Searched for "40101600"
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.
- Brass construction
- Industry standard cap
- Neoprene seal
- 1/4 in.
Hard start relay and start capacitor, gives additional starting torque up to 500%. For all single phase 120/288VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For severe Low-Voltage or hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 thru 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.
- Foot mount
- Primary: 120-Volt / 208-Volt / 240-Volt
- Secondary: 24-Volt
- Output VA: 40 VA
This is a genuine part. Built with durability in mind. Transformer.
- 230-Volt to 24-Volt - for use with GOODMAN and Amana equipment
- Transformer
- Color: gray
- 240-Volt
Liquid Line Solid Core Filter Drier. 3 in. ODF, 6.22 in. x 2.5 in. Flow Capacity (ARI Standard 710.86) Tons at 1 psi Delta P Refrigerant 134A=4.4, R-22=4.8, R410A=4.9, R-404A/R507=3.2. Economical system protection for residential air. conditioning ODF - solid copper connections for easy installation Solid core construction with 40 micron filtration Maximum working pressure = 680 psi For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Hardstart relay and start capacitor, gives additional starting torque up to 300% for all single phase 120/288 VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For low voltage and hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 through 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
Heavy-Duty Round Brass Cap with Neoprene Seal. Textured Grip Sides with Handy Core Wrench Top. Designed to fit standard 1/4 in. SAE male refrigeration fittings.
- Made of CDA 360 brass
- Core wrench top
- Neoprene seal
- Manufactured to fit 1/4 in. SAE fittings per ARI 720-97
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series. PTC Positive Temperature Coefficient Relay and Capacitor. NATE Recognized (Course #1867-0002). Can be used on PSC type compressors.
- Easy 2-wire installation
- Increase in torque 600%
- Most economic
- UL recognized
Hard starts relay and start capacitor combination, gives maximum torque possible for all single phase units from 1/12 through 10 HP. The simple 2 wire connection is Voltage sensing and has instant restart capability. A backup electronic timing circuit protects the compressor.
- Electronic potential relay (EPR) technology and 330 VAC start capacitor
- UL recognized file E146162
- Can be used on PSC and CSIR type compressors
- Voltage sensing 90V-277V
Liquid Line Solid Core Filter Drier. 3/8 in. ODF, 4.53 in. X 2.5 in. Flow Capacity (ARI Standard 710.86) Tone at 1 psi Delta P Refrigerant 134a=4.1, R-22=4.4, R410A=4.5, R-404A/R507=2.9. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
ACS-4 In-line switch is designed to detect condensate drain line clogs or blockages and shut off equipment or alert users to the potential overflow condition. ACS-4 installs on 3/4 in. PVC condensate drain pipe in either a horizontal or vertical position. Using the included 3/4 in. drain pan fitting, ACS-4 can also be installed directly at the drain pan primary or auxiliary outlet to detect pan overflow.
- Installs horizontally or vertically for confined spaces
- Reliable mechanical switch and polymer float
- Shuts off equipment when clog or blockage backs up condensate water in the drain line
- Can be simultaneously be connected to a warning light, audible alarm circuit or BMS/BAS system in addition to connection for equipment shut down
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
Liquid Line Solid Core Filter Drier, 3/8 in. ODF, 5.43 ft. x 2.5 in. Flow Capacity (ARI STD 710.86) Tons at 1 psi Delta P Refrigerant 134a=3.8, R-22=4.1, R410=4.2, R-404a/R507=2.7. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
- Magic-Pak Transformer
- Use with 36HWC, 48HWC, and 60HWC Model Units
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF 5.63 in. x 2.6 in., R-410A. Flow Capacity Tons at 1 psi Delta P 5.1. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF, 6.31 in. x 2.63 in. R-410A Flow Capacity Tons at 1 psi Delta P 5.2. Economical system protection for residential air conditioning and ODF - solid copper connections for easy installation . Solid core construction with 40 micron filtration, Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Fusible link assemblies are safety devices mounted in ceramic holders. Tear drop shaped ceramic holders with a screw mounting hole at the small end and two 1/4" quick connects for convenient hook-up. Open: 300 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- Sold 5 per pack
Ceramic fuse link for HX Fan Coil Units
- Yellow color code
- Opens at 300 degree F
- GSA approved
- Provides reliable back-up protection for temperature controlling thermostats.
