Searched for "39121300"
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
TAYMAC in-use device covers provide weatherproof protection when an outlet is in use. In-use covers are made are made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Patented quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Horizontal or vertical mount
- Lockable tab (1/4 in. shackle)
- 16-in-1 configurations
- 2-3/4 in. deep
- NEMA 3R compliant
The Carlon 1-Gang 8 cu. in. Old Work Flanged Shallow Box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC. Great for use in existing shallow walls, the box is crafted with PVC and features a front flange for mounting directly to surfaces. It is fire rated and UL listed to help ensure safety.
- For use in existing shallow walls
- Great for residential and light commercial use
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- PVC construction
- Front flange for mounting directly to surfaces
- Fire rated and UL listed for safety
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed and 2-hour fire rating for safety
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Bell Weatherproof covers designed to expand from an inch to 3" while an outlet is in use. EXTRA DUTY rated. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Clear window allows for quick/easy visual inspection
- 100% paintable surface
- 16-in-1 configurations
- NEMA 3R compliant
- EXTRA DUTY rated
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Provides weatherproof protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab
- 16-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R compliant
Designed to provide protection for an outdoor receptacle. Self-closing lid. Mounts to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weather ability and scratch-resistance
- Duplex cover
- Horizontal mount
- Rugged metallic construction
- NEMA 3R compliant
- Installation hardware, gasket and multi-lingual instructions are included
The Junction Box is made from plastic and is CSA and UL listed with a NEMA 6P rating per Section 314.29, Exception of the NEC. It features a foam-in-place gasket lid with stainless steel screws. The box is designed to provide protection against external ice formation, falling dirt, hose-directed water and water entry during prolonged submersion.
- For indoor and outdoor use
- Plastic construction
- Foam-in-place gasket lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA type 6P and type 4/4X ratings
- CSA and UL listed and fire rated to help ensure safety
The Junction Box is UL listed with a NEMA 6P rating per Section 314.29, Exception of the NEC. The box is made with a thermoplastic material and features a gasket lid attached with stainless-steel screws. It provides protection against falling dirt, hose-directed water, external ice formation and the entry of water during prolonged submersion.
- For indoor and outdoor use
- Thermoplastic construction for durability
- Gasketed lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA 6P and type 4/4X ratings
- CSA and UL listed and fire rated to help ensure safety
We are proud to offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlet
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2-5/8 in. deep
- 36.0 cu. in.
- 2 closure plugs included with each box
Surface covers used to support switches or receptacles in areas where the box is surface mounted or poitioned in exposed work applicaations. Exposed work covers are 1/2" raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- 30-60A Reecptacle
- Meets the requirements of the 2020 NEC Article 250.146 (A)
- 6.5 cu. In. capacity
- Hardware installation instructions preprinted on packaging
Weatherproof device covers are designed to provide protection for an outdoor receptacle. Covers have a self-closing lid. Covers mount to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- Horizontal mount
- Rugged metallic construction
- NEMA 3R compliant
- NEMA 3R rated
Manufactured from durable pre-galvanized steel. UL and CSA Listed. Captive device screws.
- Cover made from zinc, pre-coated, steel
- Houses duplex receptacle
- Cover includes captive mounting screws
- Meets UL and CSA compliance
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
Weatherproof device covers provide protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Patented quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab (1/8 in. shackle)
- 55-in-1 configurations
- NEMA 3R compliant
Designed to provide weatherproof protection when a box is being used for junction. Flat face profile. Gasket, mounting hardware and installation instructions included.
- Rugged die-cast construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- Flat, blank cover
- Horizontal or vertical mount
- Gray
- NEMA 3R rated
Used to support switches or receptacles. UL and CSA listed. Captive device screws included.
- Cover made from zinc, pre-coated, steel
- Blank cover
- Captive mounting screws
- Meets UL and CSA compliance
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
Bell Cluster Covers designed to provide weatherproof protection for outdoor applications. Provides convenience for mounting lampholders and accessories. Installation hardware, gasket, and multilingual instructions are included.
