your generator maintain an ideal battery temperature. The kit is made for use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6 l and 6. 8 l engines.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below freezing
- Thermostat activates the battery warmer when temperatures fall below an acceptable level
- For use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6. 5. 4 l and 6. 8 l engines
- Includes a battery warmer with an automatically controlled thermostat
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The spill box drain back kit allows fuel that was captured in the 5 Gal. spill box to be drained directly back into the fuel tank to avoid vapors. This kit is only used in conjunction with the 5 Gal. spill box. It is not used independently.
- Compatible with protector series diesel generators
- Includes all needed hardware
- Instructions included
- Easy to install
Mounting Hardware
- FH40/50/60 UNITS
- FW40/50/60 Series B Units
- 16 PCS
MFG Part# 78L41
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Heavy-duty Generac contractor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- 5 year limited warranty
MFG Part# P251-0078
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
After 200-hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.
- Use to perform complete maintenance on a Generac EcoGen air-cooled generator
- For use on a 6 kW, 530 cc generator
- Maintenance is recommended at every 200-hours of use or 2-years of ownership
- Kit includes an air filter, oil filter, 2 spark plugs, an oil funnel, chamois and a reminder sticker
- Oil not included
The Generac Maintenance Kit for Portable Generators makes it easy to perform routine maintenance on your portable generator to achieve top performance. The kit includes air and oil filters, a chamois and other necessary tools. This kit is designed for a 992 cc engine.
- Helps you extend the life and maintain the performance of your portable generator
- Includes air and oil filters
- Includes a spark plug
- Includes an oil funnel, stabil sample and chamois
- Oil funnel
- Chamois
- Stabil sample
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- Service entrance rated 100 Amp 120/208-Volt 3 phase automatic transfer switch
- 5 year limited warranty
The Utility Brown Out Kit provides an option for areas that regularly experience utility brown outs by increasing the threshold that the utility power must achieve before allowing drop out or pick up. This ensures the proper voltage is fed into the transfer switch coils. Main features include.
- 240-Volt relay timer, 8 position, 600-Volt, 10 Amp socket relay and associated hardware
- Allows the nominal voltage pick up percentage to be increased to 90%
- Allows the nominal drop out, pick up percentage to be increased to 95%
- Compatible with: RTSX, RTSD, RSTE, RTSN, EZ switches up to 400 Amp, single phase (not compatible with GenReady)
Mounting Plate
- Venter Motor Plate
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.
- Compatible with all Generac 22-150 kW liquid-cooled models
- NEMA/UL 3R (indoor/outdoor rated) rugged steel enclosure
- Heavy-duty Generac contactor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- 5 year limited warranty
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Use to perform a complete maintenance on Generac air cooled generator
- For use with 7 kW, 410cc generator
- Includes an air filter, oil filter, spark plug, spark plug wrench, oil funnel, chamois and reminder sticker
- Oil must be purchased separately based upon manufacturer recommendations listed below
The Generac Scheduled Maintenance Kit for Standby Generators with 1.6 l Engines helps you complete scheduled maintenance on your standby generator. Scheduled maintenance is crucial to keeping your Generac generator running smoothly. The kit included.
- Air and oil filters
- 4 spark plugs
- Reminder sticker
- Oil funnel
- Chamois
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Heavy-duty Generac contractor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- 5 year limited warranty
E-stop allows for immediate fuel shutoff and generator shutdown in the event of an emergency. It is field mounted in the generator roof line above the control area for easy access. The E-stop will shut down the Generator without damaging the unit.
- Easy installation
- Resettable push button style
- Field installed
Champion Power Equipment 100375 Synthetic Rope Aluminum Hawse Fairlead is designed for 8000 lbs. to 12,000 lbs. or less Truck/SUV win. as well as 12-Volt DC win. of the same size. Although synthetic rope is extremely strong and lightweight, it can still be damaged or even experience breakage when used with a standard roller fairlead. Precisely machined and smooth, this aluminum hawse fairlead is designed to be used exclusively with synthetic winch rope to prevent damage and maximize the life of the rope. With a standard 10 in. (254 mm) bolt pattern, this dependable fairlead has a full black anodized finish with a laser-etched logo. For use with synthetic rope only. Buy with confidence - Champion will back up your purchase with a 1-year limited warranty.
- Smooth - this hawse fairlead is precisely machined and smooth, with a full black anodized finish and a laser-etched logo
- Exclusive - designed for exclusive use with synthetic winch rope to prevent damage and maximize the life of the rope
- Bolt Pattern - a standard 10 in. (254 mm) bolt pattern
- Versatile - use this aluminum hawse fairlead with 8000 lbs. to 12,000 lbs. Champion Truck/SUV win or other 12-Volt DC win of the same size
- Reliable - Champion will back up your purchase with a 1-year limited warranty
- LIEBERT Blower Motor: 1/2 HP, 200-230 Volt, 900/1075 RPM
- Thermally Protected
- Capacitor Needed: 10MFD @440v
- Ensures efficient operation of equipment
- Easy installation
- MFG# 159267P1S
Scheduled maintenance is a necessity for all standby generators. The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac air-cooled generators. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Air and oil filters included
- 2 spark plugs included
- Reminder sticker included
- Oil funnel included
- Chamois included
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
The Generac 5720 maintenance kit is designed for the XP10000E and XG10000E portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Tune-up kit keeps your generator running at optimum performance
- Generac portable generator maintenance kit is designed for XP10000E and XG10000E generators
- Contents: air filter, oil filter, oil funnel, spark plug, fuel stabilizer, and chamois
- Oil must be purchased separately, short description