Searched for "40101600"
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.
- Brass construction
- Industry standard cap
- Neoprene seal
- 1/4 in.
Ceramic fuse link for HX Fan Coil Units
- Yellow color code
- Opens at 300 degree F
- GSA approved
- Provides reliable back-up protection for temperature controlling thermostats.
- Applied to millions of appliances and personal care products.
- Used in office machines, portable heaters and industrial equipment as a thermal safeguard.
- 10 Amps @ 250VAC
Hard start relay and start capacitor, gives additional starting torque up to 500%. For all single phase 120/288VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For severe Low-Voltage or hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 thru 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.
- Foot mount
- Primary: 120-Volt / 208-Volt / 240-Volt
- Secondary: 24-Volt
- Output VA: 40 VA
This is a genuine part. Built with durability in mind. Transformer.
- 230-Volt to 24-Volt - for use with GOODMAN and Amana equipment
- Transformer
- Color: gray
- 240-Volt
Heavy-Duty Round Brass Cap with Neoprene Seal. Textured Grip Sides with Handy Core Wrench Top. Designed to fit standard 1/4 in. SAE male refrigeration fittings.
- Made of CDA 360 brass
- Core wrench top
- Neoprene seal
- Manufactured to fit 1/4 in. SAE fittings per ARI 720-97
Fusible link assemblies are safety devices mounted in ceramic holders. Tear drop shaped ceramic holders with a screw mounting hole at the small end and two 1/4" quick connects for convenient hook-up. Open: 300 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- Sold 5 per pack
Hardstart relay and start capacitor, gives additional starting torque up to 300% for all single phase 120/288 VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For low voltage and hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 through 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
This replaces manufacturers numbers: JMPO-102-4C, 03336A-000. It is a replacement sail switch. It is black in color.
- Replaces industry numbers: 251010, 53-5152, PRS486754, DRS32346A
- Designed for magic-pack, magic-chef, and comfort pack
- 5A at 125VAC, 3A at 250-VAC
- UL Listed
Hard starts relay and start capacitor combination, gives maximum torque possible for all single phase units from 1/12 through 10 HP. The simple 2 wire connection is Voltage sensing and has instant restart capability. A backup electronic timing circuit protects the compressor.
- Electronic potential relay (EPR) technology and 330 VAC start capacitor
- UL recognized file E146162
- Can be used on PSC and CSIR type compressors
- Voltage sensing 90V-277V
Liquid Line Solid Core Filter Drier. 3 in. ODF, 6.22 in. x 2.5 in. Flow Capacity (ARI Standard 710.86) Tons at 1 psi Delta P Refrigerant 134A=4.4, R-22=4.8, R410A=4.9, R-404A/R507=3.2. Economical system protection for residential air. conditioning ODF - solid copper connections for easy installation Solid core construction with 40 micron filtration Maximum working pressure = 680 psi For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Hard start kit 3-1/2, 4, 5
- High-quality steel housing for enhanced durability
- Conveniently holds water at a capacity of up to 19 gal.
- Efficiently operates at a maximum pressure of up to 100 PSI
- Electrostatically applied polyester paint resists corrosion
ACS-4 In-line switch is designed to detect condensate drain line clogs or blockages and shut off equipment or alert users to the potential overflow condition. ACS-4 installs on 3/4 in. PVC condensate drain pipe in either a horizontal or vertical position. Using the included 3/4 in. drain pan fitting, ACS-4 can also be installed directly at the drain pan primary or auxiliary outlet to detect pan overflow.
- Installs horizontally or vertically for confined spaces
- Reliable mechanical switch and polymer float
- Shuts off equipment when clog or blockage backs up condensate water in the drain line
- Can be simultaneously be connected to a warning light, audible alarm circuit or BMS/BAS system in addition to connection for equipment shut down
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series. PTC Positive Temperature Coefficient Relay and Capacitor. NATE Recognized (Course #1867-0002). Can be used on PSC type compressors.
- Easy 2-wire installation
- Increase in torque 600%
- Most economic
- UL recognized
Liquid Line Solid Core Filter Drier. 3/8 in. ODF, 4.53 in. X 2.5 in. Flow Capacity (ARI Standard 710.86) Tone at 1 psi Delta P Refrigerant 134a=4.1, R-22=4.4, R410A=4.5, R-404A/R507=2.9. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
The 5-2-1 compressor saver protects vital air conditioner components by significantly reducing the amount of time it takes for your compressor to start, in some cases up to 50%. This means that your air conditioner and compressor will bear half the stress, strain, and heat each and every time it starts. This compressor might save thousands of dollars by not having to replace the air conditioner.
- 3 wire hard start kit is pre-wired potential relay and start capacitor
- Reduces time compressor is on high amp start up, which helps prevent the dimming effect of household lighting
- Three color coded wires to connect for ease of installation Instant re-start
- For use on reciprocating and scroll compressors
Copeland R-410A Scroll Compressor Model ZP21LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 30,799 Btu. R-410a. Single Phase. 208/230 V. Run Cap 40/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP31LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 30,799 Btu
- R-410a
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF, 6.31 in. x 2.63 in. R-410A Flow Capacity Tons at 1 psi Delta P 5.2. Economical system protection for residential air conditioning and ODF - solid copper connections for easy installation . Solid core construction with 40 micron filtration, Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
20162904 GOODMAN Replacement Furnace Pressure Switch complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that 20162904 replacement Furnace Pressure Switch is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
The only valve with a permanent, patented gasket to provide 50 times more sealing area then standard O-ring type valves. Safe for use on the Low Side of R410 systems. A sealing force of over 180 in. lbs., torque tested with 450 lbs. pressure tested at 250F. Patented valve gasket provides 50 times more sealing area than competitive O-ring types.
- Corrosion resistant
- Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
- 500 psi maximum pressure
- Non-positional mounting, no adapter valve required
- Requires only 2 in. clearance for installation and operation
- Hex key wrench included
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Thermostatic expansion aalves (TXVs) are: a requirement for 14 SEER or higher split system heat pumps
- A requirement for many condensers or heat pump systems that use the new R-410A refrigerant
- Your system will operate more precisely and with greater efficiency with a TXV
- Danfoss fixed txv kit, 2.5-Ton
110 VAC to 125VAC Solid-state Hardstart Relay, includes relay, overload and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/4 HP to 1/3 HP compressors. Maximum RLA 6.8 Amps.
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL recognized
- Made in China
Open end yarns finished in a modern soft-flow machine for optimum whiteness. Bale packed for economy and value. 86% virgin cotton 14% polyester. 1 lbs. per dozen.
- Made from virgin cotton and polyester for softness and comfort
- Open-end yarns finished in the soft-flow machine for whiteness
- Machine washable for convenient cleaning
- White color offers an elegant look and feel