Searched for "39121409"
Insulated female disconnects leave turned up edges for increased retention, safety and reliability. Electro-tin-plated copper with butted seam. Made with vinyl.
- Wire range: 16-14 AWG
- Stud size: 0.250
- 600-Volt
- 105 degree C
Insulated female disconnects leave turned up edges for increased retention, safety and reliability. Electro-tin-plated copper with butted seam. Made with vinyl.
- Wire range: 12-10 AWG
- Stud size: 0.250
- 600-Volt
- 105 degree C
- 0.250 x 0.032 tab
Insulated female disconnects leave turned up edges for increased retention, safety and reliability. Electro-tin-plated copper with butted seam. Made with vinyl.
- Wire range: 22-18 AWG
- Stud size: 0.250
- 600-Volt
- 105 degree C
Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. Disconnects have a vinyl insulated barrel and are rated at 600-Volt maximum.
- Used for waterproof installation or repair of 8 - 2 AWG copper cable
- Vinyl-insulated
- Rated at 600-Volt maximum
- Temperature rating: 167 degree F (75 degree C)
Constructed from electro-tin-plated copper tubing. The center stop provides equal insertion of wires. Made with vinyl.
- Vinyl (PVC)
- Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
- Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
- 600-Volt
Fully Insulated Female Disconnects are entirely covered in an insulating nylon. Turned up edges give this spade more safety and reliability. Rated 300-Volt.
- Tab size: 0.250 x 0.032
- Stud size: 0.250
- Wire size: 16-14
- 105 degree C
This kit contains heavy wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller O.D. lead wire being used on submersible pump motors. This tubing is suitable for applications up to 600-Volt providing excellent waterproof insulating and environmental sealing protection for connections. High impact and abrasion resistance of this heavy wall tubing provides the highest level of mechanical durability. When heated above 250 degree F (120 degree C) there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery (approximately 0.08 in./2 mm when fully recovered).
- For splicing #14, #12, #10 cable to 3-wire submersible pump motors
- Will work with newer smaller diameter submersible lead wires
- Shrinks to a durable abrasion resistant skin tight fit
- When heated above 250 degree F (120 degree C) tubing shrinks forcing adhesive to flow which forms a permanent non drying waterproof barrier that remains flexible
- Fast recovery heat shrink tubing
Southwire split bolts are used in applications such as splicing, tapping, and terminating conductors in grounding applications. This bolt is constructed from a durable copper alloy. Specified for use with #2 STR - #2/0 STR Wire.
- cULus listed
- # 2 STR - 2/0 STR equal run and tap
- Minimum tap with maximum main: # 14 SOL/STR
- Rated 600-Volt/90C
- 1-pack
The Split Bolt Connector, Equal Main and Tap Range 6 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol is a bolt and nut of high-strength corrosion-resistant bronze alloy. This item is tested and listed to UL486C, UL467 for grounding and for direct burial. The pressure bar is copper through 40H, copper alloy for 350 kcmil and above.
- Bolt and nut of high-strength corrosion-resistant bronze alloy
- Pressure bar is copper through 40H, copper alloy for 350 kcmil and above
- Bolt and nut of hex design up to 350 kcmil
- Tested and listed to UL486C, UL467 for grounding and for direct burial through Cat. No. 40H
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45 degree C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90 degree C, not recommended for fine-stranded, flexible wire, UL Listed
Vinyl male disconnects have turned up edges to give disconnect more safety and reliability. They are electro-tin plated. They are cULus Listed.
- Wire range: 16-14
- Stud size: 0.250
- Butted seam
- 300-Volt, 75 degree C
Southwire offset lugs are used in termination of a conductor. These lugs are designed for single hole mount. Durable copper alloy construction. Specified for use with #8 STR - #2 STR Wire.
- cULus Listed
- Wire range: # 8 STR - # 2 STR
- Single 1/4 in. hole mount
- Rated 600-Volt/90°C
- 2-pack
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45 degree C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90 degree C, not recommended for fine-stranded, flexible wire, UL Listed
Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. The Underground UF Splice Kit accommodates waterproof splicing of 14 - 8 AWG UF copper wire.
