No job can be completed properly without the right tools and accessories. With HVACR repairs, having the right accessories can help you and your technicians save money and make mney by providing flexible options when replacing expensive OEM designs. Plus, our brand means a better value, helping you meet your budget and enhance profitability.

• 5-5/8" Diameter
• 3-Leg Torsion-Flex Bracket
• Designed to effectively isolate and prevent torsional vibrations from reaching blower housing and
• Includes 3 Grommets, 1 Bolt, 1 Nut, 3 Steel Washers

The most reliable and efficient residential and commercial motors supplied by Packard.Our Packard branded OEM replacement motors cover an almost limitless range of applications. From heavey duty T-frame motors, to the smaller C-frames, we have a selection that can meet your repair requirements big or small.

• Assembled with bracket
• Shaded pole
• Sleeve bearing
• Stud mounting
• Rotation is determined by viewing the shaft end
• 120 Volts
• 0.6 Amps
• CW Rotation
• 3000 RPM
• 60 Hertz

For Use with 48" Frame (5-5/8") Motors. Comes Complete with Lock-On Hangers and Lock Washers For Security. 3/8" Mounting Hole Fits Carrier and Others.

MFG Part# 8200-031BX

• Genuine OEM product
• Multiple applications (such as drain pans or anything driven by a size or dimension)
• For Gas Furnace Applications (pilots, flame sensors, etc.)

Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductors 10-Gauge wire with L14-30 male + female ends. UL Listed.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord stays flexible even in subzero temperatures
• Molded ends provide greater reliability
• Male plug connects to generator and female end connects to power inlet box/transfer switch
• UL Listed

MFG Part# 78L41

• Genuine OEM product
• Multiple applications (such as drain pans or anything driven by a size or dimension)
• For Gas Furnace Applications (pilots, flame sensors, etc.)

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.

• Air and oil filters
• 6 spark plugs
• Reminder sticker
• Pre-cleaner
• Oil funnel
• Chamois
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

E-stop allows for immediate fuel shutoff and generator shutdown in the event of an emergency. It is field mounted in the generator roof line above the control area for easy access. The E-stop will shut down the Generator without damaging the unit.

• Easy installation
• Resettable push button style
• Field installed

The Utility Brown Out Kit provides an option for areas that regularly experience utility brown outs by increasing the threshold that the utility power must achieve before allowing drop out or pick up. This ensures the proper voltage is fed into the transfer switch coils. Main features include.

• 240-Volt relay timer, 8 position, 600-Volt, 10 Amp socket relay and associated hardware
• Allows the nominal voltage pick up percentage to be increased to 90%
• Allows the nominal drop out, pick up percentage to be increased to 95%
• Compatible with: RTSX, RTSD, RSTE, RTSN, EZ switches up to 400 Amp, single phase (not compatible with GenReady)

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 50 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

The Generac 5719 maintenance kit is designed for the 410 cc engine portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.

• Helps you extend the life and maintain the performance of your portable generator
• Includes air and oil filters
• Includes a spark plug and a spark plug wrench
• Includes an oil funnel, stabil sample and chamois
• Oil funnel
• Chamois
• Stabil sample
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

The Champion Power Equipment 100376 Storm Shield Severe Weather Portable Generator Cover by GenTent with self-attaching, tool less installation is designed for Champion portable generators from 4000-Watt to 12,500-Watt, and allows you to operate your generator safely outside in nearly any type of weather. Adapter kits for inverters are available from GenTent. This generator cover has an innovative self-attaching design and installs easily in three simple steps with no tools necessary. The high-strength clamps and fiberglass frame rods connect directly to the generator, while the detachable wrap-around electrical panel skirt keeps your outlets covered and dry while in use. The Storm Shield cover has the ability to withstand winds up to 70 mph, snow loads up to 18 in. and rain up to 12 in. per day. The cover keeps you protected by allowing you to stay running in the worst of weather conditions when running without a cover would be too dangerous. The self-attaching design of the cover allows the generator to maintain its natural cooling airflow and mobility. Featuring a large refueling door, you can easily refuel your generator in seconds with no need to disassemble or remove the cover. With independent, third party testing and thousands of hours of real world experience, the Storm Shield is designed to perform in some of the most severe weather conditions. Champion Support includes 1-year limited warranty with FREE lifetime technical support from dedicated experts.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Installs easily in 3 simple steps with its self-attaching design
• The large refueling door, omni-fit electrical panel apron and natural airflow design allows for generator operation and maintenance while the cover is on
• Operate your 4000 to 12,500-watt generator with your safety and protection of the generator in mind
• The waterproof cover includes high-strength frame rods designed to withstand winds up to 70 mph, snow loads up to 18 inches and rain up to 12 inches per day
• Champion Support includes 1-year limited warranty with FREE lifetime technical support from dedicated experts

Bracket Bearing

• A12A
• Multiple applications (such as drain pans or anything driven by a size or dimension)
• For Gas Furnace Applications (pilots, flame sensors, etc.)

