Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

• The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
• Rheem Professional Classic 38 Gal. Lowboy 6-Year 240-Volt 4500-Watt Electric Tank Water Heater With Top T&p Valve
• Delivers 51 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Short Tank Fits In Tight Applications
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• With ProtectionPlusâ„¢ the 6-year limited tank warranty becomes 10-year
• MFG# XE38S06ST45U1

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

• Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
• Easy to install
• Durable braided stainless steel build
• Highly flexible to resist kinks and creases in tight spaces
• Heavy duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
• 24 in. L
• Lead free and meeting all code requirements
• 5-year warranty

The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.

• Made from durable polypropylene plastic
• Will not corrode or crack
• 26 in. ID
• 28 in. OD
• 1-1.5 in. PVC fitting included
• Pre-cut side outlet
• Recyclable
• Non-toxic
• Black finish
• Use with electric water heaters only

Use this plastic drain pan under your electric water heater to help prevent damage to finished surfaces in the event of a leak from your water heater. It is constructed of durable, flexible polypropylene that will not corrode or crack while installing the water heater. It has a pre-cut drain hole and the PVC fitting is included. It should be plumbed to the outside of the structure, away from finished surfaces, if the water heater is installed inside of the structure or elsewhere where a leak from the unit could cause damage to finished surfaces.

• Made for use under an electric water heater
• Injection-molded polypropylene plastic
• Recyclable
• Black
• PVC drain fitting included
• 28 in. I.D.
• 30 in. O.D.
• Pre-cut drain hole
• Non-toxic
• Recommended that pan has an inside diameter 2 in. - 4 in. larger than the diameter of your water heater tank

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (4-passes)

The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.

• Secures expansion tank to wall
• Galvanized and stainless steel construction
• Supports tanks up to 13 in. Dia
• Supports tanks up to 5 Gal.
• Includes mounting bracket, 2 support straps and mounting screws
• Quick-release stainless steel bands
• Fast and easy installation
• Takes load weight off pipes
• HOLDRITE quick strap brand
• Water heater accessories

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01 in. / 25mm thick
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4 in. FIP connectors
• Chrome plated brass supply nuts
• Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• For use with water only in accessible locations
• Conforms to ASME A112.18.6/CSAB125.6

Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.

• Please refer to instructions for installation
• You cannot install this product contact a qualified person
• Follow safety precautions
• 1 year limited warranty
• Metal construction
• Replacement pilot assembly
• Durable
• Long lasting
• Comes in a single
• Multi-colored finish

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a recessed tank flange

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 12". Mfg #UR3088FX12

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

The Fluidmaster B1H18 18 in. Water Heater Connector is a top choice when replacing your water heater supply line. Installation is fast and easy, with easy grip brass hex nuts, and exceptional flexibility that resists kinks or creases in the tightest spaces. This replacement water heater connector fits 3/4 in. F.I.P. x 3/4 in. F.I.P. connections. Designed with quality in mind this water heater connector showcases a 5 year warranty, durable braided stainless steel materials, and nickel plated heavy duty brass hex nuts. Replace old, creased, or problem water heater connectors with a quality you can trust. Lead free and meeting all code requirements. Upgrade your water heater supply line now, to a Fluidmaster Connector.

• Highly flexible water heater connector that resists kinks and creases
• Easy to install, the heavy-duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P
• 18 in. L
• Lead free, and meeting all code requirements
• Quickly replace risky faulty and old connector models
• 5 year warranty
• Featuring a durable build from braided stainless steel
• Highly flexible to resist kinks and creases in tight spaces
• Repair parts that are made to last

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA Listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

• The Rheem Professional Classic 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional 40 Gal. Medium Electric Water Heater
• 40 Gal. Tank Provides Ample Hot Water For Households With 2 People To 4 People
• Delivers 55 Gal. Of Hot Water In The First Hour
• Uniform Energy Factor 0.93
• Dual 4500 Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240 Volt Connection For Installation
• Medium Tank Profile Fits In A Variety Of Indoor Spaces
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Electric Junction Box Located Above Heating Elements For Easy Installation
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE40 M2 RH95 (4500W)

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks

Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.

• Please refer to instructions for installation
• If you cannot install this product contact a qualified person
• Follow safety precautions
• 1 year limited warranty
• Metal construction
• Replacement burner
• Durable
• Long lasting
• Comes in a single
• Gray finish