The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. This two-in-one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with extended shank to accommodated up to 2 1/2 IN of insulation, NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar).

• Lead free copper alloy body construction
• Extended shank for thick tank insulation up to 2 1/2 inches
• Extension thermostat with thermo-bonded coating
• Stainless steel spring
• Pressure relief range is 75 to 150 psi
• ASME rated, CSA Listed
• NPT male inlet and NPT female outlet connections
• Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
• ANSI Z21.22 certified
• Includes test lever and stainless steel spring

Featuring an integrated recirculation pump and heat exchangers composed of high quality stainless steel, the NRCR is designed to provide homeowners with reliable and faster hot water for years to come. The NRCRs revolutionary burner control eliminates issues with high incoming water temperatures in the summer by reducing effective BTU output to less than 5,000 BTU, an industry first. Noritz' NRCR models feature an integrated recirculation pump, stainless steel heat exchangers with 15 year warranty, and are the only units with a pump that is flex vent capable.

• NRCR features a 0.95 UEF rating, making it one of the most efficient units in the industry
• NRCR units have three recirculation modes: 1. on-demand mode 2. recirculation mode 3. crossover mode
• The NRCR features a 15 year warranty on its heat exchanger, which is composed of high quality stainless steel and designed for easier serviceability.
• Revolutionary tankless water heater features a super low BTU mode with its burner control, which reduces BTU output to less than 5,000 BTU
• Built with an integrated pump allowing a 1/2 in. loop with a length of up to 200 ft. (or 3/4 in up to 500 ft.), the longest in the industry.
• NRCR has a default learning mode that adjusts to your hot water usage
• Unit is Wi-Fi-capable, which allows for wireless control from your smart device. The NWC-adapter is sold separately
• NRCR can be installed indoors or outdoors; outdoor installations require an outdoor vent cap, VC-6-1, sold separately.
• On-demand recirculation mode requires the WLB, wireless on-demand button kit, sold separately.
• Crossover recirculation mode requires a crossover bypass valve kit (CSV-BPK), sold separately

The 3/4" P1500XL Calibrated Pressure Relief Valve protects against excessive pressure buildup on cold water service lines. The P1500XL is for pressure only, and is utilized in conjunction with other temperature-limiting devices. Features include field adjustable settings from 25 to 175 psi with calibration marks etched on the stem, and a cast bronze valve body with stainless steel internals and springs. Suitable for static relief, low capacity pump relief, passive solar, and thermal expansion relief applications, it can also be used in similar capacities for both commercial and industrial applications.

• Suitable for static relieve, low capacity pump relief, passive solar, expansion relief and a variety of commercial and industrial applications ensures you get the most for your money
• Male NPT inlet and female NPT outlet provide easy installation
• Protection against excessive pressure buildup on cold water service lines
• Suitable for static releive, low capacity pump relief, passive solar, expansion relief and a variety of commercial and industrial applications ensures you get the most for your money
• Field adjustable psi settings of 25 to 175 psi add versatility and decrease maintenance time
• Cast bronze main valve body and stainless steel internals/springs protect against corrosion
• Certified to NSF/ANSI 372 by IAPMO R&T
• Lead-free

The NRC98 180,000 BTU Condensing Natural Gas Tankless Water Heater has a maximum of 9.8 GPM. The direct vent system allows 3 or 4 in. PVC or CPVC to be installed. This residential water heater heats water up to 140 and meets federal and state air quality standards which are below 20 PPM.

• 9.8 GPM tankless water heater provides enough hot water to run from 2 to 3 hot water appliances at 1 time
• Tankless gas water heater costs less to operate than electric models
• 12-year warranty on the heat exchanger, 5 parts, plus all Noritz models features a 1-year in-home warranty
• ENERGY STAR qualified tankless water heater is highly efficient and uses up to 40% less energy than storage water heater models
• Superior grade heat exchanger
• High-efficient condensing technology
• Direct vent termination
• Vents with PVC, CPVC and PP
• Energy savings
• Never run out of hot water

Make sure you have hot water when you need it with this EZTR40 40 Gal Tank Replacement Min 0.5 GPM Max 6.6 GPM High Efficiency Liquid Propane Gas Tankless Water Heater Kit. You can use Wi-Fi to control the temperature and to look at usage. Instructions are included for easy installation.