- Applied to millions of appliances and personal care products.
- Used in office machines, portable heaters and industrial equipment as a thermal safeguard.
- 10 Amps @ 250VAC
The only valve with a permanent, patented gasket to provide 50 times more sealing area then standard O-ring type valves. Safe for use on the Low Side of R410 systems. A sealing force of over 180 in. lbs., torque tested with 450 lbs. pressure tested at 250F. Patented valve gasket provides 50 times more sealing area than competitive O-ring types.
- Corrosion resistant
- Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
- 500 psi maximum pressure
- Non-positional mounting, no adapter valve required
- Requires only 2 in. clearance for installation and operation
- Hex key wrench included
White-Rodgers suction line drier system protector. Remove and filters refrigerant with 40 micron filtration. 5/8 in. ODF. For use with CFC, HCFC and HFC refrigerants.
- 5/8 in. ODF
- 5.74 in. x 2.5 in. (L x W)
- For use with CFC, HCFC and HFC refrigerants
- Maximum working pressure of 680 psi
- Solid core construction with 40 mic filtration
- ODF - solid copper connections for easy installation
A versatile transformer that can be used for many different applications. Accepts input voltages of 120 VAC, 208 VAC and 240 VAC and provides a choice of secondary voltages of 2.5 VAC, 8 VAC, 12 VAC, 16 VAC and 24 VAC. Enclosed frame - plate, foot or knock-out mount.
- Primary VAC: 120-Volt/208-Volt/240-Volt
- Secondary VAC: 2.5, 8, 12, 16 and 24
- VA: 48VA
- Dimensions: 2-1/16 in. x 3-1/4 in. x 2-3/4 in.
The 5-2-1 compressor saver protects vital air conditioner components by significantly reducing the amount of time it takes for your compressor to start, in some cases up to 50%. This means that your air conditioner and compressor will bear half the stress, strain, and heat each and every time it starts. This compressor might save thousands of dollars by not having to replace the air conditioner.
- 3 wire hard start kit is pre-wired potential relay and start capacitor
- Reduces time compressor is on high amp start up, which helps prevent the dimming effect of household lighting
- Three color coded wires to connect for ease of installation Instant re-start
- For use on reciprocating and scroll compressors
Copeland R-410A Scroll Compressor Model ZP21LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 30,799 Btu. R-410a. Single Phase. 208/230 V. Run Cap 40/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP31LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 30,799 Btu
- R-410a
GOODMAN OEM Pressure Switch. Style: Air. This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Genuine OEM replacement part
- For use in Amana and GOODMAN equipment
- OEM part requires no modification for easy installation
- GMPN080-4, 100-4, 120-5, GDT115-5, MNT060, GMNT100-4, GDS81155CNA
2 tools in 1. A core wrench and thread chaser cap, complete with a core carrying case and 6 cores. The valve cores are stainless steel and brass. The cores are rated for CFC, HCFC and HFC refrigerants. The cores are pressure rated for R410A and manufactured to ARI 720-97 standard.
- Carrying case can hold several additional cores
- Multi-use tool acts as cap for carrying case
- Length: 3.5 in.
- 6 valve cores included
Precision machined from high grade brass and covered by shielding aluminum shroud, and special tools are needed to apply/remove Novent caps. All caps are embossed and color-coded. Proper installation helps stop accidental refrigerant mixing in A/C systems.
- Resists crushing and removal without key
- Corrosion resistant anodized aluminum
- Integral neoprene O-ring resists oils and sealants
- Torque limiter prevents overtightening
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Goodman OEM thermal expansion valve
- Tons: 1.5-Ton to 2.0-Ton
- Refrigerant R-410A
- 1.5-ton, 2.0-ton non-bleed txv kit
Hermetically designed moisture indicator with 3% relative humidity sensitivity, intended for use on refrigerant lines. 3% relative humidity indication compared to 10% paper indicators. Accurate color calibration at low ppm levels and higher temperatures. Wide angle viewing/ high visibility window for ease of monitoring.