- Connector set screws engage each wire securely for a solid splice
- Minimum conductor size 14/2 with ground
- Maximum conductor size 8/3 with ground
- Rated at 600-Volt maximum
- Kit contains 4 screw splice connectors and one 8 in. heavy-wall polyolefin heat-shrink tubing with watertight adhesive liner
Wago Lever Nuts 5 Wire Conductor Compact Splicing Connectors,. Wago Lever Nuts 5 Wire Conductor Compact Connectors. 5-Wire Compact Splicing Connector. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #0221415K00-012. Mfg #0221415K00-012
- Wago Lever Nuts 5 Wire Conductor Compact Connectors
- 5-Wire Compact Splicing Connector
- Connects Wire Conductors From 24 To 12 AWG
- For Use With Solid, Stranded Or Fine Stranded Conductors
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 4 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol. Both the bolt and nut are made of high-strength corrosion-resistant bronze alloy.
- High strength split-bolt connector
- Conductor range for equal main and tap 4 sol-8 sol
- Bolt and nut of hex design
- UL E9809
ISR series insulated in-line splice connectors are suitable for connecting 2-wires. Abrasion and chemical resistant. UV rated. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
- Will not support combustion
- Cold temperature rated to -45 degree C
- Insulated with high dielectric strength plastisol and molded for precise fit
- Supplied with removable access plugs over the hex screw
Constructed from electro-tin-plated copper tubing. The center stop provides equal insertion of wires. Made with vinyl.
- Vinyl (PVC)
- Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
- Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
- 600-Volt
Type APS Tin-Plated Aluminum Dual-Rated Split-Bolt Connector for Use on Copper. Aluminum Conductors. Conductor Range for Equal Main and Tap 6-10 Str. Splicing, tapping or terminating conductors in power and grounding electrical connection.
- Type APS
- Tin-plated aluminum
- Installs with standard wrenches
- UL E9809
Fitting, Non-Metallic Sheathed Cable, Knockout Size 1/2 in. Length 1-1/32 in., Height 1-5/16 in., Hole Size 5/16 in. x 9/16 in., Thermoplastic. For use with 10-2, 12-2 and 14-2 Non-Metallic Cable, 18-2 and 18-3 SJ and SJO Cords and 18-2 SV, SVO, SJT and SJTO Cords, Single or Multiple, Cord Capacity 0.125-0.300 in. in Diameter.
- Conductor range 14 AWG-2/0 Str
- Tin plated
- 1-hole mount
- UL E9809
ISR series insulated in-line splice connectors are suitable for connecting 2-wires. Abrasion and chemical resistant. UV rated. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
- Will not support combustion
- Cold temperature rated to -45 degree C
- Insulated with high dielectric strength plastisol and molded for precise fit
- Supplied with removable access plugs over the hex screw
- Helps Secure Pump Wire Leads To Cable
- Self-Sealing Tubing Provides Quick, Leak-Proof Splicing
- Connects #14, #12 Or #10 Gauge Wire with Crimp Connectors
- For Splices Exposed To Sunlight
Shrink-Kon Thin-Wall Heat Shrinkable Tubing Assortment. Precut in 6 in. Lengths, Black, (32) Diameter 3/16 in., (20)-Diameter 1/4 in., (8)-Diameter 3/8 in., (6)-Diameter 1/2 in., (4)-Diameter - 3/4 in., (4)-Diameter - 1 in. Includes Plastic Storage Case.
- Flame-retardant
- Cross-linked polyolefin
- Plastic storage case
- Meets UL 224
Wago Lever Nuts 2 Wire Conductor Compact Splicing Connectors,. Wago Lever Nuts 2 Wire Conductor Compact Connector. 2-Wire Compact Splicing Connector. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #221-412/K000-0012. Mfg #0221412K00-012
- Wago Lever Nuts 2 Wire Conductor Compact Connector
- 2-Wire Compact Splicing Connector
- Connects Wire Conductors From 24 To 12 AWG
- For Use With Solid, Stranded Or Fine Stranded Conductors
Blackburn Type APS Tin-Plated Aluminum Dual-Rated Split-Bolt Connector. For Use on Copper, Aluminum Conductors. Conductor Range for Equal Main and Tap 2-8 Str.