• Professional installation recommended
• Hot and cold water connections are located on top of the unit, not the bottom (like most tank less heaters); this positioning allows the flexible water lines used by the previous tank heater to be quickly and easily reconnected to the new unit
• Optimizes the perfect air/fuel ratio based on demand for better efficiency with less moving parts
• Greater resistance to corrosion and scale buildup than other materials, thereby boosting system life
• Noritz connect app is compatible, allowing for wireless remote control of heater functions, as well as diagnostic and maintenance reminders; the Wi-Fi adapter is sold separately on Homedepot.com
• For smaller home applications
• Flex venting to run through existing B-vent
• Saves installation time
• All venting accessories in one box
• Isolation valve kit included
• Full solution for direct tank replacement
• This unit can only be vented vertically, it cannot be vented horizontally
• Maximum flow rate up to 6.6 GPM at a 30 degree temperature rise

SharkBite Push-to-Connect x Female Pipe Thread Water Heater Connection Kit is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi

The NR981 199,900 BTU Natural Gas Tankless Water Heater has a maximum of 9.8 GPM. The outdoor model allows the flexibility to be installed outdoor. This residential water heater heats water up to 140 degree and meets federal and state air quality standards which are below 20 PPM.

• 9.8 GPM tankless water heater provides enough hot water to run from 2 to 3 hot water appliances at 1 time
• Tankless gas water heater costs less to operate than electric models
• 12-year warranty on the heat exchanger, 5 parts, plus all Noritz models features a 1-year in-home warranty
• ENERGY STAR qualified tankless water heater is highly efficient and uses up to 40% less energy than storage water heater models
• Superior grade heat exchanger
• Non-condensing technology
• Outdoor venting
• No venting required
• Energy savings
• Never run out of hot water

The 1/2" P1500XL Calibrated Pressure Relief Valve protects against excessive pressure buildup on cold water service lines. The P1500XL is for pressure only, and is utilized in conjunction with other temperature-limiting devices. Features include field adjustable settings from 25 to 175 psi with calibration marks etched on the stem, and a cast bronze valve body with stainless steel internals and springs. Suitable for static relief, low capacity pump relief, passive solar, and thermal expansion relief applications, it can also be used in similar capacities for both commercial and industrial applications.

• Male NPT inlet and female NPT outlet provide easy installation
• Protection against excessive pressure buildup on cold water service lines
• Suitable for static releive, low capacity pump relief, passive solar, expansion relief and a variety of commercial and industrial applications ensures you get the most for your money
• Field adjustable psi settings of 25 psi to 175 psi add versatility and decrease maintenance time
• Cast bronze main valve body and stainless steel internals/springs protect against corrosion
• Certified to NSF/ANSI 372 by IAPMO R and T
• Lead free
• Easy to install
• Trusted name
• 1 point of contact for service

The P1000AXL-30C Pressure Relief Valve is set at 30 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

• Eliminates risk of over-pressure of storage tanks
• Epoxy-coating adds extra protection
• Pressure relief valve set at 30 psi
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Certified to ASME Section IV by National Board
• Easy to install

The NRC661 120,000 BTU Condensing Propane Tankless Water Heater has a maximum of 6.6 GPM. The direct vent system allows 3 in. PVC or CPVC to be installed. This residential water heater heats water up to 140 degree F and meets federal and state air quality standards which are below 20 PPM.

• 6.6 GPM tankless water heater provides enough hot water to run over 1 hot water appliances at 1 time
• Tankless gas water heater costs less to operate than electric models
• 12-year warranty on the heat exchanger, 5 parts, plus all Noritz models features a 1-year in-home warranty
• ENERGY STAR qualified tankless water heater is highly efficient and uses up to 40% less energy than storage water heater models
• Superior grade heat exchanger
• High-efficient condensing technology
• Direct vent termination
• Vents with PVC, CPVC and PP
• Energy savings
• Never run out of hot water

The 1/2 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX, or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue, or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC, and cUPC requirements
• 1/2 in. Pipe Insertion Depth = 15/16 in.

The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

• Eliminates risk of over-pressure of storage tanks
• Epoxy-coating adds extra protection
• Pressure relief valve set at 150 psi
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Certified to ASME Section IV by National Board
• Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility

The Heat Exchanger needs to be flushed to prevent damage from Scale Build-up. Isolation Valves allow for full diagnostic testing and easy flushing of the system. Please refer to the Owners Guide or Installation Manual for more information regarding this procedure.