- All brass corrosion resistant body
- Fully hermetic design
- Maximum working pressure: 680 psi
- Tri color coded: blue/purple/pink
- Goodman OEM Reversing Valve Solenoid Coil
- Goodman OEM Reversing Valve Solenoid Coil
- Replacement Kit Service Part # B1225022S
- OEM part requires no modification for easy installation
- Be sure to reference furnace model and version for appropriate replacement part
SF8403 Access valves are permanent access ports for use on all refrigerants including R-410A. The SF8403 has a 1/4 in. SAE fitting with a 3/16 in. Dia. x 2 in. long copper tube extension and is designed to meet ARI standards. The valve core material is stainless steel and brass and works well with all types of refrigerant. SF8403 comes with (1) valve core and (1) brass cap and O-ring.
- Manufactured per ARI 720-97
- Brass fitting with brazed copper tube construction
- Fits 3/16 in. O.D.
- 6 access valves per pack
MUELLER STREAMLINE 1-1/8 OD ACR PXP LR 45EL. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP03044
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
Copeland R-410A Scroll Compressor. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 41,480 Btu. R-410a. Single Phase. 208/230 V. Run Cap 45/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP42LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 41,480 Btu
- R-410a
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Thermostatic expansion aalves (TXVs) are: a requirement for 14 SEER or higher split system heat pumps
- A requirement for many condensers or heat pump systems that use the new R-410A refrigerant
- Your system will operate more precisely and with greater efficiency with a TXV
- Danfoss fixed txv kit, 2.5-Ton
Electric heat COIL KIT. Designed for 5000-Watt at 240-Volt or 3750-Watt at 208-Volt. Comes with installation hardware.
- Welded terminal bolts for low resistance and longer life
- Nichrome heavy gauge construction
- Complete kits contain close wound coil to fit many applications
- 2-male and 2-female bushings, terminal screws, nuts and washers to make a proper repair
Copeland R-410A Scroll Compressor Model ZP31LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 25,095 Btu. R-410a. Single Phase. 208/230 V. Run Cap 35/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP25LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 25,095 Btu
- R-410a
0130F00041 GOODMAN Replacement Furnace Pressure Switch complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that 0130F00041 replacement Furnace Pressure Switch is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
Mueller Streamline 3/4 OD ACR P X P COUPLG. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP10157
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
MUELLER STREAMLINE 7/8 OD ACR PXP LR 45 ELL. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP03034
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
Copeland R-410A Scroll Compressor Model ZP16LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Cr Models. 24,000 Btu. 200/230 V. Single Phase. R22 / 407c. Stub Connections. Square Mount Base. Updated Power Supply. Mfg #CR24K6E-PFV-925
- Aftermarket Replacement Compressor
- Drop In Replacement For Cr Models
- 24,000 Btu
- 200/230 V
Universal Shield Locking cap 4 pack. All brass design, no corrosion. Comes with two warning stickers and one bit. Waterproof black universal sleeves.
- Universal locking cap 1/4 in.
- Secure, tamper resistant locking cap
- Waterproof color-coded caps
- All brass, corrosion-resistant design
- Deters refrigerant theft and huffing, provides greater security than any other cap on the market
MUELLER STREAMLINE ACR Press Reducer, P x P, 3/4" x 5/8 OD. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP01029
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
Copeland R-410A Scroll Compressor Model ZP25LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 51,643 Btu. R-410a. Single Phase. 208/230 V. Run Cap 70/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP51LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 51,643 Btu
- R-410a
High Altitude Pressure Switch for 33" Furance Single Stage 80%
- Source 1
- Model S1-1PS3302
- 33"
- Single Stage
Copeland R-22 Reciprocating Compressor. 3.0 Ton. Reciprocating. 32,700 Btu. 35/440 Capacity. 75.0 LRA. 16.0 RLA. 0.38" Liquid: 0.75" Suction. 7.5 x 7.5" Mounting Center. 13.5" Height. Mfg #CR33KQ-PFV-980WB
- 3.0 Ton
- Reciprocating
- 32,700 Btu
- 35/440 Capacity
Totaline Universal Thermal Expansion Valve, R-410A, 2.5 - 4 Ton. Mfg #P530-4254
- Totaline Thermal Expansion Valve
- R-410A Refrigerant Applications
- 2.5 - 4 Ton Units
- Universal Aftermarket