Searched for "40101700"
The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Superior performance is due to the special composite foam center which is much more structurally sound than cork
- It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
- Most effective vibration dampening pad available on the market
- EVA pad outperforms cork and rubber by a margin of greater than 3:1
- Designed to withstand 50 psi
The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This is a switching relay is a 2 Pole relay with 24 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 24 Hz
- Coil DC resistance 17.5
- Coil MA 334
- Coil nominal VA 9.5
- Coil inrush VA 22
Enclosed fan relay type 184, 24-Volt coil, SPNO-SPNC. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Normally opened / closed type
- 1/4 in. spade connections 5 pin
- Coils frequency 50 Hz/60 Hz
- Time delay relay. 24 volt coil
- On: 1-25 seconds. Off: 65-115 seconds
- Replacement for Goodman B13707-38
- UL® and CSA® approved
- 24 volt control circuit
- Five second delay between all subsequent stages, unless they function together
- Used on gas and electric units
Enclosed fan relay type 84, 24-Volt coil, SPNO. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Switch action single pole, normally open
- Coils frequency 50 Hz/60 Hz
- Spade connections
24-Volt Heat Sequencer, fan and electric, 2-Switches. On Timings, 30-90 seconds. Off timings 1-30 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac.All single pole include shunt. It also inludes lugs, spade terminals and covers.The coils have class B insulation.
- Definite purpose contactors
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- SEQUENCER B12565-52
- HVAC application
- Dimensions: 4 in. x 23.75 in. x 30.75 in.
- Quality build
24-Volt Heat Sequencer. Fan and electric, 1-switch. On timings, 1-20 Seconds. Off timings 40-110 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). 24-Volt input control Multi-pose mounting Any contacts (except M1 and M) can be used as auxiliary contacts Double quick-connect terminals for combination loads Ambient Temperature Rating: -50 to Plus165 ° F UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 1 switch
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
The 90-370 heavy-duty general-purpose relay for heating and cooling applications and general switching. This is a totally enclosed relay, which operates in any position. This relay provides general-purpose switching for heating and cooling applications.
- SPDT
- 24V VAC coil, 50/60hz
- Resistive DC OHMS 77
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
The Emerson 90-244 2 pole is a definite purpose contactor for air conditioning and heating equipment. This contactor features low VA coil for cooler operation. The universal mounting bracket fits existing mounting holes. 24 VAC. 30 Amp.
- Low voltage coil for increased life
- Quiet operation
- Universal mounting bracket fits most applications
- Double break contacts ensure positive make and break
- 24-Volt AC
- Resistance DC OHMS 11
- Current MA 150
- Nominal VA 6
- Maximum inrush VA 32
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- HVAC application
- Dimensions: 11.25 in. x 8 in. x 0.5 in.
- For use with GOODMAN and Amana equipment
- PCB, defrost control
This definite purpose contactor meets UL508 specifications for devices up to 600 Vac. The coils have class B insulation. It includes lugs, spade terminals and covers.
- 180/150/120 locked rotor Amps
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Voltage: 208/230
- Compatibility: GOODMAN equipment
- Horse power: 1/6
- Motor, service
Supply your technicians with only the best components to get the job done the right way the first time. These contactors are manufactured from the highest quality materials. Backed by designs that are tried and tested to perform.
- Accordance with U.L. bulletin no. 508 Industrial control equipment, contactors meet specifications for devices up to 600 VAC
- Coils have class B insulation
- Includes lug, spade terminals, and covers
- Single pole include shunt
This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.
- Brand Compatibility: Goodman
- coil tubing assy
- Manufactured in the United States
- 2.5 Ton
The 24A34 series electric heat sequencer is a direct replAcement for most fan and heat sequencing functions. This electric heat sequencer features 2 switches and multi-poise mounting. 24 volt input control.
- Terminal markings are equivalent to other types
- 24-Volt input control
- Multi-poise mounting
- Double quick-connect terminals for combination loads
- 1 switch
- On timings 30 - 90 seconds
- Off timings 1 - 30 seconds
Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.
- Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
- Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
- Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
- Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
- Textured surface prevents equipment sliding
- UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
- Water vapor evaporates through the UltraLite, preventing the expansion of cracks
- UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
- Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed R410 TXV (non-bleed type)
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
GENTEQ 1/2 HP CT Dual Voltage ECM Motor X13 Replacement. Drop-In Replacement For Oem Constant Torque Ecm Indoor Blower Motors. All New Dual Voltage Design For Added Flexibility (115/208-230). Pre-Programmed For Truck Stock And Ready To Use Out Of The Box. Rotation Sensing Technology Eliminates Guesswork. Mfg #6205X
- Drop-In Replacement For Oem Constant Torque Ecm Indoor Blower Motors.
- All New Dual Voltage Design For Added Flexibility (115/208-230).
- Pre-Programmed For Truck Stock And Ready To Use Out Of The Box.
- Rotation Sensing Technology Eliminates Guesswork.
Century Open Lead End Outdoor Drip Proof Condenser Motor
- 1/4 HP
- 208 - 230 Volts
- 1075 RPM
- 1.5 Rated Amps
- 1.9 Max Amps
- 1-Speed
- Sleeve Bearings
- 60 degree C Ambient
- Class "B" Insulation
- Reversing Plug
- Resilient Rings Included for Refrigeration Applications
- 1-5/8" Extended Thru Bolts
- Vertical Shaft Up / Horizontal
- 48 Frame
- 5-5/8" diameter motor
- 60 Hz
- 26" Color Coded Leads
- 1/2" Diameter Flatted Shaft
- Auto Protector
- Applications: Outdoor air conditioning unit, Heat pumps and refrigeration condensation
- Permanent split capacitor motor
- Reversible rotation
- Automatic thermal overload
- All Angle Mount
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac. All single pole include shunt. It also includes lugs, spade terminals and covers. The coils have class B insulation.
- Definite purpose contactors
- 40 resistive Amps
- 30 inductive Amps
- 180/150/120 locked rotor Amps
OEM replacement part for First Co. units. AC and heating control board for HB/MB/UCQ units. This board no longer has yellow wire connections.
- Time delay
- pump timer
- fan delays
- TT connections for boilers
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- Diversitechs most popular pad due to its rugged durability, strength, and clean looks
Natural rubber pads, designed to reduce vibration and noise emanating from refrigeration and air conditioning equipment. Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Circular design in each pad offers a suction cup effect, which eliminates the need to bolt the pads down
- Standard 18 (46cm) pad is divided into eighty-one 2 (5cm) segments, each of which may be cut or torn to provide smaller pads
- 50 durometer pads will withstand a load of 180 psi with greater resiliency
- Easy to use and install
Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed piston type metering device
- Factory installed 5kW electric heat
CONT2P040024VS GOODMAN Replacement Air Handler Contactor complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that CONT2P040024VS replacement Ceiling Mount Air Handler Contactor is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. They offer an efficient design with low VA coil ratings and straight-through wiring.
- Ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Century Open Lead End Outdoor Drip Proof Condenser Motor
- 1/3 HP
- 208 - 230 Volts
- 1075 RPM
- 1.9 Rated Amps
- 2.6 Max Amps
- 1-Speed
- Sleeve Bearings
- 60 degree C Ambient
- Class "B" Insulation
- Reversing Plug
- Resilient Rings Included for Refrigeration Applications
- 1-1/2" Extended Thru Bolts
- Vertical Shaft Up / Horizontal
- 48 Frame
- 5-5/8" diameter motor
- 60 Hz
- 26" Color Coded Leads
- 1/2" Diameter Flatted Shaft
- Auto Protector
- Applications: Outdoor air conditioning unit, Heat pumps and refrigeration condensation
- Permanent Split Capacitor
- Reversible Rotation
- Automatic overload
- All Angle Mount
- JB Industries PATRIOT 2-Valve Brass Manifold,80 mm A2L Gauges, R410A, R32, R454B
- Rugged bar design paired with easy-to-grip metal handles
- Original free floating dual O-ring sealing system for faster evacuation and charging
- Surge dampened gauges for reduced needle movement
- 360 Degree swiveling hose holders
- Pull-out proof hanging hook
- Solid brass forging
- 1 year warranty; lifetime on bar
- MFG# 22625
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 1.5 ton
- 208/240v
- 24v controls
- 6kW with piston
Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.
- Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
- Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
- Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
- Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
- Textured surface prevents equipment sliding
- UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
- Water vapor evaporates through the UltraLite, preventing the expansion of cracks
- UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
- Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Voltage: 208/230
- Compatibility: GOODMAN equipment
- Horse power: 1/6
- Motor 1/6HP 1SP 8PL
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
Century Totally Enclosed Outdoor Condenser Motor
(Capacitor Not Included)
- 1/4 HP
- 208 - 230 Volts
- 1075 RPM
- 2.0 Rated Amps
- 1-Speed
- Sleeve Bearings
- 60 degree C Ambient
- Class "B" Insulation
- Reversing Plug
- 1/2" Hub on Shaft End Frame with Slinger
- 36" Leads
- All Angle Mount
- 1/2" diameter shaft double flat
- 48 Frame
- 60 Hz
- Applications: Outdoor air conditioning unit. Heat pumps and refrigeration condensation. Motors can be mounted horizontally or vertically
- Permanent Split Capacitor
- Reversible Rotation
- Automatic overload
- Energy efficient
Century Totally Enclosed Outdoor Condenser Motor
(Capacitor Not Included)
- 1/3 HP
- 208 - 230 Volts
- 825 RPM
- 2.1 Rated Amps
- 1-Speed
- Sleeve Bearings
- 70 degree C Ambient
- Class "F" Insulation
- Four Mounting Holes in Shell
- 48" Leads
- All Angle Mount
- 1/2" diameter shaft double flat
- 48 Frame
- 60 Hz
- Applications: Outdoor air conditioning unit. Heat pumps and refrigeration condensation. Motors can be mounted horizontally or vertically
- Permanent Split Capacitor
- Reversible Rotation
- Automatic overload
- Energy efficient
Fasco Condenser Motor
- 1/5 H.P.
- 208-230 Volts
- 1.3 Amps
- CW Rotation
- POC5 Capacitor
- 1075 RPM
- Sleeve Bearings
- 5-5/8" Diameter
- Totally-Enclosed Enclosure
- Stud Mounting
- 4-1/8" Shaft Length
- Permanent Split Capacitor Motor Type
- 48 Frame
- Automatic Overload
- 1 Phase
- 1/2" Shaft Diameter
- 60 Hertz
- 1/2" x 4-1/8" Shaft Dimension
- 3-3/4" Length Less Shaft
Johnson Controls 4 Ton Vertical Cased Coil - 24.5" Cabinet Width
- 4 Ton
- Designed in the USA
- Vertical Cased
- 24.5" Cabinet Width
Fan And Heat Sequencer. On 1 To 20 Seconds. Off 40 To 110 Seconds. 24 Volt Control Circuit. Five Second Delay Between All Subsequent Stages, Unless They Function Together. 40 To 110 Seconds Off Time. Mfg #ELE-NS103
- On 1 To 20 Seconds
- Off 40 To 110 Seconds
- 24 Volt Control Circuit
- Five Second Delay Between All Subsequent Stages, Unless They Function Together
This is a genuine Goodman replacement part. This condenser fan blade can be used in condensing units. It is gray in color to blend with other components.
- Number of blades: 3
- Diameter: 18 in.
- Pitch degree: 33 degree s
- Rotation: CCW
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Johnson Controls 5 Ton Vertical Cased Coil - 21" Cabinet Width
- 5 Ton
- Designed in the USA
- Vertical Cased
- 21" Cabinet Width
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. They offer an efficient design with low VA coil ratings and straight-through wiring.
- Ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Small products come with big performance. Designed to perform under stressful conditions. These contactors pack a punch.
- Contactors meet UL508 specifications for devices up to 600 VAC
- Coils have class-B insulation
- Includes lugs, spade terminals and covers
- All single pole include shunt