Searched for "26101400"
No job can be completed properly without the right tools and accessories. With HVACR repairs, having the right accessories can help you and your technicians save money and make mney by providing flexible options when replacing expensive OEM designs. Plus, our brand means a better value, helping you meet your budget and enhance profitability.
- 5-5/8" Diameter
- 3-Leg Torsion-Flex Bracket
- Designed to effectively isolate and prevent torsional vibrations from reaching blower housing and
- Includes 3 Grommets, 1 Bolt, 1 Nut, 3 Steel Washers
For Use with 48" Frame (5-5/8") Motors. Comes Complete with Lock-On Hangers and Lock Washers For Security. 3/8" Mounting Hole Fits Carrier and Others.
The most reliable and efficient residential and commercial motors supplied by Packard.Our Packard branded OEM replacement motors cover an almost limitless range of applications. From heavey duty T-frame motors, to the smaller C-frames, we have a selection that can meet your repair requirements big or small.
- Assembled with bracket
- Shaded pole
- Sleeve bearing
- Stud mounting
- Rotation is determined by viewing the shaft end
- 120 Volts
- 0.6 Amps
- CW Rotation
- 3000 RPM
- 60 Hertz
MFG Part# S1-373-19806-100
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Mounting Hardware
- FH40/50/60 UNITS
- FW40/50/60 Series B Units
- 16 PCS
MFG Part# 78L41
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductors 10-Gauge wire with L14-30 male + female ends. UL Listed.
- Connecting link between the generator and the power inlet box and/or transfer switch
- All rubber cord stays flexible even in subzero temperatures
- Molded ends provide greater reliability
- Male plug connects to generator and female end connects to power inlet box/transfer switch
- UL Listed
MFG Part# P251-0078
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.
- Compatible with all Generac 22-150 kW liquid-cooled models
- NEMA/UL 3R (indoor/outdoor rated) rugged steel enclosure
- Heavy-duty Generac contactor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- 5 year limited warranty
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Use to perform a complete maintenance on Generac air cooled generator
- For use with 7 kW, 410cc generator
- Includes an air filter, oil filter, spark plug, spark plug wrench, oil funnel, chamois and reminder sticker
- Oil must be purchased separately based upon manufacturer recommendations listed below
The alarm panel alerts the fuel fill operator when the tank reaches a 90% fill level by sounding an audible alarm and triggering an LED warning light. The panel mounts within the fuel fill and vents area of the generator enclosure and is housed in a NEMA 3R powder painted, steel enclosure. All mounting hardware and connection wire is included.
- Compatible with protector series diesel generators
- NEMA 3 indoor/outdoor rated
- Installation hardware included
- Easy installation
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- Service entrance rated 100 Amp 120/208-Volt 3 phase automatic transfer switch
- 5 year limited warranty
Motor Mount
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.
- Air and oil filters
- 6 spark plugs
- Reminder sticker
- Pre-cleaner
- Oil funnel
- Chamois
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Mounting Plate
- Venter Motor Plate
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Mounting Grommet
- 5/8x.281
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 1.6 l Engines helps your automatic standby generator maintain an ideal battery temperature. The kit is recommended for use in areas where the temperature drops below 30 degree F. For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below 30 degree F
- For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
- Includes a battery warmer with an automatically controlled thermostat
The Generac Maintenance Kit for Portable Generators makes it easy to perform routine maintenance on your portable generator to achieve top performance. The kit includes air and oil filters, a chamois and other necessary tools. This kit is designed for a 992 cc engine.
- Helps you extend the life and maintain the performance of your portable generator
- Includes air and oil filters
- Includes a spark plug
- Includes an oil funnel, stabil sample and chamois
- Oil funnel
- Chamois
- Stabil sample
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.
- Compatible with Generac 15 kW and 20 kW protector series diesel generators
- Made with braided stainless steel
- Fire proof
- Easy installation
The Generac 5720 maintenance kit is designed for the XP10000E and XG10000E portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Tune-up kit keeps your generator running at optimum performance
- Generac portable generator maintenance kit is designed for XP10000E and XG10000E generators
- Contents: air filter, oil filter, oil funnel, spark plug, fuel stabilizer, and chamois
- Oil must be purchased separately, short description
Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.
- Compatible with Generac 50 kW protector series diesel generators
- Includes all necessary hardware
- Instructions included
- Easy installation
Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductor, 6-Gauge wire with 50 Amp male (1450) + female (CS6364) ends. Made from UL Listed components.
- Connecting link between the generator and the power inlet box and/or transfer switch
- All rubber cord stays flexible even in subzero temperatures
- Male plug connects to generator and female end connects to power inlet box/transfer switch
- Made with UL Listed components
The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines. The block heater works in conjunction with a battery warmer to provide quick starting capability. For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are Designed to outperform the competition.
- Heavy-duty Duramax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
Motor Mount
- 48 Frame
- 2.5" Ring Dia x 7.06" On Center
- 5-5/8" Motor Diameter
6.86 Inch Diameter
- 6.86" Dia.
