Searched for "40101600"
Ceramic fuse link for HX Fan Coil Units
- Yellow color code
- Opens at 300 degree F
- GSA approved
- Provides reliable back-up protection for temperature controlling thermostats.
- Applied to millions of appliances and personal care products.
- Used in office machines, portable heaters and industrial equipment as a thermal safeguard.
- 10 Amps @ 250VAC
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.
- Brass construction
- Industry standard cap
- Neoprene seal
- 1/4 in.
Hard start relay and start capacitor, gives additional starting torque up to 500%. For all single phase 120/288VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For severe Low-Voltage or hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 thru 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.
- Foot mount
- Primary: 120-Volt / 208-Volt / 240-Volt
- Secondary: 24-Volt
- Output VA: 40 VA
Fusible link assemblies are safety devices mounted in ceramic holders. Tear drop shaped ceramic holders with a screw mounting hole at the small end and two 1/4" quick connects for convenient hook-up. Open: 300 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- Sold 5 per pack
This is a genuine part. Built with durability in mind. Transformer.
- 230-Volt to 24-Volt - for use with GOODMAN and Amana equipment
- Transformer
- Color: gray
- 240-Volt
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF 5.63 in. x 2.6 in., R-410A. Flow Capacity Tons at 1 psi Delta P 5.1. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Liquid Line Solid Core Filter Drier. 3 in. ODF, 6.22 in. x 2.5 in. Flow Capacity (ARI Standard 710.86) Tons at 1 psi Delta P Refrigerant 134A=4.4, R-22=4.8, R410A=4.9, R-404A/R507=3.2. Economical system protection for residential air. conditioning ODF - solid copper connections for easy installation Solid core construction with 40 micron filtration Maximum working pressure = 680 psi For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Hardstart relay and start capacitor, gives additional starting torque up to 300% for all single phase 120/288 VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For low voltage and hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 through 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
0130F00041 GOODMAN Replacement Furnace Pressure Switch complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that 0130F00041 replacement Furnace Pressure Switch is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
Thermal cut-offs provide protection against overheating when the design limit temperature of a circuit is reached. Thermal cut-offs are temperature sensitive, one-time devices which open the circuit when operating temperatures exceed the rated temperature of the cut-off . Open: 333 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- 5 per pack
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- 0.7 SP
- Optimum performance
ACS-4 In-line switch is designed to detect condensate drain line clogs or blockages and shut off equipment or alert users to the potential overflow condition. ACS-4 installs on 3/4 in. PVC condensate drain pipe in either a horizontal or vertical position. Using the included 3/4 in. drain pan fitting, ACS-4 can also be installed directly at the drain pan primary or auxiliary outlet to detect pan overflow.
- Installs horizontally or vertically for confined spaces
- Reliable mechanical switch and polymer float
- Shuts off equipment when clog or blockage backs up condensate water in the drain line
- Can be simultaneously be connected to a warning light, audible alarm circuit or BMS/BAS system in addition to connection for equipment shut down
Hard start kit 3-1/2, 4, 5
- High-quality steel housing for enhanced durability
- Conveniently holds water at a capacity of up to 19 gal.
- Efficiently operates at a maximum pressure of up to 100 PSI
- Electrostatically applied polyester paint resists corrosion
Liquid Line Solid Core Filter Drier, 3/8 in. ODF, 5.43 ft. x 2.5 in. Flow Capacity (ARI STD 710.86) Tons at 1 psi Delta P Refrigerant 134a=3.8, R-22=4.1, R410=4.2, R-404a/R507=2.7. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
The 5-2-1 compressor saver protects vital air conditioner components by significantly reducing the amount of time it takes for your compressor to start, in some cases up to 50%. This means that your air conditioner and compressor will bear half the stress, strain, and heat each and every time it starts. This compressor might save thousands of dollars by not having to replace the air conditioner.
- 3 wire hard start kit is pre-wired potential relay and start capacitor
- Reduces time compressor is on high amp start up, which helps prevent the dimming effect of household lighting
- Three color coded wires to connect for ease of installation Instant re-start
- For use on reciprocating and scroll compressors
Liquid Line Solid Core Filter Drier. 3/8 in. ODF, 4.53 in. X 2.5 in. Flow Capacity (ARI Standard 710.86) Tone at 1 psi Delta P Refrigerant 134a=4.1, R-22=4.4, R410A=4.5, R-404A/R507=2.9. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Hard starts relay and start capacitor combination, gives maximum torque possible for all single phase units from 1/12 through 10 HP. The simple 2 wire connection is Voltage sensing and has instant restart capability. A backup electronic timing circuit protects the compressor.
- Electronic potential relay (EPR) technology and 330 VAC start capacitor
- UL recognized file E146162
- Can be used on PSC and CSIR type compressors
- Voltage sensing 90V-277V
This replaces manufacturers numbers: JMPO-102-4C, 03336A-000. It is a replacement sail switch. It is black in color.
- Replaces industry numbers: 251010, 53-5152, PRS486754, DRS32346A
- Designed for magic-pack, magic-chef, and comfort pack
- 5A at 125VAC, 3A at 250-VAC
- UL Listed
Electric heat COIL KIT. Designed for 5000-Watt at 240-Volt or 3750-Watt at 208-Volt. Comes with installation hardware.
- Welded terminal bolts for low resistance and longer life
- Nichrome heavy gauge construction
- Complete kits contain close wound coil to fit many applications
- 2-male and 2-female bushings, terminal screws, nuts and washers to make a proper repair
A versatile transformer that can be used for many different applications. Accepts input voltages of 120 VAC, 208 VAC and 240 VAC and provides a choice of secondary voltages of 2.5 VAC, 8 VAC, 12 VAC, 16 VAC and 24 VAC. Enclosed frame - plate, foot or knock-out mount.
- Primary VAC: 120-Volt/208-Volt/240-Volt
- Secondary VAC: 2.5, 8, 12, 16 and 24
- VA: 48VA
- Dimensions: 2-1/16 in. x 3-1/4 in. x 2-3/4 in.
Copeland R-410A Scroll Compressor Model ZP25LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 25,095 Btu. R-410a. Single Phase. 208/230 V. Run Cap 35/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP25LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 25,095 Btu
- R-410a
Finally, a product that simplifies the repair of burned or damaged spade terminals when reconnecting or replacing a compressor. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Fits both non-burned and burned terminals
- Connects to the compressor via precision brass cylinders that fit over the terminals and connect with stainless steel set screws
- Easy to install and guaranteed for the life of the compressor
- Wires are permanently attached
- Standard factory 600V, 65 strand machine wire