• Easy to install
• Copper material
• Compatible with:NR501 series NR662 series NR83 series NR981 series NRC661 series NRC711 series NRC98 series NRC1111 series NRC663 series NC380 series (F only)
• Will give the install a nice and clean finished look
• 3/4 in.
• Sweat ISO valves
• Hot water valve included
• Cold water valve included
• Installation manual inside box
• 500,000 BTu/hr pressure relive valve

Our NRC711 series is perfect for homes with 1-3 showers. When properly sized, they provide an endless supply of hot water to an entire home. With state-of-the-art gas combustion technology, Noritz burners maximize output and provide temperature stability while maintaining low emissions. Built-in features include safety lock-out, freeze protection, and high elevation adjustment.

• This ENERGY STAR rated model has a 12-year heat exchanger warranty
• Standard burner high performance single flame burner
• Fully modulating burner automatically adjusts burner level accordingly
• Turbo flow up to 7.1 GPM at 30 degree (Fahrenheit) temperature rise (6.5 GPM at 45 degree rise)
• Direct ignition no standby pilot light
• Thermal fuse automatic overheat protection system
• Resin coated PC board increases durability and protection from elements
• Automatic air regulator monitors internal temperature/maximizes burner efficiency
• Cold water connection size 3/4 in.
• Hot water connection size 3/4 in.
• Gas connection size 3/4 in.
• Safety lock out default maximum 120 degrees Fahrenheit (refer to owner's manual for higher temp)

Make sure you have hot water when you need it with this EZTR40 40 Gal Tank Replacement Min 0.5 GPM Max 6.6 GPM High Efficiency Natural Gas Tankless Water Heater Kit. It allows you to easily control the temperature as well as view your usage.

• Professional installation recommended
• Hot and cold water connections located on top of the unit so existing flexible water lines can be easily reconnected to new unit
• Optimizes the perfect air/fuel ratio based on demand for better efficiency
• Greater resistance to corrosion and scale buildup than other materials
• Compatible with Noritz connect app with the NWC Wi-Fi adapter (sold separately)
• To view usage and control via Wi-fi, requires purchase of Wi-fi Hub (Internet # 304740446)
• Ideal for smaller home applications
• Flex venting to run through existing B-vent
• Saves installation time
• All venting accessories in one box
• Isolation valve kit included
• Full solution for direct tank replacement
• Unit can only be vented vertically, it cannot be vented horizontally
• Maximum flow rate up to 6.6 GPM at a 30 deg. temperature rise

The 1/2 in. x 12 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect water heater to any combination of copper, PEX or CPVC pipe
• Innovative push-fit design makes for quick and easy installation
• Push-fit connections require no solder, glue or unions
• Decreases the amount of time and effort needed to connect water heater to pipe
• Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
• Corrosion resistant to improve longevity
• Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
• Meets IAPMO, UPC, IPC and cUPC requirements
• Lead free
• 1/2 in. pipe insertion depth 15/16 in.

Our NRC711 series is perfect for homes with 1-3 showers. When properly sized, they provide an endless supply of hot water to an entire home. With state-of-the-art gas combustion technology, Noritz burners maximize output and provide temperature stability while maintaining low emissions. Built-in features include safety lock-out, freeze protection and high elevation adjustment.

• 93% thermal efficiency
• Standard burner high performance single flame burner
• Safety lock out default maximum 120 degrees Fahrenheit (refer to owners manual for higher temp)
• Maximum flow rate up to 7.1 GPM at 30 degree (F) temperature rise
• Direct ignition, no standby pilot light
• Minimum activation flow rate 0.50 GPM
• Cold water connection size 3/4 in.
• Hot water connection size 3/4 in.
• Power supply 120 VAC (60 Hz)
• Condensing unit

Ideal for use where Lead-Free fittings are required. Designed for installation on potable water lines to protect against piping system deterioration caused by galvanic and stray current corrosion. A dielectric fitting is necessary where dissimilar metals are used in piping systems.

• 3/4 in. inlet x 1/2 in. outlet dielectric union pipe fitting
• Dielectric fitting is necessary where dissimilar metals are used in piping systems
• Female iron pipe by female copper sweat
• Safe and easy to install
• Body steel with zinc coat
• Union nut steel with zinc coat
• Bolts and nuts steel with zinc coat
• Tailpiece low lead brass
• Insulator nylon
• Gaskets EPDM
• Flexible design couples dissimilar piping materials for ultimate convenience
• Designed for lasting wear on potable water applications protects against pipe deterioration from galvanic and stray current corrosion
• Zinc-coated steel body resists corrosion Female iron pipe x female brass pipe
• Certified to NSF/ANSI 372 by IAPMO R&T

The NRC661 120,000 BTU Condensing Natural Gas Tankless Water Heater has a maximum of 6.6 GPM. The direct vent system allows 3 in. PVC or CPVC to be installed. This residential water heater heats water up to 140 degree F and meets federal and state air quality standards which are below 20 PPM.

