Searched for "31162800"
Shelf support for shelves. In cabinets, vanities and medicine cabinets. Usually determined by the peg hole size.
- Will hold 1/2 in. shelves
- White
- Will hold shelves of different materials
- Made of plastic
- Use maximum clips required
- .
This bi-fold door repair kit includes replacement parts to repair one 2-panel set of hinged bi-folding doors. The plastic bases of the pivots and guide measure 3/8 inch in outside diameter, and the guide features a 7/8 inch outside diameter plastic wheel. A steel bottom pivot bracket and door aligner are also included, together with a wooden knob that can be finished in stain or paint. The snugger has a white plastic body with a steel spring, and the fasteners for all components are included with each package. Hinges are not included with this kit. These components are used by a variety of bi-folding closet door manufacturers. Tip: In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provides for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening.
- REPAIR BI-FOLDING DOORS - Easily repair one set of wood or metal hinged bi-folding doors with this all-inclusive DIY kit. For use with 3/8 inch outside diameter pivots and guides in a 7/8 inch wide bi-fold door track.
- INCLUDES - This bi-fold door repair kit includes top and bottom pivots, 7/8 inch plastic guide wheel, steel bottom pivot bracket, wooden knob, white plastic snugger with steel spring, steel aligners and fasteners for all components. Please note: Track and hinges are not included.
- CUSTOMIZABLE WOODEN KNOB - The kit includes an unfinished wooden knob that can be stained or painted to match existing finishes.
- EASY AND ECONOMICAL - With everything needed to repair one 2-panel set of hinged bi-folding doors, you can quickly and easily fix an existing door rather than purchase a new one.
- INSTALLATION TIP - In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provide for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening. If you need to repair both pairs (or all 4 doors), please purchase two kits.
- Repair kit contains parts for a single set of bi-fold doors
- Must purchase 2 sets if you need to replace both pairs (4 doors)
- For further dimensional information, please see the line drawing
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
Spring loaded top guide and pivot. 7/16 in. Dia cap with 7/16 in. Dia nylon base. Used by Johnson and others.
- Spring-loaded
- Nylon roller is 7/8 in. Dia
- White in color
- Fits Kenna frame and others
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
The ClosetMaid 4-Gauge pole clips are exclusively designed for the ClosetMaid traditional fixed-mount system for installing ventilated wire shelving. For use with shelf support poles when installing multiple levels of stacked shelves. Comes in a carton of 1000 clips.
- Provides side wall support
- Supports the front lip of shelving where it meets the side wall
- Required every 36 in. of shelving
- For concrete or stud installation
- Can be used for dry wall applications with an anchor and screw (sold separately)
- Installation hardware sold separately
- Material: resin
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
The Everbilt 12 in. shelving support brackets (2-pack) are exclusively designed for the Everbilt fixed-mount system for installing ventilated wire shelving. Durably made of steel with a white coated finish, these brackets are designed to use with any 12 in. ventilated shelf and any 16 in ventilated shelf when used in a hanging application. Attach the shelving with wall clips (both sold separately) and then add the shelf support brackets for a sturdy storage area.
- Works with fixed mount shelving system
- Brackets can be spaced up to 36 in. apart, space closer together for additional support
- Solid steel construction for strength and stability with white coated finish
- Use with any 12 in. ventilated shelf and any 16 in. ventilated shelf when used in a closet hanging application
- All hardware included for easy installation
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. Dia base
- Steel pivot screw and nylon base
- Pack of 4
- No tools required for installation
- For further dimensional information, please see the line drawing
The Everbilt Fixed Rod Shelf Wall Bracket is designed support the front lip of any Everbilt Fixed Rod ventilated wire shelf. For use in a wall-to-wall or wall-to-open application. Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately). All hardware included for installation. Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H
- Works with Everbilt Fixed Rod Shelving
- Supports front lip of shelf where it meets the side wall
- Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately)
- White Finish
- Includes 2 wall brackets and mounting hardware
- Hardware included
- Designed to support the front of ventilated wire shelving
- Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H
The ClosetMaid Shelf End Brackets are exclusively designed for the ClosetMaid traditional fixed-mount system for installing ventilated wire shelving. Used to secure the end of wire shelving to the wall on the sides. Comes in a carton of 600 brackets.
- Plastic anchors required (not included)
- Screws required (not included)
- For stud or wood-mount applications
- Can be used for drywall applications with an anchor and screw (not included)
- Material: plastic
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
Strybuc Strybuc Bi-Fold Door Floor Guide One Piece Construction For 1-3/8" thick Bi-Fold doors 4-1/4" center to center mounting hole spacing Direct replacement for SKU 838500 Mfg #8-208-4
- One Piece Construction
- For 1-3/8" thick Bi-Fold doors
- 4-1/4" center to center mounting hole spacing
- Direct replacement for SKU 838500
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This closet shelf and pole support bracket is constructed from steel. It comes finished in white and is used with 12 in., shelves. This type of bracket supports a 1-3/8 in., pole. Can be used for wood or wire shelving.
- Pole supports for standard 1-3/8 in wood pole
- White powdered coated steel prevents rust and corrosion
- Steel construction
- Supports 12 in., deep shelves
- 10 x 1-1/4 in., pan head tapping screws 4 pcs, 10 x 3/4 in., pan head tapping screws included
- For further dimensional information, please see the line drawing
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
Designed for larger projects, the Everbilt Fixed Mount Concrete/Stud Wall Clips (Contractor 12PK) is designed to install on the back rod of ventilated wire shelving in a fixed mount application to prevent the shelf from popping up at the rear. The clip is designed to work with the wall clip to hold the shelf firmly in place. Metal screws and plastic anchors are included for installing the down clips on drywall, wood studs or concrete.
- Clips keep ventilated wire shelving secured in place
- For use with fixed mount installations
- Hardware for drywall, concrete and wood stud installation
- White PVC plastic construction for durability
- Set includes 12 clips with anchors and screws
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
This is an Western style screen door pneumatic closer for light weight West Coast outswing screen doors. It has a white finish and comes complete with mounting brackets and attaching hardware. Internally lubricated and has an adjustable closing feature to insure that the door is latched securely.
- Plated handrail bracket has adjustable end clip for tilting handrails
- Universal design
- Brass plated finish
- Includes fasteners
- Mounting hardware is included
- Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
These kickplates come with matching finish mounting screws and are designed for convenient door protection. 6 in. or 8 in. tall door kick plates are available in different lengths from 30 in. to 34 in. Kickplates are typically the width of the door less 2 in.
- 8 in. x 34 in. overall size
- Stainless steel
- Easy installation
- 0.050-Gauge
This balance is for tilt windows. The color of the bearing determines the sash weight range of the balance. The length of the balance is determined by measuring the length of the tube ONLY, and do not include the bearing or rod in the measurement. The rod is a standard rod which extends beyond the tube. The tube diameter is 3/8 in. Make sure your balance matches the specs of this balance before ordering. Specific ends and accessories should also be ordered and replaced with new balances.
- Always replace both balances on each sash to insure proper operation
- You will need to remove the old balance from the window in order to determine the replacement
- Color bearing determines correct sash weight range, and is needed for correct replacement
- Replace balance ends and accessories for best results
Injected nylon bottom guide for sliding tub enclosure doors. Fits 1/2 in. thick door rails. Used by International.
- Keeps sliding tub enclosure doors aligned
- Used by enclosures manufactured by International
- Clear in color
- Fits 1/2 in. thick door panels
- Double sided tape included
- For further dimensional information, please see the line drawing