MFG Part# S1-026-34756-000

• Genuine OEM product
• Multiple applications (such as drain pans or anything driven by a size or dimension)
• For Gas Furnace Applications (pilots, flame sensors, etc.)

The cast iron, lockable fuel cap provides the ability to lock the fuel system. Locking the fuel cap will prevent unwanted fuel tampering or syphoning. The fuel cap is designed specifically for Protector Series Generators.

• Compatible with Generac protector series diesel generators
• Durable Cast Iron
• Fits most pad locks
• Easy to install

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Made with braided stainless steel
• Fire proof
• Easy installation

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

• Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
• Heavy-duty Generac contractor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
• 5 year limited warranty

This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Used to maintain optimal battery temperature in cold-weather environments. Also consider pairing with model 7101 Battery Warmer cold weather accessory.

• Oil warmer slips directly under the oil filter.
• When installing, it is required that oil be replaced with 5W-30 synthetic
• Remove the old component before installing the new warmer.
• All products come with a 1-year limited warranty

The enclosure is the generator's first line of defense against the elements and is important to keep in good condition. If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion. These paint kits include the necessary paint to properly maintain or touch up a generator enclosure. This paint kit is designed for the 2007 model lineup to help ensure corrosion resistance.

• Use to touch up scratches on a generator enclosure
• Compatible with generators manufactured prior to April of 2008
• Helps provide corrosion protection
• Includes 6 oz. spray can and 0.5 oz. touch-up bottle

The Champion Power Equipment C90015 Weather-Resistant Storage Cover is designed to fit your 1200-Watt to 1875-Watt generator to keep it safe, clean and dry. Whether your generator is on a dirty job or in storage, this cover provides vital protection. Once the cover is on your generator, the elastic base will provide a secure, custom-like fit that looks great and provides powerful protection for your generator and its engine. Champions versatile cover also fits generators up to 18.9 in. x 15.8 in. x 14.2 in. in size. This cover is not designed to fit over wheels. Featuring a tough, water-resistant vinyl exterior, this storage cover will keep your generator and its engine protected from sun and UV damage, rain, snow, dirt, debris, dust, cobwebs, tree sap, birds and more. The inside of the cover is lined with cotton to protect your generator and prevent scuff marks and scratches. Protect your valuable Champion generator year round with Champions complete selection of generator covers including 2800-Watt to 4750-Watt and 4800-Watt to 11,500-Watt sizes. Buy with confidence Champion Support will back up your purchase with a 1-year limited warranty.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Protect your generator from sun and UV damage, rain, snow, dirt and more with this covers tough vinyl exterior
• The strong elastic base provides a secure, custom-like fit for your generator
• This cover is designed for 1200-Watt to 1875-Watt generators, but will also fit generators up to 18.9 in. x 15.8 in. x 14.2 in. in size
• The durable cover fits over your generator quickly to protect it while in storage
• Includes 1-year limited warranty with free lifetime technical support from dedicated experts

Designed for use with manual transfer switches and power inlet boxes, these heavy-duty, all rubber power cords connect a portable generator to the power inlet box and/or transfer switch. It includes male and female twist-lock ends. The male plug goes to the generator and the female connects to transfer switch or power inlet box.

• 25 ft., 6-Gauge, 4-wire, 125/250-Volt power cord for portable generators
• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord remains flexible even in subzero temperatures
• Plug connects to generator and receptacle connects to power inlet box and transfer switch

The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.

• 30 Amp, NEMA L14-30
• Raintight design even when the generator cord is connected
• NEMA 3R enclosure is rated for indoor or outdoor installation
• UL Listed

MFG Part# P251-0078

• Genuine OEM product
• Multiple applications (such as drain pans or anything driven by a size or dimension)
• For Gas Furnace Applications (pilots, flame sensors, etc.)