- Rugged diecast construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- No closure plugs included
- UL recognized
BELL products provide weatherproof protection when box is used for junction. Flat face profile. Includes gasket, mounting hardware and installation instruction.
- State-of- the-art powder coat finish provides maximum weatherability and scratch resistance
- Rugged metallic construction
- Device mount
- NEMA 3R compliant
Weatherproof cluster covers are designed to provide protection for outdoor applications. Covers provide convenience for mounting lampholders and accessories. Installation hardware, gasket and multilingual instructions are included.
- Rugged die-cast construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- One 1/2 in. outlets and 2 closure plugs
- Horizontal or vertical mount
- Gray
- NEMA 3R rated
We offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
The 1-Gang 20 cu. in. Ceiling Box supports a ceiling fixture. Durable polycarbonate material is highly heat-resistant and non-conductive to safety support light fixtures. The box is designed for new residential or light commercial projects and uses an adjustable bar hanger, ground lug and screw for efficient installation.
- Listed for use with fixtures up to 50 lb.
- Supports 3/0 and 4/0 fixture
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Adjustable 14-3/8 in. to 22-1/2 in. bar
- Ground lug included
- UL-Listed
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
The 1-Gang Weatherproof T-Box can be used with non-metallic wiring systems. Made of durable PVC, the T box is suitable for wet or damp locations. The box will not rust or corrode making it an ideal choice for outdoor, weatherproof applications.
- For use with non-metallic wiring systems only
- Can be used with lamp holders
- Made of durable PVC that will not rust or corrode
- Comes with three 1/2 in. threaded holes
- Mounting feet make for easy installation
- Suitable for use in wet or damp locations
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Combination screw heads allow quick installation
- Welded construction
- (8) 1/2 in. knockouts and four TKO knockouts
- UL Listed
- 30.3 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
Provides protection for an outdoor receptacle or switch. Made from superior commercial quality die-cast metal. Premium powdercoat finish provides corrosion resistance. Includes a gasket, mounting hardware and instructions.
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Pre-configured for GFCI with knock-out technology for alternate devices
- Lockable tab
- 12-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R Rated
Weatherproof device covers are designed to provide protection for an outdoor receptacle. Covers have a self-closing lid. Covers mount to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- GFCI
- Horizontal mount
- Rugged metallic construction
- NEMA 3R compliant
- Installation hardware, gasket and multilingual instructions are included
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
RACO SADDLE-BOX 7120 series boxes are specifically designed for use in ceiling fan support or heavy lighting fixture applications. The unique U-shaped design allows box to mount on any standard 1-1/2 in. W joist. Fan/Fixture mounting hardware hidden behind protective decal until ready for mounting. Screw heads are not exposed to drywall mud and paint.
- Large 12.5 cu. in. wiring compartment
- For 1/2 in. 5/8 in. or 3/4 in. drywall
- Nonmetallic cable clamps (no need for separate connector)
- UL Listed
Universal 1-Gang Shallow In-Use Extra Duty cover allows extension cords to be covered while in use. Meets stringent extra duty requirements as required by the NEC. Non-Metallic material is paintable to match any household decor.
- Deep 4-1/4 in. inside depth
- Wasp guard
- Stainless steel hinge pin
- Mounts horizontal or vertical
High impact resistant thermoplastic Round Floor Box cover. Non-Metallic, for use with Duplex Devices. Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles.
- Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles
- Approved for all types of finish flooring
- UL scrub water tested
- UL E11461
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Bell offers a selection of weatherproof boxes that are made of rugged, seamless die-cast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged die-cast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
Made of rugged, seamless die-cast construction which will not allow entry of moisture. Reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weather-ability and scratch-resistance
- 18.3 cu. in. capacity
- NEMA 3R rated