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 622340R
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Motor Mount
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Generac Extreme Cold Weather Engine Block Heater for Generac Liquid-Cooled Automatic Standby Generators gives an extra degree of weather protection to your Generac 25 kW or 30 kW liquid-cooled automatic standby generator. A block heater, step-by-step installation instructions and the necessary mounting hardware are included. Works in conjunction with a battery warmer to provide quick starting capability.
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
Bracket Bearing
- A12A
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Champion Power Equipment 100372 8.5kW Home Standby Generator Maintenance Kit includes everything you need to extend the life and function of your generator. The kit includes a spark plug (F7RTC) and an air filter. Scheduled maintenance is key to extending the life and function of a home standby generator. Proper generator care not only reduces the likelihood of costly repairs but also ensures the generator will be ready to provide power to your home during emergencies. Owning this kit will make it much easier to keep up with scheduled maintenance since you'll have just what you need on hand to keep your home standby generator in top condition. Don't wait until the power is out to discover you forgot to change the oil or replace a spark plug. Peace of mind comes with proper planning. Maintenance is recommended every 2-years or 100-hours of use. Champion recommends that you follow your model's specific maintenance schedule for exact intervals. Service should be sooner if you're operating your generator in high ambient temperatures or a dusty and dirty environment. Buy with confidence - Champion will back up your purchase with a 1-year limited warranty.
- Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
- Keep your generator ready to power your home during emergencies
- Includes a spark plugs and air filter
- Extend the life of your generator and avoid costly repairs
- Manage your high demand 240-Volt appliances
- Includes 1-year limited warranty with free lifetime technical support from dedicated experts
The Generac Scheduled Maintenance Kit for Standby Generators with 1.6 l Engines helps you complete scheduled maintenance on your standby generator. Scheduled maintenance is crucial to keeping your Generac generator running smoothly. The kit included.
- Air and oil filters
- 4 spark plugs
- Reminder sticker
- Oil funnel
- Chamois
The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery warmer with a thermostat built-in to the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F (0 degree C). When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
- Compatible with generic 30 kW protector series diesel generators
- Battery warmer: 120-Volt, 75-Watt, 0.63 Amp
- Instructions included
- Easy installation
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.
- Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
The cast iron, lockable fuel cap provides the ability to lock the fuel system. Locking the fuel cap will prevent unwanted fuel tampering or syphoning. The fuel cap is designed specifically for Protector Series Generators.
- Compatible with Generac protector series diesel generators
- Durable Cast Iron
- Fits most pad locks
- Easy to install
Scheduled maintenance is a necessity for all standby generators. The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac air-cooled generators. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Air and oil filters included
- 2 spark plugs included
- Reminder sticker included
- Oil funnel included
- Chamois included
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
- LIEBERT Blower Motor: 1/2 HP, 200-230 Volt, 900/1075 RPM
- Thermally Protected
- Capacitor Needed: 10MFD @440v
- Ensures efficient operation of equipment
- Easy installation
- MFG# 159267P1S
Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.
- Compatible with Generac 15 kW and 20 kW protector series diesel generators
- Includes all necessary hardware
- Instructions included
- Easy installation
The Utility Brown Out Kit provides an option for areas that regularly experience utility brown outs by increasing the threshold that the utility power must achieve before allowing drop out or pick up. This ensures the proper voltage is fed into the transfer switch coils. Main features include.
- 240-Volt relay timer, 8 position, 600-Volt, 10 Amp socket relay and associated hardware
- Allows the nominal voltage pick up percentage to be increased to 90%
- Allows the nominal drop out, pick up percentage to be increased to 95%
- Compatible with: RTSX, RTSD, RSTE, RTSN, EZ switches up to 400 Amp, single phase (not compatible with GenReady)
Mounting Bracket
- For Swept Fan
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Cold Weather Kits consist of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F.
- When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability
- 120-Volt
- 80-Watt
- 0.67 Amp
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Motor Mount
- 24" Blade
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 100 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
- Service rated generac automatic transfer switches are housed in an aluminum nema/ul type 3r enclosure, with electrostatically applied and baked powder paint
- Heavy-duty generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- Used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
- Switch is covered by a 5-year limited warranty
- Long lasting beauty
Mounting Plate
- CRP/V
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The enclosure is the generator's first line of defense against the elements and it's important to keep it in good condition. Use the paint kit to touch up scratches and other damage to protect from future corrosion. Kits include the necessary paint to properly touch up a generator enclosure.
- Touch up the enclosure of your generator by using the Generac tan generator paint kit for 2007 models
- Use touch up paint to cover scratches and any damages on the enclosure for corrosion protection
- Designed for generators manufactured prior to April of 2008
- Includes 6 oz. spray can and 1/2 oz. touch-up bottle
The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators. The heater works in conjunction with a battery warmer to provide quick starting capability. Includes a block heater, step-by-step installation instructions.
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
MFG Part# S1-026-34756-000
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)