• 6.6 GPM tankless water heater provides enough hot water to run over 1 hot water appliances at 1 time
• Tankless gas water heater costs less to operate than electric models
• 12-year warranty on the heat exchanger, 5 parts, plus all Noritz models features a 1-year in-home warranty
• ENERGY STAR qualified tankless water heater is highly efficient and uses up to 40% less energy than storage water heater models
• Superior grade heat exchanger
• High-efficient condensing technology
• Direct vent termination
• Vents with PVC, CPVC and PP
• Energy savings
• Never run out of hot water

Our NRC711 series is perfect for homes with 1-3 showers. When properly sized, they provide an endless supply of hot water to an entire home. With state-of-the-art gas combustion technology, Noritz burners maximize output and provide temperature stability while maintaining low emissions. Built-in features include safety lock-out, freeze protection, and high elevation adjustment.

• This ENERGY STAR rated model has a 12-year warranty on the heat exchanger
• Standard burner high performance single flame burner
• Fully modulating burner automatically adjusts burner level accordingly
• Maximum flow rate of 7.1 GPM at 30 degree temperature rise (6.5 GPM at 45 rise)
• Direct ignition no standby pilot light
• Thermal fuse automatic overheat protection system
• Resin coated PC board increases durability and protection from elements
• Automatic air regulator monitors internal temperature/maximizes burner efficiency
• Cold water connection size 3/4 in.
• Hot water connection size 3/4 in.
• Gas connection size 3/4 in.
• Safety lock out default maximum 120 degree temperature rise (refer to owners manual for higher temp)

The NR981 199,900 BTU Propane Tankless Water Heater has a maximum of 9.8 GPM. The outdoor model allows the flexibility to be installed outdoor. This residential water heater heats water up to 140 and meets federal and state air quality standards which are below 20 PPM.

• 9.8 GPM tankless water heater provides enough hot water to run from 2 to 3 hot water appliances at 1 time
• Tankless gas water heater costs less to operate than electric models
• 12-year warranty on the heat exchanger, 5 parts, plus all Noritz models features a 1-year in-home warranty
• ENERGY STAR qualified tankless water heater is highly efficient and uses up to 40% less energy than storage water heater models
• Superior grade heat exchanger
• Non-condensing technology
• Outdoor venting
• No venting required
• Energy savings
• Never run out of hot water

With more power than any tankless water heater in its class, the NR98 series is ideal for mid-size homes with up to 4 showers. Built-in features include safety lock-out, freeze protection and high elevation adjustment. PVC cannot be used for venting.

• Standard input - gas consumption ranges from 16,000 BTUh to 199,900 BTUh
• Maximum flow rate 9.8 GPM
• Durable steel casing with polyester coating
• Minimum activation flow rate 0.5
• Quick connect - 2 identical units can be linked together by using the optional quick connect cord(QC-at) for twice the hot water capacity
• Available temperature setting up to 140 degree F
• Cold water connection size 3/4 in.
• Hot water connection size 3/4 in.
• Gas connection size 3/4 in.
• Power supply 120-Volt AC (60 Hz)
• Requires category III stainless steel exhaust vent material
• ENERGY STAR

The NRC98 180,000 BTU Condensing Propane Tankless Water Heater has a maximum of 9.8 GPM. The direct vent system allows 3 or 4 in. PVC or CPVC to be installed. This residential water heater heats water up to 140 degree F and meets federal and state air quality standards which are below 20 PPM.

• 9.8 GPM tankless water heater provides enough hot water to run from 2 to 3 hot water appliances at 1 time
• Tankless gas water heater costs less to operate than electric models
• 12-year warranty on the heat exchanger, 5 parts, plus all Noritz models features a 1-year in-home warranty
• ENERGY STAR qualified tankless water heater is highly efficient and uses up to 40% less energy than storage water heater models
• Superior grade heat exchanger
• High-efficient condensing technology
• Direct vent termination
• Vents with PVC, CPVC and PP
• Energy savings
• Never run out of hot water