- Installs with standard wrenches
- Tin-plated aluminum
- Use on copper, aluminum conductors
- UL E9809
Southwire split bolts are used in applications such as splicing, tapping, and terminating conductors in grounding applications. This bolt is dual-rated for 2 dissimilar metal conductors. Specified for use with #8 STR - #2 STR Wire.
- cULus listed
- Run: # 8 STR - # 2 STR
- Tap: # 8 STR - # 2 STR
- Dual-rated for Al and Cu conductors
- Rated 600-Volt / 90C
- 1-pack
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45 degree C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90 degree C, not recommended for fine-stranded, flexible wire, UL Listed
Blackburn Dual-Rated Mechanical Connector. Type ADR-ALCUL Two-Conductor, One-Hole Mount, Conductor. Wire range 14 AWG-2/0 Str. Connector is made a tin-plated aluminum.
- Conductor range 14 AWG-2/0 Str
- Tin plated
- 1-hole mount
- UL E9809
Constructed from electro-tin-plated copper tubing. The center stop provides equal insertion of wires. Made with vinyl.
- Vinyl (PVC)
- Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
- Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
- 600-Volt
Wago Lever Nuts 3 Wire Conductor Compact Splicing Connectors,. Adamax Wago Lever Nuts 3 Wire Conductor Compact Connectors. 3-Wire Compact Splicing Connector. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #0221413K00-012. Mfg #0221413K00-012
- Adamax Wago Lever Nuts 3 Wire Conductor Compact Connectors
- 3-Wire Compact Splicing Connector
- Connects Wire Conductors From 24 To 12 AWG
- For Use With Solid, Stranded Or Fine Stranded Conductors
Gardner Bender® 80-Piece Assorted Wire Connector Terminals Kit. Kit Contains: 8 Miniature Gray, 5 Small Orange, 4 Medium Yellow And 4 Large Red Connectors;. Kit Contains: 5 #12-16 Awg Ring Terminals; 5 #16-14 Awg Ring Terminals; 5 #12-10 Awg Ring Terminals; 5 #22-16 Awg Spade Terminals; 5 #16-14 Awg Spade Terminals; 5 #12-10 Awg Spade; 5 #16-14 Awg Male Disconnects; 5 #18-14 Awg Tap Splices; 5# 22-16 Awg Butt Splices; 5 #16-14 Awg Butt Splices. Pkg Of 80. Mfg #TK 100
- Kit Contains: 8 Miniature Gray, 5 Small Orange, 4 Medium Yellow And 4 Large Red Connectors;
- Kit Contains: 5 #12-16 Awg Ring Terminals; 5 #16-14 Awg Ring Terminals; 5 #12-10 Awg Ring Terminals; 5 #22-16 Awg Spade Terminals; 5 #16-14 Awg Spade Terminals; 5 #12-10 Awg Spade; 5 #16-14 Awg Male Disconnects; 5 #18-14 Awg Tap Splices; 5# 22-16 Awg Butt Splices; 5 #16-14 Awg Butt Splices
- Pkg Of 80
- TK 100
Wago Lever Nuts 2 Wire Inline Splicing Connectors,. Wago Lever Nuts 2 Wire Inline Splicing Connectors. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #02212401K000004. Mfg #02212401K000004
- Wago Lever Nuts 2 Wire Inline Splicing Connectors
- Connects Wire Conductors From 24 To 12 AWG
- For Use With Solid, Stranded Or Fine Stranded Conductors
- Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down
Southwire split bolts are used in applications such as splicing, tapping, and terminating conductors in grounding applications. This bolt is constructed from a durable copper alloy. Specified for use with # 6 STR - # 2 STR Equal Run and Tap.
- cULus listed
- # 6 STR - # 2 STR equal run and tap
- Minimum tap with maximum main: # 14 SOL/STR
- Rated 600-Volt/90C
- 1-pack
Southwire split bolts are used in applications such as splicing, tapping, and terminating conductors in grounding applications. This bolt is constructed from a durable copper alloy. Specified for use with # 4 STR - 1/0 STR Equal Run and Tap.
- cULus listed
- # 4 STR - 1/0 STR equal run and tap
- Minimum tap with maximum main: # 14 SOL/STR
- Rated 600-Volt/90C
- 1-pack